blob: 5f55d0a50a28622614ec6142eb0ff19746dfaade [file] [log] [blame]
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "brcm,bcm7420";
cpus {
#address-cells = <1>;
#size-cells = <0>;
mips-hpt-frequency = <93750000>;
cpu@0 {
compatible = "brcm,bmips5000";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "brcm,bmips5000";
device_type = "cpu";
reg = <1>;
};
};
aliases {
uart0 = &uart0;
};
cpu_intc: cpu_intc {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
interrupt-controller;
#interrupt-cells = <1>;
};
clocks {
uart_clk: uart_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <81000000>;
};
};
rdb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>;
periph_intc: periph_intc@441400 {
compatible = "brcm,bcm7038-l1-intc";
reg = <0x441400 0x30>, <0x441600 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <2>, <3>;
};
sun_l2_intc: sun_l2_intc@401800 {
compatible = "brcm,l2-intc";
reg = <0x401800 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <23>;
};
gisb-arb@400000 {
compatible = "brcm,bcm7400-gisb-arb";
reg = <0x400000 0xdc>;
native-endian;
interrupt-parent = <&sun_l2_intc>;
interrupts = <0>, <2>;
brcm,gisb-arb-master-mask = <0x3ff>;
brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0",
"pcie_0", "bsp_0", "rdc_0",
"rptd_0", "avd_0", "avd_1",
"jtag_0";
};
upg_irq0_intc: upg_irq0_intc@406780 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>;
brcm,int-map-mask = <0x44>;
brcm,int-fwd-mask = <0x70000>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <18>;
};
sun_top_ctrl: syscon@404000 {
compatible = "brcm,bcm7420-sun-top-ctrl", "syscon";
reg = <0x404000 0x60c>;
little-endian;
};
reboot {
compatible = "brcm,bcm7038-reboot";
syscon = <&sun_top_ctrl 0x8 0x14>;
};
uart0: serial@406b00 {
compatible = "ns16550a";
reg = <0x406b00 0x20>;
reg-io-width = <0x4>;
reg-shift = <0x2>;
interrupt-parent = <&periph_intc>;
interrupts = <21>;
clocks = <&uart_clk>;
status = "disabled";
};
enet0: ethernet@468000 {
phy-mode = "internal";
phy-handle = <&phy1>;
mac-address = [ 00 10 18 36 23 1a ];
compatible = "brcm,genet-v1";
#address-cells = <0x1>;
#size-cells = <0x1>;
reg = <0x468000 0x3c8c>;
interrupts = <69>, <79>;
interrupt-parent = <&periph_intc>;
status = "disabled";
mdio@e14 {
compatible = "brcm,genet-mdio-v1";
#address-cells = <0x1>;
#size-cells = <0x0>;
reg = <0xe14 0x8>;
phy1: ethernet-phy@1 {
max-speed = <100>;
reg = <0x1>;
compatible = "brcm,65nm-ephy",
"ethernet-phy-ieee802.3-c22";
};
};
};
ehci0: usb@488300 {
compatible = "brcm,bcm7420-ehci", "generic-ehci";
reg = <0x488300 0x100>;
interrupt-parent = <&periph_intc>;
interrupts = <60>;
status = "disabled";
};
ohci0: usb@488400 {
compatible = "brcm,bcm7420-ohci", "generic-ohci";
reg = <0x488400 0x100>;
native-endian;
no-big-frame-no;
interrupt-parent = <&periph_intc>;
interrupts = <61>;
status = "disabled";
};
ehci1: usb@488500 {
compatible = "brcm,bcm7420-ehci", "generic-ehci";
reg = <0x488500 0x100>;
interrupt-parent = <&periph_intc>;
interrupts = <55>;
status = "disabled";
};
ohci1: usb@488600 {
compatible = "brcm,bcm7420-ohci", "generic-ohci";
reg = <0x488600 0x100>;
native-endian;
no-big-frame-no;
interrupt-parent = <&periph_intc>;
interrupts = <62>;
status = "disabled";
};
};
};