blob: 54dc28351c8cb85a0abbd4bbad554d56dbcbac79 [file] [log] [blame]
/*
* dts file for Xilinx ZynqMP
*
* (C) Copyright 2014 - 2015, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*/
/ {
compatible = "xlnx,zynqmp";
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
enable-method = "psci";
reg = <0x0>;
};
cpu@1 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
enable-method = "psci";
reg = <0x1>;
};
cpu@2 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
enable-method = "psci";
reg = <0x2>;
};
cpu@3 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
enable-method = "psci";
reg = <0x3>;
};
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupt-parent = <&gic>;
interrupts = <0 143 4>,
<0 144 4>,
<0 145 4>,
<0 146 4>;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
};
amba_apu: amba_apu@0 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0 0 0xffffffff>;
gic: interrupt-controller@f9010000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
#interrupt-cells = <3>;
reg = <0x0 0xf9010000 0x10000>,
<0x0 0xf9020000 0x20000>,
<0x0 0xf9040000 0x20000>,
<0x0 0xf9060000 0x20000>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <1 9 0xf04>;
};
};
amba: amba {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
can0: can@ff060000 {
compatible = "xlnx,zynq-can-1.0";
status = "disabled";
clock-names = "can_clk", "pclk";
reg = <0x0 0xff060000 0x0 0x1000>;
interrupts = <0 23 4>;
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
};
can1: can@ff070000 {
compatible = "xlnx,zynq-can-1.0";
status = "disabled";
clock-names = "can_clk", "pclk";
reg = <0x0 0xff070000 0x0 0x1000>;
interrupts = <0 24 4>;
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
};
gem0: ethernet@ff0b0000 {
compatible = "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 57 4>, <0 57 4>;
reg = <0x0 0xff0b0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
};
gem1: ethernet@ff0c0000 {
compatible = "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 59 4>, <0 59 4>;
reg = <0x0 0xff0c0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
};
gem2: ethernet@ff0d0000 {
compatible = "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 61 4>, <0 61 4>;
reg = <0x0 0xff0d0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
};
gem3: ethernet@ff0e0000 {
compatible = "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 63 4>, <0 63 4>;
reg = <0x0 0xff0e0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
};
gpio: gpio@ff0a0000 {
compatible = "xlnx,zynqmp-gpio-1.0";
status = "disabled";
#gpio-cells = <0x2>;
interrupt-parent = <&gic>;
interrupts = <0 16 4>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0xff0a0000 0x0 0x1000>;
};
i2c0: i2c@ff020000 {
compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 17 4>;
reg = <0x0 0xff020000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@ff030000 {
compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 18 4>;
reg = <0x0 0xff030000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
};
pcie: pcie@fd0e0000 {
compatible = "xlnx,nwl-pcie-2.11";
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
msi-controller;
device_type = "pci";
interrupt-parent = <&gic>;
interrupts = <0 118 4>,
<0 117 4>,
<0 116 4>,
<0 115 4>, /* MSI_1 [63...32] */
<0 114 4>; /* MSI_0 [31...0] */
interrupt-names = "misc", "dummy", "intx",
"msi1", "msi0";
msi-parent = <&pcie>;
reg = <0x0 0xfd0e0000 0x0 0x1000>,
<0x0 0xfd480000 0x0 0x1000>,
<0x80 0x00000000 0x0 0x1000000>;
reg-names = "breg", "pcireg", "cfg";
ranges = <0x02000000 0x00000000 0xe0000000 0x00000000
0xe0000000 0x00000000 0x10000000
/* non-prefetchable memory */
0x43000000 0x00000006 0x00000000 0x00000006
0x00000000 0x00000002 0x00000000>;
/* prefetchable memory */
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
pcie_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
sata: ahci@fd0c0000 {
compatible = "ceva,ahci-1v84";
status = "disabled";
reg = <0x0 0xfd0c0000 0x0 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
};
sdhci0: sdhci@ff160000 {
compatible = "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 48 4>;
reg = <0x0 0xff160000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
};
sdhci1: sdhci@ff170000 {
compatible = "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 49 4>;
reg = <0x0 0xff170000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
};
smmu: smmu@fd800000 {
compatible = "arm,mmu-500";
reg = <0x0 0xfd800000 0x0 0x20000>;
#global-interrupts = <1>;
interrupt-parent = <&gic>;
interrupts = <0 157 4>,
<0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
<0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
<0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
<0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>;
};
spi0: spi@ff040000 {
compatible = "cdns,spi-r1p6";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 19 4>;
reg = <0x0 0xff040000 0x0 0x1000>;
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@ff050000 {
compatible = "cdns,spi-r1p6";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 20 4>;
reg = <0x0 0xff050000 0x0 0x1000>;
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
};
ttc0: timer@ff110000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
reg = <0x0 0xff110000 0x0 0x1000>;
timer-width = <32>;
};
ttc1: timer@ff120000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
reg = <0x0 0xff120000 0x0 0x1000>;
timer-width = <32>;
};
ttc2: timer@ff130000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
reg = <0x0 0xff130000 0x0 0x1000>;
timer-width = <32>;
};
ttc3: timer@ff140000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
reg = <0x0 0xff140000 0x0 0x1000>;
timer-width = <32>;
};
uart0: serial@ff000000 {
compatible = "cdns,uart-r1p8";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 21 4>;
reg = <0x0 0xff000000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
};
uart1: serial@ff010000 {
compatible = "cdns,uart-r1p8";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 22 4>;
reg = <0x0 0xff010000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
};
usb0: usb@fe200000 {
compatible = "snps,dwc3";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 65 4>;
reg = <0x0 0xfe200000 0x0 0x40000>;
clock-names = "clk_xin", "clk_ahb";
};
usb1: usb@fe300000 {
compatible = "snps,dwc3";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 70 4>;
reg = <0x0 0xfe300000 0x0 0x40000>;
clock-names = "clk_xin", "clk_ahb";
};
watchdog0: watchdog@fd4d0000 {
compatible = "cdns,wdt-r1p2";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 113 1>;
reg = <0x0 0xfd4d0000 0x0 0x1000>;
timeout-sec = <10>;
};
};
};