blob: 5c8f4effb62ac2ef09ae65e9fcddb707ff9d473c [file] [log] [blame]
/*
* bdc_core.c - BRCM BDC USB3.0 device controller core operations
*
* Copyright (C) 2014 Broadcom Corporation
*
* Author: Ashwini Pahuja
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/list.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
#include <linux/of.h>
#include <linux/moduleparam.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include "bdc.h"
#include "bdc_dbg.h"
/* Poll till controller status is not OIP */
static int poll_oip(struct bdc *bdc, int usec)
{
u32 status;
/* Poll till STS!= OIP */
while (usec) {
status = bdc_readl(bdc->regs, BDC_BDCSC);
if (BDC_CSTS(status) != BDC_OIP) {
dev_dbg(bdc->dev,
"poll_oip complete status=%d",
BDC_CSTS(status));
return 0;
}
udelay(10);
usec -= 10;
}
dev_err(bdc->dev, "Err: operation timedout BDCSC: 0x%08x\n", status);
return -ETIMEDOUT;
}
/* Stop the BDC controller */
int bdc_stop(struct bdc *bdc)
{
int ret;
u32 temp;
dev_dbg(bdc->dev, "%s ()\n\n", __func__);
temp = bdc_readl(bdc->regs, BDC_BDCSC);
/* Check if BDC is already halted */
if (BDC_CSTS(temp) == BDC_HLT) {
dev_vdbg(bdc->dev, "BDC already halted\n");
return 0;
}
temp &= ~BDC_COP_MASK;
temp |= BDC_COS|BDC_COP_STP;
bdc_writel(bdc->regs, BDC_BDCSC, temp);
ret = poll_oip(bdc, BDC_COP_TIMEOUT);
if (ret)
dev_err(bdc->dev, "bdc stop operation failed");
return ret;
}
/* Issue a reset to BDC controller */
int bdc_reset(struct bdc *bdc)
{
u32 temp;
int ret;
dev_dbg(bdc->dev, "%s ()\n", __func__);
/* First halt the controller */
ret = bdc_stop(bdc);
if (ret)
return ret;
temp = bdc_readl(bdc->regs, BDC_BDCSC);
temp &= ~BDC_COP_MASK;
temp |= BDC_COS|BDC_COP_RST;
bdc_writel(bdc->regs, BDC_BDCSC, temp);
ret = poll_oip(bdc, BDC_COP_TIMEOUT);
if (ret)
dev_err(bdc->dev, "bdc reset operation failed");
return ret;
}
/* Run the BDC controller */
int bdc_run(struct bdc *bdc)
{
u32 temp;
int ret;
dev_dbg(bdc->dev, "%s ()\n", __func__);
temp = bdc_readl(bdc->regs, BDC_BDCSC);
/* if BDC is already in running state then do not do anything */
if (BDC_CSTS(temp) == BDC_NOR) {
dev_warn(bdc->dev, "bdc is already in running state\n");
return 0;
}
temp &= ~BDC_COP_MASK;
temp |= BDC_COP_RUN;
temp |= BDC_COS;
bdc_writel(bdc->regs, BDC_BDCSC, temp);
ret = poll_oip(bdc, BDC_COP_TIMEOUT);
if (ret) {
dev_err(bdc->dev, "bdc run operation failed:%d", ret);
return ret;
}
temp = bdc_readl(bdc->regs, BDC_BDCSC);
if (BDC_CSTS(temp) != BDC_NOR) {
dev_err(bdc->dev, "bdc not in normal mode after RUN op :%d\n",
BDC_CSTS(temp));
return -ESHUTDOWN;
}
return 0;
}
/*
* Present the termination to the host, typically called from upstream port
* event with Vbus present =1
*/
void bdc_softconn(struct bdc *bdc)
{
u32 uspc;
uspc = bdc_readl(bdc->regs, BDC_USPC);
uspc &= ~BDC_PST_MASK;
uspc |= BDC_LINK_STATE_RX_DET;
uspc |= BDC_SWS;
dev_dbg(bdc->dev, "%s () uspc=%08x\n", __func__, uspc);
bdc_writel(bdc->regs, BDC_USPC, uspc);
}
/* Remove the termination */
void bdc_softdisconn(struct bdc *bdc)
{
u32 uspc;
uspc = bdc_readl(bdc->regs, BDC_USPC);
uspc |= BDC_SDC;
uspc &= ~BDC_SCN;
dev_dbg(bdc->dev, "%s () uspc=%x\n", __func__, uspc);
bdc_writel(bdc->regs, BDC_USPC, uspc);
}
/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */
static int scratchpad_setup(struct bdc *bdc)
{
int sp_buff_size;
u32 low32;
u32 upp32;
sp_buff_size = BDC_SPB(bdc_readl(bdc->regs, BDC_BDCCFG0));
dev_dbg(bdc->dev, "%s() sp_buff_size=%d\n", __func__, sp_buff_size);
if (!sp_buff_size) {
dev_dbg(bdc->dev, "Scratchpad buffer not needed\n");
return 0;
}
/* Refer to BDC spec, Table 4 for description of SPB */
sp_buff_size = 1 << (sp_buff_size + 5);
dev_dbg(bdc->dev, "Allocating %d bytes for scratchpad\n", sp_buff_size);
bdc->scratchpad.buff = dma_zalloc_coherent(bdc->dev, sp_buff_size,
&bdc->scratchpad.sp_dma, GFP_KERNEL);
if (!bdc->scratchpad.buff)
goto fail;
bdc->sp_buff_size = sp_buff_size;
bdc->scratchpad.size = sp_buff_size;
low32 = lower_32_bits(bdc->scratchpad.sp_dma);
upp32 = upper_32_bits(bdc->scratchpad.sp_dma);
cpu_to_le32s(&low32);
cpu_to_le32s(&upp32);
bdc_writel(bdc->regs, BDC_SPBBAL, low32);
bdc_writel(bdc->regs, BDC_SPBBAH, upp32);
return 0;
fail:
bdc->scratchpad.buff = NULL;
return -ENOMEM;
}
/* Allocate the status report ring */
static int setup_srr(struct bdc *bdc, int interrupter)
{
dev_dbg(bdc->dev, "%s() NUM_SR_ENTRIES:%d\n", __func__, NUM_SR_ENTRIES);
/* Reset the SRR */
bdc_writel(bdc->regs, BDC_SRRINT(0), BDC_SRR_RWS | BDC_SRR_RST);
bdc->srr.dqp_index = 0;
/* allocate the status report descriptors */
bdc->srr.sr_bds = dma_zalloc_coherent(
bdc->dev,
NUM_SR_ENTRIES * sizeof(struct bdc_bd),
&bdc->srr.dma_addr,
GFP_KERNEL);
if (!bdc->srr.sr_bds)
return -ENOMEM;
return 0;
}
/* Initialize the HW regs and internal data structures */
static void bdc_mem_init(struct bdc *bdc, bool reinit)
{
u8 size = 0;
u32 usb2_pm;
u32 low32;
u32 upp32;
u32 temp;
dev_dbg(bdc->dev, "%s ()\n", __func__);
bdc->ep0_state = WAIT_FOR_SETUP;
bdc->dev_addr = 0;
bdc->srr.eqp_index = 0;
bdc->srr.dqp_index = 0;
bdc->zlp_needed = false;
bdc->delayed_status = false;
bdc_writel(bdc->regs, BDC_SPBBAL, bdc->scratchpad.sp_dma);
/* Init the SRR */
temp = BDC_SRR_RWS | BDC_SRR_RST;
/* Reset the SRR */
bdc_writel(bdc->regs, BDC_SRRINT(0), temp);
dev_dbg(bdc->dev, "bdc->srr.sr_bds =%p\n", bdc->srr.sr_bds);
temp = lower_32_bits(bdc->srr.dma_addr);
size = fls(NUM_SR_ENTRIES) - 2;
temp |= size;
dev_dbg(bdc->dev, "SRRBAL[0]=%08x NUM_SR_ENTRIES:%d size:%d\n",
temp, NUM_SR_ENTRIES, size);
low32 = lower_32_bits(temp);
upp32 = upper_32_bits(bdc->srr.dma_addr);
cpu_to_le32s(&low32);
cpu_to_le32s(&upp32);
/* Write the dma addresses into regs*/
bdc_writel(bdc->regs, BDC_SRRBAL(0), low32);
bdc_writel(bdc->regs, BDC_SRRBAH(0), upp32);
temp = bdc_readl(bdc->regs, BDC_SRRINT(0));
temp |= BDC_SRR_IE;
temp &= ~(BDC_SRR_RST | BDC_SRR_RWS);
bdc_writel(bdc->regs, BDC_SRRINT(0), temp);
/* Set the Interrupt Coalescence ~500 usec */
temp = bdc_readl(bdc->regs, BDC_INTCTLS(0));
temp &= ~0xffff;
temp |= INT_CLS;
bdc_writel(bdc->regs, BDC_INTCTLS(0), temp);
usb2_pm = bdc_readl(bdc->regs, BDC_USPPM2);
dev_dbg(bdc->dev, "usb2_pm=%08x", usb2_pm);
/* Enable hardware LPM Enable */
usb2_pm |= BDC_HLE;
bdc_writel(bdc->regs, BDC_USPPM2, usb2_pm);
/* readback for debug */
usb2_pm = bdc_readl(bdc->regs, BDC_USPPM2);
dev_dbg(bdc->dev, "usb2_pm=%08x\n", usb2_pm);
/* Disable any unwanted SR's on SRR */
temp = bdc_readl(bdc->regs, BDC_BDCSC);
/* We don't want Microframe counter wrap SR */
temp |= BDC_MASK_MCW;
bdc_writel(bdc->regs, BDC_BDCSC, temp);
/*
* In some error cases, driver has to reset the entire BDC controller
* in that case reinit is passed as 1
*/
if (reinit) {
/* Enable interrupts */
temp = bdc_readl(bdc->regs, BDC_BDCSC);
temp |= BDC_GIE;
bdc_writel(bdc->regs, BDC_BDCSC, temp);
/* Init scratchpad to 0 */
memset(bdc->scratchpad.buff, 0, bdc->sp_buff_size);
/* Initialize SRR to 0 */
memset(bdc->srr.sr_bds, 0,
NUM_SR_ENTRIES * sizeof(struct bdc_bd));
} else {
/* One time initiaization only */
/* Enable status report function pointers */
bdc->sr_handler[0] = bdc_sr_xsf;
bdc->sr_handler[1] = bdc_sr_uspc;
/* EP0 status report function pointers */
bdc->sr_xsf_ep0[0] = bdc_xsf_ep0_setup_recv;
bdc->sr_xsf_ep0[1] = bdc_xsf_ep0_data_start;
bdc->sr_xsf_ep0[2] = bdc_xsf_ep0_status_start;
}
}
/* Free the dynamic memory */
static void bdc_mem_free(struct bdc *bdc)
{
dev_dbg(bdc->dev, "%s\n", __func__);
/* Free SRR */
if (bdc->srr.sr_bds)
dma_free_coherent(bdc->dev,
NUM_SR_ENTRIES * sizeof(struct bdc_bd),
bdc->srr.sr_bds, bdc->srr.dma_addr);
/* Free scratchpad */
if (bdc->scratchpad.buff)
dma_free_coherent(bdc->dev, bdc->sp_buff_size,
bdc->scratchpad.buff, bdc->scratchpad.sp_dma);
/* Destroy the dma pools */
if (bdc->bd_table_pool)
dma_pool_destroy(bdc->bd_table_pool);
/* Free the bdc_ep array */
kfree(bdc->bdc_ep_array);
bdc->srr.sr_bds = NULL;
bdc->scratchpad.buff = NULL;
bdc->bd_table_pool = NULL;
bdc->bdc_ep_array = NULL;
}
/*
* bdc reinit gives a controller reset and reinitialize the registers,
* called from disconnect/bus reset scenario's, to ensure proper HW cleanup
*/
int bdc_reinit(struct bdc *bdc)
{
int ret;
dev_dbg(bdc->dev, "%s\n", __func__);
ret = bdc_stop(bdc);
if (ret)
goto out;
ret = bdc_reset(bdc);
if (ret)
goto out;
/* the reinit flag is 1 */
bdc_mem_init(bdc, true);
ret = bdc_run(bdc);
out:
bdc->reinit = false;
return ret;
}
/* Allocate all the dyanmic memory */
static int bdc_mem_alloc(struct bdc *bdc)
{
u32 page_size;
unsigned int num_ieps, num_oeps;
dev_dbg(bdc->dev,
"%s() NUM_BDS_PER_TABLE:%d\n", __func__,
NUM_BDS_PER_TABLE);
page_size = BDC_PGS(bdc_readl(bdc->regs, BDC_BDCCFG0));
/* page size is 2^pgs KB */
page_size = 1 << page_size;
/* KB */
page_size <<= 10;
dev_dbg(bdc->dev, "page_size=%d\n", page_size);
/* Create a pool of bd tables */
bdc->bd_table_pool =
dma_pool_create("BDC BD tables", bdc->dev, NUM_BDS_PER_TABLE * 16,
16, page_size);
if (!bdc->bd_table_pool)
goto fail;
if (scratchpad_setup(bdc))
goto fail;
/* read from regs */
num_ieps = NUM_NCS(bdc_readl(bdc->regs, BDC_FSCNIC));
num_oeps = NUM_NCS(bdc_readl(bdc->regs, BDC_FSCNOC));
/* +2: 1 for ep0 and the other is rsvd i.e. bdc_ep[0] is rsvd */
bdc->num_eps = num_ieps + num_oeps + 2;
dev_dbg(bdc->dev,
"ieps:%d eops:%d num_eps:%d\n",
num_ieps, num_oeps, bdc->num_eps);
/* allocate array of ep pointers */
bdc->bdc_ep_array = kcalloc(bdc->num_eps, sizeof(struct bdc_ep *),
GFP_KERNEL);
if (!bdc->bdc_ep_array)
goto fail;
dev_dbg(bdc->dev, "Allocating sr report0\n");
if (setup_srr(bdc, 0))
goto fail;
return 0;
fail:
dev_warn(bdc->dev, "Couldn't initialize memory\n");
bdc_mem_free(bdc);
return -ENOMEM;
}
/* opposite to bdc_hw_init */
static void bdc_hw_exit(struct bdc *bdc)
{
dev_dbg(bdc->dev, "%s ()\n", __func__);
bdc_mem_free(bdc);
}
/* Initialize the bdc HW and memory */
static int bdc_hw_init(struct bdc *bdc)
{
int ret;
dev_dbg(bdc->dev, "%s ()\n", __func__);
ret = bdc_reset(bdc);
if (ret) {
dev_err(bdc->dev, "err resetting bdc abort bdc init%d\n", ret);
return ret;
}
ret = bdc_mem_alloc(bdc);
if (ret) {
dev_err(bdc->dev, "Mem alloc failed, aborting\n");
return -ENOMEM;
}
bdc_mem_init(bdc, 0);
bdc_dbg_regs(bdc);
dev_dbg(bdc->dev, "HW Init done\n");
return 0;
}
static int bdc_probe(struct platform_device *pdev)
{
struct bdc *bdc;
struct resource *res;
int ret = -ENOMEM;
int irq;
u32 temp;
struct device *dev = &pdev->dev;
dev_dbg(dev, "%s()\n", __func__);
bdc = devm_kzalloc(dev, sizeof(*bdc), GFP_KERNEL);
if (!bdc)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
bdc->regs = devm_ioremap_resource(dev, res);
if (IS_ERR(bdc->regs)) {
dev_err(dev, "ioremap error\n");
return -ENOMEM;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "platform_get_irq failed:%d\n", irq);
return irq;
}
spin_lock_init(&bdc->lock);
platform_set_drvdata(pdev, bdc);
bdc->irq = irq;
bdc->dev = dev;
dev_dbg(bdc->dev, "bdc->regs: %p irq=%d\n", bdc->regs, bdc->irq);
temp = bdc_readl(bdc->regs, BDC_BDCSC);
if ((temp & BDC_P64) &&
!dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) {
dev_dbg(bdc->dev, "Using 64-bit address\n");
} else {
ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (ret) {
dev_err(bdc->dev, "No suitable DMA config available, abort\n");
return -ENOTSUPP;
}
dev_dbg(bdc->dev, "Using 32-bit address\n");
}
ret = bdc_hw_init(bdc);
if (ret) {
dev_err(bdc->dev, "BDC init failure:%d\n", ret);
return ret;
}
ret = bdc_udc_init(bdc);
if (ret) {
dev_err(bdc->dev, "BDC Gadget init failure:%d\n", ret);
goto cleanup;
}
return 0;
cleanup:
bdc_hw_exit(bdc);
return ret;
}
static int bdc_remove(struct platform_device *pdev)
{
struct bdc *bdc;
bdc = platform_get_drvdata(pdev);
dev_dbg(bdc->dev, "%s ()\n", __func__);
bdc_udc_exit(bdc);
bdc_hw_exit(bdc);
return 0;
}
static struct platform_driver bdc_driver = {
.driver = {
.name = BRCM_BDC_NAME,
},
.probe = bdc_probe,
.remove = bdc_remove,
};
module_platform_driver(bdc_driver);
MODULE_AUTHOR("Ashwini Pahuja <ashwini.linux@gmail.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(BRCM_BDC_DESC);