blob: d5069b2d4d79f039262c00cf498fdaf1266bec4f [file] [log] [blame]
/*
* 8250_moxa.c - MOXA Smartio/Industio MUE multiport serial driver.
*
* Author: Mathieu OTHACEHE <m.othacehe@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/pci.h>
#include "8250.h"
#define PCI_DEVICE_ID_MOXA_CP102E 0x1024
#define PCI_DEVICE_ID_MOXA_CP102EL 0x1025
#define PCI_DEVICE_ID_MOXA_CP104EL_A 0x1045
#define PCI_DEVICE_ID_MOXA_CP114EL 0x1144
#define PCI_DEVICE_ID_MOXA_CP116E_A_A 0x1160
#define PCI_DEVICE_ID_MOXA_CP116E_A_B 0x1161
#define PCI_DEVICE_ID_MOXA_CP118EL_A 0x1182
#define PCI_DEVICE_ID_MOXA_CP118E_A_I 0x1183
#define PCI_DEVICE_ID_MOXA_CP132EL 0x1322
#define PCI_DEVICE_ID_MOXA_CP134EL_A 0x1342
#define PCI_DEVICE_ID_MOXA_CP138E_A 0x1381
#define PCI_DEVICE_ID_MOXA_CP168EL_A 0x1683
#define MOXA_BASE_BAUD 921600
#define MOXA_UART_OFFSET 0x200
#define MOXA_BASE_BAR 1
struct moxa8250_board {
unsigned int num_ports;
int line[0];
};
enum {
moxa8250_2p = 0,
moxa8250_4p,
moxa8250_8p
};
static struct moxa8250_board moxa8250_boards[] = {
[moxa8250_2p] = { .num_ports = 2},
[moxa8250_4p] = { .num_ports = 4},
[moxa8250_8p] = { .num_ports = 8},
};
static int moxa8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct uart_8250_port uart;
struct moxa8250_board *brd;
void __iomem *ioaddr;
resource_size_t baseaddr;
unsigned int i, nr_ports;
unsigned int offset;
int ret;
brd = &moxa8250_boards[id->driver_data];
nr_ports = brd->num_ports;
ret = pcim_enable_device(pdev);
if (ret)
return ret;
brd = devm_kzalloc(&pdev->dev, sizeof(struct moxa8250_board) +
sizeof(unsigned int) * nr_ports, GFP_KERNEL);
if (!brd)
return -ENOMEM;
brd->num_ports = nr_ports;
memset(&uart, 0, sizeof(struct uart_8250_port));
uart.port.dev = &pdev->dev;
uart.port.irq = pdev->irq;
uart.port.uartclk = MOXA_BASE_BAUD * 16;
uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
baseaddr = pci_resource_start(pdev, MOXA_BASE_BAR);
ioaddr = pcim_iomap(pdev, MOXA_BASE_BAR, 0);
if (!ioaddr)
return -ENOMEM;
for (i = 0; i < nr_ports; i++) {
/*
* MOXA Smartio MUE boards with 4 ports have
* a different offset for port #3
*/
if (nr_ports == 4 && i == 3)
offset = 7 * MOXA_UART_OFFSET;
else
offset = i * MOXA_UART_OFFSET;
uart.port.iotype = UPIO_MEM;
uart.port.iobase = 0;
uart.port.mapbase = baseaddr + offset;
uart.port.membase = ioaddr + offset;
uart.port.regshift = 0;
dev_dbg(&pdev->dev, "Setup PCI port: port %lx, irq %d, type %d\n",
uart.port.iobase, uart.port.irq, uart.port.iotype);
brd->line[i] = serial8250_register_8250_port(&uart);
if (brd->line[i] < 0) {
dev_err(&pdev->dev,
"Couldn't register serial port %lx, irq %d, type %d, error %d\n",
uart.port.iobase, uart.port.irq,
uart.port.iotype, brd->line[i]);
break;
}
}
pci_set_drvdata(pdev, brd);
return 0;
}
static void moxa8250_remove(struct pci_dev *pdev)
{
struct moxa8250_board *brd = pci_get_drvdata(pdev);
unsigned int i;
for (i = 0; i < brd->num_ports; i++)
serial8250_unregister_port(brd->line[i]);
}
#define MOXA_DEVICE(id, data) { PCI_VDEVICE(MOXA, id), (kernel_ulong_t)data }
static const struct pci_device_id pci_ids[] = {
MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP102E, moxa8250_2p),
MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP102EL, moxa8250_2p),
MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP104EL_A, moxa8250_4p),
MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP114EL, moxa8250_4p),
MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP116E_A_A, moxa8250_8p),
MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP116E_A_B, moxa8250_8p),
MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP118EL_A, moxa8250_8p),
MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP118E_A_I, moxa8250_8p),
MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP132EL, moxa8250_2p),
MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP134EL_A, moxa8250_4p),
MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP138E_A, moxa8250_8p),
MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP168EL_A, moxa8250_8p),
{0}
};
MODULE_DEVICE_TABLE(pci, pci_ids);
static struct pci_driver moxa8250_pci_driver = {
.name = "8250_moxa",
.id_table = pci_ids,
.probe = moxa8250_probe,
.remove = moxa8250_remove,
};
module_pci_driver(moxa8250_pci_driver);
MODULE_AUTHOR("Mathieu OTHACEHE");
MODULE_DESCRIPTION("MOXA SmartIO MUE driver");
MODULE_LICENSE("GPL v2");