| # |
| # ADC drivers |
| # |
| menu "Analog to digital converters" |
| |
| config AD7606 |
| tristate "Analog Devices AD7606 ADC driver" |
| depends on GPIOLIB |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say yes here to build support for Analog Devices: |
| ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC). |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ad7606. |
| |
| config AD7606_IFACE_PARALLEL |
| tristate "parallel interface support" |
| depends on AD7606 |
| help |
| Say yes here to include parallel interface support on the AD7606 |
| ADC driver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ad7606_iface_parallel. |
| |
| config AD7606_IFACE_SPI |
| tristate "spi interface support" |
| depends on AD7606 |
| depends on SPI |
| help |
| Say yes here to include parallel interface support on the AD7606 |
| ADC driver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ad7606_iface_spi. |
| |
| config AD7780 |
| tristate "Analog Devices AD7780 and similar ADCs driver" |
| depends on SPI |
| depends on GPIOLIB |
| select AD_SIGMA_DELTA |
| help |
| Say yes here to build support for Analog Devices AD7170, AD7171, |
| AD7780 and AD7781 SPI analog to digital converters (ADC). |
| If unsure, say N (but it's safe to say "Y"). |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ad7780. |
| |
| config AD7816 |
| tristate "Analog Devices AD7816/7/8 temperature sensor and ADC driver" |
| depends on SPI |
| depends on GPIOLIB |
| help |
| Say yes here to build support for Analog Devices AD7816/7/8 |
| temperature sensors and ADC. |
| |
| config AD7192 |
| tristate "Analog Devices AD7190 AD7192 AD7195 ADC driver" |
| depends on SPI |
| select AD_SIGMA_DELTA |
| help |
| Say yes here to build support for Analog Devices AD7190, |
| AD7192 or AD7195 SPI analog to digital converters (ADC). |
| If unsure, say N (but it's safe to say "Y"). |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ad7192. |
| |
| config AD7280 |
| tristate "Analog Devices AD7280A Lithium Ion Battery Monitoring System" |
| depends on SPI |
| help |
| Say yes here to build support for Analog Devices AD7280A |
| Lithium Ion Battery Monitoring System. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ad7280a |
| |
| config LPC32XX_ADC |
| tristate "NXP LPC32XX ADC" |
| depends on ARCH_LPC32XX || COMPILE_TEST |
| depends on HAS_IOMEM |
| help |
| Say yes here to build support for the integrated ADC inside the |
| LPC32XX SoC. Note that this feature uses the same hardware as the |
| touchscreen driver, so you should either select only one of the two |
| drivers (lpc32xx_adc or lpc32xx_ts) or, in the OpenFirmware case, |
| activate only one via device tree selection. Provides direct access |
| via sysfs. |
| |
| config MXS_LRADC |
| tristate "Freescale i.MX23/i.MX28 LRADC" |
| depends on (ARCH_MXS || COMPILE_TEST) && HAS_IOMEM |
| depends on INPUT |
| select STMP_DEVICE |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say yes here to build support for i.MX23/i.MX28 LRADC convertor |
| built into these chips. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mxs-lradc. |
| |
| config SPEAR_ADC |
| tristate "ST SPEAr ADC" |
| depends on PLAT_SPEAR || COMPILE_TEST |
| depends on HAS_IOMEM |
| help |
| Say yes here to build support for the integrated ADC inside the |
| ST SPEAr SoC. Provides direct access via sysfs. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called spear_adc. |
| endmenu |
