| SSM2518 audio amplifier | |
| This device supports I2C only. | |
| Required properties: | |
| - compatible : Must be "adi,ssm2518" | |
| - reg : the I2C address of the device. This will either be 0x34 (ADDR pin low) | |
| or 0x35 (ADDR pin high) | |
| Optional properties: | |
| - gpios : GPIO connected to the nSD pin. If the property is not present it is | |
| assumed that the nSD pin is hardwired to always on. | |
| Example: | |
| ssm2518: ssm2518@34 { | |
| compatible = "adi,ssm2518"; | |
| reg = <0x34>; | |
| gpios = <&gpio 5 0>; | |
| }; |