blob: 9636970d96116107be34ed08201bd099bc0603f6 [file] [log] [blame]
/*
* CXL Flash Device Driver
*
* Written by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>, IBM Corporation
* Matthew R. Ochs <mrochs@linux.vnet.ibm.com>, IBM Corporation
*
* Copyright (C) 2015 IBM Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/delay.h>
#include <linux/file.h>
#include <linux/syscalls.h>
#include <misc/cxl.h>
#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_eh.h>
#include <uapi/scsi/cxlflash_ioctl.h>
#include "sislite.h"
#include "common.h"
#include "vlun.h"
#include "superpipe.h"
struct cxlflash_global global;
/**
* marshal_rele_to_resize() - translate release to resize structure
* @rele: Source structure from which to translate/copy.
* @resize: Destination structure for the translate/copy.
*/
static void marshal_rele_to_resize(struct dk_cxlflash_release *release,
struct dk_cxlflash_resize *resize)
{
resize->hdr = release->hdr;
resize->context_id = release->context_id;
resize->rsrc_handle = release->rsrc_handle;
}
/**
* marshal_det_to_rele() - translate detach to release structure
* @detach: Destination structure for the translate/copy.
* @rele: Source structure from which to translate/copy.
*/
static void marshal_det_to_rele(struct dk_cxlflash_detach *detach,
struct dk_cxlflash_release *release)
{
release->hdr = detach->hdr;
release->context_id = detach->context_id;
}
/**
* cxlflash_free_errpage() - frees resources associated with global error page
*/
void cxlflash_free_errpage(void)
{
mutex_lock(&global.mutex);
if (global.err_page) {
__free_page(global.err_page);
global.err_page = NULL;
}
mutex_unlock(&global.mutex);
}
/**
* cxlflash_stop_term_user_contexts() - stops/terminates known user contexts
* @cfg: Internal structure associated with the host.
*
* When the host needs to go down, all users must be quiesced and their
* memory freed. This is accomplished by putting the contexts in error
* state which will notify the user and let them 'drive' the tear down.
* Meanwhile, this routine camps until all user contexts have been removed.
*/
void cxlflash_stop_term_user_contexts(struct cxlflash_cfg *cfg)
{
struct device *dev = &cfg->dev->dev;
int i, found;
cxlflash_mark_contexts_error(cfg);
while (true) {
found = false;
for (i = 0; i < MAX_CONTEXT; i++)
if (cfg->ctx_tbl[i]) {
found = true;
break;
}
if (!found && list_empty(&cfg->ctx_err_recovery))
return;
dev_dbg(dev, "%s: Wait for user contexts to quiesce...\n",
__func__);
wake_up_all(&cfg->reset_waitq);
ssleep(1);
}
}
/**
* find_error_context() - locates a context by cookie on the error recovery list
* @cfg: Internal structure associated with the host.
* @rctxid: Desired context by id.
* @file: Desired context by file.
*
* Return: Found context on success, NULL on failure
*/
static struct ctx_info *find_error_context(struct cxlflash_cfg *cfg, u64 rctxid,
struct file *file)
{
struct ctx_info *ctxi;
list_for_each_entry(ctxi, &cfg->ctx_err_recovery, list)
if ((ctxi->ctxid == rctxid) || (ctxi->file == file))
return ctxi;
return NULL;
}
/**
* get_context() - obtains a validated and locked context reference
* @cfg: Internal structure associated with the host.
* @rctxid: Desired context (raw, un-decoded format).
* @arg: LUN information or file associated with request.
* @ctx_ctrl: Control information to 'steer' desired lookup.
*
* NOTE: despite the name pid, in linux, current->pid actually refers
* to the lightweight process id (tid) and can change if the process is
* multi threaded. The tgid remains constant for the process and only changes
* when the process of fork. For all intents and purposes, think of tgid
* as a pid in the traditional sense.
*
* Return: Validated context on success, NULL on failure
*/
struct ctx_info *get_context(struct cxlflash_cfg *cfg, u64 rctxid,
void *arg, enum ctx_ctrl ctx_ctrl)
{
struct device *dev = &cfg->dev->dev;
struct ctx_info *ctxi = NULL;
struct lun_access *lun_access = NULL;
struct file *file = NULL;
struct llun_info *lli = arg;
u64 ctxid = DECODE_CTXID(rctxid);
int rc;
pid_t pid = current->tgid, ctxpid = 0;
if (ctx_ctrl & CTX_CTRL_FILE) {
lli = NULL;
file = (struct file *)arg;
}
if (ctx_ctrl & CTX_CTRL_CLONE)
pid = current->parent->tgid;
if (likely(ctxid < MAX_CONTEXT)) {
while (true) {
mutex_lock(&cfg->ctx_tbl_list_mutex);
ctxi = cfg->ctx_tbl[ctxid];
if (ctxi)
if ((file && (ctxi->file != file)) ||
(!file && (ctxi->ctxid != rctxid)))
ctxi = NULL;
if ((ctx_ctrl & CTX_CTRL_ERR) ||
(!ctxi && (ctx_ctrl & CTX_CTRL_ERR_FALLBACK)))
ctxi = find_error_context(cfg, rctxid, file);
if (!ctxi) {
mutex_unlock(&cfg->ctx_tbl_list_mutex);
goto out;
}
/*
* Need to acquire ownership of the context while still
* under the table/list lock to serialize with a remove
* thread. Use the 'try' to avoid stalling the
* table/list lock for a single context.
*
* Note that the lock order is:
*
* cfg->ctx_tbl_list_mutex -> ctxi->mutex
*
* Therefore release ctx_tbl_list_mutex before retrying.
*/
rc = mutex_trylock(&ctxi->mutex);
mutex_unlock(&cfg->ctx_tbl_list_mutex);
if (rc)
break; /* got the context's lock! */
}
if (ctxi->unavail)
goto denied;
ctxpid = ctxi->pid;
if (likely(!(ctx_ctrl & CTX_CTRL_NOPID)))
if (pid != ctxpid)
goto denied;
if (lli) {
list_for_each_entry(lun_access, &ctxi->luns, list)
if (lun_access->lli == lli)
goto out;
goto denied;
}
}
out:
dev_dbg(dev, "%s: rctxid=%016llX ctxinfo=%p ctxpid=%u pid=%u "
"ctx_ctrl=%u\n", __func__, rctxid, ctxi, ctxpid, pid,
ctx_ctrl);
return ctxi;
denied:
mutex_unlock(&ctxi->mutex);
ctxi = NULL;
goto out;
}
/**
* put_context() - release a context that was retrieved from get_context()
* @ctxi: Context to release.
*
* For now, releasing the context equates to unlocking it's mutex.
*/
void put_context(struct ctx_info *ctxi)
{
mutex_unlock(&ctxi->mutex);
}
/**
* afu_attach() - attach a context to the AFU
* @cfg: Internal structure associated with the host.
* @ctxi: Context to attach.
*
* Upon setting the context capabilities, they must be confirmed with
* a read back operation as the context might have been closed since
* the mailbox was unlocked. When this occurs, registration is failed.
*
* Return: 0 on success, -errno on failure
*/
static int afu_attach(struct cxlflash_cfg *cfg, struct ctx_info *ctxi)
{
struct device *dev = &cfg->dev->dev;
struct afu *afu = cfg->afu;
struct sisl_ctrl_map __iomem *ctrl_map = ctxi->ctrl_map;
int rc = 0;
u64 val;
/* Unlock cap and restrict user to read/write cmds in translated mode */
readq_be(&ctrl_map->mbox_r);
val = (SISL_CTX_CAP_READ_CMD | SISL_CTX_CAP_WRITE_CMD);
writeq_be(val, &ctrl_map->ctx_cap);
val = readq_be(&ctrl_map->ctx_cap);
if (val != (SISL_CTX_CAP_READ_CMD | SISL_CTX_CAP_WRITE_CMD)) {
dev_err(dev, "%s: ctx may be closed val=%016llX\n",
__func__, val);
rc = -EAGAIN;
goto out;
}
/* Set up MMIO registers pointing to the RHT */
writeq_be((u64)ctxi->rht_start, &ctrl_map->rht_start);
val = SISL_RHT_CNT_ID((u64)MAX_RHT_PER_CONTEXT, (u64)(afu->ctx_hndl));
writeq_be(val, &ctrl_map->rht_cnt_id);
out:
dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc);
return rc;
}
/**
* read_cap16() - issues a SCSI READ_CAP16 command
* @sdev: SCSI device associated with LUN.
* @lli: LUN destined for capacity request.
*
* The READ_CAP16 can take quite a while to complete. Should an EEH occur while
* in scsi_execute(), the EEH handler will attempt to recover. As part of the
* recovery, the handler drains all currently running ioctls, waiting until they
* have completed before proceeding with a reset. As this routine is used on the
* ioctl path, this can create a condition where the EEH handler becomes stuck,
* infinitely waiting for this ioctl thread. To avoid this behavior, temporarily
* unmark this thread as an ioctl thread by releasing the ioctl read semaphore.
* This will allow the EEH handler to proceed with a recovery while this thread
* is still running. Once the scsi_execute() returns, reacquire the ioctl read
* semaphore and check the adapter state in case it changed while inside of
* scsi_execute(). The state check will wait if the adapter is still being
* recovered or return a failure if the recovery failed. In the event that the
* adapter reset failed, simply return the failure as the ioctl would be unable
* to continue.
*
* Note that the above puts a requirement on this routine to only be called on
* an ioctl thread.
*
* Return: 0 on success, -errno on failure
*/
static int read_cap16(struct scsi_device *sdev, struct llun_info *lli)
{
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct glun_info *gli = lli->parent;
u8 *cmd_buf = NULL;
u8 *scsi_cmd = NULL;
u8 *sense_buf = NULL;
int rc = 0;
int result = 0;
int retry_cnt = 0;
u32 to = CMD_TIMEOUT * HZ;
retry:
cmd_buf = kzalloc(CMD_BUFSIZE, GFP_KERNEL);
scsi_cmd = kzalloc(MAX_COMMAND_SIZE, GFP_KERNEL);
sense_buf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
if (unlikely(!cmd_buf || !scsi_cmd || !sense_buf)) {
rc = -ENOMEM;
goto out;
}
scsi_cmd[0] = SERVICE_ACTION_IN_16; /* read cap(16) */
scsi_cmd[1] = SAI_READ_CAPACITY_16; /* service action */
put_unaligned_be32(CMD_BUFSIZE, &scsi_cmd[10]);
dev_dbg(dev, "%s: %ssending cmd(0x%x)\n", __func__,
retry_cnt ? "re" : "", scsi_cmd[0]);
/* Drop the ioctl read semahpore across lengthy call */
up_read(&cfg->ioctl_rwsem);
result = scsi_execute(sdev, scsi_cmd, DMA_FROM_DEVICE, cmd_buf,
CMD_BUFSIZE, sense_buf, to, CMD_RETRIES, 0, NULL);
down_read(&cfg->ioctl_rwsem);
rc = check_state(cfg);
if (rc) {
dev_err(dev, "%s: Failed state! result=0x08%X\n",
__func__, result);
rc = -ENODEV;
goto out;
}
if (driver_byte(result) == DRIVER_SENSE) {
result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */
if (result & SAM_STAT_CHECK_CONDITION) {
struct scsi_sense_hdr sshdr;
scsi_normalize_sense(sense_buf, SCSI_SENSE_BUFFERSIZE,
&sshdr);
switch (sshdr.sense_key) {
case NO_SENSE:
case RECOVERED_ERROR:
/* fall through */
case NOT_READY:
result &= ~SAM_STAT_CHECK_CONDITION;
break;
case UNIT_ATTENTION:
switch (sshdr.asc) {
case 0x29: /* Power on Reset or Device Reset */
/* fall through */
case 0x2A: /* Device capacity changed */
case 0x3F: /* Report LUNs changed */
/* Retry the command once more */
if (retry_cnt++ < 1) {
kfree(cmd_buf);
kfree(scsi_cmd);
kfree(sense_buf);
goto retry;
}
}
break;
default:
break;
}
}
}
if (result) {
dev_err(dev, "%s: command failed, result=0x%x\n",
__func__, result);
rc = -EIO;
goto out;
}
/*
* Read cap was successful, grab values from the buffer;
* note that we don't need to worry about unaligned access
* as the buffer is allocated on an aligned boundary.
*/
mutex_lock(&gli->mutex);
gli->max_lba = be64_to_cpu(*((__be64 *)&cmd_buf[0]));
gli->blk_len = be32_to_cpu(*((__be32 *)&cmd_buf[8]));
mutex_unlock(&gli->mutex);
out:
kfree(cmd_buf);
kfree(scsi_cmd);
kfree(sense_buf);
dev_dbg(dev, "%s: maxlba=%lld blklen=%d rc=%d\n",
__func__, gli->max_lba, gli->blk_len, rc);
return rc;
}
/**
* get_rhte() - obtains validated resource handle table entry reference
* @ctxi: Context owning the resource handle.
* @rhndl: Resource handle associated with entry.
* @lli: LUN associated with request.
*
* Return: Validated RHTE on success, NULL on failure
*/
struct sisl_rht_entry *get_rhte(struct ctx_info *ctxi, res_hndl_t rhndl,
struct llun_info *lli)
{
struct sisl_rht_entry *rhte = NULL;
if (unlikely(!ctxi->rht_start)) {
pr_debug("%s: Context does not have allocated RHT!\n",
__func__);
goto out;
}
if (unlikely(rhndl >= MAX_RHT_PER_CONTEXT)) {
pr_debug("%s: Bad resource handle! (%d)\n", __func__, rhndl);
goto out;
}
if (unlikely(ctxi->rht_lun[rhndl] != lli)) {
pr_debug("%s: Bad resource handle LUN! (%d)\n",
__func__, rhndl);
goto out;
}
rhte = &ctxi->rht_start[rhndl];
if (unlikely(rhte->nmask == 0)) {
pr_debug("%s: Unopened resource handle! (%d)\n",
__func__, rhndl);
rhte = NULL;
goto out;
}
out:
return rhte;
}
/**
* rhte_checkout() - obtains free/empty resource handle table entry
* @ctxi: Context owning the resource handle.
* @lli: LUN associated with request.
*
* Return: Free RHTE on success, NULL on failure
*/
struct sisl_rht_entry *rhte_checkout(struct ctx_info *ctxi,
struct llun_info *lli)
{
struct sisl_rht_entry *rhte = NULL;
int i;
/* Find a free RHT entry */
for (i = 0; i < MAX_RHT_PER_CONTEXT; i++)
if (ctxi->rht_start[i].nmask == 0) {
rhte = &ctxi->rht_start[i];
ctxi->rht_out++;
break;
}
if (likely(rhte))
ctxi->rht_lun[i] = lli;
pr_debug("%s: returning rhte=%p (%d)\n", __func__, rhte, i);
return rhte;
}
/**
* rhte_checkin() - releases a resource handle table entry
* @ctxi: Context owning the resource handle.
* @rhte: RHTE to release.
*/
void rhte_checkin(struct ctx_info *ctxi,
struct sisl_rht_entry *rhte)
{
u32 rsrc_handle = rhte - ctxi->rht_start;
rhte->nmask = 0;
rhte->fp = 0;
ctxi->rht_out--;
ctxi->rht_lun[rsrc_handle] = NULL;
ctxi->rht_needs_ws[rsrc_handle] = false;
}
/**
* rhte_format1() - populates a RHTE for format 1
* @rhte: RHTE to populate.
* @lun_id: LUN ID of LUN associated with RHTE.
* @perm: Desired permissions for RHTE.
* @port_sel: Port selection mask
*/
static void rht_format1(struct sisl_rht_entry *rhte, u64 lun_id, u32 perm,
u32 port_sel)
{
/*
* Populate the Format 1 RHT entry for direct access (physical
* LUN) using the synchronization sequence defined in the
* SISLite specification.
*/
struct sisl_rht_entry_f1 dummy = { 0 };
struct sisl_rht_entry_f1 *rhte_f1 = (struct sisl_rht_entry_f1 *)rhte;
memset(rhte_f1, 0, sizeof(*rhte_f1));
rhte_f1->fp = SISL_RHT_FP(1U, 0);
dma_wmb(); /* Make setting of format bit visible */
rhte_f1->lun_id = lun_id;
dma_wmb(); /* Make setting of LUN id visible */
/*
* Use a dummy RHT Format 1 entry to build the second dword
* of the entry that must be populated in a single write when
* enabled (valid bit set to TRUE).
*/
dummy.valid = 0x80;
dummy.fp = SISL_RHT_FP(1U, perm);
dummy.port_sel = port_sel;
rhte_f1->dw = dummy.dw;
dma_wmb(); /* Make remaining RHT entry fields visible */
}
/**
* cxlflash_lun_attach() - attaches a user to a LUN and manages the LUN's mode
* @gli: LUN to attach.
* @mode: Desired mode of the LUN.
* @locked: Mutex status on current thread.
*
* Return: 0 on success, -errno on failure
*/
int cxlflash_lun_attach(struct glun_info *gli, enum lun_mode mode, bool locked)
{
int rc = 0;
if (!locked)
mutex_lock(&gli->mutex);
if (gli->mode == MODE_NONE)
gli->mode = mode;
else if (gli->mode != mode) {
pr_debug("%s: LUN operating in mode %d, requested mode %d\n",
__func__, gli->mode, mode);
rc = -EINVAL;
goto out;
}
gli->users++;
WARN_ON(gli->users <= 0);
out:
pr_debug("%s: Returning rc=%d gli->mode=%u gli->users=%u\n",
__func__, rc, gli->mode, gli->users);
if (!locked)
mutex_unlock(&gli->mutex);
return rc;
}
/**
* cxlflash_lun_detach() - detaches a user from a LUN and resets the LUN's mode
* @gli: LUN to detach.
*
* When resetting the mode, terminate block allocation resources as they
* are no longer required (service is safe to call even when block allocation
* resources were not present - such as when transitioning from physical mode).
* These resources will be reallocated when needed (subsequent transition to
* virtual mode).
*/
void cxlflash_lun_detach(struct glun_info *gli)
{
mutex_lock(&gli->mutex);
WARN_ON(gli->mode == MODE_NONE);
if (--gli->users == 0) {
gli->mode = MODE_NONE;
cxlflash_ba_terminate(&gli->blka.ba_lun);
}
pr_debug("%s: gli->users=%u\n", __func__, gli->users);
WARN_ON(gli->users < 0);
mutex_unlock(&gli->mutex);
}
/**
* _cxlflash_disk_release() - releases the specified resource entry
* @sdev: SCSI device associated with LUN.
* @ctxi: Context owning resources.
* @release: Release ioctl data structure.
*
* For LUNs in virtual mode, the virtual LUN associated with the specified
* resource handle is resized to 0 prior to releasing the RHTE. Note that the
* AFU sync should _not_ be performed when the context is sitting on the error
* recovery list. A context on the error recovery list is not known to the AFU
* due to reset. When the context is recovered, it will be reattached and made
* known again to the AFU.
*
* Return: 0 on success, -errno on failure
*/
int _cxlflash_disk_release(struct scsi_device *sdev,
struct ctx_info *ctxi,
struct dk_cxlflash_release *release)
{
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct llun_info *lli = sdev->hostdata;
struct glun_info *gli = lli->parent;
struct afu *afu = cfg->afu;
bool put_ctx = false;
struct dk_cxlflash_resize size;
res_hndl_t rhndl = release->rsrc_handle;
int rc = 0;
u64 ctxid = DECODE_CTXID(release->context_id),
rctxid = release->context_id;
struct sisl_rht_entry *rhte;
struct sisl_rht_entry_f1 *rhte_f1;
dev_dbg(dev, "%s: ctxid=%llu rhndl=0x%llx gli->mode=%u gli->users=%u\n",
__func__, ctxid, release->rsrc_handle, gli->mode, gli->users);
if (!ctxi) {
ctxi = get_context(cfg, rctxid, lli, CTX_CTRL_ERR_FALLBACK);
if (unlikely(!ctxi)) {
dev_dbg(dev, "%s: Bad context! (%llu)\n",
__func__, ctxid);
rc = -EINVAL;
goto out;
}
put_ctx = true;
}
rhte = get_rhte(ctxi, rhndl, lli);
if (unlikely(!rhte)) {
dev_dbg(dev, "%s: Bad resource handle! (%d)\n",
__func__, rhndl);
rc = -EINVAL;
goto out;
}
/*
* Resize to 0 for virtual LUNS by setting the size
* to 0. This will clear LXT_START and LXT_CNT fields
* in the RHT entry and properly sync with the AFU.
*
* Afterwards we clear the remaining fields.
*/
switch (gli->mode) {
case MODE_VIRTUAL:
marshal_rele_to_resize(release, &size);
size.req_size = 0;
rc = _cxlflash_vlun_resize(sdev, ctxi, &size);
if (rc) {
dev_dbg(dev, "%s: resize failed rc %d\n", __func__, rc);
goto out;
}
break;
case MODE_PHYSICAL:
/*
* Clear the Format 1 RHT entry for direct access
* (physical LUN) using the synchronization sequence
* defined in the SISLite specification.
*/
rhte_f1 = (struct sisl_rht_entry_f1 *)rhte;
rhte_f1->valid = 0;
dma_wmb(); /* Make revocation of RHT entry visible */
rhte_f1->lun_id = 0;
dma_wmb(); /* Make clearing of LUN id visible */
rhte_f1->dw = 0;
dma_wmb(); /* Make RHT entry bottom-half clearing visible */
if (!ctxi->err_recovery_active)
cxlflash_afu_sync(afu, ctxid, rhndl, AFU_HW_SYNC);
break;
default:
WARN(1, "Unsupported LUN mode!");
goto out;
}
rhte_checkin(ctxi, rhte);
cxlflash_lun_detach(gli);
out:
if (put_ctx)
put_context(ctxi);
dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc);
return rc;
}
int cxlflash_disk_release(struct scsi_device *sdev,
struct dk_cxlflash_release *release)
{
return _cxlflash_disk_release(sdev, NULL, release);
}
/**
* destroy_context() - releases a context
* @cfg: Internal structure associated with the host.
* @ctxi: Context to release.
*
* This routine is safe to be called with a a non-initialized context.
* Also note that the routine conditionally checks for the existence
* of the context control map before clearing the RHT registers and
* context capabilities because it is possible to destroy a context
* while the context is in the error state (previous mapping was
* removed [so there is no need to worry about clearing] and context
* is waiting for a new mapping).
*/
static void destroy_context(struct cxlflash_cfg *cfg,
struct ctx_info *ctxi)
{
struct afu *afu = cfg->afu;
if (ctxi->initialized) {
WARN_ON(!list_empty(&ctxi->luns));
/* Clear RHT registers and drop all capabilities for context */
if (afu->afu_map && ctxi->ctrl_map) {
writeq_be(0, &ctxi->ctrl_map->rht_start);
writeq_be(0, &ctxi->ctrl_map->rht_cnt_id);
writeq_be(0, &ctxi->ctrl_map->ctx_cap);
}
}
/* Free memory associated with context */
free_page((ulong)ctxi->rht_start);
kfree(ctxi->rht_needs_ws);
kfree(ctxi->rht_lun);
kfree(ctxi);
}
/**
* create_context() - allocates and initializes a context
* @cfg: Internal structure associated with the host.
*
* Return: Allocated context on success, NULL on failure
*/
static struct ctx_info *create_context(struct cxlflash_cfg *cfg)
{
struct device *dev = &cfg->dev->dev;
struct ctx_info *ctxi = NULL;
struct llun_info **lli = NULL;
u8 *ws = NULL;
struct sisl_rht_entry *rhte;
ctxi = kzalloc(sizeof(*ctxi), GFP_KERNEL);
lli = kzalloc((MAX_RHT_PER_CONTEXT * sizeof(*lli)), GFP_KERNEL);
ws = kzalloc((MAX_RHT_PER_CONTEXT * sizeof(*ws)), GFP_KERNEL);
if (unlikely(!ctxi || !lli || !ws)) {
dev_err(dev, "%s: Unable to allocate context!\n", __func__);
goto err;
}
rhte = (struct sisl_rht_entry *)get_zeroed_page(GFP_KERNEL);
if (unlikely(!rhte)) {
dev_err(dev, "%s: Unable to allocate RHT!\n", __func__);
goto err;
}
ctxi->rht_lun = lli;
ctxi->rht_needs_ws = ws;
ctxi->rht_start = rhte;
out:
return ctxi;
err:
kfree(ws);
kfree(lli);
kfree(ctxi);
ctxi = NULL;
goto out;
}
/**
* init_context() - initializes a previously allocated context
* @ctxi: Previously allocated context
* @cfg: Internal structure associated with the host.
* @ctx: Previously obtained CXL context reference.
* @ctxid: Previously obtained process element associated with CXL context.
* @file: Previously obtained file associated with CXL context.
* @perms: User-specified permissions.
*/
static void init_context(struct ctx_info *ctxi, struct cxlflash_cfg *cfg,
struct cxl_context *ctx, int ctxid, struct file *file,
u32 perms)
{
struct afu *afu = cfg->afu;
ctxi->rht_perms = perms;
ctxi->ctrl_map = &afu->afu_map->ctrls[ctxid].ctrl;
ctxi->ctxid = ENCODE_CTXID(ctxi, ctxid);
ctxi->pid = current->tgid; /* tgid = pid */
ctxi->ctx = ctx;
ctxi->cfg = cfg;
ctxi->file = file;
ctxi->initialized = true;
mutex_init(&ctxi->mutex);
kref_init(&ctxi->kref);
INIT_LIST_HEAD(&ctxi->luns);
INIT_LIST_HEAD(&ctxi->list); /* initialize for list_empty() */
}
/**
* remove_context() - context kref release handler
* @kref: Kernel reference associated with context to be removed.
*
* When a context no longer has any references it can safely be removed
* from global access and destroyed. Note that it is assumed the thread
* relinquishing access to the context holds its mutex.
*/
static void remove_context(struct kref *kref)
{
struct ctx_info *ctxi = container_of(kref, struct ctx_info, kref);
struct cxlflash_cfg *cfg = ctxi->cfg;
u64 ctxid = DECODE_CTXID(ctxi->ctxid);
/* Remove context from table/error list */
WARN_ON(!mutex_is_locked(&ctxi->mutex));
ctxi->unavail = true;
mutex_unlock(&ctxi->mutex);
mutex_lock(&cfg->ctx_tbl_list_mutex);
mutex_lock(&ctxi->mutex);
if (!list_empty(&ctxi->list))
list_del(&ctxi->list);
cfg->ctx_tbl[ctxid] = NULL;
mutex_unlock(&cfg->ctx_tbl_list_mutex);
mutex_unlock(&ctxi->mutex);
/* Context now completely uncoupled/unreachable */
destroy_context(cfg, ctxi);
}
/**
* _cxlflash_disk_detach() - detaches a LUN from a context
* @sdev: SCSI device associated with LUN.
* @ctxi: Context owning resources.
* @detach: Detach ioctl data structure.
*
* As part of the detach, all per-context resources associated with the LUN
* are cleaned up. When detaching the last LUN for a context, the context
* itself is cleaned up and released.
*
* Return: 0 on success, -errno on failure
*/
static int _cxlflash_disk_detach(struct scsi_device *sdev,
struct ctx_info *ctxi,
struct dk_cxlflash_detach *detach)
{
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct llun_info *lli = sdev->hostdata;
struct lun_access *lun_access, *t;
struct dk_cxlflash_release rel;
bool put_ctx = false;
int i;
int rc = 0;
u64 ctxid = DECODE_CTXID(detach->context_id),
rctxid = detach->context_id;
dev_dbg(dev, "%s: ctxid=%llu\n", __func__, ctxid);
if (!ctxi) {
ctxi = get_context(cfg, rctxid, lli, CTX_CTRL_ERR_FALLBACK);
if (unlikely(!ctxi)) {
dev_dbg(dev, "%s: Bad context! (%llu)\n",
__func__, ctxid);
rc = -EINVAL;
goto out;
}
put_ctx = true;
}
/* Cleanup outstanding resources tied to this LUN */
if (ctxi->rht_out) {
marshal_det_to_rele(detach, &rel);
for (i = 0; i < MAX_RHT_PER_CONTEXT; i++) {
if (ctxi->rht_lun[i] == lli) {
rel.rsrc_handle = i;
_cxlflash_disk_release(sdev, ctxi, &rel);
}
/* No need to loop further if we're done */
if (ctxi->rht_out == 0)
break;
}
}
/* Take our LUN out of context, free the node */
list_for_each_entry_safe(lun_access, t, &ctxi->luns, list)
if (lun_access->lli == lli) {
list_del(&lun_access->list);
kfree(lun_access);
lun_access = NULL;
break;
}
/*
* Release the context reference and the sdev reference that
* bound this LUN to the context.
*/
if (kref_put(&ctxi->kref, remove_context))
put_ctx = false;
scsi_device_put(sdev);
out:
if (put_ctx)
put_context(ctxi);
dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc);
return rc;
}
static int cxlflash_disk_detach(struct scsi_device *sdev,
struct dk_cxlflash_detach *detach)
{
return _cxlflash_disk_detach(sdev, NULL, detach);
}
/**
* cxlflash_cxl_release() - release handler for adapter file descriptor
* @inode: File-system inode associated with fd.
* @file: File installed with adapter file descriptor.
*
* This routine is the release handler for the fops registered with
* the CXL services on an initial attach for a context. It is called
* when a close (explicity by the user or as part of a process tear
* down) is performed on the adapter file descriptor returned to the
* user. The user should be aware that explicitly performing a close
* considered catastrophic and subsequent usage of the superpipe API
* with previously saved off tokens will fail.
*
* This routine derives the context reference and calls detach for
* each LUN associated with the context.The final detach operation
* causes the context itself to be freed. With exception to when the
* CXL process element (context id) lookup fails (a case that should
* theoretically never occur), every call into this routine results
* in a complete freeing of a context.
*
* Return: 0 on success
*/
static int cxlflash_cxl_release(struct inode *inode, struct file *file)
{
struct cxl_context *ctx = cxl_fops_get_context(file);
struct cxlflash_cfg *cfg = container_of(file->f_op, struct cxlflash_cfg,
cxl_fops);
struct device *dev = &cfg->dev->dev;
struct ctx_info *ctxi = NULL;
struct dk_cxlflash_detach detach = { { 0 }, 0 };
struct lun_access *lun_access, *t;
enum ctx_ctrl ctrl = CTX_CTRL_ERR_FALLBACK | CTX_CTRL_FILE;
int ctxid;
ctxid = cxl_process_element(ctx);
if (unlikely(ctxid < 0)) {
dev_err(dev, "%s: Context %p was closed! (%d)\n",
__func__, ctx, ctxid);
goto out;
}
ctxi = get_context(cfg, ctxid, file, ctrl);
if (unlikely(!ctxi)) {
ctxi = get_context(cfg, ctxid, file, ctrl | CTX_CTRL_CLONE);
if (!ctxi) {
dev_dbg(dev, "%s: Context %d already free!\n",
__func__, ctxid);
goto out_release;
}
dev_dbg(dev, "%s: Another process owns context %d!\n",
__func__, ctxid);
put_context(ctxi);
goto out;
}
dev_dbg(dev, "%s: close for context %d\n", __func__, ctxid);
detach.context_id = ctxi->ctxid;
list_for_each_entry_safe(lun_access, t, &ctxi->luns, list)
_cxlflash_disk_detach(lun_access->sdev, ctxi, &detach);
out_release:
cxl_fd_release(inode, file);
out:
dev_dbg(dev, "%s: returning\n", __func__);
return 0;
}
/**
* unmap_context() - clears a previously established mapping
* @ctxi: Context owning the mapping.
*
* This routine is used to switch between the error notification page
* (dummy page of all 1's) and the real mapping (established by the CXL
* fault handler).
*/
static void unmap_context(struct ctx_info *ctxi)
{
unmap_mapping_range(ctxi->file->f_mapping, 0, 0, 1);
}
/**
* get_err_page() - obtains and allocates the error notification page
*
* Return: error notification page on success, NULL on failure
*/
static struct page *get_err_page(void)
{
struct page *err_page = global.err_page;
if (unlikely(!err_page)) {
err_page = alloc_page(GFP_KERNEL);
if (unlikely(!err_page)) {
pr_err("%s: Unable to allocate err_page!\n", __func__);
goto out;
}
memset(page_address(err_page), -1, PAGE_SIZE);
/* Serialize update w/ other threads to avoid a leak */
mutex_lock(&global.mutex);
if (likely(!global.err_page))
global.err_page = err_page;
else {
__free_page(err_page);
err_page = global.err_page;
}
mutex_unlock(&global.mutex);
}
out:
pr_debug("%s: returning err_page=%p\n", __func__, err_page);
return err_page;
}
/**
* cxlflash_mmap_fault() - mmap fault handler for adapter file descriptor
* @vma: VM area associated with mapping.
* @vmf: VM fault associated with current fault.
*
* To support error notification via MMIO, faults are 'caught' by this routine
* that was inserted before passing back the adapter file descriptor on attach.
* When a fault occurs, this routine evaluates if error recovery is active and
* if so, installs the error page to 'notify' the user about the error state.
* During normal operation, the fault is simply handled by the original fault
* handler that was installed by CXL services as part of initializing the
* adapter file descriptor. The VMA's page protection bits are toggled to
* indicate cached/not-cached depending on the memory backing the fault.
*
* Return: 0 on success, VM_FAULT_SIGBUS on failure
*/
static int cxlflash_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
{
struct file *file = vma->vm_file;
struct cxl_context *ctx = cxl_fops_get_context(file);
struct cxlflash_cfg *cfg = container_of(file->f_op, struct cxlflash_cfg,
cxl_fops);
struct device *dev = &cfg->dev->dev;
struct ctx_info *ctxi = NULL;
struct page *err_page = NULL;
enum ctx_ctrl ctrl = CTX_CTRL_ERR_FALLBACK | CTX_CTRL_FILE;
int rc = 0;
int ctxid;
ctxid = cxl_process_element(ctx);
if (unlikely(ctxid < 0)) {
dev_err(dev, "%s: Context %p was closed! (%d)\n",
__func__, ctx, ctxid);
goto err;
}
ctxi = get_context(cfg, ctxid, file, ctrl);
if (unlikely(!ctxi)) {
dev_dbg(dev, "%s: Bad context! (%d)\n", __func__, ctxid);
goto err;
}
dev_dbg(dev, "%s: fault for context %d\n", __func__, ctxid);
if (likely(!ctxi->err_recovery_active)) {
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
rc = ctxi->cxl_mmap_vmops->fault(vma, vmf);
} else {
dev_dbg(dev, "%s: err recovery active, use err_page!\n",
__func__);
err_page = get_err_page();
if (unlikely(!err_page)) {
dev_err(dev, "%s: Could not obtain error page!\n",
__func__);
rc = VM_FAULT_RETRY;
goto out;
}
get_page(err_page);
vmf->page = err_page;
vma->vm_page_prot = pgprot_cached(vma->vm_page_prot);
}
out:
if (likely(ctxi))
put_context(ctxi);
dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc);
return rc;
err:
rc = VM_FAULT_SIGBUS;
goto out;
}
/*
* Local MMAP vmops to 'catch' faults
*/
static const struct vm_operations_struct cxlflash_mmap_vmops = {
.fault = cxlflash_mmap_fault,
};
/**
* cxlflash_cxl_mmap() - mmap handler for adapter file descriptor
* @file: File installed with adapter file descriptor.
* @vma: VM area associated with mapping.
*
* Installs local mmap vmops to 'catch' faults for error notification support.
*
* Return: 0 on success, -errno on failure
*/
static int cxlflash_cxl_mmap(struct file *file, struct vm_area_struct *vma)
{
struct cxl_context *ctx = cxl_fops_get_context(file);
struct cxlflash_cfg *cfg = container_of(file->f_op, struct cxlflash_cfg,
cxl_fops);
struct device *dev = &cfg->dev->dev;
struct ctx_info *ctxi = NULL;
enum ctx_ctrl ctrl = CTX_CTRL_ERR_FALLBACK | CTX_CTRL_FILE;
int ctxid;
int rc = 0;
ctxid = cxl_process_element(ctx);
if (unlikely(ctxid < 0)) {
dev_err(dev, "%s: Context %p was closed! (%d)\n",
__func__, ctx, ctxid);
rc = -EIO;
goto out;
}
ctxi = get_context(cfg, ctxid, file, ctrl);
if (unlikely(!ctxi)) {
dev_dbg(dev, "%s: Bad context! (%d)\n", __func__, ctxid);
rc = -EIO;
goto out;
}
dev_dbg(dev, "%s: mmap for context %d\n", __func__, ctxid);
rc = cxl_fd_mmap(file, vma);
if (likely(!rc)) {
/* Insert ourself in the mmap fault handler path */
ctxi->cxl_mmap_vmops = vma->vm_ops;
vma->vm_ops = &cxlflash_mmap_vmops;
}
out:
if (likely(ctxi))
put_context(ctxi);
return rc;
}
const struct file_operations cxlflash_cxl_fops = {
.owner = THIS_MODULE,
.mmap = cxlflash_cxl_mmap,
.release = cxlflash_cxl_release,
};
/**
* cxlflash_mark_contexts_error() - move contexts to error state and list
* @cfg: Internal structure associated with the host.
*
* A context is only moved over to the error list when there are no outstanding
* references to it. This ensures that a running operation has completed.
*
* Return: 0 on success, -errno on failure
*/
int cxlflash_mark_contexts_error(struct cxlflash_cfg *cfg)
{
int i, rc = 0;
struct ctx_info *ctxi = NULL;
mutex_lock(&cfg->ctx_tbl_list_mutex);
for (i = 0; i < MAX_CONTEXT; i++) {
ctxi = cfg->ctx_tbl[i];
if (ctxi) {
mutex_lock(&ctxi->mutex);
cfg->ctx_tbl[i] = NULL;
list_add(&ctxi->list, &cfg->ctx_err_recovery);
ctxi->err_recovery_active = true;
ctxi->ctrl_map = NULL;
unmap_context(ctxi);
mutex_unlock(&ctxi->mutex);
}
}
mutex_unlock(&cfg->ctx_tbl_list_mutex);
return rc;
}
/*
* Dummy NULL fops
*/
static const struct file_operations null_fops = {
.owner = THIS_MODULE,
};
/**
* check_state() - checks and responds to the current adapter state
* @cfg: Internal structure associated with the host.
*
* This routine can block and should only be used on process context.
* It assumes that the caller is an ioctl thread and holding the ioctl
* read semaphore. This is temporarily let up across the wait to allow
* for draining actively running ioctls. Also note that when waking up
* from waiting in reset, the state is unknown and must be checked again
* before proceeding.
*
* Return: 0 on success, -errno on failure
*/
int check_state(struct cxlflash_cfg *cfg)
{
struct device *dev = &cfg->dev->dev;
int rc = 0;
retry:
switch (cfg->state) {
case STATE_RESET:
dev_dbg(dev, "%s: Reset state, going to wait...\n", __func__);
up_read(&cfg->ioctl_rwsem);
rc = wait_event_interruptible(cfg->reset_waitq,
cfg->state != STATE_RESET);
down_read(&cfg->ioctl_rwsem);
if (unlikely(rc))
break;
goto retry;
case STATE_FAILTERM:
dev_dbg(dev, "%s: Failed/Terminating!\n", __func__);
rc = -ENODEV;
break;
default:
break;
}
return rc;
}
/**
* cxlflash_disk_attach() - attach a LUN to a context
* @sdev: SCSI device associated with LUN.
* @attach: Attach ioctl data structure.
*
* Creates a context and attaches LUN to it. A LUN can only be attached
* one time to a context (subsequent attaches for the same context/LUN pair
* are not supported). Additional LUNs can be attached to a context by
* specifying the 'reuse' flag defined in the cxlflash_ioctl.h header.
*
* Return: 0 on success, -errno on failure
*/
static int cxlflash_disk_attach(struct scsi_device *sdev,
struct dk_cxlflash_attach *attach)
{
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct afu *afu = cfg->afu;
struct llun_info *lli = sdev->hostdata;
struct glun_info *gli = lli->parent;
struct cxl_ioctl_start_work *work;
struct ctx_info *ctxi = NULL;
struct lun_access *lun_access = NULL;
int rc = 0;
u32 perms;
int ctxid = -1;
u64 rctxid = 0UL;
struct file *file = NULL;
struct cxl_context *ctx = NULL;
int fd = -1;
if (attach->num_interrupts > 4) {
dev_dbg(dev, "%s: Cannot support this many interrupts %llu\n",
__func__, attach->num_interrupts);
rc = -EINVAL;
goto out;
}
if (gli->max_lba == 0) {
dev_dbg(dev, "%s: No capacity info for this LUN (%016llX)\n",
__func__, lli->lun_id[sdev->channel]);
rc = read_cap16(sdev, lli);
if (rc) {
dev_err(dev, "%s: Invalid device! (%d)\n",
__func__, rc);
rc = -ENODEV;
goto out;
}
dev_dbg(dev, "%s: LBA = %016llX\n", __func__, gli->max_lba);
dev_dbg(dev, "%s: BLK_LEN = %08X\n", __func__, gli->blk_len);
}
if (attach->hdr.flags & DK_CXLFLASH_ATTACH_REUSE_CONTEXT) {
rctxid = attach->context_id;
ctxi = get_context(cfg, rctxid, NULL, 0);
if (!ctxi) {
dev_dbg(dev, "%s: Bad context! (%016llX)\n",
__func__, rctxid);
rc = -EINVAL;
goto out;
}
list_for_each_entry(lun_access, &ctxi->luns, list)
if (lun_access->lli == lli) {
dev_dbg(dev, "%s: Already attached!\n",
__func__);
rc = -EINVAL;
goto out;
}
}
rc = scsi_device_get(sdev);
if (unlikely(rc)) {
dev_err(dev, "%s: Unable to get sdev reference!\n", __func__);
goto out;
}
lun_access = kzalloc(sizeof(*lun_access), GFP_KERNEL);
if (unlikely(!lun_access)) {
dev_err(dev, "%s: Unable to allocate lun_access!\n", __func__);
rc = -ENOMEM;
goto err;
}
lun_access->lli = lli;
lun_access->sdev = sdev;
/* Non-NULL context indicates reuse (another context reference) */
if (ctxi) {
dev_dbg(dev, "%s: Reusing context for LUN! (%016llX)\n",
__func__, rctxid);
kref_get(&ctxi->kref);
list_add(&lun_access->list, &ctxi->luns);
goto out_attach;
}
ctxi = create_context(cfg);
if (unlikely(!ctxi)) {
dev_err(dev, "%s: Failed to create context! (%d)\n",
__func__, ctxid);
goto err;
}
ctx = cxl_dev_context_init(cfg->dev);
if (IS_ERR_OR_NULL(ctx)) {
dev_err(dev, "%s: Could not initialize context %p\n",
__func__, ctx);
rc = -ENODEV;
goto err;
}
work = &ctxi->work;
work->num_interrupts = attach->num_interrupts;
work->flags = CXL_START_WORK_NUM_IRQS;
rc = cxl_start_work(ctx, work);
if (unlikely(rc)) {
dev_dbg(dev, "%s: Could not start context rc=%d\n",
__func__, rc);
goto err;
}
ctxid = cxl_process_element(ctx);
if (unlikely((ctxid >= MAX_CONTEXT) || (ctxid < 0))) {
dev_err(dev, "%s: ctxid (%d) invalid!\n", __func__, ctxid);
rc = -EPERM;
goto err;
}
file = cxl_get_fd(ctx, &cfg->cxl_fops, &fd);
if (unlikely(fd < 0)) {
rc = -ENODEV;
dev_err(dev, "%s: Could not get file descriptor\n", __func__);
goto err;
}
/* Translate read/write O_* flags from fcntl.h to AFU permission bits */
perms = SISL_RHT_PERM(attach->hdr.flags + 1);
/* Context mutex is locked upon return */
init_context(ctxi, cfg, ctx, ctxid, file, perms);
rc = afu_attach(cfg, ctxi);
if (unlikely(rc)) {
dev_err(dev, "%s: Could not attach AFU rc %d\n", __func__, rc);
goto err;
}
/*
* No error paths after this point. Once the fd is installed it's
* visible to user space and can't be undone safely on this thread.
* There is no need to worry about a deadlock here because no one
* knows about us yet; we can be the only one holding our mutex.
*/
list_add(&lun_access->list, &ctxi->luns);
mutex_lock(&cfg->ctx_tbl_list_mutex);
mutex_lock(&ctxi->mutex);
cfg->ctx_tbl[ctxid] = ctxi;
mutex_unlock(&cfg->ctx_tbl_list_mutex);
fd_install(fd, file);
out_attach:
if (fd != -1)
attach->hdr.return_flags = DK_CXLFLASH_APP_CLOSE_ADAP_FD;
else
attach->hdr.return_flags = 0;
attach->context_id = ctxi->ctxid;
attach->block_size = gli->blk_len;
attach->mmio_size = sizeof(afu->afu_map->hosts[0].harea);
attach->last_lba = gli->max_lba;
attach->max_xfer = sdev->host->max_sectors * MAX_SECTOR_UNIT;
attach->max_xfer /= gli->blk_len;
out:
attach->adap_fd = fd;
if (ctxi)
put_context(ctxi);
dev_dbg(dev, "%s: returning ctxid=%d fd=%d bs=%lld rc=%d llba=%lld\n",
__func__, ctxid, fd, attach->block_size, rc, attach->last_lba);
return rc;
err:
/* Cleanup CXL context; okay to 'stop' even if it was not started */
if (!IS_ERR_OR_NULL(ctx)) {
cxl_stop_context(ctx);
cxl_release_context(ctx);
ctx = NULL;
}
/*
* Here, we're overriding the fops with a dummy all-NULL fops because
* fput() calls the release fop, which will cause us to mistakenly
* call into the CXL code. Rather than try to add yet more complexity
* to that routine (cxlflash_cxl_release) we should try to fix the
* issue here.
*/
if (fd > 0) {
file->f_op = &null_fops;
fput(file);
put_unused_fd(fd);
fd = -1;
file = NULL;
}
/* Cleanup our context */
if (ctxi) {
destroy_context(cfg, ctxi);
ctxi = NULL;
}
kfree(lun_access);
scsi_device_put(sdev);
goto out;
}
/**
* recover_context() - recovers a context in error
* @cfg: Internal structure associated with the host.
* @ctxi: Context to release.
* @adap_fd: Adapter file descriptor associated with new/recovered context.
*
* Restablishes the state for a context-in-error.
*
* Return: 0 on success, -errno on failure
*/
static int recover_context(struct cxlflash_cfg *cfg,
struct ctx_info *ctxi,
int *adap_fd)
{
struct device *dev = &cfg->dev->dev;
int rc = 0;
int fd = -1;
int ctxid = -1;
struct file *file;
struct cxl_context *ctx;
struct afu *afu = cfg->afu;
ctx = cxl_dev_context_init(cfg->dev);
if (IS_ERR_OR_NULL(ctx)) {
dev_err(dev, "%s: Could not initialize context %p\n",
__func__, ctx);
rc = -ENODEV;
goto out;
}
rc = cxl_start_work(ctx, &ctxi->work);
if (unlikely(rc)) {
dev_dbg(dev, "%s: Could not start context rc=%d\n",
__func__, rc);
goto err1;
}
ctxid = cxl_process_element(ctx);
if (unlikely((ctxid >= MAX_CONTEXT) || (ctxid < 0))) {
dev_err(dev, "%s: ctxid (%d) invalid!\n", __func__, ctxid);
rc = -EPERM;
goto err2;
}
file = cxl_get_fd(ctx, &cfg->cxl_fops, &fd);
if (unlikely(fd < 0)) {
rc = -ENODEV;
dev_err(dev, "%s: Could not get file descriptor\n", __func__);
goto err2;
}
/* Update with new MMIO area based on updated context id */
ctxi->ctrl_map = &afu->afu_map->ctrls[ctxid].ctrl;
rc = afu_attach(cfg, ctxi);
if (rc) {
dev_err(dev, "%s: Could not attach AFU rc %d\n", __func__, rc);
goto err3;
}
/*
* No error paths after this point. Once the fd is installed it's
* visible to user space and can't be undone safely on this thread.
*/
ctxi->ctxid = ENCODE_CTXID(ctxi, ctxid);
ctxi->ctx = ctx;
ctxi->file = file;
/*
* Put context back in table (note the reinit of the context list);
* we must first drop the context's mutex and then acquire it in
* order with the table/list mutex to avoid a deadlock - safe to do
* here because no one can find us at this moment in time.
*/
mutex_unlock(&ctxi->mutex);
mutex_lock(&cfg->ctx_tbl_list_mutex);
mutex_lock(&ctxi->mutex);
list_del_init(&ctxi->list);
cfg->ctx_tbl[ctxid] = ctxi;
mutex_unlock(&cfg->ctx_tbl_list_mutex);
fd_install(fd, file);
*adap_fd = fd;
out:
dev_dbg(dev, "%s: returning ctxid=%d fd=%d rc=%d\n",
__func__, ctxid, fd, rc);
return rc;
err3:
fput(file);
put_unused_fd(fd);
err2:
cxl_stop_context(ctx);
err1:
cxl_release_context(ctx);
goto out;
}
/**
* cxlflash_afu_recover() - initiates AFU recovery
* @sdev: SCSI device associated with LUN.
* @recover: Recover ioctl data structure.
*
* Only a single recovery is allowed at a time to avoid exhausting CXL
* resources (leading to recovery failure) in the event that we're up
* against the maximum number of contexts limit. For similar reasons,
* a context recovery is retried if there are multiple recoveries taking
* place at the same time and the failure was due to CXL services being
* unable to keep up.
*
* As this routine is called on ioctl context, it holds the ioctl r/w
* semaphore that is used to drain ioctls in recovery scenarios. The
* implementation to achieve the pacing described above (a local mutex)
* requires that the ioctl r/w semaphore be dropped and reacquired to
* avoid a 3-way deadlock when multiple process recoveries operate in
* parallel.
*
* Because a user can detect an error condition before the kernel, it is
* quite possible for this routine to act as the kernel's EEH detection
* source (MMIO read of mbox_r). Because of this, there is a window of
* time where an EEH might have been detected but not yet 'serviced'
* (callback invoked, causing the device to enter reset state). To avoid
* looping in this routine during that window, a 1 second sleep is in place
* between the time the MMIO failure is detected and the time a wait on the
* reset wait queue is attempted via check_state().
*
* Return: 0 on success, -errno on failure
*/
static int cxlflash_afu_recover(struct scsi_device *sdev,
struct dk_cxlflash_recover_afu *recover)
{
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct llun_info *lli = sdev->hostdata;
struct afu *afu = cfg->afu;
struct ctx_info *ctxi = NULL;
struct mutex *mutex = &cfg->ctx_recovery_mutex;
u64 ctxid = DECODE_CTXID(recover->context_id),
rctxid = recover->context_id;
long reg;
int lretry = 20; /* up to 2 seconds */
int new_adap_fd = -1;
int rc = 0;
atomic_inc(&cfg->recovery_threads);
up_read(&cfg->ioctl_rwsem);
rc = mutex_lock_interruptible(mutex);
down_read(&cfg->ioctl_rwsem);
if (rc)
goto out;
rc = check_state(cfg);
if (rc) {
dev_err(dev, "%s: Failed state! rc=%d\n", __func__, rc);
rc = -ENODEV;
goto out;
}
dev_dbg(dev, "%s: reason 0x%016llX rctxid=%016llX\n",
__func__, recover->reason, rctxid);
retry:
/* Ensure that this process is attached to the context */
ctxi = get_context(cfg, rctxid, lli, CTX_CTRL_ERR_FALLBACK);
if (unlikely(!ctxi)) {
dev_dbg(dev, "%s: Bad context! (%llu)\n", __func__, ctxid);
rc = -EINVAL;
goto out;
}
if (ctxi->err_recovery_active) {
retry_recover:
rc = recover_context(cfg, ctxi, &new_adap_fd);
if (unlikely(rc)) {
dev_err(dev, "%s: Recovery failed for context %llu (rc=%d)\n",
__func__, ctxid, rc);
if ((rc == -ENODEV) &&
((atomic_read(&cfg->recovery_threads) > 1) ||
(lretry--))) {
dev_dbg(dev, "%s: Going to try again!\n",
__func__);
mutex_unlock(mutex);
msleep(100);
rc = mutex_lock_interruptible(mutex);
if (rc)
goto out;
goto retry_recover;
}
goto out;
}
ctxi->err_recovery_active = false;
recover->context_id = ctxi->ctxid;
recover->adap_fd = new_adap_fd;
recover->mmio_size = sizeof(afu->afu_map->hosts[0].harea);
recover->hdr.return_flags = DK_CXLFLASH_APP_CLOSE_ADAP_FD |
DK_CXLFLASH_RECOVER_AFU_CONTEXT_RESET;
goto out;
}
/* Test if in error state */
reg = readq_be(&afu->ctrl_map->mbox_r);
if (reg == -1) {
dev_dbg(dev, "%s: MMIO fail, wait for recovery.\n", __func__);
/*
* Before checking the state, put back the context obtained with
* get_context() as it is no longer needed and sleep for a short
* period of time (see prolog notes).
*/
put_context(ctxi);
ctxi = NULL;
ssleep(1);
rc = check_state(cfg);
if (unlikely(rc))
goto out;
goto retry;
}
dev_dbg(dev, "%s: MMIO working, no recovery required!\n", __func__);
out:
if (likely(ctxi))
put_context(ctxi);
mutex_unlock(mutex);
atomic_dec_if_positive(&cfg->recovery_threads);
return rc;
}
/**
* process_sense() - evaluates and processes sense data
* @sdev: SCSI device associated with LUN.
* @verify: Verify ioctl data structure.
*
* Return: 0 on success, -errno on failure
*/
static int process_sense(struct scsi_device *sdev,
struct dk_cxlflash_verify *verify)
{
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct llun_info *lli = sdev->hostdata;
struct glun_info *gli = lli->parent;
u64 prev_lba = gli->max_lba;
struct scsi_sense_hdr sshdr = { 0 };
int rc = 0;
rc = scsi_normalize_sense((const u8 *)&verify->sense_data,
DK_CXLFLASH_VERIFY_SENSE_LEN, &sshdr);
if (!rc) {
dev_err(dev, "%s: Failed to normalize sense data!\n", __func__);
rc = -EINVAL;
goto out;
}
switch (sshdr.sense_key) {
case NO_SENSE:
case RECOVERED_ERROR:
/* fall through */
case NOT_READY:
break;
case UNIT_ATTENTION:
switch (sshdr.asc) {
case 0x29: /* Power on Reset or Device Reset */
/* fall through */
case 0x2A: /* Device settings/capacity changed */
rc = read_cap16(sdev, lli);
if (rc) {
rc = -ENODEV;
break;
}
if (prev_lba != gli->max_lba)
dev_dbg(dev, "%s: Capacity changed old=%lld "
"new=%lld\n", __func__, prev_lba,
gli->max_lba);
break;
case 0x3F: /* Report LUNs changed, Rescan. */
scsi_scan_host(cfg->host);
break;
default:
rc = -EIO;
break;
}
break;
default:
rc = -EIO;
break;
}
out:
dev_dbg(dev, "%s: sense_key %x asc %x ascq %x rc %d\n", __func__,
sshdr.sense_key, sshdr.asc, sshdr.ascq, rc);
return rc;
}
/**
* cxlflash_disk_verify() - verifies a LUN is the same and handle size changes
* @sdev: SCSI device associated with LUN.
* @verify: Verify ioctl data structure.
*
* Return: 0 on success, -errno on failure
*/
static int cxlflash_disk_verify(struct scsi_device *sdev,
struct dk_cxlflash_verify *verify)
{
int rc = 0;
struct ctx_info *ctxi = NULL;
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct llun_info *lli = sdev->hostdata;
struct glun_info *gli = lli->parent;
struct sisl_rht_entry *rhte = NULL;
res_hndl_t rhndl = verify->rsrc_handle;
u64 ctxid = DECODE_CTXID(verify->context_id),
rctxid = verify->context_id;
u64 last_lba = 0;
dev_dbg(dev, "%s: ctxid=%llu rhndl=%016llX, hint=%016llX, "
"flags=%016llX\n", __func__, ctxid, verify->rsrc_handle,
verify->hint, verify->hdr.flags);
ctxi = get_context(cfg, rctxid, lli, 0);
if (unlikely(!ctxi)) {
dev_dbg(dev, "%s: Bad context! (%llu)\n", __func__, ctxid);
rc = -EINVAL;
goto out;
}
rhte = get_rhte(ctxi, rhndl, lli);
if (unlikely(!rhte)) {
dev_dbg(dev, "%s: Bad resource handle! (%d)\n",
__func__, rhndl);
rc = -EINVAL;
goto out;
}
/*
* Look at the hint/sense to see if it requires us to redrive
* inquiry (i.e. the Unit attention is due to the WWN changing).
*/
if (verify->hint & DK_CXLFLASH_VERIFY_HINT_SENSE) {
/* Can't hold mutex across process_sense/read_cap16,
* since we could have an intervening EEH event.
*/
ctxi->unavail = true;
mutex_unlock(&ctxi->mutex);
rc = process_sense(sdev, verify);
if (unlikely(rc)) {
dev_err(dev, "%s: Failed to validate sense data (%d)\n",
__func__, rc);
mutex_lock(&ctxi->mutex);
ctxi->unavail = false;
goto out;
}
mutex_lock(&ctxi->mutex);
ctxi->unavail = false;
}
switch (gli->mode) {
case MODE_PHYSICAL:
last_lba = gli->max_lba;
break;
case MODE_VIRTUAL:
/* Cast lxt_cnt to u64 for multiply to be treated as 64bit op */
last_lba = ((u64)rhte->lxt_cnt * MC_CHUNK_SIZE * gli->blk_len);
last_lba /= CXLFLASH_BLOCK_SIZE;
last_lba--;
break;
default:
WARN(1, "Unsupported LUN mode!");
}
verify->last_lba = last_lba;
out:
if (likely(ctxi))
put_context(ctxi);
dev_dbg(dev, "%s: returning rc=%d llba=%llX\n",
__func__, rc, verify->last_lba);
return rc;
}
/**
* decode_ioctl() - translates an encoded ioctl to an easily identifiable string
* @cmd: The ioctl command to decode.
*
* Return: A string identifying the decoded ioctl.
*/
static char *decode_ioctl(int cmd)
{
switch (cmd) {
case DK_CXLFLASH_ATTACH:
return __stringify_1(DK_CXLFLASH_ATTACH);
case DK_CXLFLASH_USER_DIRECT:
return __stringify_1(DK_CXLFLASH_USER_DIRECT);
case DK_CXLFLASH_USER_VIRTUAL:
return __stringify_1(DK_CXLFLASH_USER_VIRTUAL);
case DK_CXLFLASH_VLUN_RESIZE:
return __stringify_1(DK_CXLFLASH_VLUN_RESIZE);
case DK_CXLFLASH_RELEASE:
return __stringify_1(DK_CXLFLASH_RELEASE);
case DK_CXLFLASH_DETACH:
return __stringify_1(DK_CXLFLASH_DETACH);
case DK_CXLFLASH_VERIFY:
return __stringify_1(DK_CXLFLASH_VERIFY);
case DK_CXLFLASH_VLUN_CLONE:
return __stringify_1(DK_CXLFLASH_VLUN_CLONE);
case DK_CXLFLASH_RECOVER_AFU:
return __stringify_1(DK_CXLFLASH_RECOVER_AFU);
case DK_CXLFLASH_MANAGE_LUN:
return __stringify_1(DK_CXLFLASH_MANAGE_LUN);
}
return "UNKNOWN";
}
/**
* cxlflash_disk_direct_open() - opens a direct (physical) disk
* @sdev: SCSI device associated with LUN.
* @arg: UDirect ioctl data structure.
*
* On successful return, the user is informed of the resource handle
* to be used to identify the direct lun and the size (in blocks) of
* the direct lun in last LBA format.
*
* Return: 0 on success, -errno on failure
*/
static int cxlflash_disk_direct_open(struct scsi_device *sdev, void *arg)
{
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct afu *afu = cfg->afu;
struct llun_info *lli = sdev->hostdata;
struct glun_info *gli = lli->parent;
struct dk_cxlflash_udirect *pphys = (struct dk_cxlflash_udirect *)arg;
u64 ctxid = DECODE_CTXID(pphys->context_id),
rctxid = pphys->context_id;
u64 lun_size = 0;
u64 last_lba = 0;
u64 rsrc_handle = -1;
u32 port = CHAN2PORT(sdev->channel);
int rc = 0;
struct ctx_info *ctxi = NULL;
struct sisl_rht_entry *rhte = NULL;
pr_debug("%s: ctxid=%llu ls=0x%llx\n", __func__, ctxid, lun_size);
rc = cxlflash_lun_attach(gli, MODE_PHYSICAL, false);
if (unlikely(rc)) {
dev_dbg(dev, "%s: Failed to attach to LUN! (PHYSICAL)\n",
__func__);
goto out;
}
ctxi = get_context(cfg, rctxid, lli, 0);
if (unlikely(!ctxi)) {
dev_dbg(dev, "%s: Bad context! (%llu)\n", __func__, ctxid);
rc = -EINVAL;
goto err1;
}
rhte = rhte_checkout(ctxi, lli);
if (unlikely(!rhte)) {
dev_dbg(dev, "%s: too many opens for this context\n", __func__);
rc = -EMFILE; /* too many opens */
goto err1;
}
rsrc_handle = (rhte - ctxi->rht_start);
rht_format1(rhte, lli->lun_id[sdev->channel], ctxi->rht_perms, port);
cxlflash_afu_sync(afu, ctxid, rsrc_handle, AFU_LW_SYNC);
last_lba = gli->max_lba;
pphys->hdr.return_flags = 0;
pphys->last_lba = last_lba;
pphys->rsrc_handle = rsrc_handle;
out:
if (likely(ctxi))
put_context(ctxi);
dev_dbg(dev, "%s: returning handle 0x%llx rc=%d llba %lld\n",
__func__, rsrc_handle, rc, last_lba);
return rc;
err1:
cxlflash_lun_detach(gli);
goto out;
}
/**
* ioctl_common() - common IOCTL handler for driver
* @sdev: SCSI device associated with LUN.
* @cmd: IOCTL command.
*
* Handles common fencing operations that are valid for multiple ioctls. Always
* allow through ioctls that are cleanup oriented in nature, even when operating
* in a failed/terminating state.
*
* Return: 0 on success, -errno on failure
*/
static int ioctl_common(struct scsi_device *sdev, int cmd)
{
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct llun_info *lli = sdev->hostdata;
int rc = 0;
if (unlikely(!lli)) {
dev_dbg(dev, "%s: Unknown LUN\n", __func__);
rc = -EINVAL;
goto out;
}
rc = check_state(cfg);
if (unlikely(rc) && (cfg->state == STATE_FAILTERM)) {
switch (cmd) {
case DK_CXLFLASH_VLUN_RESIZE:
case DK_CXLFLASH_RELEASE:
case DK_CXLFLASH_DETACH:
dev_dbg(dev, "%s: Command override! (%d)\n",
__func__, rc);
rc = 0;
break;
}
}
out:
return rc;
}
/**
* cxlflash_ioctl() - IOCTL handler for driver
* @sdev: SCSI device associated with LUN.
* @cmd: IOCTL command.
* @arg: Userspace ioctl data structure.
*
* A read/write semaphore is used to implement a 'drain' of currently
* running ioctls. The read semaphore is taken at the beginning of each
* ioctl thread and released upon concluding execution. Additionally the
* semaphore should be released and then reacquired in any ioctl execution
* path which will wait for an event to occur that is outside the scope of
* the ioctl (i.e. an adapter reset). To drain the ioctls currently running,
* a thread simply needs to acquire the write semaphore.
*
* Return: 0 on success, -errno on failure
*/
int cxlflash_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
{
typedef int (*sioctl) (struct scsi_device *, void *);
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct afu *afu = cfg->afu;
struct dk_cxlflash_hdr *hdr;
char buf[sizeof(union cxlflash_ioctls)];
size_t size = 0;
bool known_ioctl = false;
int idx;
int rc = 0;
struct Scsi_Host *shost = sdev->host;
sioctl do_ioctl = NULL;
static const struct {
size_t size;
sioctl ioctl;
} ioctl_tbl[] = { /* NOTE: order matters here */
{sizeof(struct dk_cxlflash_attach), (sioctl)cxlflash_disk_attach},
{sizeof(struct dk_cxlflash_udirect), cxlflash_disk_direct_open},
{sizeof(struct dk_cxlflash_release), (sioctl)cxlflash_disk_release},
{sizeof(struct dk_cxlflash_detach), (sioctl)cxlflash_disk_detach},
{sizeof(struct dk_cxlflash_verify), (sioctl)cxlflash_disk_verify},
{sizeof(struct dk_cxlflash_recover_afu), (sioctl)cxlflash_afu_recover},
{sizeof(struct dk_cxlflash_manage_lun), (sioctl)cxlflash_manage_lun},
{sizeof(struct dk_cxlflash_uvirtual), cxlflash_disk_virtual_open},
{sizeof(struct dk_cxlflash_resize), (sioctl)cxlflash_vlun_resize},
{sizeof(struct dk_cxlflash_clone), (sioctl)cxlflash_disk_clone},
};
/* Hold read semaphore so we can drain if needed */
down_read(&cfg->ioctl_rwsem);
/* Restrict command set to physical support only for internal LUN */
if (afu->internal_lun)
switch (cmd) {
case DK_CXLFLASH_RELEASE:
case DK_CXLFLASH_USER_VIRTUAL:
case DK_CXLFLASH_VLUN_RESIZE:
case DK_CXLFLASH_VLUN_CLONE:
dev_dbg(dev, "%s: %s not supported for lun_mode=%d\n",
__func__, decode_ioctl(cmd), afu->internal_lun);
rc = -EINVAL;
goto cxlflash_ioctl_exit;
}
switch (cmd) {
case DK_CXLFLASH_ATTACH:
case DK_CXLFLASH_USER_DIRECT:
case DK_CXLFLASH_RELEASE:
case DK_CXLFLASH_DETACH:
case DK_CXLFLASH_VERIFY:
case DK_CXLFLASH_RECOVER_AFU:
case DK_CXLFLASH_USER_VIRTUAL:
case DK_CXLFLASH_VLUN_RESIZE:
case DK_CXLFLASH_VLUN_CLONE:
dev_dbg(dev, "%s: %s (%08X) on dev(%d/%d/%d/%llu)\n",
__func__, decode_ioctl(cmd), cmd, shost->host_no,
sdev->channel, sdev->id, sdev->lun);
rc = ioctl_common(sdev, cmd);
if (unlikely(rc))
goto cxlflash_ioctl_exit;
/* fall through */
case DK_CXLFLASH_MANAGE_LUN:
known_ioctl = true;
idx = _IOC_NR(cmd) - _IOC_NR(DK_CXLFLASH_ATTACH);
size = ioctl_tbl[idx].size;
do_ioctl = ioctl_tbl[idx].ioctl;
if (likely(do_ioctl))
break;
/* fall through */
default:
rc = -EINVAL;
goto cxlflash_ioctl_exit;
}
if (unlikely(copy_from_user(&buf, arg, size))) {
dev_err(dev, "%s: copy_from_user() fail! "
"size=%lu cmd=%d (%s) arg=%p\n",
__func__, size, cmd, decode_ioctl(cmd), arg);
rc = -EFAULT;
goto cxlflash_ioctl_exit;
}
hdr = (struct dk_cxlflash_hdr *)&buf;
if (hdr->version != DK_CXLFLASH_VERSION_0) {
dev_dbg(dev, "%s: Version %u not supported for %s\n",
__func__, hdr->version, decode_ioctl(cmd));
rc = -EINVAL;
goto cxlflash_ioctl_exit;
}
if (hdr->rsvd[0] || hdr->rsvd[1] || hdr->rsvd[2] || hdr->return_flags) {
dev_dbg(dev, "%s: Reserved/rflags populated!\n", __func__);
rc = -EINVAL;
goto cxlflash_ioctl_exit;
}
rc = do_ioctl(sdev, (void *)&buf);
if (likely(!rc))
if (unlikely(copy_to_user(arg, &buf, size))) {
dev_err(dev, "%s: copy_to_user() fail! "
"size=%lu cmd=%d (%s) arg=%p\n",
__func__, size, cmd, decode_ioctl(cmd), arg);
rc = -EFAULT;
}
/* fall through to exit */
cxlflash_ioctl_exit:
up_read(&cfg->ioctl_rwsem);
if (unlikely(rc && known_ioctl))
dev_err(dev, "%s: ioctl %s (%08X) on dev(%d/%d/%d/%llu) "
"returned rc %d\n", __func__,
decode_ioctl(cmd), cmd, shost->host_no,
sdev->channel, sdev->id, sdev->lun, rc);
else
dev_dbg(dev, "%s: ioctl %s (%08X) on dev(%d/%d/%d/%llu) "
"returned rc %d\n", __func__, decode_ioctl(cmd),
cmd, shost->host_no, sdev->channel, sdev->id,
sdev->lun, rc);
return rc;
}