blob: 48aa45acc9538bac4c0e86a5056c446e5d9ca537 [file] [log] [blame]
What: /sys/class/most/mostcore/aims
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
List of AIMs that have been loaded.
Users:
What: /sys/class/most/mostcore/aims/<aim>/add_link
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is used to establish a connection of a channel and the
current AIM.
Users:
What: /sys/class/most/mostcore/aims/<aim>/remove_link
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is used to remove a connected channel from the
current AIM.
Users:
What: /sys/class/most/mostcore/devices
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
List of attached MOST interfaces.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/description
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
Provides information about the interface type and the physical
location of the device. Hardware attached via USB, for instance,
might return <usb_device 1-1.1:1.0>
Users:
What: /sys/class/most/mostcore/devices/<mdev>/interface
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
Indicates the type of peripheral interface the current device
uses.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/dci
Date: June 2016
KernelVersion: 4.9
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
If the network interface controller is attached via USB, a dci
directory is created that allows applications to use the
controller's direct communication interface (DCI) to exchange
information.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/dci/arb_address
Date: June 2016
KernelVersion: 4.9
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is used to set an arbitrary DCI register address an
application wants to read from or write to.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/dci/arb_value
Date: June 2016
KernelVersion: 4.9
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is used to read from or write to the arbitrary DCI register
whose address is stored in arb_address.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/dci/mep_eui48_hi
Date: June 2016
KernelVersion: 4.9
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is used to check and configure the MAC address.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/dci/mep_eui48_lo
Date: June 2016
KernelVersion: 4.9
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is used to check and configure the MAC address.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/dci/mep_eui48_mi
Date: June 2016
KernelVersion: 4.9
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is used to check and configure the MAC address.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/dci/mep_filter
Date: June 2016
KernelVersion: 4.9
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is used to check and configure the MEP filter address.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/dci/mep_hash0
Date: June 2016
KernelVersion: 4.9
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is used to check and configure the MEP hash table.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/dci/mep_hash1
Date: June 2016
KernelVersion: 4.9
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is used to check and configure the MEP hash table.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/dci/mep_hash2
Date: June 2016
KernelVersion: 4.9
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is used to check and configure the MEP hash table.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/dci/mep_hash3
Date: June 2016
KernelVersion: 4.9
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is used to check and configure the MEP hash table.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/dci/ni_state
Date: June 2016
KernelVersion: 4.9
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
Indicates the current network interface state.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/dci/node_address
Date: June 2016
KernelVersion: 4.9
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
Indicates the current node address.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/dci/node_position
Date: June 2016
KernelVersion: 4.9
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
Indicates the current node position.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/dci/packet_bandwidth
Date: June 2016
KernelVersion: 4.9
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
Indicates the configured packet bandwidth.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/dci/sync_ep
Date: June 2016
KernelVersion: 4.9
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
Triggers the controller's synchronization process for a certain
endpoint.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/<channel>/
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
For every channel of the device a directory is created, whose
name is dictated by the HDM. This enables an application to
collect information about the channel's capabilities and
configure it.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/<channel>/available_datatypes
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
Indicates the data types the current channel can transport.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/<channel>/available_directions
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
Indicates the directions the current channel is capable of.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/<channel>/number_of_packet_buffers
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
Indicates the number of packet buffers the current channel can
handle.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/<channel>/number_of_stream_buffers
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
Indicates the number of streaming buffers the current channel can
handle.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/<channel>/size_of_packet_buffer
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
Indicates the size of a packet buffer the current channel can
handle.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/<channel>/size_of_stream_buffer
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
Indicates the size of a streaming buffer the current channel can
handle.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/<channel>/set_number_of_buffers
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is to configure the number of buffers of the current channel.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/<channel>/set_buffer_size
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is to configure the size of a buffer of the current channel.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/<channel>/set_direction
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is to configure the direction of the current channel.
The following strings will be accepted:
'dir_tx',
'dir_rx'
Users:
What: /sys/class/most/mostcore/devices/<mdev>/<channel>/set_datatype
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is to configure the data type of the current channel.
The following strings will be accepted:
'control',
'async',
'sync',
'isoc_avp'
Users:
What: /sys/class/most/mostcore/devices/<mdev>/<channel>/set_subbuffer_size
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is to configure the subbuffer size of the current channel.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/<channel>/set_packets_per_xact
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
This is to configure the number of packets per transaction of
the current channel. This is only needed network interface
controller is attached via USB.
Users:
What: /sys/class/most/mostcore/devices/<mdev>/<channel>/channel_starving
Date: June 2015
KernelVersion: 4.3
Contact: Christian Gromm <christian.gromm@microchip.com>
Description:
Indicates whether current channel ran out of buffers.
Users: