| if VIDEO_MXC_CAPTURE |
| |
| config VIDEO_V4L2_MXC_INT_DEVICE |
| tristate |
| |
| config VIDEO_MXC_CSI_CAMERA |
| tristate "CSI camera support" |
| depends on VIDEO_MXC_CAPTURE && VIDEO_V4L2 |
| ---help--- |
| This is the video4linux2 capture driver based on CSI module. |
| |
| config MXC_VADC |
| tristate "mxc VADC support" |
| depends on VIDEO_MXC_CAPTURE && VIDEO_V4L2 |
| ---help--- |
| If you plan to use the VADC with your MXC system, say Y here. |
| |
| config MXC_MIPI_CSI |
| tristate "mxc mipi csi driver" |
| depends on VIDEO_MXC_CAPTURE && VIDEO_V4L2 |
| ---help--- |
| This is a V4L2 driver for i.MX7D SoC MIPI-CSI2 receiver devices. |
| |
| menu "MXC Camera/V4L2 PRP Features support" |
| config VIDEO_MXC_IPU_CAMERA |
| bool |
| select VIDEO_V4L2_MXC_INT_DEVICE |
| depends on VIDEO_MXC_CAPTURE && MXC_IPU |
| default y |
| |
| config MXC_CAMERA_OV5640 |
| tristate "OmniVision ov5640 camera support" |
| depends on !VIDEO_MXC_EMMA_CAMERA && I2C |
| depends on VIDEO_V4L2_MXC_INT_DEVICE |
| ---help--- |
| If you plan to use the ov5640 Camera with your MXC system, say Y here. |
| |
| config MXC_CAMERA_OV5640_V2 |
| tristate "OmniVision ov5640 camera support" |
| depends on VIDEO_MXC_CAPTURE && I2C |
| ---help--- |
| If you plan to use the ov5640 Camera with your MXC system, say Y here. |
| |
| config MXC_CAMERA_OV5642 |
| tristate "OmniVision ov5642 camera support" |
| depends on !VIDEO_MXC_EMMA_CAMERA && I2C |
| depends on VIDEO_V4L2_MXC_INT_DEVICE |
| ---help--- |
| If you plan to use the ov5642 Camera with your MXC system, say Y here. |
| |
| config MXC_CAMERA_OV5640_MIPI |
| tristate "OmniVision ov5640 camera support using mipi" |
| depends on !VIDEO_MXC_EMMA_CAMERA && I2C && MXC_MIPI_CSI2 |
| depends on VIDEO_V4L2_MXC_INT_DEVICE |
| ---help--- |
| If you plan to use the ov5640 Camera with mipi interface in your MXC system, say Y here. |
| |
| config MXC_CAMERA_OV5640_MIPI_V2 |
| tristate "OmniVision ov5640 camera support using mipi" |
| depends on MXC_MIPI_CSI && I2C |
| ---help--- |
| If you plan to use the ov5640 Camera with mipi interface in your MXC system, say Y here. |
| |
| config MXC_CAMERA_OV5647_MIPI |
| tristate "OmniVision ov5647 camera support using mipi" |
| depends on MXC_MIPI_CSI && I2C |
| ---help--- |
| If you plan to use the ov5647 Camera with mipi interface in your MXC system, say Y here. |
| |
| config MXC_TVIN_ADV7180 |
| tristate "Analog Device adv7180 TV Decoder Input support" |
| depends on !VIDEO_MXC_EMMA_CAMERA && I2C |
| depends on VIDEO_V4L2_MXC_INT_DEVICE |
| ---help--- |
| If you plan to use the adv7180 video decoder with your MXC system, say Y here. |
| |
| choice |
| prompt "Select Overlay Rounting" |
| default MXC_IPU_DEVICE_QUEUE_SDC |
| depends on VIDEO_MXC_IPU_CAMERA && FB_MXC_SYNC_PANEL |
| |
| config MXC_IPU_DEVICE_QUEUE_SDC |
| tristate "Queue ipu device for overlay library" |
| depends on VIDEO_MXC_IPU_CAMERA |
| ---help--- |
| Use case CSI->MEM->IPU DEVICE->SDC: |
| Images from sensor will be frist recieved in memory,then |
| queue to ipu device for processing if needed, and displaying |
| it on synchronous display with SDC use case. |
| |
| config MXC_IPU_PRP_VF_SDC |
| bool "Pre-Processor VF SDC library" |
| depends on VIDEO_MXC_IPU_CAMERA |
| ---help--- |
| Use case PRP_VF_SDC: |
| Preprocessing image from smart sensor for viewfinder and |
| displaying it on synchronous display with SDC use case. |
| If SDC BG is selected, Rotation will not be supported. |
| CSI -> IC (PRP VF) -> MEM |
| MEM -> IC (ROT) -> MEM |
| MEM -> SDC (FG/BG) |
| |
| endchoice |
| |
| config MXC_IPU_PRP_ENC |
| tristate "Pre-processor Encoder library" |
| depends on VIDEO_MXC_IPU_CAMERA |
| default y |
| ---help--- |
| Use case PRP_ENC: |
| Preprocessing image from smart sensor for encoder. |
| CSI -> IC (PRP ENC) -> MEM |
| |
| config MXC_IPU_CSI_ENC |
| tristate "IPU CSI Encoder library" |
| depends on VIDEO_MXC_IPU_CAMERA |
| default y |
| ---help--- |
| Use case IPU_CSI_ENC: |
| Get raw image with CSI from smart sensor for encoder. |
| CSI -> MEM |
| endmenu |
| |
| endif |
