drivers/iio/accel/st_accel_core.c

/*
 * STMicroelectronics accelerometers driver
 *
 * Copyright 2012-2013 STMicroelectronics Inc.
 *
 * Denis Ciocca <denis.ciocca@st.com>
 *
 * Licensed under the GPL-2.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/trigger.h>
#include <linux/iio/buffer.h>

#include <linux/iio/common/st_sensors.h>
#include "st_accel.h"

#define ST_ACCEL_IRQ_NAME	"st_accel_int"

#define ST_ACCEL_NUMBER_DATA_CHANNELS		3

/* DEFAULT VALUE FOR SENSORS */
#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR		0x28
#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR		0x2a
#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR		0x2c

/* FULLSCALE */
#define ST_ACCEL_FS_AVL_2G			2
#define ST_ACCEL_FS_AVL_4G			4
#define ST_ACCEL_FS_AVL_6G			6
#define ST_ACCEL_FS_AVL_8G			8
#define ST_ACCEL_FS_AVL_16G			16

/* CUSTOM VALUES FOR SENSOR 1 */
#define ST_ACCEL_1_WAI_EXP			0x33
#define ST_ACCEL_1_ODR_ADDR			0x20
#define ST_ACCEL_1_ODR_MASK			0xf0
#define ST_ACCEL_1_ODR_AVL_1HZ_VAL		0x01
#define ST_ACCEL_1_ODR_AVL_10HZ_VAL		0x02
#define ST_ACCEL_1_ODR_AVL_25HZ_VAL		0x03
#define ST_ACCEL_1_ODR_AVL_50HZ_VAL		0x04
#define ST_ACCEL_1_ODR_AVL_100HZ_VAL		0x05
#define ST_ACCEL_1_ODR_AVL_200HZ_VAL		0x06
#define ST_ACCEL_1_ODR_AVL_400HZ_VAL		0x07
#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL		0x08
#define ST_ACCEL_1_FS_ADDR			0x23
#define ST_ACCEL_1_FS_MASK			0x30
#define ST_ACCEL_1_FS_AVL_2_VAL			0x00
#define ST_ACCEL_1_FS_AVL_4_VAL			0x01
#define ST_ACCEL_1_FS_AVL_8_VAL			0x02
#define ST_ACCEL_1_FS_AVL_16_VAL		0x03
#define ST_ACCEL_1_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(1000)
#define ST_ACCEL_1_FS_AVL_4_GAIN		IIO_G_TO_M_S_2(2000)
#define ST_ACCEL_1_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(4000)
#define ST_ACCEL_1_FS_AVL_16_GAIN		IIO_G_TO_M_S_2(12000)
#define ST_ACCEL_1_BDU_ADDR			0x23
#define ST_ACCEL_1_BDU_MASK			0x80
#define ST_ACCEL_1_DRDY_IRQ_ADDR		0x22
#define ST_ACCEL_1_DRDY_IRQ_INT1_MASK		0x10
#define ST_ACCEL_1_DRDY_IRQ_INT2_MASK		0x08
#define ST_ACCEL_1_HP_FILTER_ADDR		0x21
#define ST_ACCEL_1_HP_FILTER_HPIS1_MASK		0x01
#define ST_ACCEL_1_HP_FILTER_FDS_MASK		0x08
#define ST_ACCEL_1_AOI1_IRQ_ADDR		0x22
#define ST_ACCEL_1_AOI1_IRQ_MASK		0x40
#define ST_ACCEL_1_REF_DATA_CAPTURE_ADDR	0x26
#define ST_ACCEL_1_REF_DATA_CAPTURE_MASK	0xff
#define ST_ACCEL_1_THS_ADDR			0x32
#define ST_ACCEL_1_THS_MASK			0x7f
#define ST_ACCEL_1_DUR_ADDR			0x33
#define ST_ACCEL_1_DUR_MASK			0x7f
#define ST_ACCEL_INT1_XL_ON_SHIFT		0x0
#define ST_ACCEL_INT1_XH_ON_SHIFT		0x1
#define ST_ACCEL_INT1_YL_ON_SHIFT		0x2
#define ST_ACCEL_INT1_YH_ON_SHIFT		0x3
#define ST_ACCEL_INT1_ZL_ON_SHIFT		0x4
#define ST_ACCEL_INT1_ZH_ON_SHIFT		0x5
#define ST_ACCEL_INT1_OR_XH_YH_ZH_VALUE_OFF	0x00
#define ST_ACCEL_1_INT1_CFG_ADDR		0x30
#define ST_ACCEL_1_INT1_CFG_MASK		0xff
#define ST_ACCEL_1_INT1_SRC_ADDR		0x31
#define ST_ACCEL_1_INT1_SRC_MASK		0x7f
#define ST_ACCEL_1_LIR1_CFG_ADDR		0x24
#define ST_ACCEL_1_LIR1_CFG_MASK		0x08
#define ST_ACCEL_1_MULTIREAD_BIT		true

/* CUSTOM VALUES FOR SENSOR 2 */
#define ST_ACCEL_2_WAI_EXP			0x32
#define ST_ACCEL_2_ODR_ADDR			0x20
#define ST_ACCEL_2_ODR_MASK			0x18
#define ST_ACCEL_2_ODR_AVL_50HZ_VAL		0x00
#define ST_ACCEL_2_ODR_AVL_100HZ_VAL		0x01
#define ST_ACCEL_2_ODR_AVL_400HZ_VAL		0x02
#define ST_ACCEL_2_ODR_AVL_1000HZ_VAL		0x03
#define ST_ACCEL_2_PW_ADDR			0x20
#define ST_ACCEL_2_PW_MASK			0xe0
#define ST_ACCEL_2_FS_ADDR			0x23
#define ST_ACCEL_2_FS_MASK			0x30
#define ST_ACCEL_2_FS_AVL_2_VAL			0X00
#define ST_ACCEL_2_FS_AVL_4_VAL			0X01
#define ST_ACCEL_2_FS_AVL_8_VAL			0x03
#define ST_ACCEL_2_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(1000)
#define ST_ACCEL_2_FS_AVL_4_GAIN		IIO_G_TO_M_S_2(2000)
#define ST_ACCEL_2_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(3900)
#define ST_ACCEL_2_BDU_ADDR			0x23
#define ST_ACCEL_2_BDU_MASK			0x80
#define ST_ACCEL_2_DRDY_IRQ_ADDR		0x22
#define ST_ACCEL_2_DRDY_IRQ_INT1_MASK		0x02
#define ST_ACCEL_2_DRDY_IRQ_INT2_MASK		0x10
#define ST_ACCEL_2_MULTIREAD_BIT		true

/* CUSTOM VALUES FOR SENSOR 3 */
#define ST_ACCEL_3_WAI_EXP			0x40
#define ST_ACCEL_3_ODR_ADDR			0x20
#define ST_ACCEL_3_ODR_MASK			0xf0
#define ST_ACCEL_3_ODR_AVL_3HZ_VAL		0x01
#define ST_ACCEL_3_ODR_AVL_6HZ_VAL		0x02
#define ST_ACCEL_3_ODR_AVL_12HZ_VAL		0x03
#define ST_ACCEL_3_ODR_AVL_25HZ_VAL		0x04
#define ST_ACCEL_3_ODR_AVL_50HZ_VAL		0x05
#define ST_ACCEL_3_ODR_AVL_100HZ_VAL		0x06
#define ST_ACCEL_3_ODR_AVL_200HZ_VAL		0x07
#define ST_ACCEL_3_ODR_AVL_400HZ_VAL		0x08
#define ST_ACCEL_3_ODR_AVL_800HZ_VAL		0x09
#define ST_ACCEL_3_ODR_AVL_1600HZ_VAL		0x0a
#define ST_ACCEL_3_FS_ADDR			0x24
#define ST_ACCEL_3_FS_MASK			0x38
#define ST_ACCEL_3_FS_AVL_2_VAL			0X00
#define ST_ACCEL_3_FS_AVL_4_VAL			0X01
#define ST_ACCEL_3_FS_AVL_6_VAL			0x02
#define ST_ACCEL_3_FS_AVL_8_VAL			0x03
#define ST_ACCEL_3_FS_AVL_16_VAL		0x04
#define ST_ACCEL_3_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(61)
#define ST_ACCEL_3_FS_AVL_4_GAIN		IIO_G_TO_M_S_2(122)
#define ST_ACCEL_3_FS_AVL_6_GAIN		IIO_G_TO_M_S_2(183)
#define ST_ACCEL_3_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(244)
#define ST_ACCEL_3_FS_AVL_16_GAIN		IIO_G_TO_M_S_2(732)
#define ST_ACCEL_3_BDU_ADDR			0x20
#define ST_ACCEL_3_BDU_MASK			0x08
#define ST_ACCEL_3_DRDY_IRQ_ADDR		0x23
#define ST_ACCEL_3_DRDY_IRQ_INT1_MASK		0x80
#define ST_ACCEL_3_DRDY_IRQ_INT2_MASK		0x00
#define ST_ACCEL_3_IG1_EN_ADDR			0x23
#define ST_ACCEL_3_IG1_EN_MASK			0x08
#define ST_ACCEL_3_MULTIREAD_BIT		false

/* CUSTOM VALUES FOR SENSOR 4 */
#define ST_ACCEL_4_WAI_EXP			0x3a
#define ST_ACCEL_4_ODR_ADDR			0x20
#define ST_ACCEL_4_ODR_MASK			0x30 /* DF1 and DF0 */
#define ST_ACCEL_4_ODR_AVL_40HZ_VAL		0x00
#define ST_ACCEL_4_ODR_AVL_160HZ_VAL		0x01
#define ST_ACCEL_4_ODR_AVL_640HZ_VAL		0x02
#define ST_ACCEL_4_ODR_AVL_2560HZ_VAL		0x03
#define ST_ACCEL_4_PW_ADDR			0x20
#define ST_ACCEL_4_PW_MASK			0xc0
#define ST_ACCEL_4_FS_ADDR			0x21
#define ST_ACCEL_4_FS_MASK			0x80
#define ST_ACCEL_4_FS_AVL_2_VAL			0X00
#define ST_ACCEL_4_FS_AVL_6_VAL			0X01
#define ST_ACCEL_4_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(1024)
#define ST_ACCEL_4_FS_AVL_6_GAIN		IIO_G_TO_M_S_2(340)
#define ST_ACCEL_4_BDU_ADDR			0x21
#define ST_ACCEL_4_BDU_MASK			0x40
#define ST_ACCEL_4_DRDY_IRQ_ADDR		0x21
#define ST_ACCEL_4_DRDY_IRQ_INT1_MASK		0x04
#define ST_ACCEL_4_MULTIREAD_BIT		true

static const struct iio_chan_spec st_accel_12bit_channels[] = {
	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 12, 16,
			ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 12, 16,
			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 12, 16,
			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
	IIO_CHAN_SOFT_TIMESTAMP(3)
};

static const struct iio_chan_spec st_accel_12bit_channels_with_events[] = {
	ST_SENSORS_LSM_CHANNELS_WITH_EVENTS(IIO_ACCEL,
						ST_SENSORS_SCAN_X,
						IIO_MOD_X, IIO_LE,
						12,
						ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
	ST_SENSORS_LSM_CHANNELS_WITH_EVENTS(IIO_ACCEL,
						ST_SENSORS_SCAN_Y,
						IIO_MOD_Y,
						IIO_LE,
						12,
						ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
	ST_SENSORS_LSM_CHANNELS_WITH_EVENTS(IIO_ACCEL,
						ST_SENSORS_SCAN_Z,
						IIO_MOD_Z,
						IIO_LE,
						12,
						ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
	IIO_CHAN_SOFT_TIMESTAMP(3)
};

static const struct iio_chan_spec st_accel_16bit_channels[] = {
	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
			ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
	IIO_CHAN_SOFT_TIMESTAMP(3)
};

static const struct st_sensor_settings st_accel_sensors_settings[] = {
	{
		.wai = ST_ACCEL_1_WAI_EXP,
		.sensors_supported = {
			[0] = LIS3DH_ACCEL_DEV_NAME,
			[1] = LSM303DLHC_ACCEL_DEV_NAME,
			[2] = LSM330D_ACCEL_DEV_NAME,
			[3] = LSM330DL_ACCEL_DEV_NAME,
			[4] = LSM330DLC_ACCEL_DEV_NAME,
			[5] = LIS2DH12_ACCEL_DEV_NAME,
		},
		.ch = (struct iio_chan_spec *)
			st_accel_12bit_channels_with_events,
		.odr = {
			.addr = ST_ACCEL_1_ODR_ADDR,
			.mask = ST_ACCEL_1_ODR_MASK,
			.odr_avl = {
				{ 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
				{ 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
				{ 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
				{ 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
				{ 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
				{ 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
				{ 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
				{ 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
			},
		},
		.pw = {
			.addr = ST_ACCEL_1_ODR_ADDR,
			.mask = ST_ACCEL_1_ODR_MASK,
			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
		},
		.enable_axis = {
			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
		},
		.fs = {
			.addr = ST_ACCEL_1_FS_ADDR,
			.mask = ST_ACCEL_1_FS_MASK,
			.fs_avl = {
				[0] = {
					.num = ST_ACCEL_FS_AVL_2G,
					.value = ST_ACCEL_1_FS_AVL_2_VAL,
					.gain = ST_ACCEL_1_FS_AVL_2_GAIN,
				},
				[1] = {
					.num = ST_ACCEL_FS_AVL_4G,
					.value = ST_ACCEL_1_FS_AVL_4_VAL,
					.gain = ST_ACCEL_1_FS_AVL_4_GAIN,
				},
				[2] = {
					.num = ST_ACCEL_FS_AVL_8G,
					.value = ST_ACCEL_1_FS_AVL_8_VAL,
					.gain = ST_ACCEL_1_FS_AVL_8_GAIN,
				},
				[3] = {
					.num = ST_ACCEL_FS_AVL_16G,
					.value = ST_ACCEL_1_FS_AVL_16_VAL,
					.gain = ST_ACCEL_1_FS_AVL_16_GAIN,
				},
			},
		},
		.bdu = {
			.addr = ST_ACCEL_1_BDU_ADDR,
			.mask = ST_ACCEL_1_BDU_MASK,
		},
		.drdy_irq = {
			.addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
			.mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK,
			.mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK,
			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
		},
		.hp_filter_mode = {
			.addr = ST_ACCEL_1_HP_FILTER_ADDR,
			.hpis1_mask = ST_ACCEL_1_HP_FILTER_HPIS1_MASK,
			.fds_mask = ST_ACCEL_1_HP_FILTER_FDS_MASK,
		},
		.aoi1_irq = {
			.addr = ST_ACCEL_1_AOI1_IRQ_ADDR,
			.mask = ST_ACCEL_1_AOI1_IRQ_MASK,
		},
		.ref_data = {
			.addr = ST_ACCEL_1_REF_DATA_CAPTURE_ADDR,
			.mask = ST_ACCEL_1_REF_DATA_CAPTURE_MASK,
		},
		.int1_cfg = {
			.addr = ST_ACCEL_1_INT1_CFG_ADDR,
			.mask = ST_ACCEL_1_INT1_CFG_MASK,
			.l_shift[ST_SENSORS_SCAN_X] = ST_ACCEL_INT1_XL_ON_SHIFT,
			.l_shift[ST_SENSORS_SCAN_Y] = ST_ACCEL_INT1_YL_ON_SHIFT,
			.l_shift[ST_SENSORS_SCAN_Z] = ST_ACCEL_INT1_ZL_ON_SHIFT,
			.h_shift[ST_SENSORS_SCAN_X] = ST_ACCEL_INT1_XH_ON_SHIFT,
			.h_shift[ST_SENSORS_SCAN_Y] = ST_ACCEL_INT1_YH_ON_SHIFT,
			.h_shift[ST_SENSORS_SCAN_Z] = ST_ACCEL_INT1_ZH_ON_SHIFT,
			.value_off = ST_ACCEL_INT1_OR_XH_YH_ZH_VALUE_OFF,
		},
		.int1_src = {
			.addr = ST_ACCEL_1_INT1_SRC_ADDR,
			.mask = ST_ACCEL_1_INT1_SRC_MASK,
		},
		.lir1 = {
			.addr = ST_ACCEL_1_LIR1_CFG_ADDR,
			.mask = ST_ACCEL_1_LIR1_CFG_MASK,
		},
		.ths = {
			.addr = ST_ACCEL_1_THS_ADDR,
			.mask = ST_ACCEL_1_THS_MASK,
		},
		.dur = {
			.addr = ST_ACCEL_1_DUR_ADDR,
			.mask = ST_ACCEL_1_DUR_MASK,
		},
		.multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
		.bootime = 2,
	},
	{
		.wai = ST_ACCEL_2_WAI_EXP,
		.sensors_supported = {
			[0] = LIS331DLH_ACCEL_DEV_NAME,
			[1] = LSM303DL_ACCEL_DEV_NAME,
			[2] = LSM303DLH_ACCEL_DEV_NAME,
			[3] = LSM303DLM_ACCEL_DEV_NAME,
		},
		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
		.odr = {
			.addr = ST_ACCEL_2_ODR_ADDR,
			.mask = ST_ACCEL_2_ODR_MASK,
			.odr_avl = {
				{ 50, ST_ACCEL_2_ODR_AVL_50HZ_VAL, },
				{ 100, ST_ACCEL_2_ODR_AVL_100HZ_VAL, },
				{ 400, ST_ACCEL_2_ODR_AVL_400HZ_VAL, },
				{ 1000, ST_ACCEL_2_ODR_AVL_1000HZ_VAL, },
			},
		},
		.pw = {
			.addr = ST_ACCEL_2_PW_ADDR,
			.mask = ST_ACCEL_2_PW_MASK,
			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
		},
		.enable_axis = {
			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
		},
		.fs = {
			.addr = ST_ACCEL_2_FS_ADDR,
			.mask = ST_ACCEL_2_FS_MASK,
			.fs_avl = {
				[0] = {
					.num = ST_ACCEL_FS_AVL_2G,
					.value = ST_ACCEL_2_FS_AVL_2_VAL,
					.gain = ST_ACCEL_2_FS_AVL_2_GAIN,
				},
				[1] = {
					.num = ST_ACCEL_FS_AVL_4G,
					.value = ST_ACCEL_2_FS_AVL_4_VAL,
					.gain = ST_ACCEL_2_FS_AVL_4_GAIN,
				},
				[2] = {
					.num = ST_ACCEL_FS_AVL_8G,
					.value = ST_ACCEL_2_FS_AVL_8_VAL,
					.gain = ST_ACCEL_2_FS_AVL_8_GAIN,
				},
			},
		},
		.bdu = {
			.addr = ST_ACCEL_2_BDU_ADDR,
			.mask = ST_ACCEL_2_BDU_MASK,
		},
		.drdy_irq = {
			.addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
			.mask_int1 = ST_ACCEL_2_DRDY_IRQ_INT1_MASK,
			.mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK,
			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
		},
		.multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
		.bootime = 2,
	},
	{
		.wai = ST_ACCEL_3_WAI_EXP,
		.sensors_supported = {
			[0] = LSM330_ACCEL_DEV_NAME,
		},
		.ch = (struct iio_chan_spec *)st_accel_16bit_channels,
		.odr = {
			.addr = ST_ACCEL_3_ODR_ADDR,
			.mask = ST_ACCEL_3_ODR_MASK,
			.odr_avl = {
				{ 3, ST_ACCEL_3_ODR_AVL_3HZ_VAL },
				{ 6, ST_ACCEL_3_ODR_AVL_6HZ_VAL, },
				{ 12, ST_ACCEL_3_ODR_AVL_12HZ_VAL, },
				{ 25, ST_ACCEL_3_ODR_AVL_25HZ_VAL, },
				{ 50, ST_ACCEL_3_ODR_AVL_50HZ_VAL, },
				{ 100, ST_ACCEL_3_ODR_AVL_100HZ_VAL, },
				{ 200, ST_ACCEL_3_ODR_AVL_200HZ_VAL, },
				{ 400, ST_ACCEL_3_ODR_AVL_400HZ_VAL, },
				{ 800, ST_ACCEL_3_ODR_AVL_800HZ_VAL, },
				{ 1600, ST_ACCEL_3_ODR_AVL_1600HZ_VAL, },
			},
		},
		.pw = {
			.addr = ST_ACCEL_3_ODR_ADDR,
			.mask = ST_ACCEL_3_ODR_MASK,
			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
		},
		.enable_axis = {
			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
		},
		.fs = {
			.addr = ST_ACCEL_3_FS_ADDR,
			.mask = ST_ACCEL_3_FS_MASK,
			.fs_avl = {
				[0] = {
					.num = ST_ACCEL_FS_AVL_2G,
					.value = ST_ACCEL_3_FS_AVL_2_VAL,
					.gain = ST_ACCEL_3_FS_AVL_2_GAIN,
				},
				[1] = {
					.num = ST_ACCEL_FS_AVL_4G,
					.value = ST_ACCEL_3_FS_AVL_4_VAL,
					.gain = ST_ACCEL_3_FS_AVL_4_GAIN,
				},
				[2] = {
					.num = ST_ACCEL_FS_AVL_6G,
					.value = ST_ACCEL_3_FS_AVL_6_VAL,
					.gain = ST_ACCEL_3_FS_AVL_6_GAIN,
				},
				[3] = {
					.num = ST_ACCEL_FS_AVL_8G,
					.value = ST_ACCEL_3_FS_AVL_8_VAL,
					.gain = ST_ACCEL_3_FS_AVL_8_GAIN,
				},
				[4] = {
					.num = ST_ACCEL_FS_AVL_16G,
					.value = ST_ACCEL_3_FS_AVL_16_VAL,
					.gain = ST_ACCEL_3_FS_AVL_16_GAIN,
				},
			},
		},
		.bdu = {
			.addr = ST_ACCEL_3_BDU_ADDR,
			.mask = ST_ACCEL_3_BDU_MASK,
		},
		.drdy_irq = {
			.addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
			.mask_int1 = ST_ACCEL_3_DRDY_IRQ_INT1_MASK,
			.mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK,
			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
			.ig1 = {
				.en_addr = ST_ACCEL_3_IG1_EN_ADDR,
				.en_mask = ST_ACCEL_3_IG1_EN_MASK,
			},
		},
		.multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT,
		.bootime = 2,
	},
	{
		.wai = ST_ACCEL_4_WAI_EXP,
		.sensors_supported = {
			[0] = LIS3LV02DL_ACCEL_DEV_NAME,
		},
		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
		.odr = {
			.addr = ST_ACCEL_4_ODR_ADDR,
			.mask = ST_ACCEL_4_ODR_MASK,
			.odr_avl = {
				{ 40, ST_ACCEL_4_ODR_AVL_40HZ_VAL },
				{ 160, ST_ACCEL_4_ODR_AVL_160HZ_VAL, },
				{ 640, ST_ACCEL_4_ODR_AVL_640HZ_VAL, },
				{ 2560, ST_ACCEL_4_ODR_AVL_2560HZ_VAL, },
			},
		},
		.pw = {
			.addr = ST_ACCEL_4_PW_ADDR,
			.mask = ST_ACCEL_4_PW_MASK,
			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
		},
		.enable_axis = {
			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
		},
		.fs = {
			.addr = ST_ACCEL_4_FS_ADDR,
			.mask = ST_ACCEL_4_FS_MASK,
			.fs_avl = {
				[0] = {
					.num = ST_ACCEL_FS_AVL_2G,
					.value = ST_ACCEL_4_FS_AVL_2_VAL,
					.gain = ST_ACCEL_4_FS_AVL_2_GAIN,
				},
				[1] = {
					.num = ST_ACCEL_FS_AVL_6G,
					.value = ST_ACCEL_4_FS_AVL_6_VAL,
					.gain = ST_ACCEL_4_FS_AVL_6_GAIN,
				},
			},
		},
		.bdu = {
			.addr = ST_ACCEL_4_BDU_ADDR,
			.mask = ST_ACCEL_4_BDU_MASK,
		},
		.drdy_irq = {
			.addr = ST_ACCEL_4_DRDY_IRQ_ADDR,
			.mask_int1 = ST_ACCEL_4_DRDY_IRQ_INT1_MASK,
			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
		},
		.multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT,
		.bootime = 2, /* guess */
	},
};

static int st_accel_read_raw(struct iio_dev *indio_dev,
			struct iio_chan_spec const *ch, int *val,
							int *val2, long mask)
{
	int err;
	struct st_sensor_data *adata = iio_priv(indio_dev);

	switch (mask) {
	case IIO_CHAN_INFO_RAW:
		err = st_sensors_read_info_raw(indio_dev, ch, val);
		if (err < 0)
			goto read_error;

		return IIO_VAL_INT;
	case IIO_CHAN_INFO_SCALE:
		*val = 0;
		*val2 = adata->current_fullscale->gain;
		return IIO_VAL_INT_PLUS_MICRO;
	case IIO_CHAN_INFO_SAMP_FREQ:
		*val = adata->odr;
		return IIO_VAL_INT;
	default:
		return -EINVAL;
	}

read_error:
	return err;
}

static int st_accel_write_raw(struct iio_dev *indio_dev,
		struct iio_chan_spec const *chan, int val, int val2, long mask)
{
	int err;

	switch (mask) {
	case IIO_CHAN_INFO_SCALE:
		err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
		break;
	case IIO_CHAN_INFO_SAMP_FREQ:
		if (val2)
			return -EINVAL;
		mutex_lock(&indio_dev->mlock);
		err = st_sensors_set_odr(indio_dev, val);
		mutex_unlock(&indio_dev->mlock);
		return err;
	default:
		return -EINVAL;
	}

	return err;
}

static int st_accel_read_event(struct iio_dev *indio_dev,
				   const struct iio_chan_spec *chan,
				   enum iio_event_type type,
				   enum iio_event_direction dir,
				   enum iio_event_info info,
				   int *val, int *val2)
{
	struct st_sensor_data *data = iio_priv(indio_dev);

	*val2 = 0;
	switch (info) {
	case IIO_EV_INFO_VALUE:
		*val = data->int_thres & (data->sensor_settings->ths.mask);
		break;
	case IIO_EV_INFO_PERIOD:
		*val = data->int_dur & (data->sensor_settings->dur.mask);
		break;
	default:
		return -EINVAL;
	}

	return IIO_VAL_INT;
}

static int st_accel_write_event(struct iio_dev *indio_dev,
					const struct iio_chan_spec *chan,
					enum iio_event_type type,
					enum iio_event_direction dir,
					enum iio_event_info info,
					int val, int val2)
{
	struct st_sensor_data *data = iio_priv(indio_dev);

	if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED)
		return -EBUSY;

	switch (info) {
	case IIO_EV_INFO_VALUE:
		data->int_thres &= ~(data->sensor_settings->ths.mask);
		data->int_thres |= val & (data->sensor_settings->ths.mask);
		break;
	case IIO_EV_INFO_PERIOD:
		data->int_dur &= ~(data->sensor_settings->dur.mask);
		data->int_dur |= val & (data->sensor_settings->dur.mask);
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static int st_accel_read_event_config(struct iio_dev *indio_dev,
				      const struct iio_chan_spec *chan,
				      enum iio_event_type type,
				      enum iio_event_direction dir)
{
	struct st_sensor_data *data = iio_priv(indio_dev);

	return (dir == IIO_EV_DIR_RISING) ?
		(int)data->ev_h_enable_state[chan->scan_index] :
		(int)data->ev_l_enable_state[chan->scan_index];
}

static int st_accel_write_event_config(struct iio_dev *indio_dev,
				       const struct iio_chan_spec *chan,
				       enum iio_event_type type,
				       enum iio_event_direction dir,
				       int state)
{
	struct st_sensor_data *data = iio_priv(indio_dev);

	if (dir == IIO_EV_DIR_RISING)
		data->ev_h_enable_state[chan->scan_index] = state;
	else if (dir == IIO_EV_DIR_FALLING)
		data->ev_l_enable_state[chan->scan_index] = state;
	else
		return -EINVAL;

	return 0;
}

static ST_SENSOR_DEV_ATTR_SAMP_FREQ();
static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_accel_scale_available);

static struct attribute *st_accel_attributes[] = {
	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
	&iio_dev_attr_in_accel_scale_available.dev_attr.attr,
	&iio_dev_attr_sampling_frequency.dev_attr.attr,
	NULL,
};

static const struct attribute_group st_accel_attribute_group = {
	.attrs = st_accel_attributes,
};

static const struct iio_info accel_info = {
	.driver_module = THIS_MODULE,
	.attrs = &st_accel_attribute_group,
	.read_raw = &st_accel_read_raw,
	.write_raw = &st_accel_write_raw,
	.read_event_value = &st_accel_read_event,
	.write_event_value = &st_accel_write_event,
	.read_event_config = &st_accel_read_event_config,
	.write_event_config = &st_accel_write_event_config,
};

#ifdef CONFIG_IIO_TRIGGER
static const struct iio_trigger_ops st_accel_trigger_ops = {
	.owner = THIS_MODULE,
	.set_trigger_state = ST_ACCEL_TRIGGER_SET_STATE,
};
#define ST_ACCEL_TRIGGER_OPS (&st_accel_trigger_ops)
#else
#define ST_ACCEL_TRIGGER_OPS NULL
#endif

#ifdef CONFIG_IIO_TRIGGER
static int st_accel_trigger_set_state(struct iio_trigger *trig, bool state)
{
	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
	struct st_sensor_data *data = iio_priv(indio_dev);
	int ret;

	WRITE_ONCE(data->hw_irq_trigger, state);

	if (data->wakeup_trig == trig)
		ret = st_sensors_set_wakeup_irq(indio_dev, state);
	else
		ret = st_sensors_set_dataready_irq(indio_dev, state);
	if (ret < 0)
		return ret;

	if (data->wakeup_trig == trig)
		data->wakeup_trig_on = state;

	return ret;
}

static int st_accel_trigger_try_reen(struct iio_trigger *trig)
{
	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
	struct st_sensor_data *data = iio_priv(indio_dev);
	int ret;

	/* Only wakeup interrupts need ack (not drdy interrupt) */
	if (!data->wakeup_trig_on)
		return 0;

	/* clear any latched interrupts */
	ret = st_sensors_reset_latched_int(indio_dev);
	if (ret < 0)
		return ret;

	return 0;
}

static const struct iio_trigger_ops st_accel_trigger_ops_multi = {
	.owner = THIS_MODULE,
	.set_trigger_state = st_accel_trigger_set_state,
	.try_reenable = st_accel_trigger_try_reen,
};

static irqreturn_t st_accel_trig_handler(int irq, void *private)
{
	struct iio_dev *indio_dev = private;
	struct st_sensor_data *data = iio_priv(indio_dev);
	u8 status = 1;
	int ret = 0;

	data->tf->read_byte(&data->tb, data->dev,
		data->sensor_settings->drdy_irq.addr_stat_drdy, &status);
	if (status) { /* If read fails, poll anyway */
		while (ret == 0 && READ_ONCE(data->hw_irq_trigger) && status) {
			if (data->wakeup_trig_on) {
				iio_trigger_poll_chained(data->wakeup_trig);
				st_sensors_reset_latched_int(indio_dev);
			} else {
				iio_trigger_poll_chained(data->trig);
			}
			ret = data->tf->read_byte(&data->tb, data->dev,
				data->sensor_settings->drdy_irq.addr_stat_drdy, &status);
		}
		return IRQ_HANDLED;
	} else {
		return IRQ_NONE;
	}
}

static int st_accel_allocate_multi_trigger(struct iio_dev *indio_dev)
{
	int err;
	struct st_sensor_data *adata = iio_priv(indio_dev);

	err = request_threaded_irq(adata->get_irq_data_ready(indio_dev),
				   NULL,
				   st_accel_trig_handler,
				   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
				   ST_ACCEL_IRQ_NAME,
				   indio_dev);
	if (err)
		goto st_accel_err_irq;

	adata->trig = iio_trigger_alloc("%s-trigger", indio_dev->name);
	if (!adata->trig) {
		err = -ENOMEM;
		goto st_accel_err_drdy_trig;
	}

	adata->wakeup_trig = iio_trigger_alloc("%s-wakeup-trigger",
					       indio_dev->name);
	if (!adata->wakeup_trig) {
		err = -ENOMEM;
		goto st_accel_err_wakeup_trig;
	}

	adata->trig->dev.parent = adata->dev;
	adata->trig->ops = &st_accel_trigger_ops_multi;
	iio_trigger_set_drvdata(adata->trig, indio_dev);
	err = iio_trigger_register(adata->trig);
	if (err)
		goto st_accel_err_drdy_trig_reg;

	adata->wakeup_trig->dev.parent = adata->dev;
	adata->wakeup_trig->ops = &st_accel_trigger_ops_multi;
	iio_trigger_set_drvdata(adata->wakeup_trig, indio_dev);
	err = iio_trigger_register(adata->wakeup_trig);
	if (err)
		goto st_accel_err_wakeup_trig_reg;

	return 0;

st_accel_err_wakeup_trig_reg:
	iio_trigger_unregister(adata->trig);
st_accel_err_drdy_trig_reg:
	iio_trigger_free(adata->wakeup_trig);
st_accel_err_wakeup_trig:
	iio_trigger_free(adata->trig);
st_accel_err_drdy_trig:
	free_irq(adata->get_irq_data_ready(indio_dev), indio_dev);
st_accel_err_irq:
	return err;
}

static void st_sensors_deallocate_multi_trigger(struct iio_dev *indio_dev)
{
	struct st_sensor_data *adata = iio_priv(indio_dev);

	iio_trigger_unregister(adata->wakeup_trig);
	iio_trigger_unregister(adata->trig);
	iio_trigger_free(adata->wakeup_trig);
	iio_trigger_free(adata->trig);
	free_irq(adata->get_irq_data_ready(indio_dev), indio_dev);
}

#else /* CONFIG_IIO_TRIGGER */

static int st_accel_allocate_multi_trigger(struct iio_dev *indio_dev)
{
	return 0;
}

static void st_sensors_deallocate_multi_trigger(struct iio_dev *indio_dev) { }

#endif /* CONFIG_IIO_TRIGGER */

int st_accel_common_probe(struct iio_dev *indio_dev)
{
	struct st_sensor_data *adata = iio_priv(indio_dev);
	int irq = adata->get_irq_data_ready(indio_dev);
	int err;

	indio_dev->modes = INDIO_DIRECT_MODE;
	indio_dev->info = &accel_info;
	mutex_init(&adata->tb.buf_lock);

	st_sensors_power_enable(indio_dev);

	err = st_sensors_check_device_support(indio_dev,
					ARRAY_SIZE(st_accel_sensors_settings),
					st_accel_sensors_settings);
	if (err < 0)
		return err;

	adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
	adata->multiread_bit = adata->sensor_settings->multi_read_bit;
	indio_dev->channels = adata->sensor_settings->ch;
	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;

	adata->current_fullscale = (struct st_sensor_fullscale_avl *)
					&adata->sensor_settings->fs.fs_avl[0];
	adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;

	if (!adata->dev->platform_data)
		adata->dev->platform_data =
			(struct st_sensors_platform_data *)&default_accel_pdata;

	err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
	if (err < 0)
		return err;

	err = st_accel_allocate_ring(indio_dev);
	if (err < 0)
		return err;

	if (irq > 0) {
		if (adata->sensor_settings->wai == ST_ACCEL_1_WAI_EXP)
			err = st_accel_allocate_multi_trigger(indio_dev);
		else
			err = st_sensors_allocate_trigger(indio_dev,
							  ST_ACCEL_TRIGGER_OPS);
		if (err < 0)
			goto st_accel_probe_trigger_error;
	}

	err = iio_device_register(indio_dev);
	if (err)
		goto st_accel_device_register_error;

	dev_info(&indio_dev->dev, "registered accelerometer %s\n",
		 indio_dev->name);

	return 0;

st_accel_device_register_error:
	if (irq > 0) {
		if (adata->sensor_settings->wai == ST_ACCEL_1_WAI_EXP)
			st_sensors_deallocate_multi_trigger(indio_dev);
		else
			st_sensors_deallocate_trigger(indio_dev);
	}

st_accel_probe_trigger_error:
	st_accel_deallocate_ring(indio_dev);

	return err;
}
EXPORT_SYMBOL(st_accel_common_probe);

void st_accel_common_remove(struct iio_dev *indio_dev)
{
	struct st_sensor_data *adata = iio_priv(indio_dev);

	st_sensors_power_disable(indio_dev);

	iio_device_unregister(indio_dev);
	if (adata->get_irq_data_ready(indio_dev) > 0) {
		if (adata->sensor_settings->wai == ST_ACCEL_1_WAI_EXP)
			st_sensors_deallocate_multi_trigger(indio_dev);
		else
			st_sensors_deallocate_trigger(indio_dev);
	}

	st_accel_deallocate_ring(indio_dev);
}
EXPORT_SYMBOL(st_accel_common_remove);

MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
MODULE_DESCRIPTION("STMicroelectronics accelerometers driver");
MODULE_LICENSE("GPL v2");