blob: 85c23facb9fe6fe141f580b229e25d96cb9354c3 [file] [log] [blame]
/*
* Copyright (C) 2015 Marvell Technology Group Ltd.
*
* Author: Jisheng Zhang <jszhang@marvell.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "marvell,berlin4ct", "marvell,berlin";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
serial0 = &uart0;
};
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_SLEEP_0>;
};
cpu1: cpu@1 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_SLEEP_0>;
};
cpu2: cpu@2 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <0x2>;
enable-method = "psci";
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_SLEEP_0>;
};
cpu3: cpu@3 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <0x3>;
enable-method = "psci";
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_SLEEP_0>;
};
l2: cache {
compatible = "cache";
};
idle-states {
entry-method = "psci";
CPU_SLEEP_0: cpu-sleep-0 {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x0010000>;
entry-latency-us = <75>;
exit-latency-us = <155>;
min-residency-us = <1000>;
};
};
};
osc: osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
pmu {
compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>,
<&cpu1>,
<&cpu2>,
<&cpu3>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0xf7000000 0x1000000>;
gic: interrupt-controller@901000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x901000 0x1000>,
<0x902000 0x2000>,
<0x904000 0x2000>,
<0x906000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
apb@e80000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xe80000 0x10000>;
interrupt-parent = <&aic>;
gpio0: gpio@0400 {
compatible = "snps,dw-apb-gpio";
reg = <0x0400 0x400>;
#address-cells = <1>;
#size-cells = <0>;
porta: gpio-port@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0>;
};
};
gpio1: gpio@0800 {
compatible = "snps,dw-apb-gpio";
reg = <0x0800 0x400>;
#address-cells = <1>;
#size-cells = <0>;
portb: gpio-port@1 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <1>;
};
};
gpio2: gpio@0c00 {
compatible = "snps,dw-apb-gpio";
reg = <0x0c00 0x400>;
#address-cells = <1>;
#size-cells = <0>;
portc: gpio-port@2 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <2>;
};
};
gpio3: gpio@1000 {
compatible = "snps,dw-apb-gpio";
reg = <0x1000 0x400>;
#address-cells = <1>;
#size-cells = <0>;
portd: gpio-port@3 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <3>;
};
};
aic: interrupt-controller@3800 {
compatible = "snps,dw-apb-ictl";
reg = <0x3800 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
};
};
soc_pinctrl: pin-controller@ea8000 {
compatible = "marvell,berlin4ct-soc-pinctrl";
reg = <0xea8000 0x14>;
};
avio_pinctrl: pin-controller@ea8400 {
compatible = "marvell,berlin4ct-avio-pinctrl";
reg = <0xea8400 0x8>;
};
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;
sic: interrupt-controller@1000 {
compatible = "snps,dw-apb-ictl";
reg = <0x1000 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
};
wdt0: watchdog@3000 {
compatible = "snps,dw-wdt";
reg = <0x3000 0x100>;
clocks = <&osc>;
interrupts = <0>;
};
wdt1: watchdog@4000 {
compatible = "snps,dw-wdt";
reg = <0x4000 0x100>;
clocks = <&osc>;
interrupts = <1>;
};
wdt2: watchdog@5000 {
compatible = "snps,dw-wdt";
reg = <0x5000 0x100>;
clocks = <&osc>;
interrupts = <2>;
};
sm_gpio0: gpio@8000 {
compatible = "snps,dw-apb-gpio";
reg = <0x8000 0x400>;
#address-cells = <1>;
#size-cells = <0>;
porte: gpio-port@4 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
};
};
sm_gpio1: gpio@9000 {
compatible = "snps,dw-apb-gpio";
reg = <0x9000 0x400>;
#address-cells = <1>;
#size-cells = <0>;
portf: gpio-port@5 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
};
};
uart0: uart@d000 {
compatible = "snps,dw-apb-uart";
reg = <0xd000 0x100>;
interrupts = <8>;
clocks = <&osc>;
reg-shift = <2>;
status = "disabled";
pinctrl-0 = <&uart0_pmux>;
pinctrl-names = "default";
};
};
system_pinctrl: pin-controller@fe2200 {
compatible = "marvell,berlin4ct-system-pinctrl";
reg = <0xfe2200 0xc>;
uart0_pmux: uart0-pmux {
groups = "SM_URT0_TXD", "SM_URT0_RXD";
function = "uart0";
};
};
};
};