|  | /* | 
|  | * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation | 
|  | * | 
|  | * Rewrite, cleanup: | 
|  | * | 
|  | * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation | 
|  | * Copyright (C) 2006 Olof Johansson <olof@lixom.net> | 
|  | * | 
|  | * Dynamic DMA mapping support, pSeries-specific parts, both SMP and LPAR. | 
|  | * | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/memblock.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/crash_dump.h> | 
|  | #include <linux/memory.h> | 
|  | #include <linux/of.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/prom.h> | 
|  | #include <asm/rtas.h> | 
|  | #include <asm/iommu.h> | 
|  | #include <asm/pci-bridge.h> | 
|  | #include <asm/machdep.h> | 
|  | #include <asm/firmware.h> | 
|  | #include <asm/tce.h> | 
|  | #include <asm/ppc-pci.h> | 
|  | #include <asm/udbg.h> | 
|  | #include <asm/mmzone.h> | 
|  | #include <asm/plpar_wrappers.h> | 
|  |  | 
|  | #include "pseries.h" | 
|  |  | 
|  | static void tce_invalidate_pSeries_sw(struct iommu_table *tbl, | 
|  | __be64 *startp, __be64 *endp) | 
|  | { | 
|  | u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index; | 
|  | unsigned long start, end, inc; | 
|  |  | 
|  | start = __pa(startp); | 
|  | end = __pa(endp); | 
|  | inc = L1_CACHE_BYTES; /* invalidate a cacheline of TCEs at a time */ | 
|  |  | 
|  | /* If this is non-zero, change the format.  We shift the | 
|  | * address and or in the magic from the device tree. */ | 
|  | if (tbl->it_busno) { | 
|  | start <<= 12; | 
|  | end <<= 12; | 
|  | inc <<= 12; | 
|  | start |= tbl->it_busno; | 
|  | end |= tbl->it_busno; | 
|  | } | 
|  |  | 
|  | end |= inc - 1; /* round up end to be different than start */ | 
|  |  | 
|  | mb(); /* Make sure TCEs in memory are written */ | 
|  | while (start <= end) { | 
|  | out_be64(invalidate, start); | 
|  | start += inc; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int tce_build_pSeries(struct iommu_table *tbl, long index, | 
|  | long npages, unsigned long uaddr, | 
|  | enum dma_data_direction direction, | 
|  | struct dma_attrs *attrs) | 
|  | { | 
|  | u64 proto_tce; | 
|  | __be64 *tcep, *tces; | 
|  | u64 rpn; | 
|  |  | 
|  | proto_tce = TCE_PCI_READ; // Read allowed | 
|  |  | 
|  | if (direction != DMA_TO_DEVICE) | 
|  | proto_tce |= TCE_PCI_WRITE; | 
|  |  | 
|  | tces = tcep = ((__be64 *)tbl->it_base) + index; | 
|  |  | 
|  | while (npages--) { | 
|  | /* can't move this out since we might cross MEMBLOCK boundary */ | 
|  | rpn = __pa(uaddr) >> TCE_SHIFT; | 
|  | *tcep = cpu_to_be64(proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT); | 
|  |  | 
|  | uaddr += TCE_PAGE_SIZE; | 
|  | tcep++; | 
|  | } | 
|  |  | 
|  | if (tbl->it_type & TCE_PCI_SWINV_CREATE) | 
|  | tce_invalidate_pSeries_sw(tbl, tces, tcep - 1); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages) | 
|  | { | 
|  | __be64 *tcep, *tces; | 
|  |  | 
|  | tces = tcep = ((__be64 *)tbl->it_base) + index; | 
|  |  | 
|  | while (npages--) | 
|  | *(tcep++) = 0; | 
|  |  | 
|  | if (tbl->it_type & TCE_PCI_SWINV_FREE) | 
|  | tce_invalidate_pSeries_sw(tbl, tces, tcep - 1); | 
|  | } | 
|  |  | 
|  | static unsigned long tce_get_pseries(struct iommu_table *tbl, long index) | 
|  | { | 
|  | __be64 *tcep; | 
|  |  | 
|  | tcep = ((__be64 *)tbl->it_base) + index; | 
|  |  | 
|  | return be64_to_cpu(*tcep); | 
|  | } | 
|  |  | 
|  | static void tce_free_pSeriesLP(struct iommu_table*, long, long); | 
|  | static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long); | 
|  |  | 
|  | static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum, | 
|  | long npages, unsigned long uaddr, | 
|  | enum dma_data_direction direction, | 
|  | struct dma_attrs *attrs) | 
|  | { | 
|  | u64 rc = 0; | 
|  | u64 proto_tce, tce; | 
|  | u64 rpn; | 
|  | int ret = 0; | 
|  | long tcenum_start = tcenum, npages_start = npages; | 
|  |  | 
|  | rpn = __pa(uaddr) >> TCE_SHIFT; | 
|  | proto_tce = TCE_PCI_READ; | 
|  | if (direction != DMA_TO_DEVICE) | 
|  | proto_tce |= TCE_PCI_WRITE; | 
|  |  | 
|  | while (npages--) { | 
|  | tce = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT; | 
|  | rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, tce); | 
|  |  | 
|  | if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) { | 
|  | ret = (int)rc; | 
|  | tce_free_pSeriesLP(tbl, tcenum_start, | 
|  | (npages_start - (npages + 1))); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (rc && printk_ratelimit()) { | 
|  | printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc); | 
|  | printk("\tindex   = 0x%llx\n", (u64)tbl->it_index); | 
|  | printk("\ttcenum  = 0x%llx\n", (u64)tcenum); | 
|  | printk("\ttce val = 0x%llx\n", tce ); | 
|  | dump_stack(); | 
|  | } | 
|  |  | 
|  | tcenum++; | 
|  | rpn++; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static DEFINE_PER_CPU(__be64 *, tce_page); | 
|  |  | 
|  | static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, | 
|  | long npages, unsigned long uaddr, | 
|  | enum dma_data_direction direction, | 
|  | struct dma_attrs *attrs) | 
|  | { | 
|  | u64 rc = 0; | 
|  | u64 proto_tce; | 
|  | __be64 *tcep; | 
|  | u64 rpn; | 
|  | long l, limit; | 
|  | long tcenum_start = tcenum, npages_start = npages; | 
|  | int ret = 0; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (npages == 1) { | 
|  | return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, | 
|  | direction, attrs); | 
|  | } | 
|  |  | 
|  | local_irq_save(flags);	/* to protect tcep and the page behind it */ | 
|  |  | 
|  | tcep = __this_cpu_read(tce_page); | 
|  |  | 
|  | /* This is safe to do since interrupts are off when we're called | 
|  | * from iommu_alloc{,_sg}() | 
|  | */ | 
|  | if (!tcep) { | 
|  | tcep = (__be64 *)__get_free_page(GFP_ATOMIC); | 
|  | /* If allocation fails, fall back to the loop implementation */ | 
|  | if (!tcep) { | 
|  | local_irq_restore(flags); | 
|  | return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, | 
|  | direction, attrs); | 
|  | } | 
|  | __this_cpu_write(tce_page, tcep); | 
|  | } | 
|  |  | 
|  | rpn = __pa(uaddr) >> TCE_SHIFT; | 
|  | proto_tce = TCE_PCI_READ; | 
|  | if (direction != DMA_TO_DEVICE) | 
|  | proto_tce |= TCE_PCI_WRITE; | 
|  |  | 
|  | /* We can map max one pageful of TCEs at a time */ | 
|  | do { | 
|  | /* | 
|  | * Set up the page with TCE data, looping through and setting | 
|  | * the values. | 
|  | */ | 
|  | limit = min_t(long, npages, 4096/TCE_ENTRY_SIZE); | 
|  |  | 
|  | for (l = 0; l < limit; l++) { | 
|  | tcep[l] = cpu_to_be64(proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT); | 
|  | rpn++; | 
|  | } | 
|  |  | 
|  | rc = plpar_tce_put_indirect((u64)tbl->it_index, | 
|  | (u64)tcenum << 12, | 
|  | (u64)__pa(tcep), | 
|  | limit); | 
|  |  | 
|  | npages -= limit; | 
|  | tcenum += limit; | 
|  | } while (npages > 0 && !rc); | 
|  |  | 
|  | local_irq_restore(flags); | 
|  |  | 
|  | if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) { | 
|  | ret = (int)rc; | 
|  | tce_freemulti_pSeriesLP(tbl, tcenum_start, | 
|  | (npages_start - (npages + limit))); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (rc && printk_ratelimit()) { | 
|  | printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc); | 
|  | printk("\tindex   = 0x%llx\n", (u64)tbl->it_index); | 
|  | printk("\tnpages  = 0x%llx\n", (u64)npages); | 
|  | printk("\ttce[0] val = 0x%llx\n", tcep[0]); | 
|  | dump_stack(); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages) | 
|  | { | 
|  | u64 rc; | 
|  |  | 
|  | while (npages--) { | 
|  | rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, 0); | 
|  |  | 
|  | if (rc && printk_ratelimit()) { | 
|  | printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc); | 
|  | printk("\tindex   = 0x%llx\n", (u64)tbl->it_index); | 
|  | printk("\ttcenum  = 0x%llx\n", (u64)tcenum); | 
|  | dump_stack(); | 
|  | } | 
|  |  | 
|  | tcenum++; | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages) | 
|  | { | 
|  | u64 rc; | 
|  |  | 
|  | rc = plpar_tce_stuff((u64)tbl->it_index, (u64)tcenum << 12, 0, npages); | 
|  |  | 
|  | if (rc && printk_ratelimit()) { | 
|  | printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n"); | 
|  | printk("\trc      = %lld\n", rc); | 
|  | printk("\tindex   = 0x%llx\n", (u64)tbl->it_index); | 
|  | printk("\tnpages  = 0x%llx\n", (u64)npages); | 
|  | dump_stack(); | 
|  | } | 
|  | } | 
|  |  | 
|  | static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum) | 
|  | { | 
|  | u64 rc; | 
|  | unsigned long tce_ret; | 
|  |  | 
|  | rc = plpar_tce_get((u64)tbl->it_index, (u64)tcenum << 12, &tce_ret); | 
|  |  | 
|  | if (rc && printk_ratelimit()) { | 
|  | printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%lld\n", rc); | 
|  | printk("\tindex   = 0x%llx\n", (u64)tbl->it_index); | 
|  | printk("\ttcenum  = 0x%llx\n", (u64)tcenum); | 
|  | dump_stack(); | 
|  | } | 
|  |  | 
|  | return tce_ret; | 
|  | } | 
|  |  | 
|  | /* this is compatible with cells for the device tree property */ | 
|  | struct dynamic_dma_window_prop { | 
|  | __be32	liobn;		/* tce table number */ | 
|  | __be64	dma_base;	/* address hi,lo */ | 
|  | __be32	tce_shift;	/* ilog2(tce_page_size) */ | 
|  | __be32	window_shift;	/* ilog2(tce_window_size) */ | 
|  | }; | 
|  |  | 
|  | struct direct_window { | 
|  | struct device_node *device; | 
|  | const struct dynamic_dma_window_prop *prop; | 
|  | struct list_head list; | 
|  | }; | 
|  |  | 
|  | /* Dynamic DMA Window support */ | 
|  | struct ddw_query_response { | 
|  | u32 windows_available; | 
|  | u32 largest_available_block; | 
|  | u32 page_size; | 
|  | u32 migration_capable; | 
|  | }; | 
|  |  | 
|  | struct ddw_create_response { | 
|  | u32 liobn; | 
|  | u32 addr_hi; | 
|  | u32 addr_lo; | 
|  | }; | 
|  |  | 
|  | static LIST_HEAD(direct_window_list); | 
|  | /* prevents races between memory on/offline and window creation */ | 
|  | static DEFINE_SPINLOCK(direct_window_list_lock); | 
|  | /* protects initializing window twice for same device */ | 
|  | static DEFINE_MUTEX(direct_window_init_mutex); | 
|  | #define DIRECT64_PROPNAME "linux,direct64-ddr-window-info" | 
|  |  | 
|  | static int tce_clearrange_multi_pSeriesLP(unsigned long start_pfn, | 
|  | unsigned long num_pfn, const void *arg) | 
|  | { | 
|  | const struct dynamic_dma_window_prop *maprange = arg; | 
|  | int rc; | 
|  | u64 tce_size, num_tce, dma_offset, next; | 
|  | u32 tce_shift; | 
|  | long limit; | 
|  |  | 
|  | tce_shift = be32_to_cpu(maprange->tce_shift); | 
|  | tce_size = 1ULL << tce_shift; | 
|  | next = start_pfn << PAGE_SHIFT; | 
|  | num_tce = num_pfn << PAGE_SHIFT; | 
|  |  | 
|  | /* round back to the beginning of the tce page size */ | 
|  | num_tce += next & (tce_size - 1); | 
|  | next &= ~(tce_size - 1); | 
|  |  | 
|  | /* covert to number of tces */ | 
|  | num_tce |= tce_size - 1; | 
|  | num_tce >>= tce_shift; | 
|  |  | 
|  | do { | 
|  | /* | 
|  | * Set up the page with TCE data, looping through and setting | 
|  | * the values. | 
|  | */ | 
|  | limit = min_t(long, num_tce, 512); | 
|  | dma_offset = next + be64_to_cpu(maprange->dma_base); | 
|  |  | 
|  | rc = plpar_tce_stuff((u64)be32_to_cpu(maprange->liobn), | 
|  | dma_offset, | 
|  | 0, limit); | 
|  | next += limit * tce_size; | 
|  | num_tce -= limit; | 
|  | } while (num_tce > 0 && !rc); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int tce_setrange_multi_pSeriesLP(unsigned long start_pfn, | 
|  | unsigned long num_pfn, const void *arg) | 
|  | { | 
|  | const struct dynamic_dma_window_prop *maprange = arg; | 
|  | u64 tce_size, num_tce, dma_offset, next, proto_tce, liobn; | 
|  | __be64 *tcep; | 
|  | u32 tce_shift; | 
|  | u64 rc = 0; | 
|  | long l, limit; | 
|  |  | 
|  | local_irq_disable();	/* to protect tcep and the page behind it */ | 
|  | tcep = __this_cpu_read(tce_page); | 
|  |  | 
|  | if (!tcep) { | 
|  | tcep = (__be64 *)__get_free_page(GFP_ATOMIC); | 
|  | if (!tcep) { | 
|  | local_irq_enable(); | 
|  | return -ENOMEM; | 
|  | } | 
|  | __this_cpu_write(tce_page, tcep); | 
|  | } | 
|  |  | 
|  | proto_tce = TCE_PCI_READ | TCE_PCI_WRITE; | 
|  |  | 
|  | liobn = (u64)be32_to_cpu(maprange->liobn); | 
|  | tce_shift = be32_to_cpu(maprange->tce_shift); | 
|  | tce_size = 1ULL << tce_shift; | 
|  | next = start_pfn << PAGE_SHIFT; | 
|  | num_tce = num_pfn << PAGE_SHIFT; | 
|  |  | 
|  | /* round back to the beginning of the tce page size */ | 
|  | num_tce += next & (tce_size - 1); | 
|  | next &= ~(tce_size - 1); | 
|  |  | 
|  | /* covert to number of tces */ | 
|  | num_tce |= tce_size - 1; | 
|  | num_tce >>= tce_shift; | 
|  |  | 
|  | /* We can map max one pageful of TCEs at a time */ | 
|  | do { | 
|  | /* | 
|  | * Set up the page with TCE data, looping through and setting | 
|  | * the values. | 
|  | */ | 
|  | limit = min_t(long, num_tce, 4096/TCE_ENTRY_SIZE); | 
|  | dma_offset = next + be64_to_cpu(maprange->dma_base); | 
|  |  | 
|  | for (l = 0; l < limit; l++) { | 
|  | tcep[l] = cpu_to_be64(proto_tce | next); | 
|  | next += tce_size; | 
|  | } | 
|  |  | 
|  | rc = plpar_tce_put_indirect(liobn, | 
|  | dma_offset, | 
|  | (u64)__pa(tcep), | 
|  | limit); | 
|  |  | 
|  | num_tce -= limit; | 
|  | } while (num_tce > 0 && !rc); | 
|  |  | 
|  | /* error cleanup: caller will clear whole range */ | 
|  |  | 
|  | local_irq_enable(); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int tce_setrange_multi_pSeriesLP_walk(unsigned long start_pfn, | 
|  | unsigned long num_pfn, void *arg) | 
|  | { | 
|  | return tce_setrange_multi_pSeriesLP(start_pfn, num_pfn, arg); | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifdef CONFIG_PCI | 
|  | static void iommu_table_setparms(struct pci_controller *phb, | 
|  | struct device_node *dn, | 
|  | struct iommu_table *tbl) | 
|  | { | 
|  | struct device_node *node; | 
|  | const unsigned long *basep, *sw_inval; | 
|  | const u32 *sizep; | 
|  |  | 
|  | node = phb->dn; | 
|  |  | 
|  | basep = of_get_property(node, "linux,tce-base", NULL); | 
|  | sizep = of_get_property(node, "linux,tce-size", NULL); | 
|  | if (basep == NULL || sizep == NULL) { | 
|  | printk(KERN_ERR "PCI_DMA: iommu_table_setparms: %s has " | 
|  | "missing tce entries !\n", dn->full_name); | 
|  | return; | 
|  | } | 
|  |  | 
|  | tbl->it_base = (unsigned long)__va(*basep); | 
|  |  | 
|  | if (!is_kdump_kernel()) | 
|  | memset((void *)tbl->it_base, 0, *sizep); | 
|  |  | 
|  | tbl->it_busno = phb->bus->number; | 
|  | tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K; | 
|  |  | 
|  | /* Units of tce entries */ | 
|  | tbl->it_offset = phb->dma_window_base_cur >> tbl->it_page_shift; | 
|  |  | 
|  | /* Test if we are going over 2GB of DMA space */ | 
|  | if (phb->dma_window_base_cur + phb->dma_window_size > 0x80000000ul) { | 
|  | udbg_printf("PCI_DMA: Unexpected number of IOAs under this PHB.\n"); | 
|  | panic("PCI_DMA: Unexpected number of IOAs under this PHB.\n"); | 
|  | } | 
|  |  | 
|  | phb->dma_window_base_cur += phb->dma_window_size; | 
|  |  | 
|  | /* Set the tce table size - measured in entries */ | 
|  | tbl->it_size = phb->dma_window_size >> tbl->it_page_shift; | 
|  |  | 
|  | tbl->it_index = 0; | 
|  | tbl->it_blocksize = 16; | 
|  | tbl->it_type = TCE_PCI; | 
|  |  | 
|  | sw_inval = of_get_property(node, "linux,tce-sw-invalidate-info", NULL); | 
|  | if (sw_inval) { | 
|  | /* | 
|  | * This property contains information on how to | 
|  | * invalidate the TCE entry.  The first property is | 
|  | * the base MMIO address used to invalidate entries. | 
|  | * The second property tells us the format of the TCE | 
|  | * invalidate (whether it needs to be shifted) and | 
|  | * some magic routing info to add to our invalidate | 
|  | * command. | 
|  | */ | 
|  | tbl->it_index = (unsigned long) ioremap(sw_inval[0], 8); | 
|  | tbl->it_busno = sw_inval[1]; /* overload this with magic */ | 
|  | tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * iommu_table_setparms_lpar | 
|  | * | 
|  | * Function: On pSeries LPAR systems, return TCE table info, given a pci bus. | 
|  | */ | 
|  | static void iommu_table_setparms_lpar(struct pci_controller *phb, | 
|  | struct device_node *dn, | 
|  | struct iommu_table *tbl, | 
|  | const __be32 *dma_window) | 
|  | { | 
|  | unsigned long offset, size; | 
|  |  | 
|  | of_parse_dma_window(dn, dma_window, &tbl->it_index, &offset, &size); | 
|  |  | 
|  | tbl->it_busno = phb->bus->number; | 
|  | tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K; | 
|  | tbl->it_base   = 0; | 
|  | tbl->it_blocksize  = 16; | 
|  | tbl->it_type = TCE_PCI; | 
|  | tbl->it_offset = offset >> tbl->it_page_shift; | 
|  | tbl->it_size = size >> tbl->it_page_shift; | 
|  | } | 
|  |  | 
|  | static void pci_dma_bus_setup_pSeries(struct pci_bus *bus) | 
|  | { | 
|  | struct device_node *dn; | 
|  | struct iommu_table *tbl; | 
|  | struct device_node *isa_dn, *isa_dn_orig; | 
|  | struct device_node *tmp; | 
|  | struct pci_dn *pci; | 
|  | int children; | 
|  |  | 
|  | dn = pci_bus_to_OF_node(bus); | 
|  |  | 
|  | pr_debug("pci_dma_bus_setup_pSeries: setting up bus %s\n", dn->full_name); | 
|  |  | 
|  | if (bus->self) { | 
|  | /* This is not a root bus, any setup will be done for the | 
|  | * device-side of the bridge in iommu_dev_setup_pSeries(). | 
|  | */ | 
|  | return; | 
|  | } | 
|  | pci = PCI_DN(dn); | 
|  |  | 
|  | /* Check if the ISA bus on the system is under | 
|  | * this PHB. | 
|  | */ | 
|  | isa_dn = isa_dn_orig = of_find_node_by_type(NULL, "isa"); | 
|  |  | 
|  | while (isa_dn && isa_dn != dn) | 
|  | isa_dn = isa_dn->parent; | 
|  |  | 
|  | of_node_put(isa_dn_orig); | 
|  |  | 
|  | /* Count number of direct PCI children of the PHB. */ | 
|  | for (children = 0, tmp = dn->child; tmp; tmp = tmp->sibling) | 
|  | children++; | 
|  |  | 
|  | pr_debug("Children: %d\n", children); | 
|  |  | 
|  | /* Calculate amount of DMA window per slot. Each window must be | 
|  | * a power of two (due to pci_alloc_consistent requirements). | 
|  | * | 
|  | * Keep 256MB aside for PHBs with ISA. | 
|  | */ | 
|  |  | 
|  | if (!isa_dn) { | 
|  | /* No ISA/IDE - just set window size and return */ | 
|  | pci->phb->dma_window_size = 0x80000000ul; /* To be divided */ | 
|  |  | 
|  | while (pci->phb->dma_window_size * children > 0x80000000ul) | 
|  | pci->phb->dma_window_size >>= 1; | 
|  | pr_debug("No ISA/IDE, window size is 0x%llx\n", | 
|  | pci->phb->dma_window_size); | 
|  | pci->phb->dma_window_base_cur = 0; | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* If we have ISA, then we probably have an IDE | 
|  | * controller too. Allocate a 128MB table but | 
|  | * skip the first 128MB to avoid stepping on ISA | 
|  | * space. | 
|  | */ | 
|  | pci->phb->dma_window_size = 0x8000000ul; | 
|  | pci->phb->dma_window_base_cur = 0x8000000ul; | 
|  |  | 
|  | tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, | 
|  | pci->phb->node); | 
|  |  | 
|  | iommu_table_setparms(pci->phb, dn, tbl); | 
|  | pci->iommu_table = iommu_init_table(tbl, pci->phb->node); | 
|  | iommu_register_group(tbl, pci_domain_nr(bus), 0); | 
|  |  | 
|  | /* Divide the rest (1.75GB) among the children */ | 
|  | pci->phb->dma_window_size = 0x80000000ul; | 
|  | while (pci->phb->dma_window_size * children > 0x70000000ul) | 
|  | pci->phb->dma_window_size >>= 1; | 
|  |  | 
|  | pr_debug("ISA/IDE, window size is 0x%llx\n", pci->phb->dma_window_size); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus) | 
|  | { | 
|  | struct iommu_table *tbl; | 
|  | struct device_node *dn, *pdn; | 
|  | struct pci_dn *ppci; | 
|  | const __be32 *dma_window = NULL; | 
|  |  | 
|  | dn = pci_bus_to_OF_node(bus); | 
|  |  | 
|  | pr_debug("pci_dma_bus_setup_pSeriesLP: setting up bus %s\n", | 
|  | dn->full_name); | 
|  |  | 
|  | /* Find nearest ibm,dma-window, walking up the device tree */ | 
|  | for (pdn = dn; pdn != NULL; pdn = pdn->parent) { | 
|  | dma_window = of_get_property(pdn, "ibm,dma-window", NULL); | 
|  | if (dma_window != NULL) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (dma_window == NULL) { | 
|  | pr_debug("  no ibm,dma-window property !\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ppci = PCI_DN(pdn); | 
|  |  | 
|  | pr_debug("  parent is %s, iommu_table: 0x%p\n", | 
|  | pdn->full_name, ppci->iommu_table); | 
|  |  | 
|  | if (!ppci->iommu_table) { | 
|  | tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, | 
|  | ppci->phb->node); | 
|  | iommu_table_setparms_lpar(ppci->phb, pdn, tbl, dma_window); | 
|  | ppci->iommu_table = iommu_init_table(tbl, ppci->phb->node); | 
|  | iommu_register_group(tbl, pci_domain_nr(bus), 0); | 
|  | pr_debug("  created table: %p\n", ppci->iommu_table); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static void pci_dma_dev_setup_pSeries(struct pci_dev *dev) | 
|  | { | 
|  | struct device_node *dn; | 
|  | struct iommu_table *tbl; | 
|  |  | 
|  | pr_debug("pci_dma_dev_setup_pSeries: %s\n", pci_name(dev)); | 
|  |  | 
|  | dn = dev->dev.of_node; | 
|  |  | 
|  | /* If we're the direct child of a root bus, then we need to allocate | 
|  | * an iommu table ourselves. The bus setup code should have setup | 
|  | * the window sizes already. | 
|  | */ | 
|  | if (!dev->bus->self) { | 
|  | struct pci_controller *phb = PCI_DN(dn)->phb; | 
|  |  | 
|  | pr_debug(" --> first child, no bridge. Allocating iommu table.\n"); | 
|  | tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, | 
|  | phb->node); | 
|  | iommu_table_setparms(phb, dn, tbl); | 
|  | PCI_DN(dn)->iommu_table = iommu_init_table(tbl, phb->node); | 
|  | iommu_register_group(tbl, pci_domain_nr(phb->bus), 0); | 
|  | set_iommu_table_base_and_group(&dev->dev, | 
|  | PCI_DN(dn)->iommu_table); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* If this device is further down the bus tree, search upwards until | 
|  | * an already allocated iommu table is found and use that. | 
|  | */ | 
|  |  | 
|  | while (dn && PCI_DN(dn) && PCI_DN(dn)->iommu_table == NULL) | 
|  | dn = dn->parent; | 
|  |  | 
|  | if (dn && PCI_DN(dn)) | 
|  | set_iommu_table_base_and_group(&dev->dev, | 
|  | PCI_DN(dn)->iommu_table); | 
|  | else | 
|  | printk(KERN_WARNING "iommu: Device %s has no iommu table\n", | 
|  | pci_name(dev)); | 
|  | } | 
|  |  | 
|  | static int __read_mostly disable_ddw; | 
|  |  | 
|  | static int __init disable_ddw_setup(char *str) | 
|  | { | 
|  | disable_ddw = 1; | 
|  | printk(KERN_INFO "ppc iommu: disabling ddw.\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | early_param("disable_ddw", disable_ddw_setup); | 
|  |  | 
|  | static void remove_ddw(struct device_node *np, bool remove_prop) | 
|  | { | 
|  | struct dynamic_dma_window_prop *dwp; | 
|  | struct property *win64; | 
|  | u32 ddw_avail[3]; | 
|  | u64 liobn; | 
|  | int ret = 0; | 
|  |  | 
|  | ret = of_property_read_u32_array(np, "ibm,ddw-applicable", | 
|  | &ddw_avail[0], 3); | 
|  |  | 
|  | win64 = of_find_property(np, DIRECT64_PROPNAME, NULL); | 
|  | if (!win64) | 
|  | return; | 
|  |  | 
|  | if (ret || win64->length < sizeof(*dwp)) | 
|  | goto delprop; | 
|  |  | 
|  | dwp = win64->value; | 
|  | liobn = (u64)be32_to_cpu(dwp->liobn); | 
|  |  | 
|  | /* clear the whole window, note the arg is in kernel pages */ | 
|  | ret = tce_clearrange_multi_pSeriesLP(0, | 
|  | 1ULL << (be32_to_cpu(dwp->window_shift) - PAGE_SHIFT), dwp); | 
|  | if (ret) | 
|  | pr_warning("%s failed to clear tces in window.\n", | 
|  | np->full_name); | 
|  | else | 
|  | pr_debug("%s successfully cleared tces in window.\n", | 
|  | np->full_name); | 
|  |  | 
|  | ret = rtas_call(ddw_avail[2], 1, 1, NULL, liobn); | 
|  | if (ret) | 
|  | pr_warning("%s: failed to remove direct window: rtas returned " | 
|  | "%d to ibm,remove-pe-dma-window(%x) %llx\n", | 
|  | np->full_name, ret, ddw_avail[2], liobn); | 
|  | else | 
|  | pr_debug("%s: successfully removed direct window: rtas returned " | 
|  | "%d to ibm,remove-pe-dma-window(%x) %llx\n", | 
|  | np->full_name, ret, ddw_avail[2], liobn); | 
|  |  | 
|  | delprop: | 
|  | if (remove_prop) | 
|  | ret = of_remove_property(np, win64); | 
|  | if (ret) | 
|  | pr_warning("%s: failed to remove direct window property: %d\n", | 
|  | np->full_name, ret); | 
|  | } | 
|  |  | 
|  | static u64 find_existing_ddw(struct device_node *pdn) | 
|  | { | 
|  | struct direct_window *window; | 
|  | const struct dynamic_dma_window_prop *direct64; | 
|  | u64 dma_addr = 0; | 
|  |  | 
|  | spin_lock(&direct_window_list_lock); | 
|  | /* check if we already created a window and dupe that config if so */ | 
|  | list_for_each_entry(window, &direct_window_list, list) { | 
|  | if (window->device == pdn) { | 
|  | direct64 = window->prop; | 
|  | dma_addr = be64_to_cpu(direct64->dma_base); | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock(&direct_window_list_lock); | 
|  |  | 
|  | return dma_addr; | 
|  | } | 
|  |  | 
|  | static int find_existing_ddw_windows(void) | 
|  | { | 
|  | int len; | 
|  | struct device_node *pdn; | 
|  | struct direct_window *window; | 
|  | const struct dynamic_dma_window_prop *direct64; | 
|  |  | 
|  | if (!firmware_has_feature(FW_FEATURE_LPAR)) | 
|  | return 0; | 
|  |  | 
|  | for_each_node_with_property(pdn, DIRECT64_PROPNAME) { | 
|  | direct64 = of_get_property(pdn, DIRECT64_PROPNAME, &len); | 
|  | if (!direct64) | 
|  | continue; | 
|  |  | 
|  | window = kzalloc(sizeof(*window), GFP_KERNEL); | 
|  | if (!window || len < sizeof(struct dynamic_dma_window_prop)) { | 
|  | kfree(window); | 
|  | remove_ddw(pdn, true); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | window->device = pdn; | 
|  | window->prop = direct64; | 
|  | spin_lock(&direct_window_list_lock); | 
|  | list_add(&window->list, &direct_window_list); | 
|  | spin_unlock(&direct_window_list_lock); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | machine_arch_initcall(pseries, find_existing_ddw_windows); | 
|  |  | 
|  | static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail, | 
|  | struct ddw_query_response *query) | 
|  | { | 
|  | struct eeh_dev *edev; | 
|  | u32 cfg_addr; | 
|  | u64 buid; | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * Get the config address and phb buid of the PE window. | 
|  | * Rely on eeh to retrieve this for us. | 
|  | * Retrieve them from the pci device, not the node with the | 
|  | * dma-window property | 
|  | */ | 
|  | edev = pci_dev_to_eeh_dev(dev); | 
|  | cfg_addr = edev->config_addr; | 
|  | if (edev->pe_config_addr) | 
|  | cfg_addr = edev->pe_config_addr; | 
|  | buid = edev->phb->buid; | 
|  |  | 
|  | ret = rtas_call(ddw_avail[0], 3, 5, (u32 *)query, | 
|  | cfg_addr, BUID_HI(buid), BUID_LO(buid)); | 
|  | dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x" | 
|  | " returned %d\n", ddw_avail[0], cfg_addr, BUID_HI(buid), | 
|  | BUID_LO(buid), ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail, | 
|  | struct ddw_create_response *create, int page_shift, | 
|  | int window_shift) | 
|  | { | 
|  | struct eeh_dev *edev; | 
|  | u32 cfg_addr; | 
|  | u64 buid; | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * Get the config address and phb buid of the PE window. | 
|  | * Rely on eeh to retrieve this for us. | 
|  | * Retrieve them from the pci device, not the node with the | 
|  | * dma-window property | 
|  | */ | 
|  | edev = pci_dev_to_eeh_dev(dev); | 
|  | cfg_addr = edev->config_addr; | 
|  | if (edev->pe_config_addr) | 
|  | cfg_addr = edev->pe_config_addr; | 
|  | buid = edev->phb->buid; | 
|  |  | 
|  | do { | 
|  | /* extra outputs are LIOBN and dma-addr (hi, lo) */ | 
|  | ret = rtas_call(ddw_avail[1], 5, 4, (u32 *)create, | 
|  | cfg_addr, BUID_HI(buid), BUID_LO(buid), | 
|  | page_shift, window_shift); | 
|  | } while (rtas_busy_delay(ret)); | 
|  | dev_info(&dev->dev, | 
|  | "ibm,create-pe-dma-window(%x) %x %x %x %x %x returned %d " | 
|  | "(liobn = 0x%x starting addr = %x %x)\n", ddw_avail[1], | 
|  | cfg_addr, BUID_HI(buid), BUID_LO(buid), page_shift, | 
|  | window_shift, ret, create->liobn, create->addr_hi, create->addr_lo); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | struct failed_ddw_pdn { | 
|  | struct device_node *pdn; | 
|  | struct list_head list; | 
|  | }; | 
|  |  | 
|  | static LIST_HEAD(failed_ddw_pdn_list); | 
|  |  | 
|  | /* | 
|  | * If the PE supports dynamic dma windows, and there is space for a table | 
|  | * that can map all pages in a linear offset, then setup such a table, | 
|  | * and record the dma-offset in the struct device. | 
|  | * | 
|  | * dev: the pci device we are checking | 
|  | * pdn: the parent pe node with the ibm,dma_window property | 
|  | * Future: also check if we can remap the base window for our base page size | 
|  | * | 
|  | * returns the dma offset for use by dma_set_mask | 
|  | */ | 
|  | static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn) | 
|  | { | 
|  | int len, ret; | 
|  | struct ddw_query_response query; | 
|  | struct ddw_create_response create; | 
|  | int page_shift; | 
|  | u64 dma_addr, max_addr; | 
|  | struct device_node *dn; | 
|  | u32 ddw_avail[3]; | 
|  | struct direct_window *window; | 
|  | struct property *win64; | 
|  | struct dynamic_dma_window_prop *ddwprop; | 
|  | struct failed_ddw_pdn *fpdn; | 
|  |  | 
|  | mutex_lock(&direct_window_init_mutex); | 
|  |  | 
|  | dma_addr = find_existing_ddw(pdn); | 
|  | if (dma_addr != 0) | 
|  | goto out_unlock; | 
|  |  | 
|  | /* | 
|  | * If we already went through this for a previous function of | 
|  | * the same device and failed, we don't want to muck with the | 
|  | * DMA window again, as it will race with in-flight operations | 
|  | * and can lead to EEHs. The above mutex protects access to the | 
|  | * list. | 
|  | */ | 
|  | list_for_each_entry(fpdn, &failed_ddw_pdn_list, list) { | 
|  | if (!strcmp(fpdn->pdn->full_name, pdn->full_name)) | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * the ibm,ddw-applicable property holds the tokens for: | 
|  | * ibm,query-pe-dma-window | 
|  | * ibm,create-pe-dma-window | 
|  | * ibm,remove-pe-dma-window | 
|  | * for the given node in that order. | 
|  | * the property is actually in the parent, not the PE | 
|  | */ | 
|  | ret = of_property_read_u32_array(pdn, "ibm,ddw-applicable", | 
|  | &ddw_avail[0], 3); | 
|  | if (ret) | 
|  | goto out_failed; | 
|  |  | 
|  | /* | 
|  | * Query if there is a second window of size to map the | 
|  | * whole partition.  Query returns number of windows, largest | 
|  | * block assigned to PE (partition endpoint), and two bitmasks | 
|  | * of page sizes: supported and supported for migrate-dma. | 
|  | */ | 
|  | dn = pci_device_to_OF_node(dev); | 
|  | ret = query_ddw(dev, ddw_avail, &query); | 
|  | if (ret != 0) | 
|  | goto out_failed; | 
|  |  | 
|  | if (query.windows_available == 0) { | 
|  | /* | 
|  | * no additional windows are available for this device. | 
|  | * We might be able to reallocate the existing window, | 
|  | * trading in for a larger page size. | 
|  | */ | 
|  | dev_dbg(&dev->dev, "no free dynamic windows"); | 
|  | goto out_failed; | 
|  | } | 
|  | if (query.page_size & 4) { | 
|  | page_shift = 24; /* 16MB */ | 
|  | } else if (query.page_size & 2) { | 
|  | page_shift = 16; /* 64kB */ | 
|  | } else if (query.page_size & 1) { | 
|  | page_shift = 12; /* 4kB */ | 
|  | } else { | 
|  | dev_dbg(&dev->dev, "no supported direct page size in mask %x", | 
|  | query.page_size); | 
|  | goto out_failed; | 
|  | } | 
|  | /* verify the window * number of ptes will map the partition */ | 
|  | /* check largest block * page size > max memory hotplug addr */ | 
|  | max_addr = memory_hotplug_max(); | 
|  | if (query.largest_available_block < (max_addr >> page_shift)) { | 
|  | dev_dbg(&dev->dev, "can't map partiton max 0x%llx with %u " | 
|  | "%llu-sized pages\n", max_addr,  query.largest_available_block, | 
|  | 1ULL << page_shift); | 
|  | goto out_failed; | 
|  | } | 
|  | len = order_base_2(max_addr); | 
|  | win64 = kzalloc(sizeof(struct property), GFP_KERNEL); | 
|  | if (!win64) { | 
|  | dev_info(&dev->dev, | 
|  | "couldn't allocate property for 64bit dma window\n"); | 
|  | goto out_failed; | 
|  | } | 
|  | win64->name = kstrdup(DIRECT64_PROPNAME, GFP_KERNEL); | 
|  | win64->value = ddwprop = kmalloc(sizeof(*ddwprop), GFP_KERNEL); | 
|  | win64->length = sizeof(*ddwprop); | 
|  | if (!win64->name || !win64->value) { | 
|  | dev_info(&dev->dev, | 
|  | "couldn't allocate property name and value\n"); | 
|  | goto out_free_prop; | 
|  | } | 
|  |  | 
|  | ret = create_ddw(dev, ddw_avail, &create, page_shift, len); | 
|  | if (ret != 0) | 
|  | goto out_free_prop; | 
|  |  | 
|  | ddwprop->liobn = cpu_to_be32(create.liobn); | 
|  | ddwprop->dma_base = cpu_to_be64(((u64)create.addr_hi << 32) | | 
|  | create.addr_lo); | 
|  | ddwprop->tce_shift = cpu_to_be32(page_shift); | 
|  | ddwprop->window_shift = cpu_to_be32(len); | 
|  |  | 
|  | dev_dbg(&dev->dev, "created tce table LIOBN 0x%x for %s\n", | 
|  | create.liobn, dn->full_name); | 
|  |  | 
|  | window = kzalloc(sizeof(*window), GFP_KERNEL); | 
|  | if (!window) | 
|  | goto out_clear_window; | 
|  |  | 
|  | ret = walk_system_ram_range(0, memblock_end_of_DRAM() >> PAGE_SHIFT, | 
|  | win64->value, tce_setrange_multi_pSeriesLP_walk); | 
|  | if (ret) { | 
|  | dev_info(&dev->dev, "failed to map direct window for %s: %d\n", | 
|  | dn->full_name, ret); | 
|  | goto out_free_window; | 
|  | } | 
|  |  | 
|  | ret = of_add_property(pdn, win64); | 
|  | if (ret) { | 
|  | dev_err(&dev->dev, "unable to add dma window property for %s: %d", | 
|  | pdn->full_name, ret); | 
|  | goto out_free_window; | 
|  | } | 
|  |  | 
|  | window->device = pdn; | 
|  | window->prop = ddwprop; | 
|  | spin_lock(&direct_window_list_lock); | 
|  | list_add(&window->list, &direct_window_list); | 
|  | spin_unlock(&direct_window_list_lock); | 
|  |  | 
|  | dma_addr = be64_to_cpu(ddwprop->dma_base); | 
|  | goto out_unlock; | 
|  |  | 
|  | out_free_window: | 
|  | kfree(window); | 
|  |  | 
|  | out_clear_window: | 
|  | remove_ddw(pdn, true); | 
|  |  | 
|  | out_free_prop: | 
|  | kfree(win64->name); | 
|  | kfree(win64->value); | 
|  | kfree(win64); | 
|  |  | 
|  | out_failed: | 
|  |  | 
|  | fpdn = kzalloc(sizeof(*fpdn), GFP_KERNEL); | 
|  | if (!fpdn) | 
|  | goto out_unlock; | 
|  | fpdn->pdn = pdn; | 
|  | list_add(&fpdn->list, &failed_ddw_pdn_list); | 
|  |  | 
|  | out_unlock: | 
|  | mutex_unlock(&direct_window_init_mutex); | 
|  | return dma_addr; | 
|  | } | 
|  |  | 
|  | static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) | 
|  | { | 
|  | struct device_node *pdn, *dn; | 
|  | struct iommu_table *tbl; | 
|  | const __be32 *dma_window = NULL; | 
|  | struct pci_dn *pci; | 
|  |  | 
|  | pr_debug("pci_dma_dev_setup_pSeriesLP: %s\n", pci_name(dev)); | 
|  |  | 
|  | /* dev setup for LPAR is a little tricky, since the device tree might | 
|  | * contain the dma-window properties per-device and not necessarily | 
|  | * for the bus. So we need to search upwards in the tree until we | 
|  | * either hit a dma-window property, OR find a parent with a table | 
|  | * already allocated. | 
|  | */ | 
|  | dn = pci_device_to_OF_node(dev); | 
|  | pr_debug("  node is %s\n", dn->full_name); | 
|  |  | 
|  | for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table; | 
|  | pdn = pdn->parent) { | 
|  | dma_window = of_get_property(pdn, "ibm,dma-window", NULL); | 
|  | if (dma_window) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!pdn || !PCI_DN(pdn)) { | 
|  | printk(KERN_WARNING "pci_dma_dev_setup_pSeriesLP: " | 
|  | "no DMA window found for pci dev=%s dn=%s\n", | 
|  | pci_name(dev), of_node_full_name(dn)); | 
|  | return; | 
|  | } | 
|  | pr_debug("  parent is %s\n", pdn->full_name); | 
|  |  | 
|  | pci = PCI_DN(pdn); | 
|  | if (!pci->iommu_table) { | 
|  | tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, | 
|  | pci->phb->node); | 
|  | iommu_table_setparms_lpar(pci->phb, pdn, tbl, dma_window); | 
|  | pci->iommu_table = iommu_init_table(tbl, pci->phb->node); | 
|  | iommu_register_group(tbl, pci_domain_nr(pci->phb->bus), 0); | 
|  | pr_debug("  created table: %p\n", pci->iommu_table); | 
|  | } else { | 
|  | pr_debug("  found DMA window, table: %p\n", pci->iommu_table); | 
|  | } | 
|  |  | 
|  | set_iommu_table_base_and_group(&dev->dev, pci->iommu_table); | 
|  | } | 
|  |  | 
|  | static int dma_set_mask_pSeriesLP(struct device *dev, u64 dma_mask) | 
|  | { | 
|  | bool ddw_enabled = false; | 
|  | struct device_node *pdn, *dn; | 
|  | struct pci_dev *pdev; | 
|  | const __be32 *dma_window = NULL; | 
|  | u64 dma_offset; | 
|  |  | 
|  | if (!dev->dma_mask) | 
|  | return -EIO; | 
|  |  | 
|  | if (!dev_is_pci(dev)) | 
|  | goto check_mask; | 
|  |  | 
|  | pdev = to_pci_dev(dev); | 
|  |  | 
|  | /* only attempt to use a new window if 64-bit DMA is requested */ | 
|  | if (!disable_ddw && dma_mask == DMA_BIT_MASK(64)) { | 
|  | dn = pci_device_to_OF_node(pdev); | 
|  | dev_dbg(dev, "node is %s\n", dn->full_name); | 
|  |  | 
|  | /* | 
|  | * the device tree might contain the dma-window properties | 
|  | * per-device and not necessarily for the bus. So we need to | 
|  | * search upwards in the tree until we either hit a dma-window | 
|  | * property, OR find a parent with a table already allocated. | 
|  | */ | 
|  | for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table; | 
|  | pdn = pdn->parent) { | 
|  | dma_window = of_get_property(pdn, "ibm,dma-window", NULL); | 
|  | if (dma_window) | 
|  | break; | 
|  | } | 
|  | if (pdn && PCI_DN(pdn)) { | 
|  | dma_offset = enable_ddw(pdev, pdn); | 
|  | if (dma_offset != 0) { | 
|  | dev_info(dev, "Using 64-bit direct DMA at offset %llx\n", dma_offset); | 
|  | set_dma_offset(dev, dma_offset); | 
|  | set_dma_ops(dev, &dma_direct_ops); | 
|  | ddw_enabled = true; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* fall back on iommu ops, restore table pointer with ops */ | 
|  | if (!ddw_enabled && get_dma_ops(dev) != &dma_iommu_ops) { | 
|  | dev_info(dev, "Restoring 32-bit DMA via iommu\n"); | 
|  | set_dma_ops(dev, &dma_iommu_ops); | 
|  | pci_dma_dev_setup_pSeriesLP(pdev); | 
|  | } | 
|  |  | 
|  | check_mask: | 
|  | if (!dma_supported(dev, dma_mask)) | 
|  | return -EIO; | 
|  |  | 
|  | *dev->dma_mask = dma_mask; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u64 dma_get_required_mask_pSeriesLP(struct device *dev) | 
|  | { | 
|  | if (!dev->dma_mask) | 
|  | return 0; | 
|  |  | 
|  | if (!disable_ddw && dev_is_pci(dev)) { | 
|  | struct pci_dev *pdev = to_pci_dev(dev); | 
|  | struct device_node *dn; | 
|  |  | 
|  | dn = pci_device_to_OF_node(pdev); | 
|  |  | 
|  | /* search upwards for ibm,dma-window */ | 
|  | for (; dn && PCI_DN(dn) && !PCI_DN(dn)->iommu_table; | 
|  | dn = dn->parent) | 
|  | if (of_get_property(dn, "ibm,dma-window", NULL)) | 
|  | break; | 
|  | /* if there is a ibm,ddw-applicable property require 64 bits */ | 
|  | if (dn && PCI_DN(dn) && | 
|  | of_get_property(dn, "ibm,ddw-applicable", NULL)) | 
|  | return DMA_BIT_MASK(64); | 
|  | } | 
|  |  | 
|  | return dma_iommu_ops.get_required_mask(dev); | 
|  | } | 
|  |  | 
|  | #else  /* CONFIG_PCI */ | 
|  | #define pci_dma_bus_setup_pSeries	NULL | 
|  | #define pci_dma_dev_setup_pSeries	NULL | 
|  | #define pci_dma_bus_setup_pSeriesLP	NULL | 
|  | #define pci_dma_dev_setup_pSeriesLP	NULL | 
|  | #define dma_set_mask_pSeriesLP		NULL | 
|  | #define dma_get_required_mask_pSeriesLP	NULL | 
|  | #endif /* !CONFIG_PCI */ | 
|  |  | 
|  | static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action, | 
|  | void *data) | 
|  | { | 
|  | struct direct_window *window; | 
|  | struct memory_notify *arg = data; | 
|  | int ret = 0; | 
|  |  | 
|  | switch (action) { | 
|  | case MEM_GOING_ONLINE: | 
|  | spin_lock(&direct_window_list_lock); | 
|  | list_for_each_entry(window, &direct_window_list, list) { | 
|  | ret |= tce_setrange_multi_pSeriesLP(arg->start_pfn, | 
|  | arg->nr_pages, window->prop); | 
|  | /* XXX log error */ | 
|  | } | 
|  | spin_unlock(&direct_window_list_lock); | 
|  | break; | 
|  | case MEM_CANCEL_ONLINE: | 
|  | case MEM_OFFLINE: | 
|  | spin_lock(&direct_window_list_lock); | 
|  | list_for_each_entry(window, &direct_window_list, list) { | 
|  | ret |= tce_clearrange_multi_pSeriesLP(arg->start_pfn, | 
|  | arg->nr_pages, window->prop); | 
|  | /* XXX log error */ | 
|  | } | 
|  | spin_unlock(&direct_window_list_lock); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | if (ret && action != MEM_CANCEL_ONLINE) | 
|  | return NOTIFY_BAD; | 
|  |  | 
|  | return NOTIFY_OK; | 
|  | } | 
|  |  | 
|  | static struct notifier_block iommu_mem_nb = { | 
|  | .notifier_call = iommu_mem_notifier, | 
|  | }; | 
|  |  | 
|  | static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *data) | 
|  | { | 
|  | int err = NOTIFY_OK; | 
|  | struct of_reconfig_data *rd = data; | 
|  | struct device_node *np = rd->dn; | 
|  | struct pci_dn *pci = PCI_DN(np); | 
|  | struct direct_window *window; | 
|  |  | 
|  | switch (action) { | 
|  | case OF_RECONFIG_DETACH_NODE: | 
|  | /* | 
|  | * Removing the property will invoke the reconfig | 
|  | * notifier again, which causes dead-lock on the | 
|  | * read-write semaphore of the notifier chain. So | 
|  | * we have to remove the property when releasing | 
|  | * the device node. | 
|  | */ | 
|  | remove_ddw(np, false); | 
|  | if (pci && pci->iommu_table) | 
|  | iommu_free_table(pci->iommu_table, np->full_name); | 
|  |  | 
|  | spin_lock(&direct_window_list_lock); | 
|  | list_for_each_entry(window, &direct_window_list, list) { | 
|  | if (window->device == np) { | 
|  | list_del(&window->list); | 
|  | kfree(window); | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock(&direct_window_list_lock); | 
|  | break; | 
|  | default: | 
|  | err = NOTIFY_DONE; | 
|  | break; | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static struct notifier_block iommu_reconfig_nb = { | 
|  | .notifier_call = iommu_reconfig_notifier, | 
|  | }; | 
|  |  | 
|  | /* These are called very early. */ | 
|  | void iommu_init_early_pSeries(void) | 
|  | { | 
|  | if (of_chosen && of_get_property(of_chosen, "linux,iommu-off", NULL)) | 
|  | return; | 
|  |  | 
|  | if (firmware_has_feature(FW_FEATURE_LPAR)) { | 
|  | if (firmware_has_feature(FW_FEATURE_MULTITCE)) { | 
|  | ppc_md.tce_build = tce_buildmulti_pSeriesLP; | 
|  | ppc_md.tce_free	 = tce_freemulti_pSeriesLP; | 
|  | } else { | 
|  | ppc_md.tce_build = tce_build_pSeriesLP; | 
|  | ppc_md.tce_free	 = tce_free_pSeriesLP; | 
|  | } | 
|  | ppc_md.tce_get   = tce_get_pSeriesLP; | 
|  | pseries_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pSeriesLP; | 
|  | pseries_pci_controller_ops.dma_dev_setup = pci_dma_dev_setup_pSeriesLP; | 
|  | ppc_md.dma_set_mask = dma_set_mask_pSeriesLP; | 
|  | ppc_md.dma_get_required_mask = dma_get_required_mask_pSeriesLP; | 
|  | } else { | 
|  | ppc_md.tce_build = tce_build_pSeries; | 
|  | ppc_md.tce_free  = tce_free_pSeries; | 
|  | ppc_md.tce_get   = tce_get_pseries; | 
|  | pseries_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pSeries; | 
|  | pseries_pci_controller_ops.dma_dev_setup = pci_dma_dev_setup_pSeries; | 
|  | } | 
|  |  | 
|  |  | 
|  | of_reconfig_notifier_register(&iommu_reconfig_nb); | 
|  | register_memory_notifier(&iommu_mem_nb); | 
|  |  | 
|  | set_pci_dma_ops(&dma_iommu_ops); | 
|  | } | 
|  |  | 
|  | static int __init disable_multitce(char *str) | 
|  | { | 
|  | if (strcmp(str, "off") == 0 && | 
|  | firmware_has_feature(FW_FEATURE_LPAR) && | 
|  | firmware_has_feature(FW_FEATURE_MULTITCE)) { | 
|  | printk(KERN_INFO "Disabling MULTITCE firmware feature\n"); | 
|  | ppc_md.tce_build = tce_build_pSeriesLP; | 
|  | ppc_md.tce_free	 = tce_free_pSeriesLP; | 
|  | powerpc_firmware_features &= ~FW_FEATURE_MULTITCE; | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | __setup("multitce=", disable_multitce); | 
|  |  | 
|  | machine_subsys_initcall_sync(pseries, tce_iommu_bus_notifier_init); |