blob: 7b6c849250984149f871ea9075b995def2291021 [file] [log] [blame]
/*
* Copyright © 2006-2011 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
* Authors:
* Eric Anholt <eric@anholt.net>
*/
#include <linux/i2c.h>
#include <drm/drmP.h>
#include <drm/drm_plane_helper.h>
#include "framebuffer.h"
#include "psb_drv.h"
#include "psb_intel_drv.h"
#include "psb_intel_reg.h"
#include "gma_display.h"
#include "power.h"
#define INTEL_LIMIT_I9XX_SDVO_DAC 0
#define INTEL_LIMIT_I9XX_LVDS 1
static const struct gma_limit_t psb_intel_limits[] = {
{ /* INTEL_LIMIT_I9XX_SDVO_DAC */
.dot = {.min = 20000, .max = 400000},
.vco = {.min = 1400000, .max = 2800000},
.n = {.min = 1, .max = 6},
.m = {.min = 70, .max = 120},
.m1 = {.min = 8, .max = 18},
.m2 = {.min = 3, .max = 7},
.p = {.min = 5, .max = 80},
.p1 = {.min = 1, .max = 8},
.p2 = {.dot_limit = 200000, .p2_slow = 10, .p2_fast = 5},
.find_pll = gma_find_best_pll,
},
{ /* INTEL_LIMIT_I9XX_LVDS */
.dot = {.min = 20000, .max = 400000},
.vco = {.min = 1400000, .max = 2800000},
.n = {.min = 1, .max = 6},
.m = {.min = 70, .max = 120},
.m1 = {.min = 8, .max = 18},
.m2 = {.min = 3, .max = 7},
.p = {.min = 7, .max = 98},
.p1 = {.min = 1, .max = 8},
/* The single-channel range is 25-112Mhz, and dual-channel
* is 80-224Mhz. Prefer single channel as much as possible.
*/
.p2 = {.dot_limit = 112000, .p2_slow = 14, .p2_fast = 7},
.find_pll = gma_find_best_pll,
},
};
static const struct gma_limit_t *psb_intel_limit(struct drm_crtc *crtc,
int refclk)
{
const struct gma_limit_t *limit;
if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
limit = &psb_intel_limits[INTEL_LIMIT_I9XX_LVDS];
else
limit = &psb_intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
return limit;
}
static void psb_intel_clock(int refclk, struct gma_clock_t *clock)
{
clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
clock->p = clock->p1 * clock->p2;
clock->vco = refclk * clock->m / (clock->n + 2);
clock->dot = clock->vco / clock->p;
}
/**
* Return the pipe currently connected to the panel fitter,
* or -1 if the panel fitter is not present or not in use
*/
static int psb_intel_panel_fitter_pipe(struct drm_device *dev)
{
u32 pfit_control;
pfit_control = REG_READ(PFIT_CONTROL);
/* See if the panel fitter is in use */
if ((pfit_control & PFIT_ENABLE) == 0)
return -1;
/* Must be on PIPE 1 for PSB */
return 1;
}
static int psb_intel_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
int pipe = gma_crtc->pipe;
const struct psb_offset *map = &dev_priv->regmap[pipe];
int refclk;
struct gma_clock_t clock;
u32 dpll = 0, fp = 0, dspcntr, pipeconf;
bool ok, is_sdvo = false;
bool is_lvds = false, is_tv = false;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
const struct gma_limit_t *limit;
/* No scan out no play */
if (crtc->primary->fb == NULL) {
crtc_funcs->mode_set_base(crtc, x, y, old_fb);
return 0;
}
list_for_each_entry(connector, &mode_config->connector_list, head) {
struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
if (!connector->encoder
|| connector->encoder->crtc != crtc)
continue;
switch (gma_encoder->type) {
case INTEL_OUTPUT_LVDS:
is_lvds = true;
break;
case INTEL_OUTPUT_SDVO:
is_sdvo = true;
break;
case INTEL_OUTPUT_TVOUT:
is_tv = true;
break;
}
}
refclk = 96000;
limit = gma_crtc->clock_funcs->limit(crtc, refclk);
ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk,
&clock);
if (!ok) {
DRM_ERROR("Couldn't find PLL settings for mode! target: %d, actual: %d",
adjusted_mode->clock, clock.dot);
return 0;
}
fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
dpll = DPLL_VGA_MODE_DIS;
if (is_lvds) {
dpll |= DPLLB_MODE_LVDS;
dpll |= DPLL_DVO_HIGH_SPEED;
} else
dpll |= DPLLB_MODE_DAC_SERIAL;
if (is_sdvo) {
int sdvo_pixel_multiply =
adjusted_mode->clock / mode->clock;
dpll |= DPLL_DVO_HIGH_SPEED;
dpll |=
(sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
}
/* compute bitmask from p1 value */
dpll |= (1 << (clock.p1 - 1)) << 16;
switch (clock.p2) {
case 5:
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
break;
case 7:
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
break;
case 10:
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
break;
case 14:
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
break;
}
if (is_tv) {
/* XXX: just matching BIOS for now */
/* dpll |= PLL_REF_INPUT_TVCLKINBC; */
dpll |= 3;
}
dpll |= PLL_REF_INPUT_DREFCLK;
/* setup pipeconf */
pipeconf = REG_READ(map->conf);
/* Set up the display plane register */
dspcntr = DISPPLANE_GAMMA_ENABLE;
if (pipe == 0)
dspcntr |= DISPPLANE_SEL_PIPE_A;
else
dspcntr |= DISPPLANE_SEL_PIPE_B;
dspcntr |= DISPLAY_PLANE_ENABLE;
pipeconf |= PIPEACONF_ENABLE;
dpll |= DPLL_VCO_ENABLE;
/* Disable the panel fitter if it was on our pipe */
if (psb_intel_panel_fitter_pipe(dev) == pipe)
REG_WRITE(PFIT_CONTROL, 0);
drm_mode_debug_printmodeline(mode);
if (dpll & DPLL_VCO_ENABLE) {
REG_WRITE(map->fp0, fp);
REG_WRITE(map->dpll, dpll & ~DPLL_VCO_ENABLE);
REG_READ(map->dpll);
udelay(150);
}
/* The LVDS pin pair needs to be on before the DPLLs are enabled.
* This is an exception to the general rule that mode_set doesn't turn
* things on.
*/
if (is_lvds) {
u32 lvds = REG_READ(LVDS);
lvds &= ~LVDS_PIPEB_SELECT;
if (pipe == 1)
lvds |= LVDS_PIPEB_SELECT;
lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
/* Set the B0-B3 data pairs corresponding to
* whether we're going to
* set the DPLLs for dual-channel mode or not.
*/
lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
if (clock.p2 == 7)
lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
* appropriately here, but we need to look more
* thoroughly into how panels behave in the two modes.
*/
REG_WRITE(LVDS, lvds);
REG_READ(LVDS);
}
REG_WRITE(map->fp0, fp);
REG_WRITE(map->dpll, dpll);
REG_READ(map->dpll);
/* Wait for the clocks to stabilize. */
udelay(150);
/* write it again -- the BIOS does, after all */
REG_WRITE(map->dpll, dpll);
REG_READ(map->dpll);
/* Wait for the clocks to stabilize. */
udelay(150);
REG_WRITE(map->htotal, (adjusted_mode->crtc_hdisplay - 1) |
((adjusted_mode->crtc_htotal - 1) << 16));
REG_WRITE(map->hblank, (adjusted_mode->crtc_hblank_start - 1) |
((adjusted_mode->crtc_hblank_end - 1) << 16));
REG_WRITE(map->hsync, (adjusted_mode->crtc_hsync_start - 1) |
((adjusted_mode->crtc_hsync_end - 1) << 16));
REG_WRITE(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) |
((adjusted_mode->crtc_vtotal - 1) << 16));
REG_WRITE(map->vblank, (adjusted_mode->crtc_vblank_start - 1) |
((adjusted_mode->crtc_vblank_end - 1) << 16));
REG_WRITE(map->vsync, (adjusted_mode->crtc_vsync_start - 1) |
((adjusted_mode->crtc_vsync_end - 1) << 16));
/* pipesrc and dspsize control the size that is scaled from,
* which should always be the user's requested size.
*/
REG_WRITE(map->size,
((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
REG_WRITE(map->pos, 0);
REG_WRITE(map->src,
((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
REG_WRITE(map->conf, pipeconf);
REG_READ(map->conf);
gma_wait_for_vblank(dev);
REG_WRITE(map->cntr, dspcntr);
/* Flush the plane changes */
crtc_funcs->mode_set_base(crtc, x, y, old_fb);
gma_wait_for_vblank(dev);
return 0;
}
/* Returns the clock of the currently programmed mode of the given pipe. */
static int psb_intel_crtc_clock_get(struct drm_device *dev,
struct drm_crtc *crtc)
{
struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
struct drm_psb_private *dev_priv = dev->dev_private;
int pipe = gma_crtc->pipe;
const struct psb_offset *map = &dev_priv->regmap[pipe];
u32 dpll;
u32 fp;
struct gma_clock_t clock;
bool is_lvds;
struct psb_pipe *p = &dev_priv->regs.pipe[pipe];
if (gma_power_begin(dev, false)) {
dpll = REG_READ(map->dpll);
if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
fp = REG_READ(map->fp0);
else
fp = REG_READ(map->fp1);
is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN);
gma_power_end(dev);
} else {
dpll = p->dpll;
if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
fp = p->fp0;
else
fp = p->fp1;
is_lvds = (pipe == 1) && (dev_priv->regs.psb.saveLVDS &
LVDS_PORT_EN);
}
clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
if (is_lvds) {
clock.p1 =
ffs((dpll &
DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
DPLL_FPA01_P1_POST_DIV_SHIFT);
clock.p2 = 14;
if ((dpll & PLL_REF_INPUT_MASK) ==
PLLB_REF_INPUT_SPREADSPECTRUMIN) {
/* XXX: might not be 66MHz */
psb_intel_clock(66000, &clock);
} else
psb_intel_clock(48000, &clock);
} else {
if (dpll & PLL_P1_DIVIDE_BY_TWO)
clock.p1 = 2;
else {
clock.p1 =
((dpll &
DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
}
if (dpll & PLL_P2_DIVIDE_BY_4)
clock.p2 = 4;
else
clock.p2 = 2;
psb_intel_clock(48000, &clock);
}
/* XXX: It would be nice to validate the clocks, but we can't reuse
* i830PllIsValid() because it relies on the xf86_config connector
* configuration being accurate, which it isn't necessarily.
*/
return clock.dot;
}
/** Returns the currently programmed mode of the given pipe. */
struct drm_display_mode *psb_intel_crtc_mode_get(struct drm_device *dev,
struct drm_crtc *crtc)
{
struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
int pipe = gma_crtc->pipe;
struct drm_display_mode *mode;
int htot;
int hsync;
int vtot;
int vsync;
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_pipe *p = &dev_priv->regs.pipe[pipe];
const struct psb_offset *map = &dev_priv->regmap[pipe];
if (gma_power_begin(dev, false)) {
htot = REG_READ(map->htotal);
hsync = REG_READ(map->hsync);
vtot = REG_READ(map->vtotal);
vsync = REG_READ(map->vsync);
gma_power_end(dev);
} else {
htot = p->htotal;
hsync = p->hsync;
vtot = p->vtotal;
vsync = p->vsync;
}
mode = kzalloc(sizeof(*mode), GFP_KERNEL);
if (!mode)
return NULL;
mode->clock = psb_intel_crtc_clock_get(dev, crtc);
mode->hdisplay = (htot & 0xffff) + 1;
mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
mode->hsync_start = (hsync & 0xffff) + 1;
mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
mode->vdisplay = (vtot & 0xffff) + 1;
mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
mode->vsync_start = (vsync & 0xffff) + 1;
mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
drm_mode_set_name(mode);
drm_mode_set_crtcinfo(mode, 0);
return mode;
}
const struct drm_crtc_helper_funcs psb_intel_helper_funcs = {
.dpms = gma_crtc_dpms,
.mode_set = psb_intel_crtc_mode_set,
.mode_set_base = gma_pipe_set_base,
.prepare = gma_crtc_prepare,
.commit = gma_crtc_commit,
.disable = gma_crtc_disable,
};
const struct drm_crtc_funcs psb_intel_crtc_funcs = {
.cursor_set = gma_crtc_cursor_set,
.cursor_move = gma_crtc_cursor_move,
.gamma_set = gma_crtc_gamma_set,
.set_config = gma_crtc_set_config,
.destroy = gma_crtc_destroy,
};
const struct gma_clock_funcs psb_clock_funcs = {
.clock = psb_intel_clock,
.limit = psb_intel_limit,
.pll_is_valid = gma_pll_is_valid,
};
/*
* Set the default value of cursor control and base register
* to zero. This is a workaround for h/w defect on Oaktrail
*/
static void psb_intel_cursor_init(struct drm_device *dev,
struct gma_crtc *gma_crtc)
{
struct drm_psb_private *dev_priv = dev->dev_private;
u32 control[3] = { CURACNTR, CURBCNTR, CURCCNTR };
u32 base[3] = { CURABASE, CURBBASE, CURCBASE };
struct gtt_range *cursor_gt;
if (dev_priv->ops->cursor_needs_phys) {
/* Allocate 4 pages of stolen mem for a hardware cursor. That
* is enough for the 64 x 64 ARGB cursors we support.
*/
cursor_gt = psb_gtt_alloc_range(dev, 4 * PAGE_SIZE, "cursor", 1,
PAGE_SIZE);
if (!cursor_gt) {
gma_crtc->cursor_gt = NULL;
goto out;
}
gma_crtc->cursor_gt = cursor_gt;
gma_crtc->cursor_addr = dev_priv->stolen_base +
cursor_gt->offset;
} else {
gma_crtc->cursor_gt = NULL;
}
out:
REG_WRITE(control[gma_crtc->pipe], 0);
REG_WRITE(base[gma_crtc->pipe], 0);
}
void psb_intel_crtc_init(struct drm_device *dev, int pipe,
struct psb_intel_mode_device *mode_dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
struct gma_crtc *gma_crtc;
int i;
/* We allocate a extra array of drm_connector pointers
* for fbdev after the crtc */
gma_crtc = kzalloc(sizeof(struct gma_crtc) +
(INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)),
GFP_KERNEL);
if (gma_crtc == NULL)
return;
gma_crtc->crtc_state =
kzalloc(sizeof(struct psb_intel_crtc_state), GFP_KERNEL);
if (!gma_crtc->crtc_state) {
dev_err(dev->dev, "Crtc state error: No memory\n");
kfree(gma_crtc);
return;
}
/* Set the CRTC operations from the chip specific data */
drm_crtc_init(dev, &gma_crtc->base, dev_priv->ops->crtc_funcs);
/* Set the CRTC clock functions from chip specific data */
gma_crtc->clock_funcs = dev_priv->ops->clock_funcs;
drm_mode_crtc_set_gamma_size(&gma_crtc->base, 256);
gma_crtc->pipe = pipe;
gma_crtc->plane = pipe;
for (i = 0; i < 256; i++) {
gma_crtc->lut_r[i] = i;
gma_crtc->lut_g[i] = i;
gma_crtc->lut_b[i] = i;
gma_crtc->lut_adj[i] = 0;
}
gma_crtc->mode_dev = mode_dev;
gma_crtc->cursor_addr = 0;
drm_crtc_helper_add(&gma_crtc->base,
dev_priv->ops->crtc_helper);
/* Setup the array of drm_connector pointer array */
gma_crtc->mode_set.crtc = &gma_crtc->base;
BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
dev_priv->plane_to_crtc_mapping[gma_crtc->plane] != NULL);
dev_priv->plane_to_crtc_mapping[gma_crtc->plane] = &gma_crtc->base;
dev_priv->pipe_to_crtc_mapping[gma_crtc->pipe] = &gma_crtc->base;
gma_crtc->mode_set.connectors = (struct drm_connector **)(gma_crtc + 1);
gma_crtc->mode_set.num_connectors = 0;
psb_intel_cursor_init(dev, gma_crtc);
/* Set to true so that the pipe is forced off on initial config. */
gma_crtc->active = true;
}
struct drm_crtc *psb_intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
{
struct drm_crtc *crtc = NULL;
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
if (gma_crtc->pipe == pipe)
break;
}
return crtc;
}
int gma_connector_clones(struct drm_device *dev, int type_mask)
{
int index_mask = 0;
struct drm_connector *connector;
int entry = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list,
head) {
struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
if (type_mask & (1 << gma_encoder->type))
index_mask |= (1 << entry);
entry++;
}
return index_mask;
}