blob: 1eab79c9ac484172a63d9cc0c4a409b7fffe7e8b [file] [log] [blame]
/*
* Implement fast SHA-1 with AVX2 instructions. (x86_64)
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2014 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* Contact Information:
* Ilya Albrekht <ilya.albrekht@intel.com>
* Maxim Locktyukhin <maxim.locktyukhin@intel.com>
* Ronen Zohar <ronen.zohar@intel.com>
* Chandramouli Narayanan <mouli@linux.intel.com>
*
* BSD LICENSE
*
* Copyright(c) 2014 Intel Corporation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/*
* SHA-1 implementation with Intel(R) AVX2 instruction set extensions.
*
*This implementation is based on the previous SSSE3 release:
*Visit http://software.intel.com/en-us/articles/
*and refer to improving-the-performance-of-the-secure-hash-algorithm-1/
*
*Updates 20-byte SHA-1 record in 'hash' for even number of
*'num_blocks' consecutive 64-byte blocks
*
*extern "C" void sha1_transform_avx2(
* int *hash, const char* input, size_t num_blocks );
*/
#include <linux/linkage.h>
#define CTX %rdi /* arg1 */
#define BUF %rsi /* arg2 */
#define CNT %rdx /* arg3 */
#define REG_A %ecx
#define REG_B %esi
#define REG_C %edi
#define REG_D %eax
#define REG_E %edx
#define REG_TB %ebx
#define REG_TA %r12d
#define REG_RA %rcx
#define REG_RB %rsi
#define REG_RC %rdi
#define REG_RD %rax
#define REG_RE %rdx
#define REG_RTA %r12
#define REG_RTB %rbx
#define REG_T1 %ebp
#define xmm_mov vmovups
#define avx2_zeroupper vzeroupper
#define RND_F1 1
#define RND_F2 2
#define RND_F3 3
.macro REGALLOC
.set A, REG_A
.set B, REG_B
.set C, REG_C
.set D, REG_D
.set E, REG_E
.set TB, REG_TB
.set TA, REG_TA
.set RA, REG_RA
.set RB, REG_RB
.set RC, REG_RC
.set RD, REG_RD
.set RE, REG_RE
.set RTA, REG_RTA
.set RTB, REG_RTB
.set T1, REG_T1
.endm
#define HASH_PTR %r9
#define BLOCKS_CTR %r8
#define BUFFER_PTR %r10
#define BUFFER_PTR2 %r13
#define PRECALC_BUF %r14
#define WK_BUF %r15
#define W_TMP %xmm0
#define WY_TMP %ymm0
#define WY_TMP2 %ymm9
# AVX2 variables
#define WY0 %ymm3
#define WY4 %ymm5
#define WY08 %ymm7
#define WY12 %ymm8
#define WY16 %ymm12
#define WY20 %ymm13
#define WY24 %ymm14
#define WY28 %ymm15
#define YMM_SHUFB_BSWAP %ymm10
/*
* Keep 2 iterations precalculated at a time:
* - 80 DWORDs per iteration * 2
*/
#define W_SIZE (80*2*2 +16)
#define WK(t) ((((t) % 80) / 4)*32 + ( (t) % 4)*4 + ((t)/80)*16 )(WK_BUF)
#define PRECALC_WK(t) ((t)*2*2)(PRECALC_BUF)
.macro UPDATE_HASH hash, val
add \hash, \val
mov \val, \hash
.endm
.macro PRECALC_RESET_WY
.set WY_00, WY0
.set WY_04, WY4
.set WY_08, WY08
.set WY_12, WY12
.set WY_16, WY16
.set WY_20, WY20
.set WY_24, WY24
.set WY_28, WY28
.set WY_32, WY_00
.endm
.macro PRECALC_ROTATE_WY
/* Rotate macros */
.set WY_32, WY_28
.set WY_28, WY_24
.set WY_24, WY_20
.set WY_20, WY_16
.set WY_16, WY_12
.set WY_12, WY_08
.set WY_08, WY_04
.set WY_04, WY_00
.set WY_00, WY_32
/* Define register aliases */
.set WY, WY_00
.set WY_minus_04, WY_04
.set WY_minus_08, WY_08
.set WY_minus_12, WY_12
.set WY_minus_16, WY_16
.set WY_minus_20, WY_20
.set WY_minus_24, WY_24
.set WY_minus_28, WY_28
.set WY_minus_32, WY
.endm
.macro PRECALC_00_15
.if (i == 0) # Initialize and rotate registers
PRECALC_RESET_WY
PRECALC_ROTATE_WY
.endif
/* message scheduling pre-compute for rounds 0-15 */
.if ((i & 7) == 0)
/*
* blended AVX2 and ALU instruction scheduling
* 1 vector iteration per 8 rounds
*/
vmovdqu (i * 2)(BUFFER_PTR), W_TMP
.elseif ((i & 7) == 1)
vinsertf128 $1, ((i-1) * 2)(BUFFER_PTR2),\
WY_TMP, WY_TMP
.elseif ((i & 7) == 2)
vpshufb YMM_SHUFB_BSWAP, WY_TMP, WY
.elseif ((i & 7) == 4)
vpaddd K_XMM + K_XMM_AR(%rip), WY, WY_TMP
.elseif ((i & 7) == 7)
vmovdqu WY_TMP, PRECALC_WK(i&~7)
PRECALC_ROTATE_WY
.endif
.endm
.macro PRECALC_16_31
/*
* message scheduling pre-compute for rounds 16-31
* calculating last 32 w[i] values in 8 XMM registers
* pre-calculate K+w[i] values and store to mem
* for later load by ALU add instruction
*
* "brute force" vectorization for rounds 16-31 only
* due to w[i]->w[i-3] dependency
*/
.if ((i & 7) == 0)
/*
* blended AVX2 and ALU instruction scheduling
* 1 vector iteration per 8 rounds
*/
/* w[i-14] */
vpalignr $8, WY_minus_16, WY_minus_12, WY
vpsrldq $4, WY_minus_04, WY_TMP /* w[i-3] */
.elseif ((i & 7) == 1)
vpxor WY_minus_08, WY, WY
vpxor WY_minus_16, WY_TMP, WY_TMP
.elseif ((i & 7) == 2)
vpxor WY_TMP, WY, WY
vpslldq $12, WY, WY_TMP2
.elseif ((i & 7) == 3)
vpslld $1, WY, WY_TMP
vpsrld $31, WY, WY
.elseif ((i & 7) == 4)
vpor WY, WY_TMP, WY_TMP
vpslld $2, WY_TMP2, WY
.elseif ((i & 7) == 5)
vpsrld $30, WY_TMP2, WY_TMP2
vpxor WY, WY_TMP, WY_TMP
.elseif ((i & 7) == 7)
vpxor WY_TMP2, WY_TMP, WY
vpaddd K_XMM + K_XMM_AR(%rip), WY, WY_TMP
vmovdqu WY_TMP, PRECALC_WK(i&~7)
PRECALC_ROTATE_WY
.endif
.endm
.macro PRECALC_32_79
/*
* in SHA-1 specification:
* w[i] = (w[i-3] ^ w[i-8] ^ w[i-14] ^ w[i-16]) rol 1
* instead we do equal:
* w[i] = (w[i-6] ^ w[i-16] ^ w[i-28] ^ w[i-32]) rol 2
* allows more efficient vectorization
* since w[i]=>w[i-3] dependency is broken
*/
.if ((i & 7) == 0)
/*
* blended AVX2 and ALU instruction scheduling
* 1 vector iteration per 8 rounds
*/
vpalignr $8, WY_minus_08, WY_minus_04, WY_TMP
.elseif ((i & 7) == 1)
/* W is W_minus_32 before xor */
vpxor WY_minus_28, WY, WY
.elseif ((i & 7) == 2)
vpxor WY_minus_16, WY_TMP, WY_TMP
.elseif ((i & 7) == 3)
vpxor WY_TMP, WY, WY
.elseif ((i & 7) == 4)
vpslld $2, WY, WY_TMP
.elseif ((i & 7) == 5)
vpsrld $30, WY, WY
vpor WY, WY_TMP, WY
.elseif ((i & 7) == 7)
vpaddd K_XMM + K_XMM_AR(%rip), WY, WY_TMP
vmovdqu WY_TMP, PRECALC_WK(i&~7)
PRECALC_ROTATE_WY
.endif
.endm
.macro PRECALC r, s
.set i, \r
.if (i < 40)
.set K_XMM, 32*0
.elseif (i < 80)
.set K_XMM, 32*1
.elseif (i < 120)
.set K_XMM, 32*2
.else
.set K_XMM, 32*3
.endif
.if (i<32)
PRECALC_00_15 \s
.elseif (i<64)
PRECALC_16_31 \s
.elseif (i < 160)
PRECALC_32_79 \s
.endif
.endm
.macro ROTATE_STATE
.set T_REG, E
.set E, D
.set D, C
.set C, B
.set B, TB
.set TB, A
.set A, T_REG
.set T_REG, RE
.set RE, RD
.set RD, RC
.set RC, RB
.set RB, RTB
.set RTB, RA
.set RA, T_REG
.endm
/* Macro relies on saved ROUND_Fx */
.macro RND_FUN f, r
.if (\f == RND_F1)
ROUND_F1 \r
.elseif (\f == RND_F2)
ROUND_F2 \r
.elseif (\f == RND_F3)
ROUND_F3 \r
.endif
.endm
.macro RR r
.set round_id, (\r % 80)
.if (round_id == 0) /* Precalculate F for first round */
.set ROUND_FUNC, RND_F1
mov B, TB
rorx $(32-30), B, B /* b>>>2 */
andn D, TB, T1
and C, TB
xor T1, TB
.endif
RND_FUN ROUND_FUNC, \r
ROTATE_STATE
.if (round_id == 18)
.set ROUND_FUNC, RND_F2
.elseif (round_id == 38)
.set ROUND_FUNC, RND_F3
.elseif (round_id == 58)
.set ROUND_FUNC, RND_F2
.endif
.set round_id, ( (\r+1) % 80)
RND_FUN ROUND_FUNC, (\r+1)
ROTATE_STATE
.endm
.macro ROUND_F1 r
add WK(\r), E
andn C, A, T1 /* ~b&d */
lea (RE,RTB), E /* Add F from the previous round */
rorx $(32-5), A, TA /* T2 = A >>> 5 */
rorx $(32-30),A, TB /* b>>>2 for next round */
PRECALC (\r) /* msg scheduling for next 2 blocks */
/*
* Calculate F for the next round
* (b & c) ^ andn[b, d]
*/
and B, A /* b&c */
xor T1, A /* F1 = (b&c) ^ (~b&d) */
lea (RE,RTA), E /* E += A >>> 5 */
.endm
.macro ROUND_F2 r
add WK(\r), E
lea (RE,RTB), E /* Add F from the previous round */
/* Calculate F for the next round */
rorx $(32-5), A, TA /* T2 = A >>> 5 */
.if ((round_id) < 79)
rorx $(32-30), A, TB /* b>>>2 for next round */
.endif
PRECALC (\r) /* msg scheduling for next 2 blocks */
.if ((round_id) < 79)
xor B, A
.endif
add TA, E /* E += A >>> 5 */
.if ((round_id) < 79)
xor C, A
.endif
.endm
.macro ROUND_F3 r
add WK(\r), E
PRECALC (\r) /* msg scheduling for next 2 blocks */
lea (RE,RTB), E /* Add F from the previous round */
mov B, T1
or A, T1
rorx $(32-5), A, TA /* T2 = A >>> 5 */
rorx $(32-30), A, TB /* b>>>2 for next round */
/* Calculate F for the next round
* (b and c) or (d and (b or c))
*/
and C, T1
and B, A
or T1, A
add TA, E /* E += A >>> 5 */
.endm
/* Add constant only if (%2 > %3) condition met (uses RTA as temp)
* %1 + %2 >= %3 ? %4 : 0
*/
.macro ADD_IF_GE a, b, c, d
mov \a, RTA
add $\d, RTA
cmp $\c, \b
cmovge RTA, \a
.endm
/*
* macro implements 80 rounds of SHA-1, for multiple blocks with s/w pipelining
*/
.macro SHA1_PIPELINED_MAIN_BODY
REGALLOC
mov (HASH_PTR), A
mov 4(HASH_PTR), B
mov 8(HASH_PTR), C
mov 12(HASH_PTR), D
mov 16(HASH_PTR), E
mov %rsp, PRECALC_BUF
lea (2*4*80+32)(%rsp), WK_BUF
# Precalc WK for first 2 blocks
ADD_IF_GE BUFFER_PTR2, BLOCKS_CTR, 2, 64
.set i, 0
.rept 160
PRECALC i
.set i, i + 1
.endr
/* Go to next block if needed */
ADD_IF_GE BUFFER_PTR, BLOCKS_CTR, 3, 128
ADD_IF_GE BUFFER_PTR2, BLOCKS_CTR, 4, 128
xchg WK_BUF, PRECALC_BUF
.align 32
_loop:
/*
* code loops through more than one block
* we use K_BASE value as a signal of a last block,
* it is set below by: cmovae BUFFER_PTR, K_BASE
*/
test BLOCKS_CTR, BLOCKS_CTR
jnz _begin
.align 32
jmp _end
.align 32
_begin:
/*
* Do first block
* rounds: 0,2,4,6,8
*/
.set j, 0
.rept 5
RR j
.set j, j+2
.endr
jmp _loop0
_loop0:
/*
* rounds:
* 10,12,14,16,18
* 20,22,24,26,28
* 30,32,34,36,38
* 40,42,44,46,48
* 50,52,54,56,58
*/
.rept 25
RR j
.set j, j+2
.endr
/* Update Counter */
sub $1, BLOCKS_CTR
/* Move to the next block only if needed*/
ADD_IF_GE BUFFER_PTR, BLOCKS_CTR, 4, 128
/*
* rounds
* 60,62,64,66,68
* 70,72,74,76,78
*/
.rept 10
RR j
.set j, j+2
.endr
UPDATE_HASH (HASH_PTR), A
UPDATE_HASH 4(HASH_PTR), TB
UPDATE_HASH 8(HASH_PTR), C
UPDATE_HASH 12(HASH_PTR), D
UPDATE_HASH 16(HASH_PTR), E
test BLOCKS_CTR, BLOCKS_CTR
jz _loop
mov TB, B
/* Process second block */
/*
* rounds
* 0+80, 2+80, 4+80, 6+80, 8+80
* 10+80,12+80,14+80,16+80,18+80
*/
.set j, 0
.rept 10
RR j+80
.set j, j+2
.endr
jmp _loop1
_loop1:
/*
* rounds
* 20+80,22+80,24+80,26+80,28+80
* 30+80,32+80,34+80,36+80,38+80
*/
.rept 10
RR j+80
.set j, j+2
.endr
jmp _loop2
_loop2:
/*
* rounds
* 40+80,42+80,44+80,46+80,48+80
* 50+80,52+80,54+80,56+80,58+80
*/
.rept 10
RR j+80
.set j, j+2
.endr
/* update counter */
sub $1, BLOCKS_CTR
/* Move to the next block only if needed*/
ADD_IF_GE BUFFER_PTR2, BLOCKS_CTR, 4, 128
jmp _loop3
_loop3:
/*
* rounds
* 60+80,62+80,64+80,66+80,68+80
* 70+80,72+80,74+80,76+80,78+80
*/
.rept 10
RR j+80
.set j, j+2
.endr
UPDATE_HASH (HASH_PTR), A
UPDATE_HASH 4(HASH_PTR), TB
UPDATE_HASH 8(HASH_PTR), C
UPDATE_HASH 12(HASH_PTR), D
UPDATE_HASH 16(HASH_PTR), E
/* Reset state for AVX2 reg permutation */
mov A, TA
mov TB, A
mov C, TB
mov E, C
mov D, B
mov TA, D
REGALLOC
xchg WK_BUF, PRECALC_BUF
jmp _loop
.align 32
_end:
.endm
/*
* macro implements SHA-1 function's body for several 64-byte blocks
* param: function's name
*/
.macro SHA1_VECTOR_ASM name
ENTRY(\name)
push %rbx
push %rbp
push %r12
push %r13
push %r14
push %r15
RESERVE_STACK = (W_SIZE*4 + 8+24)
/* Align stack */
mov %rsp, %rbx
and $~(0x20-1), %rsp
push %rbx
sub $RESERVE_STACK, %rsp
avx2_zeroupper
/* Setup initial values */
mov CTX, HASH_PTR
mov BUF, BUFFER_PTR
mov BUF, BUFFER_PTR2
mov CNT, BLOCKS_CTR
xmm_mov BSWAP_SHUFB_CTL(%rip), YMM_SHUFB_BSWAP
SHA1_PIPELINED_MAIN_BODY
avx2_zeroupper
add $RESERVE_STACK, %rsp
pop %rsp
pop %r15
pop %r14
pop %r13
pop %r12
pop %rbp
pop %rbx
ret
ENDPROC(\name)
.endm
.section .rodata
#define K1 0x5a827999
#define K2 0x6ed9eba1
#define K3 0x8f1bbcdc
#define K4 0xca62c1d6
.align 128
K_XMM_AR:
.long K1, K1, K1, K1
.long K1, K1, K1, K1
.long K2, K2, K2, K2
.long K2, K2, K2, K2
.long K3, K3, K3, K3
.long K3, K3, K3, K3
.long K4, K4, K4, K4
.long K4, K4, K4, K4
BSWAP_SHUFB_CTL:
.long 0x00010203
.long 0x04050607
.long 0x08090a0b
.long 0x0c0d0e0f
.long 0x00010203
.long 0x04050607
.long 0x08090a0b
.long 0x0c0d0e0f
.text
SHA1_VECTOR_ASM sha1_transform_avx2