| /* |
| * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source |
| * |
| * Copyright (c) 2014 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device |
| * tree nodes are listed in this file. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #define PIN_PULL_NONE 0 |
| #define PIN_PULL_DOWN 1 |
| #define PIN_PULL_UP 3 |
| |
| #define PIN_PDN_OUT0 0 |
| #define PIN_PDN_OUT1 1 |
| #define PIN_PDN_INPUT 2 |
| #define PIN_PDN_PREV 3 |
| |
| #define PIN_SLP(_pin, _mode, _pull) \ |
| _pin { \ |
| samsung,pins = #_pin; \ |
| samsung,pin-con-pdn = <PIN_PDN_ ##_mode>; \ |
| samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>; \ |
| } |
| |
| &pinctrl_0 { |
| gpa0: gpa0 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpa1: gpa1 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpb: gpb { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpc0: gpc0 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpc1: gpc1 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpd0: gpd0 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpd1: gpd1 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| uart0_data: uart0-data { |
| samsung,pins = "gpa0-0", "gpa0-1"; |
| samsung,pin-function = <0x2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| uart0_fctl: uart0-fctl { |
| samsung,pins = "gpa0-2", "gpa0-3"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| uart1_data: uart1-data { |
| samsung,pins = "gpa0-4", "gpa0-5"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| uart1_fctl: uart1-fctl { |
| samsung,pins = "gpa0-6", "gpa0-7"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| i2c2_bus: i2c2-bus { |
| samsung,pins = "gpa0-6", "gpa0-7"; |
| samsung,pin-function = <3>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| i2c3_bus: i2c3-bus { |
| samsung,pins = "gpa1-2", "gpa1-3"; |
| samsung,pin-function = <3>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| spi0_bus: spi0-bus { |
| samsung,pins = "gpb-0", "gpb-2", "gpb-3"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| i2c4_bus: i2c4-bus { |
| samsung,pins = "gpb-0", "gpb-1"; |
| samsung,pin-function = <3>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| spi1_bus: spi1-bus { |
| samsung,pins = "gpb-4", "gpb-6", "gpb-7"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| i2c5_bus: i2c5-bus { |
| samsung,pins = "gpb-2", "gpb-3"; |
| samsung,pin-function = <3>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| i2s2_bus: i2s2-bus { |
| samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", |
| "gpc1-4"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| pcm2_bus: pcm2-bus { |
| samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", |
| "gpc1-4"; |
| samsung,pin-function = <3>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| i2c6_bus: i2c6-bus { |
| samsung,pins = "gpc1-3", "gpc1-4"; |
| samsung,pin-function = <4>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| pwm0_out: pwm0-out { |
| samsung,pins = "gpd0-0"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| pwm1_out: pwm1-out { |
| samsung,pins = "gpd0-1"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| i2c7_bus: i2c7-bus { |
| samsung,pins = "gpd0-2", "gpd0-3"; |
| samsung,pin-function = <3>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| pwm2_out: pwm2-out { |
| samsung,pins = "gpd0-2"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| pwm3_out: pwm3-out { |
| samsung,pins = "gpd0-3"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| i2c0_bus: i2c0-bus { |
| samsung,pins = "gpd1-0", "gpd1-1"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| mipi0_clk: mipi0-clk { |
| samsung,pins = "gpd1-0", "gpd1-1"; |
| samsung,pin-function = <3>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| i2c1_bus: i2c1-bus { |
| samsung,pins = "gpd1-2", "gpd1-3"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <0>; |
| }; |
| }; |
| |
| &pinctrl_1 { |
| gpe0: gpe0 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpe1: gpe1 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpe2: gpe2 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpk0: gpk0 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpk1: gpk1 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpk2: gpk2 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpl0: gpl0 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpm0: gpm0 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpm1: gpm1 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpm2: gpm2 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpm3: gpm3 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpm4: gpm4 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpx0: gpx0 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| interrupt-parent = <&gic>; |
| interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>, |
| <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpx1: gpx1 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| interrupt-parent = <&gic>; |
| interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>, |
| <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpx2: gpx2 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpx3: gpx3 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| sd0_clk: sd0-clk { |
| samsung,pins = "gpk0-0"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <3>; |
| }; |
| |
| sd0_cmd: sd0-cmd { |
| samsung,pins = "gpk0-1"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <3>; |
| }; |
| |
| sd0_cd: sd0-cd { |
| samsung,pins = "gpk0-2"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <3>; |
| }; |
| |
| sd0_rdqs: sd0-rdqs { |
| samsung,pins = "gpk0-7"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <3>; |
| }; |
| |
| sd0_bus1: sd0-bus-width1 { |
| samsung,pins = "gpk0-3"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <3>; |
| }; |
| |
| sd0_bus4: sd0-bus-width4 { |
| samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <3>; |
| }; |
| |
| sd0_bus8: sd0-bus-width8 { |
| samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <3>; |
| }; |
| |
| sd1_clk: sd1-clk { |
| samsung,pins = "gpk1-0"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <3>; |
| }; |
| |
| sd1_cmd: sd1-cmd { |
| samsung,pins = "gpk1-1"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <3>; |
| }; |
| |
| sd1_cd: sd1-cd { |
| samsung,pins = "gpk1-2"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <3>; |
| }; |
| |
| sd1_bus1: sd1-bus-width1 { |
| samsung,pins = "gpk1-3"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <3>; |
| }; |
| |
| sd1_bus4: sd1-bus-width4 { |
| samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <3>; |
| }; |
| |
| cam_port_b_io: cam-port-b-io { |
| samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", |
| "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", |
| "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1"; |
| samsung,pin-function = <3>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| cam_port_b_clk_active: cam-port-b-clk-active { |
| samsung,pins = "gpm2-2"; |
| samsung,pin-function = <3>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <3>; |
| }; |
| |
| cam_port_b_clk_idle: cam-port-b-clk-idle { |
| samsung,pins = "gpm2-2"; |
| samsung,pin-function = <0>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| fimc_is_i2c0: fimc-is-i2c0 { |
| samsung,pins = "gpm4-0", "gpm4-1"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| fimc_is_i2c1: fimc-is-i2c1 { |
| samsung,pins = "gpm4-2", "gpm4-3"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| fimc_is_uart: fimc-is-uart { |
| samsung,pins = "gpm3-5", "gpm3-7"; |
| samsung,pin-function = <3>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| }; |
