|  | /* | 
|  | * Copyright (c) 2012 Broadcom Corporation | 
|  | * | 
|  | * Permission to use, copy, modify, and/or distribute this software for any | 
|  | * purpose with or without fee is hereby granted, provided that the above | 
|  | * copyright notice and this permission notice appear in all copies. | 
|  | * | 
|  | * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | 
|  | * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | 
|  | * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY | 
|  | * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | 
|  | * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION | 
|  | * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN | 
|  | * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | 
|  | */ | 
|  | #include <linux/slab.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <net/cfg80211.h> | 
|  |  | 
|  | #include <brcmu_wifi.h> | 
|  | #include <brcmu_utils.h> | 
|  | #include <defs.h> | 
|  | #include "core.h" | 
|  | #include "debug.h" | 
|  | #include "fwil.h" | 
|  | #include "fwil_types.h" | 
|  | #include "p2p.h" | 
|  | #include "cfg80211.h" | 
|  |  | 
|  | /* parameters used for p2p escan */ | 
|  | #define P2PAPI_SCAN_NPROBES 1 | 
|  | #define P2PAPI_SCAN_DWELL_TIME_MS 80 | 
|  | #define P2PAPI_SCAN_SOCIAL_DWELL_TIME_MS 40 | 
|  | #define P2PAPI_SCAN_HOME_TIME_MS 60 | 
|  | #define P2PAPI_SCAN_NPROBS_TIME_MS 30 | 
|  | #define P2PAPI_SCAN_AF_SEARCH_DWELL_TIME_MS 100 | 
|  | #define WL_SCAN_CONNECT_DWELL_TIME_MS 200 | 
|  | #define WL_SCAN_JOIN_PROBE_INTERVAL_MS 20 | 
|  |  | 
|  | #define BRCMF_P2P_WILDCARD_SSID		"DIRECT-" | 
|  | #define BRCMF_P2P_WILDCARD_SSID_LEN	(sizeof(BRCMF_P2P_WILDCARD_SSID) - 1) | 
|  |  | 
|  | #define SOCIAL_CHAN_1		1 | 
|  | #define SOCIAL_CHAN_2		6 | 
|  | #define SOCIAL_CHAN_3		11 | 
|  | #define IS_P2P_SOCIAL_CHANNEL(channel) ((channel == SOCIAL_CHAN_1) || \ | 
|  | (channel == SOCIAL_CHAN_2) || \ | 
|  | (channel == SOCIAL_CHAN_3)) | 
|  | #define BRCMF_P2P_TEMP_CHAN	SOCIAL_CHAN_3 | 
|  | #define SOCIAL_CHAN_CNT		3 | 
|  | #define AF_PEER_SEARCH_CNT	2 | 
|  |  | 
|  | #define BRCMF_SCB_TIMEOUT_VALUE	20 | 
|  |  | 
|  | #define P2P_VER			9	/* P2P version: 9=WiFi P2P v1.0 */ | 
|  | #define P2P_PUB_AF_CATEGORY	0x04 | 
|  | #define P2P_PUB_AF_ACTION	0x09 | 
|  | #define P2P_AF_CATEGORY		0x7f | 
|  | #define P2P_OUI			"\x50\x6F\x9A"	/* P2P OUI */ | 
|  | #define P2P_OUI_LEN		3		/* P2P OUI length */ | 
|  |  | 
|  | /* Action Frame Constants */ | 
|  | #define DOT11_ACTION_HDR_LEN	2	/* action frame category + action */ | 
|  | #define DOT11_ACTION_CAT_OFF	0	/* category offset */ | 
|  | #define DOT11_ACTION_ACT_OFF	1	/* action offset */ | 
|  |  | 
|  | #define P2P_AF_DWELL_TIME		200 | 
|  | #define P2P_AF_MIN_DWELL_TIME		100 | 
|  | #define P2P_AF_MED_DWELL_TIME		400 | 
|  | #define P2P_AF_LONG_DWELL_TIME		1000 | 
|  | #define P2P_AF_TX_MAX_RETRY		1 | 
|  | #define P2P_AF_MAX_WAIT_TIME		2000 | 
|  | #define P2P_INVALID_CHANNEL		-1 | 
|  | #define P2P_CHANNEL_SYNC_RETRY		5 | 
|  | #define P2P_AF_FRM_SCAN_MAX_WAIT	1500 | 
|  | #define P2P_DEFAULT_SLEEP_TIME_VSDB	200 | 
|  |  | 
|  | /* WiFi P2P Public Action Frame OUI Subtypes */ | 
|  | #define P2P_PAF_GON_REQ		0	/* Group Owner Negotiation Req */ | 
|  | #define P2P_PAF_GON_RSP		1	/* Group Owner Negotiation Rsp */ | 
|  | #define P2P_PAF_GON_CONF	2	/* Group Owner Negotiation Confirm */ | 
|  | #define P2P_PAF_INVITE_REQ	3	/* P2P Invitation Request */ | 
|  | #define P2P_PAF_INVITE_RSP	4	/* P2P Invitation Response */ | 
|  | #define P2P_PAF_DEVDIS_REQ	5	/* Device Discoverability Request */ | 
|  | #define P2P_PAF_DEVDIS_RSP	6	/* Device Discoverability Response */ | 
|  | #define P2P_PAF_PROVDIS_REQ	7	/* Provision Discovery Request */ | 
|  | #define P2P_PAF_PROVDIS_RSP	8	/* Provision Discovery Response */ | 
|  | #define P2P_PAF_SUBTYPE_INVALID	255	/* Invalid Subtype */ | 
|  |  | 
|  | /* WiFi P2P Action Frame OUI Subtypes */ | 
|  | #define P2P_AF_NOTICE_OF_ABSENCE	0	/* Notice of Absence */ | 
|  | #define P2P_AF_PRESENCE_REQ		1	/* P2P Presence Request */ | 
|  | #define P2P_AF_PRESENCE_RSP		2	/* P2P Presence Response */ | 
|  | #define P2P_AF_GO_DISC_REQ		3	/* GO Discoverability Request */ | 
|  |  | 
|  | /* P2P Service Discovery related */ | 
|  | #define P2PSD_ACTION_CATEGORY		0x04	/* Public action frame */ | 
|  | #define P2PSD_ACTION_ID_GAS_IREQ	0x0a	/* GAS Initial Request AF */ | 
|  | #define P2PSD_ACTION_ID_GAS_IRESP	0x0b	/* GAS Initial Response AF */ | 
|  | #define P2PSD_ACTION_ID_GAS_CREQ	0x0c	/* GAS Comback Request AF */ | 
|  | #define P2PSD_ACTION_ID_GAS_CRESP	0x0d	/* GAS Comback Response AF */ | 
|  |  | 
|  | /** | 
|  | * struct brcmf_p2p_disc_st_le - set discovery state in firmware. | 
|  | * | 
|  | * @state: requested discovery state (see enum brcmf_p2p_disc_state). | 
|  | * @chspec: channel parameter for %WL_P2P_DISC_ST_LISTEN state. | 
|  | * @dwell: dwell time in ms for %WL_P2P_DISC_ST_LISTEN state. | 
|  | */ | 
|  | struct brcmf_p2p_disc_st_le { | 
|  | u8 state; | 
|  | __le16 chspec; | 
|  | __le16 dwell; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * enum brcmf_p2p_disc_state - P2P discovery state values | 
|  | * | 
|  | * @WL_P2P_DISC_ST_SCAN: P2P discovery with wildcard SSID and P2P IE. | 
|  | * @WL_P2P_DISC_ST_LISTEN: P2P discovery off-channel for specified time. | 
|  | * @WL_P2P_DISC_ST_SEARCH: P2P discovery with P2P wildcard SSID and P2P IE. | 
|  | */ | 
|  | enum brcmf_p2p_disc_state { | 
|  | WL_P2P_DISC_ST_SCAN, | 
|  | WL_P2P_DISC_ST_LISTEN, | 
|  | WL_P2P_DISC_ST_SEARCH | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * struct brcmf_p2p_scan_le - P2P specific scan request. | 
|  | * | 
|  | * @type: type of scan method requested (values: 'E' or 'S'). | 
|  | * @reserved: reserved (ignored). | 
|  | * @eparams: parameters used for type 'E'. | 
|  | * @sparams: parameters used for type 'S'. | 
|  | */ | 
|  | struct brcmf_p2p_scan_le { | 
|  | u8 type; | 
|  | u8 reserved[3]; | 
|  | union { | 
|  | struct brcmf_escan_params_le eparams; | 
|  | struct brcmf_scan_params_le sparams; | 
|  | }; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * struct brcmf_p2p_pub_act_frame - WiFi P2P Public Action Frame | 
|  | * | 
|  | * @category: P2P_PUB_AF_CATEGORY | 
|  | * @action: P2P_PUB_AF_ACTION | 
|  | * @oui[3]: P2P_OUI | 
|  | * @oui_type: OUI type - P2P_VER | 
|  | * @subtype: OUI subtype - P2P_TYPE_* | 
|  | * @dialog_token: nonzero, identifies req/rsp transaction | 
|  | * @elts[1]: Variable length information elements. | 
|  | */ | 
|  | struct brcmf_p2p_pub_act_frame { | 
|  | u8	category; | 
|  | u8	action; | 
|  | u8	oui[3]; | 
|  | u8	oui_type; | 
|  | u8	subtype; | 
|  | u8	dialog_token; | 
|  | u8	elts[1]; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * struct brcmf_p2p_action_frame - WiFi P2P Action Frame | 
|  | * | 
|  | * @category: P2P_AF_CATEGORY | 
|  | * @OUI[3]: OUI - P2P_OUI | 
|  | * @type: OUI Type - P2P_VER | 
|  | * @subtype: OUI Subtype - P2P_AF_* | 
|  | * @dialog_token: nonzero, identifies req/resp tranaction | 
|  | * @elts[1]: Variable length information elements. | 
|  | */ | 
|  | struct brcmf_p2p_action_frame { | 
|  | u8	category; | 
|  | u8	oui[3]; | 
|  | u8	type; | 
|  | u8	subtype; | 
|  | u8	dialog_token; | 
|  | u8	elts[1]; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * struct brcmf_p2psd_gas_pub_act_frame - Wi-Fi GAS Public Action Frame | 
|  | * | 
|  | * @category: 0x04 Public Action Frame | 
|  | * @action: 0x6c Advertisement Protocol | 
|  | * @dialog_token: nonzero, identifies req/rsp transaction | 
|  | * @query_data[1]: Query Data. SD gas ireq SD gas iresp | 
|  | */ | 
|  | struct brcmf_p2psd_gas_pub_act_frame { | 
|  | u8	category; | 
|  | u8	action; | 
|  | u8	dialog_token; | 
|  | u8	query_data[1]; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * struct brcmf_config_af_params - Action Frame Parameters for tx. | 
|  | * | 
|  | * @mpc_onoff: To make sure to send successfully action frame, we have to | 
|  | *             turn off mpc  0: off, 1: on,  (-1): do nothing | 
|  | * @search_channel: 1: search peer's channel to send af | 
|  | * extra_listen: keep the dwell time to get af response frame. | 
|  | */ | 
|  | struct brcmf_config_af_params { | 
|  | s32 mpc_onoff; | 
|  | bool search_channel; | 
|  | bool extra_listen; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_is_pub_action() - true if p2p public type frame. | 
|  | * | 
|  | * @frame: action frame data. | 
|  | * @frame_len: length of action frame data. | 
|  | * | 
|  | * Determine if action frame is p2p public action type | 
|  | */ | 
|  | static bool brcmf_p2p_is_pub_action(void *frame, u32 frame_len) | 
|  | { | 
|  | struct brcmf_p2p_pub_act_frame *pact_frm; | 
|  |  | 
|  | if (frame == NULL) | 
|  | return false; | 
|  |  | 
|  | pact_frm = (struct brcmf_p2p_pub_act_frame *)frame; | 
|  | if (frame_len < sizeof(struct brcmf_p2p_pub_act_frame) - 1) | 
|  | return false; | 
|  |  | 
|  | if (pact_frm->category == P2P_PUB_AF_CATEGORY && | 
|  | pact_frm->action == P2P_PUB_AF_ACTION && | 
|  | pact_frm->oui_type == P2P_VER && | 
|  | memcmp(pact_frm->oui, P2P_OUI, P2P_OUI_LEN) == 0) | 
|  | return true; | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_is_p2p_action() - true if p2p action type frame. | 
|  | * | 
|  | * @frame: action frame data. | 
|  | * @frame_len: length of action frame data. | 
|  | * | 
|  | * Determine if action frame is p2p action type | 
|  | */ | 
|  | static bool brcmf_p2p_is_p2p_action(void *frame, u32 frame_len) | 
|  | { | 
|  | struct brcmf_p2p_action_frame *act_frm; | 
|  |  | 
|  | if (frame == NULL) | 
|  | return false; | 
|  |  | 
|  | act_frm = (struct brcmf_p2p_action_frame *)frame; | 
|  | if (frame_len < sizeof(struct brcmf_p2p_action_frame) - 1) | 
|  | return false; | 
|  |  | 
|  | if (act_frm->category == P2P_AF_CATEGORY && | 
|  | act_frm->type  == P2P_VER && | 
|  | memcmp(act_frm->oui, P2P_OUI, P2P_OUI_LEN) == 0) | 
|  | return true; | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_is_gas_action() - true if p2p gas action type frame. | 
|  | * | 
|  | * @frame: action frame data. | 
|  | * @frame_len: length of action frame data. | 
|  | * | 
|  | * Determine if action frame is p2p gas action type | 
|  | */ | 
|  | static bool brcmf_p2p_is_gas_action(void *frame, u32 frame_len) | 
|  | { | 
|  | struct brcmf_p2psd_gas_pub_act_frame *sd_act_frm; | 
|  |  | 
|  | if (frame == NULL) | 
|  | return false; | 
|  |  | 
|  | sd_act_frm = (struct brcmf_p2psd_gas_pub_act_frame *)frame; | 
|  | if (frame_len < sizeof(struct brcmf_p2psd_gas_pub_act_frame) - 1) | 
|  | return false; | 
|  |  | 
|  | if (sd_act_frm->category != P2PSD_ACTION_CATEGORY) | 
|  | return false; | 
|  |  | 
|  | if (sd_act_frm->action == P2PSD_ACTION_ID_GAS_IREQ || | 
|  | sd_act_frm->action == P2PSD_ACTION_ID_GAS_IRESP || | 
|  | sd_act_frm->action == P2PSD_ACTION_ID_GAS_CREQ || | 
|  | sd_act_frm->action == P2PSD_ACTION_ID_GAS_CRESP) | 
|  | return true; | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_print_actframe() - debug print routine. | 
|  | * | 
|  | * @tx: Received or to be transmitted | 
|  | * @frame: action frame data. | 
|  | * @frame_len: length of action frame data. | 
|  | * | 
|  | * Print information about the p2p action frame | 
|  | */ | 
|  |  | 
|  | #ifdef DEBUG | 
|  |  | 
|  | static void brcmf_p2p_print_actframe(bool tx, void *frame, u32 frame_len) | 
|  | { | 
|  | struct brcmf_p2p_pub_act_frame *pact_frm; | 
|  | struct brcmf_p2p_action_frame *act_frm; | 
|  | struct brcmf_p2psd_gas_pub_act_frame *sd_act_frm; | 
|  |  | 
|  | if (!frame || frame_len <= 2) | 
|  | return; | 
|  |  | 
|  | if (brcmf_p2p_is_pub_action(frame, frame_len)) { | 
|  | pact_frm = (struct brcmf_p2p_pub_act_frame *)frame; | 
|  | switch (pact_frm->subtype) { | 
|  | case P2P_PAF_GON_REQ: | 
|  | brcmf_dbg(TRACE, "%s P2P Group Owner Negotiation Req Frame\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | case P2P_PAF_GON_RSP: | 
|  | brcmf_dbg(TRACE, "%s P2P Group Owner Negotiation Rsp Frame\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | case P2P_PAF_GON_CONF: | 
|  | brcmf_dbg(TRACE, "%s P2P Group Owner Negotiation Confirm Frame\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | case P2P_PAF_INVITE_REQ: | 
|  | brcmf_dbg(TRACE, "%s P2P Invitation Request  Frame\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | case P2P_PAF_INVITE_RSP: | 
|  | brcmf_dbg(TRACE, "%s P2P Invitation Response Frame\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | case P2P_PAF_DEVDIS_REQ: | 
|  | brcmf_dbg(TRACE, "%s P2P Device Discoverability Request Frame\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | case P2P_PAF_DEVDIS_RSP: | 
|  | brcmf_dbg(TRACE, "%s P2P Device Discoverability Response Frame\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | case P2P_PAF_PROVDIS_REQ: | 
|  | brcmf_dbg(TRACE, "%s P2P Provision Discovery Request Frame\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | case P2P_PAF_PROVDIS_RSP: | 
|  | brcmf_dbg(TRACE, "%s P2P Provision Discovery Response Frame\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | default: | 
|  | brcmf_dbg(TRACE, "%s Unknown P2P Public Action Frame\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | } | 
|  | } else if (brcmf_p2p_is_p2p_action(frame, frame_len)) { | 
|  | act_frm = (struct brcmf_p2p_action_frame *)frame; | 
|  | switch (act_frm->subtype) { | 
|  | case P2P_AF_NOTICE_OF_ABSENCE: | 
|  | brcmf_dbg(TRACE, "%s P2P Notice of Absence Frame\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | case P2P_AF_PRESENCE_REQ: | 
|  | brcmf_dbg(TRACE, "%s P2P Presence Request Frame\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | case P2P_AF_PRESENCE_RSP: | 
|  | brcmf_dbg(TRACE, "%s P2P Presence Response Frame\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | case P2P_AF_GO_DISC_REQ: | 
|  | brcmf_dbg(TRACE, "%s P2P Discoverability Request Frame\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | default: | 
|  | brcmf_dbg(TRACE, "%s Unknown P2P Action Frame\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | } | 
|  |  | 
|  | } else if (brcmf_p2p_is_gas_action(frame, frame_len)) { | 
|  | sd_act_frm = (struct brcmf_p2psd_gas_pub_act_frame *)frame; | 
|  | switch (sd_act_frm->action) { | 
|  | case P2PSD_ACTION_ID_GAS_IREQ: | 
|  | brcmf_dbg(TRACE, "%s P2P GAS Initial Request\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | case P2PSD_ACTION_ID_GAS_IRESP: | 
|  | brcmf_dbg(TRACE, "%s P2P GAS Initial Response\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | case P2PSD_ACTION_ID_GAS_CREQ: | 
|  | brcmf_dbg(TRACE, "%s P2P GAS Comback Request\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | case P2PSD_ACTION_ID_GAS_CRESP: | 
|  | brcmf_dbg(TRACE, "%s P2P GAS Comback Response\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | default: | 
|  | brcmf_dbg(TRACE, "%s Unknown P2P GAS Frame\n", | 
|  | (tx) ? "TX" : "RX"); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | static void brcmf_p2p_print_actframe(bool tx, void *frame, u32 frame_len) | 
|  | { | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_set_firmware() - prepare firmware for peer-to-peer operation. | 
|  | * | 
|  | * @ifp: ifp to use for iovars (primary). | 
|  | * @p2p_mac: mac address to configure for p2p_da_override | 
|  | */ | 
|  | static int brcmf_p2p_set_firmware(struct brcmf_if *ifp, u8 *p2p_mac) | 
|  | { | 
|  | s32 ret = 0; | 
|  |  | 
|  | brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1); | 
|  | brcmf_fil_iovar_int_set(ifp, "apsta", 1); | 
|  | brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1); | 
|  |  | 
|  | /* In case of COB type, firmware has default mac address | 
|  | * After Initializing firmware, we have to set current mac address to | 
|  | * firmware for P2P device address. This must be done with discovery | 
|  | * disabled. | 
|  | */ | 
|  | brcmf_fil_iovar_int_set(ifp, "p2p_disc", 0); | 
|  |  | 
|  | ret = brcmf_fil_iovar_data_set(ifp, "p2p_da_override", p2p_mac, | 
|  | ETH_ALEN); | 
|  | if (ret) | 
|  | brcmf_err("failed to update device address ret %d\n", ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_generate_bss_mac() - derive mac addresses for P2P. | 
|  | * | 
|  | * @p2p: P2P specific data. | 
|  | * @dev_addr: optional device address. | 
|  | * | 
|  | * P2P needs mac addresses for P2P device and interface. If no device | 
|  | * address it specified, these are derived from the primary net device, ie. | 
|  | * the permanent ethernet address of the device. | 
|  | */ | 
|  | static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p, u8 *dev_addr) | 
|  | { | 
|  | struct brcmf_if *pri_ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; | 
|  | bool local_admin = false; | 
|  |  | 
|  | if (!dev_addr || is_zero_ether_addr(dev_addr)) { | 
|  | dev_addr = pri_ifp->mac_addr; | 
|  | local_admin = true; | 
|  | } | 
|  |  | 
|  | /* Generate the P2P Device Address.  This consists of the device's | 
|  | * primary MAC address with the locally administered bit set. | 
|  | */ | 
|  | memcpy(p2p->dev_addr, dev_addr, ETH_ALEN); | 
|  | if (local_admin) | 
|  | p2p->dev_addr[0] |= 0x02; | 
|  |  | 
|  | /* Generate the P2P Interface Address.  If the discovery and connection | 
|  | * BSSCFGs need to simultaneously co-exist, then this address must be | 
|  | * different from the P2P Device Address, but also locally administered. | 
|  | */ | 
|  | memcpy(p2p->int_addr, p2p->dev_addr, ETH_ALEN); | 
|  | p2p->int_addr[0] |= 0x02; | 
|  | p2p->int_addr[4] ^= 0x80; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_scan_is_p2p_request() - is cfg80211 scan request a P2P scan. | 
|  | * | 
|  | * @request: the scan request as received from cfg80211. | 
|  | * | 
|  | * returns true if one of the ssids in the request matches the | 
|  | * P2P wildcard ssid; otherwise returns false. | 
|  | */ | 
|  | static bool brcmf_p2p_scan_is_p2p_request(struct cfg80211_scan_request *request) | 
|  | { | 
|  | struct cfg80211_ssid *ssids = request->ssids; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < request->n_ssids; i++) { | 
|  | if (ssids[i].ssid_len != BRCMF_P2P_WILDCARD_SSID_LEN) | 
|  | continue; | 
|  |  | 
|  | brcmf_dbg(INFO, "comparing ssid \"%s\"", ssids[i].ssid); | 
|  | if (!memcmp(BRCMF_P2P_WILDCARD_SSID, ssids[i].ssid, | 
|  | BRCMF_P2P_WILDCARD_SSID_LEN)) | 
|  | return true; | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_set_discover_state - set discover state in firmware. | 
|  | * | 
|  | * @ifp: low-level interface object. | 
|  | * @state: discover state to set. | 
|  | * @chanspec: channel parameters (for state @WL_P2P_DISC_ST_LISTEN only). | 
|  | * @listen_ms: duration to listen (for state @WL_P2P_DISC_ST_LISTEN only). | 
|  | */ | 
|  | static s32 brcmf_p2p_set_discover_state(struct brcmf_if *ifp, u8 state, | 
|  | u16 chanspec, u16 listen_ms) | 
|  | { | 
|  | struct brcmf_p2p_disc_st_le discover_state; | 
|  | s32 ret = 0; | 
|  | brcmf_dbg(TRACE, "enter\n"); | 
|  |  | 
|  | discover_state.state = state; | 
|  | discover_state.chspec = cpu_to_le16(chanspec); | 
|  | discover_state.dwell = cpu_to_le16(listen_ms); | 
|  | ret = brcmf_fil_bsscfg_data_set(ifp, "p2p_state", &discover_state, | 
|  | sizeof(discover_state)); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_deinit_discovery() - disable P2P device discovery. | 
|  | * | 
|  | * @p2p: P2P specific data. | 
|  | * | 
|  | * Resets the discovery state and disables it in firmware. | 
|  | */ | 
|  | static s32 brcmf_p2p_deinit_discovery(struct brcmf_p2p_info *p2p) | 
|  | { | 
|  | struct brcmf_cfg80211_vif *vif; | 
|  |  | 
|  | brcmf_dbg(TRACE, "enter\n"); | 
|  |  | 
|  | /* Set the discovery state to SCAN */ | 
|  | vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; | 
|  | (void)brcmf_p2p_set_discover_state(vif->ifp, WL_P2P_DISC_ST_SCAN, 0, 0); | 
|  |  | 
|  | /* Disable P2P discovery in the firmware */ | 
|  | vif = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif; | 
|  | (void)brcmf_fil_iovar_int_set(vif->ifp, "p2p_disc", 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_enable_discovery() - initialize and configure discovery. | 
|  | * | 
|  | * @p2p: P2P specific data. | 
|  | * | 
|  | * Initializes the discovery device and configure the virtual interface. | 
|  | */ | 
|  | static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p) | 
|  | { | 
|  | struct brcmf_cfg80211_vif *vif; | 
|  | s32 ret = 0; | 
|  |  | 
|  | brcmf_dbg(TRACE, "enter\n"); | 
|  | vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; | 
|  | if (!vif) { | 
|  | brcmf_err("P2P config device not available\n"); | 
|  | ret = -EPERM; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if (test_bit(BRCMF_P2P_STATUS_ENABLED, &p2p->status)) { | 
|  | brcmf_dbg(INFO, "P2P config device already configured\n"); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | /* Re-initialize P2P Discovery in the firmware */ | 
|  | vif = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif; | 
|  | ret = brcmf_fil_iovar_int_set(vif->ifp, "p2p_disc", 1); | 
|  | if (ret < 0) { | 
|  | brcmf_err("set p2p_disc error\n"); | 
|  | goto exit; | 
|  | } | 
|  | vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; | 
|  | ret = brcmf_p2p_set_discover_state(vif->ifp, WL_P2P_DISC_ST_SCAN, 0, 0); | 
|  | if (ret < 0) { | 
|  | brcmf_err("unable to set WL_P2P_DISC_ST_SCAN\n"); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Set wsec to any non-zero value in the discovery bsscfg | 
|  | * to ensure our P2P probe responses have the privacy bit | 
|  | * set in the 802.11 WPA IE. Some peer devices may not | 
|  | * initiate WPS with us if this bit is not set. | 
|  | */ | 
|  | ret = brcmf_fil_bsscfg_int_set(vif->ifp, "wsec", AES_ENABLED); | 
|  | if (ret < 0) { | 
|  | brcmf_err("wsec error %d\n", ret); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | set_bit(BRCMF_P2P_STATUS_ENABLED, &p2p->status); | 
|  | exit: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_escan() - initiate a P2P scan. | 
|  | * | 
|  | * @p2p: P2P specific data. | 
|  | * @num_chans: number of channels to scan. | 
|  | * @chanspecs: channel parameters for @num_chans channels. | 
|  | * @search_state: P2P discover state to use. | 
|  | * @action: scan action to pass to firmware. | 
|  | * @bss_type: type of P2P bss. | 
|  | */ | 
|  | static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans, | 
|  | u16 chanspecs[], s32 search_state, u16 action, | 
|  | enum p2p_bss_type bss_type) | 
|  | { | 
|  | s32 ret = 0; | 
|  | s32 memsize = offsetof(struct brcmf_p2p_scan_le, | 
|  | eparams.params_le.channel_list); | 
|  | s32 nprobes; | 
|  | s32 active; | 
|  | u32 i; | 
|  | u8 *memblk; | 
|  | struct brcmf_cfg80211_vif *vif; | 
|  | struct brcmf_p2p_scan_le *p2p_params; | 
|  | struct brcmf_scan_params_le *sparams; | 
|  | struct brcmf_ssid ssid; | 
|  |  | 
|  | memsize += num_chans * sizeof(__le16); | 
|  | memblk = kzalloc(memsize, GFP_KERNEL); | 
|  | if (!memblk) | 
|  | return -ENOMEM; | 
|  |  | 
|  | vif = p2p->bss_idx[bss_type].vif; | 
|  | if (vif == NULL) { | 
|  | brcmf_err("no vif for bss type %d\n", bss_type); | 
|  | ret = -EINVAL; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | switch (search_state) { | 
|  | case WL_P2P_DISC_ST_SEARCH: | 
|  | /* | 
|  | * If we in SEARCH STATE, we don't need to set SSID explictly | 
|  | * because dongle use P2P WILDCARD internally by default | 
|  | */ | 
|  | /* use null ssid */ | 
|  | ssid.SSID_len = 0; | 
|  | memset(ssid.SSID, 0, sizeof(ssid.SSID)); | 
|  | break; | 
|  | case WL_P2P_DISC_ST_SCAN: | 
|  | /* | 
|  | * wpa_supplicant has p2p_find command with type social or | 
|  | * progressive. For progressive, we need to set the ssid to | 
|  | * P2P WILDCARD because we just do broadcast scan unless | 
|  | * setting SSID. | 
|  | */ | 
|  | ssid.SSID_len = BRCMF_P2P_WILDCARD_SSID_LEN; | 
|  | memcpy(ssid.SSID, BRCMF_P2P_WILDCARD_SSID, ssid.SSID_len); | 
|  | break; | 
|  | default: | 
|  | brcmf_err(" invalid search state %d\n", search_state); | 
|  | ret = -EINVAL; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | brcmf_p2p_set_discover_state(vif->ifp, search_state, 0, 0); | 
|  |  | 
|  | /* | 
|  | * set p2p scan parameters. | 
|  | */ | 
|  | p2p_params = (struct brcmf_p2p_scan_le *)memblk; | 
|  | p2p_params->type = 'E'; | 
|  |  | 
|  | /* determine the scan engine parameters */ | 
|  | sparams = &p2p_params->eparams.params_le; | 
|  | sparams->bss_type = DOT11_BSSTYPE_ANY; | 
|  | if (p2p->cfg->active_scan) | 
|  | sparams->scan_type = 0; | 
|  | else | 
|  | sparams->scan_type = 1; | 
|  |  | 
|  | eth_broadcast_addr(sparams->bssid); | 
|  | if (ssid.SSID_len) | 
|  | memcpy(sparams->ssid_le.SSID, ssid.SSID, ssid.SSID_len); | 
|  | sparams->ssid_le.SSID_len = cpu_to_le32(ssid.SSID_len); | 
|  | sparams->home_time = cpu_to_le32(P2PAPI_SCAN_HOME_TIME_MS); | 
|  |  | 
|  | /* | 
|  | * SOCIAL_CHAN_CNT + 1 takes care of the Progressive scan | 
|  | * supported by the supplicant. | 
|  | */ | 
|  | if (num_chans == SOCIAL_CHAN_CNT || num_chans == (SOCIAL_CHAN_CNT + 1)) | 
|  | active = P2PAPI_SCAN_SOCIAL_DWELL_TIME_MS; | 
|  | else if (num_chans == AF_PEER_SEARCH_CNT) | 
|  | active = P2PAPI_SCAN_AF_SEARCH_DWELL_TIME_MS; | 
|  | else if (brcmf_get_vif_state_any(p2p->cfg, BRCMF_VIF_STATUS_CONNECTED)) | 
|  | active = -1; | 
|  | else | 
|  | active = P2PAPI_SCAN_DWELL_TIME_MS; | 
|  |  | 
|  | /* Override scan params to find a peer for a connection */ | 
|  | if (num_chans == 1) { | 
|  | active = WL_SCAN_CONNECT_DWELL_TIME_MS; | 
|  | /* WAR to sync with presence period of VSDB GO. | 
|  | * send probe request more frequently | 
|  | */ | 
|  | nprobes = active / WL_SCAN_JOIN_PROBE_INTERVAL_MS; | 
|  | } else { | 
|  | nprobes = active / P2PAPI_SCAN_NPROBS_TIME_MS; | 
|  | } | 
|  |  | 
|  | if (nprobes <= 0) | 
|  | nprobes = 1; | 
|  |  | 
|  | brcmf_dbg(INFO, "nprobes # %d, active_time %d\n", nprobes, active); | 
|  | sparams->active_time = cpu_to_le32(active); | 
|  | sparams->nprobes = cpu_to_le32(nprobes); | 
|  | sparams->passive_time = cpu_to_le32(-1); | 
|  | sparams->channel_num = cpu_to_le32(num_chans & | 
|  | BRCMF_SCAN_PARAMS_COUNT_MASK); | 
|  | for (i = 0; i < num_chans; i++) | 
|  | sparams->channel_list[i] = cpu_to_le16(chanspecs[i]); | 
|  |  | 
|  | /* set the escan specific parameters */ | 
|  | p2p_params->eparams.version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION); | 
|  | p2p_params->eparams.action =  cpu_to_le16(action); | 
|  | p2p_params->eparams.sync_id = cpu_to_le16(0x1234); | 
|  | /* perform p2p scan on primary device */ | 
|  | ret = brcmf_fil_bsscfg_data_set(vif->ifp, "p2p_scan", memblk, memsize); | 
|  | if (!ret) | 
|  | set_bit(BRCMF_SCAN_STATUS_BUSY, &p2p->cfg->scan_status); | 
|  | exit: | 
|  | kfree(memblk); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_run_escan() - escan callback for peer-to-peer. | 
|  | * | 
|  | * @cfg: driver private data for cfg80211 interface. | 
|  | * @ndev: net device for which scan is requested. | 
|  | * @request: scan request from cfg80211. | 
|  | * @action: scan action. | 
|  | * | 
|  | * Determines the P2P discovery state based to scan request parameters and | 
|  | * validates the channels in the request. | 
|  | */ | 
|  | static s32 brcmf_p2p_run_escan(struct brcmf_cfg80211_info *cfg, | 
|  | struct brcmf_if *ifp, | 
|  | struct cfg80211_scan_request *request, | 
|  | u16 action) | 
|  | { | 
|  | struct brcmf_p2p_info *p2p = &cfg->p2p; | 
|  | s32 err = 0; | 
|  | s32 search_state = WL_P2P_DISC_ST_SCAN; | 
|  | struct brcmf_cfg80211_vif *vif; | 
|  | struct net_device *dev = NULL; | 
|  | int i, num_nodfs = 0; | 
|  | u16 *chanspecs; | 
|  |  | 
|  | brcmf_dbg(TRACE, "enter\n"); | 
|  |  | 
|  | if (!request) { | 
|  | err = -EINVAL; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if (request->n_channels) { | 
|  | chanspecs = kcalloc(request->n_channels, sizeof(*chanspecs), | 
|  | GFP_KERNEL); | 
|  | if (!chanspecs) { | 
|  | err = -ENOMEM; | 
|  | goto exit; | 
|  | } | 
|  | vif = p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif; | 
|  | if (vif) | 
|  | dev = vif->wdev.netdev; | 
|  | if (request->n_channels == 3 && | 
|  | request->channels[0]->hw_value == SOCIAL_CHAN_1 && | 
|  | request->channels[1]->hw_value == SOCIAL_CHAN_2 && | 
|  | request->channels[2]->hw_value == SOCIAL_CHAN_3) { | 
|  | /* SOCIAL CHANNELS 1, 6, 11 */ | 
|  | search_state = WL_P2P_DISC_ST_SEARCH; | 
|  | brcmf_dbg(INFO, "P2P SEARCH PHASE START\n"); | 
|  | } else if (dev != NULL && | 
|  | vif->wdev.iftype == NL80211_IFTYPE_P2P_GO) { | 
|  | /* If you are already a GO, then do SEARCH only */ | 
|  | brcmf_dbg(INFO, "Already a GO. Do SEARCH Only\n"); | 
|  | search_state = WL_P2P_DISC_ST_SEARCH; | 
|  | } else { | 
|  | brcmf_dbg(INFO, "P2P SCAN STATE START\n"); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * no P2P scanning on passive or DFS channels. | 
|  | */ | 
|  | for (i = 0; i < request->n_channels; i++) { | 
|  | struct ieee80211_channel *chan = request->channels[i]; | 
|  |  | 
|  | if (chan->flags & (IEEE80211_CHAN_RADAR | | 
|  | IEEE80211_CHAN_NO_IR)) | 
|  | continue; | 
|  |  | 
|  | chanspecs[i] = channel_to_chanspec(&p2p->cfg->d11inf, | 
|  | chan); | 
|  | brcmf_dbg(INFO, "%d: chan=%d, channel spec=%x\n", | 
|  | num_nodfs, chan->hw_value, chanspecs[i]); | 
|  | num_nodfs++; | 
|  | } | 
|  | err = brcmf_p2p_escan(p2p, num_nodfs, chanspecs, search_state, | 
|  | action, P2PAPI_BSSCFG_DEVICE); | 
|  | kfree(chanspecs); | 
|  | } | 
|  | exit: | 
|  | if (err) | 
|  | brcmf_err("error (%d)\n", err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_find_listen_channel() - find listen channel in ie string. | 
|  | * | 
|  | * @ie: string of information elements. | 
|  | * @ie_len: length of string. | 
|  | * | 
|  | * Scan ie for p2p ie and look for attribute 6 channel. If available determine | 
|  | * channel and return it. | 
|  | */ | 
|  | static s32 brcmf_p2p_find_listen_channel(const u8 *ie, u32 ie_len) | 
|  | { | 
|  | u8 channel_ie[5]; | 
|  | s32 listen_channel; | 
|  | s32 err; | 
|  |  | 
|  | err = cfg80211_get_p2p_attr(ie, ie_len, | 
|  | IEEE80211_P2P_ATTR_LISTEN_CHANNEL, | 
|  | channel_ie, sizeof(channel_ie)); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | /* listen channel subel length format:     */ | 
|  | /* 3(country) + 1(op. class) + 1(chan num) */ | 
|  | listen_channel = (s32)channel_ie[3 + 1]; | 
|  |  | 
|  | if (listen_channel == SOCIAL_CHAN_1 || | 
|  | listen_channel == SOCIAL_CHAN_2 || | 
|  | listen_channel == SOCIAL_CHAN_3) { | 
|  | brcmf_dbg(INFO, "Found my Listen Channel %d\n", listen_channel); | 
|  | return listen_channel; | 
|  | } | 
|  |  | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_scan_prep() - prepare scan based on request. | 
|  | * | 
|  | * @wiphy: wiphy device. | 
|  | * @request: scan request from cfg80211. | 
|  | * @vif: vif on which scan request is to be executed. | 
|  | * | 
|  | * Prepare the scan appropriately for type of scan requested. Overrides the | 
|  | * escan .run() callback for peer-to-peer scanning. | 
|  | */ | 
|  | int brcmf_p2p_scan_prep(struct wiphy *wiphy, | 
|  | struct cfg80211_scan_request *request, | 
|  | struct brcmf_cfg80211_vif *vif) | 
|  | { | 
|  | struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); | 
|  | struct brcmf_p2p_info *p2p = &cfg->p2p; | 
|  | int err = 0; | 
|  |  | 
|  | if (brcmf_p2p_scan_is_p2p_request(request)) { | 
|  | /* find my listen channel */ | 
|  | err = brcmf_p2p_find_listen_channel(request->ie, | 
|  | request->ie_len); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | p2p->afx_hdl.my_listen_chan = err; | 
|  |  | 
|  | clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); | 
|  | brcmf_dbg(INFO, "P2P: GO_NEG_PHASE status cleared\n"); | 
|  |  | 
|  | err = brcmf_p2p_enable_discovery(p2p); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; | 
|  |  | 
|  | /* override .run_escan() callback. */ | 
|  | cfg->escan_info.run = brcmf_p2p_run_escan; | 
|  | } | 
|  | err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG, | 
|  | request->ie, request->ie_len); | 
|  | return err; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_discover_listen() - set firmware to discover listen state. | 
|  | * | 
|  | * @p2p: p2p device. | 
|  | * @channel: channel nr for discover listen. | 
|  | * @duration: time in ms to stay on channel. | 
|  | * | 
|  | */ | 
|  | static s32 | 
|  | brcmf_p2p_discover_listen(struct brcmf_p2p_info *p2p, u16 channel, u32 duration) | 
|  | { | 
|  | struct brcmf_cfg80211_vif *vif; | 
|  | struct brcmu_chan ch; | 
|  | s32 err = 0; | 
|  |  | 
|  | vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; | 
|  | if (!vif) { | 
|  | brcmf_err("Discovery is not set, so we have nothing to do\n"); | 
|  | err = -EPERM; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if (test_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, &p2p->status)) { | 
|  | brcmf_err("Previous LISTEN is not completed yet\n"); | 
|  | /* WAR: prevent cookie mismatch in wpa_supplicant return OK */ | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | ch.chnum = channel; | 
|  | ch.bw = BRCMU_CHAN_BW_20; | 
|  | p2p->cfg->d11inf.encchspec(&ch); | 
|  | err = brcmf_p2p_set_discover_state(vif->ifp, WL_P2P_DISC_ST_LISTEN, | 
|  | ch.chspec, (u16)duration); | 
|  | if (!err) { | 
|  | set_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, &p2p->status); | 
|  | p2p->remain_on_channel_cookie++; | 
|  | } | 
|  | exit: | 
|  | return err; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_remain_on_channel() - put device on channel and stay there. | 
|  | * | 
|  | * @wiphy: wiphy device. | 
|  | * @channel: channel to stay on. | 
|  | * @duration: time in ms to remain on channel. | 
|  | * | 
|  | */ | 
|  | int brcmf_p2p_remain_on_channel(struct wiphy *wiphy, struct wireless_dev *wdev, | 
|  | struct ieee80211_channel *channel, | 
|  | unsigned int duration, u64 *cookie) | 
|  | { | 
|  | struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); | 
|  | struct brcmf_p2p_info *p2p = &cfg->p2p; | 
|  | s32 err; | 
|  | u16 channel_nr; | 
|  |  | 
|  | channel_nr = ieee80211_frequency_to_channel(channel->center_freq); | 
|  | brcmf_dbg(TRACE, "Enter, channel: %d, duration ms (%d)\n", channel_nr, | 
|  | duration); | 
|  |  | 
|  | err = brcmf_p2p_enable_discovery(p2p); | 
|  | if (err) | 
|  | goto exit; | 
|  | err = brcmf_p2p_discover_listen(p2p, channel_nr, duration); | 
|  | if (err) | 
|  | goto exit; | 
|  |  | 
|  | memcpy(&p2p->remain_on_channel, channel, sizeof(*channel)); | 
|  | *cookie = p2p->remain_on_channel_cookie; | 
|  | cfg80211_ready_on_channel(wdev, *cookie, channel, duration, GFP_KERNEL); | 
|  |  | 
|  | exit: | 
|  | return err; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_notify_listen_complete() - p2p listen has completed. | 
|  | * | 
|  | * @ifp: interfac control. | 
|  | * @e: event message. Not used, to make it usable for fweh event dispatcher. | 
|  | * @data: payload of message. Not used. | 
|  | * | 
|  | */ | 
|  | int brcmf_p2p_notify_listen_complete(struct brcmf_if *ifp, | 
|  | const struct brcmf_event_msg *e, | 
|  | void *data) | 
|  | { | 
|  | struct brcmf_cfg80211_info *cfg = ifp->drvr->config; | 
|  | struct brcmf_p2p_info *p2p = &cfg->p2p; | 
|  |  | 
|  | brcmf_dbg(TRACE, "Enter\n"); | 
|  | if (test_and_clear_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, | 
|  | &p2p->status)) { | 
|  | if (test_and_clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN, | 
|  | &p2p->status)) { | 
|  | clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, | 
|  | &p2p->status); | 
|  | brcmf_dbg(INFO, "Listen DONE, wake up wait_next_af\n"); | 
|  | complete(&p2p->wait_next_af); | 
|  | } | 
|  |  | 
|  | cfg80211_remain_on_channel_expired(&ifp->vif->wdev, | 
|  | p2p->remain_on_channel_cookie, | 
|  | &p2p->remain_on_channel, | 
|  | GFP_KERNEL); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_cancel_remain_on_channel() - cancel p2p listen state. | 
|  | * | 
|  | * @ifp: interfac control. | 
|  | * | 
|  | */ | 
|  | void brcmf_p2p_cancel_remain_on_channel(struct brcmf_if *ifp) | 
|  | { | 
|  | if (!ifp) | 
|  | return; | 
|  | brcmf_p2p_set_discover_state(ifp, WL_P2P_DISC_ST_SCAN, 0, 0); | 
|  | brcmf_p2p_notify_listen_complete(ifp, NULL, NULL); | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_act_frm_search() - search function for action frame. | 
|  | * | 
|  | * @p2p: p2p device. | 
|  | * channel: channel on which action frame is to be trasmitted. | 
|  | * | 
|  | * search function to reach at common channel to send action frame. When | 
|  | * channel is 0 then all social channels will be used to send af | 
|  | */ | 
|  | static s32 brcmf_p2p_act_frm_search(struct brcmf_p2p_info *p2p, u16 channel) | 
|  | { | 
|  | s32 err; | 
|  | u32 channel_cnt; | 
|  | u16 *default_chan_list; | 
|  | u32 i; | 
|  | struct brcmu_chan ch; | 
|  |  | 
|  | brcmf_dbg(TRACE, "Enter\n"); | 
|  |  | 
|  | if (channel) | 
|  | channel_cnt = AF_PEER_SEARCH_CNT; | 
|  | else | 
|  | channel_cnt = SOCIAL_CHAN_CNT; | 
|  | default_chan_list = kzalloc(channel_cnt * sizeof(*default_chan_list), | 
|  | GFP_KERNEL); | 
|  | if (default_chan_list == NULL) { | 
|  | brcmf_err("channel list allocation failed\n"); | 
|  | err = -ENOMEM; | 
|  | goto exit; | 
|  | } | 
|  | ch.bw = BRCMU_CHAN_BW_20; | 
|  | if (channel) { | 
|  | ch.chnum = channel; | 
|  | p2p->cfg->d11inf.encchspec(&ch); | 
|  | /* insert same channel to the chan_list */ | 
|  | for (i = 0; i < channel_cnt; i++) | 
|  | default_chan_list[i] = ch.chspec; | 
|  | } else { | 
|  | ch.chnum = SOCIAL_CHAN_1; | 
|  | p2p->cfg->d11inf.encchspec(&ch); | 
|  | default_chan_list[0] = ch.chspec; | 
|  | ch.chnum = SOCIAL_CHAN_2; | 
|  | p2p->cfg->d11inf.encchspec(&ch); | 
|  | default_chan_list[1] = ch.chspec; | 
|  | ch.chnum = SOCIAL_CHAN_3; | 
|  | p2p->cfg->d11inf.encchspec(&ch); | 
|  | default_chan_list[2] = ch.chspec; | 
|  | } | 
|  | err = brcmf_p2p_escan(p2p, channel_cnt, default_chan_list, | 
|  | WL_P2P_DISC_ST_SEARCH, WL_ESCAN_ACTION_START, | 
|  | P2PAPI_BSSCFG_DEVICE); | 
|  | kfree(default_chan_list); | 
|  | exit: | 
|  | return err; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_afx_handler() - afx worker thread. | 
|  | * | 
|  | * @work: | 
|  | * | 
|  | */ | 
|  | static void brcmf_p2p_afx_handler(struct work_struct *work) | 
|  | { | 
|  | struct afx_hdl *afx_hdl = container_of(work, struct afx_hdl, afx_work); | 
|  | struct brcmf_p2p_info *p2p = container_of(afx_hdl, | 
|  | struct brcmf_p2p_info, | 
|  | afx_hdl); | 
|  | s32 err; | 
|  |  | 
|  | if (!afx_hdl->is_active) | 
|  | return; | 
|  |  | 
|  | if (afx_hdl->is_listen && afx_hdl->my_listen_chan) | 
|  | /* 100ms ~ 300ms */ | 
|  | err = brcmf_p2p_discover_listen(p2p, afx_hdl->my_listen_chan, | 
|  | 100 * (1 + prandom_u32() % 3)); | 
|  | else | 
|  | err = brcmf_p2p_act_frm_search(p2p, afx_hdl->peer_listen_chan); | 
|  |  | 
|  | if (err) { | 
|  | brcmf_err("ERROR occurred! value is (%d)\n", err); | 
|  | if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, | 
|  | &p2p->status)) | 
|  | complete(&afx_hdl->act_frm_scan); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_af_searching_channel() - search channel. | 
|  | * | 
|  | * @p2p: p2p device info struct. | 
|  | * | 
|  | */ | 
|  | static s32 brcmf_p2p_af_searching_channel(struct brcmf_p2p_info *p2p) | 
|  | { | 
|  | struct afx_hdl *afx_hdl = &p2p->afx_hdl; | 
|  | struct brcmf_cfg80211_vif *pri_vif; | 
|  | unsigned long duration; | 
|  | s32 retry; | 
|  |  | 
|  | brcmf_dbg(TRACE, "Enter\n"); | 
|  |  | 
|  | pri_vif = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif; | 
|  |  | 
|  | reinit_completion(&afx_hdl->act_frm_scan); | 
|  | set_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status); | 
|  | afx_hdl->is_active = true; | 
|  | afx_hdl->peer_chan = P2P_INVALID_CHANNEL; | 
|  |  | 
|  | /* Loop to wait until we find a peer's channel or the | 
|  | * pending action frame tx is cancelled. | 
|  | */ | 
|  | retry = 0; | 
|  | duration = msecs_to_jiffies(P2P_AF_FRM_SCAN_MAX_WAIT); | 
|  | while ((retry < P2P_CHANNEL_SYNC_RETRY) && | 
|  | (afx_hdl->peer_chan == P2P_INVALID_CHANNEL)) { | 
|  | afx_hdl->is_listen = false; | 
|  | brcmf_dbg(TRACE, "Scheduling action frame for sending.. (%d)\n", | 
|  | retry); | 
|  | /* search peer on peer's listen channel */ | 
|  | schedule_work(&afx_hdl->afx_work); | 
|  | wait_for_completion_timeout(&afx_hdl->act_frm_scan, duration); | 
|  | if ((afx_hdl->peer_chan != P2P_INVALID_CHANNEL) || | 
|  | (!test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, | 
|  | &p2p->status))) | 
|  | break; | 
|  |  | 
|  | if (afx_hdl->my_listen_chan) { | 
|  | brcmf_dbg(TRACE, "Scheduling listen peer, channel=%d\n", | 
|  | afx_hdl->my_listen_chan); | 
|  | /* listen on my listen channel */ | 
|  | afx_hdl->is_listen = true; | 
|  | schedule_work(&afx_hdl->afx_work); | 
|  | wait_for_completion_timeout(&afx_hdl->act_frm_scan, | 
|  | duration); | 
|  | } | 
|  | if ((afx_hdl->peer_chan != P2P_INVALID_CHANNEL) || | 
|  | (!test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, | 
|  | &p2p->status))) | 
|  | break; | 
|  | retry++; | 
|  |  | 
|  | /* if sta is connected or connecting, sleep for a while before | 
|  | * retry af tx or finding a peer | 
|  | */ | 
|  | if (test_bit(BRCMF_VIF_STATUS_CONNECTED, &pri_vif->sme_state) || | 
|  | test_bit(BRCMF_VIF_STATUS_CONNECTING, &pri_vif->sme_state)) | 
|  | msleep(P2P_DEFAULT_SLEEP_TIME_VSDB); | 
|  | } | 
|  |  | 
|  | brcmf_dbg(TRACE, "Completed search/listen peer_chan=%d\n", | 
|  | afx_hdl->peer_chan); | 
|  | afx_hdl->is_active = false; | 
|  |  | 
|  | clear_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status); | 
|  |  | 
|  | return afx_hdl->peer_chan; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_scan_finding_common_channel() - was escan used for finding channel | 
|  | * | 
|  | * @cfg: common configuration struct. | 
|  | * @bi: bss info struct, result from scan. | 
|  | * | 
|  | */ | 
|  | bool brcmf_p2p_scan_finding_common_channel(struct brcmf_cfg80211_info *cfg, | 
|  | struct brcmf_bss_info_le *bi) | 
|  |  | 
|  | { | 
|  | struct brcmf_p2p_info *p2p = &cfg->p2p; | 
|  | struct afx_hdl *afx_hdl = &p2p->afx_hdl; | 
|  | struct brcmu_chan ch; | 
|  | u8 *ie; | 
|  | s32 err; | 
|  | u8 p2p_dev_addr[ETH_ALEN]; | 
|  |  | 
|  | if (!test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status)) | 
|  | return false; | 
|  |  | 
|  | if (bi == NULL) { | 
|  | brcmf_dbg(TRACE, "ACTION FRAME SCAN Done\n"); | 
|  | if (afx_hdl->peer_chan == P2P_INVALID_CHANNEL) | 
|  | complete(&afx_hdl->act_frm_scan); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | ie = ((u8 *)bi) + le16_to_cpu(bi->ie_offset); | 
|  | memset(p2p_dev_addr, 0, sizeof(p2p_dev_addr)); | 
|  | err = cfg80211_get_p2p_attr(ie, le32_to_cpu(bi->ie_length), | 
|  | IEEE80211_P2P_ATTR_DEVICE_INFO, | 
|  | p2p_dev_addr, sizeof(p2p_dev_addr)); | 
|  | if (err < 0) | 
|  | err = cfg80211_get_p2p_attr(ie, le32_to_cpu(bi->ie_length), | 
|  | IEEE80211_P2P_ATTR_DEVICE_ID, | 
|  | p2p_dev_addr, sizeof(p2p_dev_addr)); | 
|  | if ((err >= 0) && | 
|  | (ether_addr_equal(p2p_dev_addr, afx_hdl->tx_dst_addr))) { | 
|  | if (!bi->ctl_ch) { | 
|  | ch.chspec = le16_to_cpu(bi->chanspec); | 
|  | cfg->d11inf.decchspec(&ch); | 
|  | bi->ctl_ch = ch.chnum; | 
|  | } | 
|  | afx_hdl->peer_chan = bi->ctl_ch; | 
|  | brcmf_dbg(TRACE, "ACTION FRAME SCAN : Peer %pM found, channel : %d\n", | 
|  | afx_hdl->tx_dst_addr, afx_hdl->peer_chan); | 
|  | complete(&afx_hdl->act_frm_scan); | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_stop_wait_next_action_frame() - finish scan if af tx complete. | 
|  | * | 
|  | * @cfg: common configuration struct. | 
|  | * | 
|  | */ | 
|  | static void | 
|  | brcmf_p2p_stop_wait_next_action_frame(struct brcmf_cfg80211_info *cfg) | 
|  | { | 
|  | struct brcmf_p2p_info *p2p = &cfg->p2p; | 
|  | struct brcmf_if *ifp = cfg->escan_info.ifp; | 
|  |  | 
|  | if (test_bit(BRCMF_P2P_STATUS_SENDING_ACT_FRAME, &p2p->status) && | 
|  | (test_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status) || | 
|  | test_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status))) { | 
|  | brcmf_dbg(TRACE, "*** Wake UP ** abort actframe iovar\n"); | 
|  | /* if channel is not zero, "actfame" uses off channel scan. | 
|  | * So abort scan for off channel completion. | 
|  | */ | 
|  | if (p2p->af_sent_channel) | 
|  | brcmf_notify_escan_complete(cfg, ifp, true, true); | 
|  | } else if (test_bit(BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN, | 
|  | &p2p->status)) { | 
|  | brcmf_dbg(TRACE, "*** Wake UP ** abort listen for next af frame\n"); | 
|  | /* So abort scan to cancel listen */ | 
|  | brcmf_notify_escan_complete(cfg, ifp, true, true); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_gon_req_collision() - Check if go negotiaton collission | 
|  | * | 
|  | * @p2p: p2p device info struct. | 
|  | * | 
|  | * return true if recevied action frame is to be dropped. | 
|  | */ | 
|  | static bool | 
|  | brcmf_p2p_gon_req_collision(struct brcmf_p2p_info *p2p, u8 *mac) | 
|  | { | 
|  | struct brcmf_cfg80211_info *cfg = p2p->cfg; | 
|  | struct brcmf_if *ifp; | 
|  |  | 
|  | brcmf_dbg(TRACE, "Enter\n"); | 
|  |  | 
|  | if (!test_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, &p2p->status) || | 
|  | !p2p->gon_req_action) | 
|  | return false; | 
|  |  | 
|  | brcmf_dbg(TRACE, "GO Negotiation Request COLLISION !!!\n"); | 
|  | /* if sa(peer) addr is less than da(my) addr, then this device | 
|  | * process peer's gon request and block to send gon req. | 
|  | * if not (sa addr > da addr), | 
|  | * this device will process gon request and drop gon req of peer. | 
|  | */ | 
|  | ifp = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif->ifp; | 
|  | if (memcmp(mac, ifp->mac_addr, ETH_ALEN) < 0) { | 
|  | brcmf_dbg(INFO, "Block transmit gon req !!!\n"); | 
|  | p2p->block_gon_req_tx = true; | 
|  | /* if we are finding a common channel for sending af, | 
|  | * do not scan more to block to send current gon req | 
|  | */ | 
|  | if (test_and_clear_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, | 
|  | &p2p->status)) | 
|  | complete(&p2p->afx_hdl.act_frm_scan); | 
|  | if (test_and_clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, | 
|  | &p2p->status)) | 
|  | brcmf_p2p_stop_wait_next_action_frame(cfg); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* drop gon request of peer to process gon request by this device. */ | 
|  | brcmf_dbg(INFO, "Drop received gon req !!!\n"); | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_notify_action_frame_rx() - received action frame. | 
|  | * | 
|  | * @ifp: interfac control. | 
|  | * @e: event message. Not used, to make it usable for fweh event dispatcher. | 
|  | * @data: payload of message, containing action frame data. | 
|  | * | 
|  | */ | 
|  | int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, | 
|  | const struct brcmf_event_msg *e, | 
|  | void *data) | 
|  | { | 
|  | struct brcmf_cfg80211_info *cfg = ifp->drvr->config; | 
|  | struct brcmf_p2p_info *p2p = &cfg->p2p; | 
|  | struct afx_hdl *afx_hdl = &p2p->afx_hdl; | 
|  | struct wireless_dev *wdev; | 
|  | u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data); | 
|  | struct brcmf_rx_mgmt_data *rxframe = (struct brcmf_rx_mgmt_data *)data; | 
|  | u8 *frame = (u8 *)(rxframe + 1); | 
|  | struct brcmf_p2p_pub_act_frame *act_frm; | 
|  | struct brcmf_p2psd_gas_pub_act_frame *sd_act_frm; | 
|  | struct brcmu_chan ch; | 
|  | struct ieee80211_mgmt *mgmt_frame; | 
|  | s32 freq; | 
|  | u16 mgmt_type; | 
|  | u8 action; | 
|  |  | 
|  | ch.chspec = be16_to_cpu(rxframe->chanspec); | 
|  | cfg->d11inf.decchspec(&ch); | 
|  | /* Check if wpa_supplicant has registered for this frame */ | 
|  | brcmf_dbg(INFO, "ifp->vif->mgmt_rx_reg %04x\n", ifp->vif->mgmt_rx_reg); | 
|  | mgmt_type = (IEEE80211_STYPE_ACTION & IEEE80211_FCTL_STYPE) >> 4; | 
|  | if ((ifp->vif->mgmt_rx_reg & BIT(mgmt_type)) == 0) | 
|  | return 0; | 
|  |  | 
|  | brcmf_p2p_print_actframe(false, frame, mgmt_frame_len); | 
|  |  | 
|  | action = P2P_PAF_SUBTYPE_INVALID; | 
|  | if (brcmf_p2p_is_pub_action(frame, mgmt_frame_len)) { | 
|  | act_frm = (struct brcmf_p2p_pub_act_frame *)frame; | 
|  | action = act_frm->subtype; | 
|  | if ((action == P2P_PAF_GON_REQ) && | 
|  | (brcmf_p2p_gon_req_collision(p2p, (u8 *)e->addr))) { | 
|  | if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, | 
|  | &p2p->status) && | 
|  | (ether_addr_equal(afx_hdl->tx_dst_addr, e->addr))) { | 
|  | afx_hdl->peer_chan = ch.chnum; | 
|  | brcmf_dbg(INFO, "GON request: Peer found, channel=%d\n", | 
|  | afx_hdl->peer_chan); | 
|  | complete(&afx_hdl->act_frm_scan); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | /* After complete GO Negotiation, roll back to mpc mode */ | 
|  | if ((action == P2P_PAF_GON_CONF) || | 
|  | (action == P2P_PAF_PROVDIS_RSP)) | 
|  | brcmf_set_mpc(ifp, 1); | 
|  | if (action == P2P_PAF_GON_CONF) { | 
|  | brcmf_dbg(TRACE, "P2P: GO_NEG_PHASE status cleared\n"); | 
|  | clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); | 
|  | } | 
|  | } else if (brcmf_p2p_is_gas_action(frame, mgmt_frame_len)) { | 
|  | sd_act_frm = (struct brcmf_p2psd_gas_pub_act_frame *)frame; | 
|  | action = sd_act_frm->action; | 
|  | } | 
|  |  | 
|  | if (test_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, &p2p->status) && | 
|  | (p2p->next_af_subtype == action)) { | 
|  | brcmf_dbg(TRACE, "We got a right next frame! (%d)\n", action); | 
|  | clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, | 
|  | &p2p->status); | 
|  | /* Stop waiting for next AF. */ | 
|  | brcmf_p2p_stop_wait_next_action_frame(cfg); | 
|  | } | 
|  |  | 
|  | mgmt_frame = kzalloc(offsetof(struct ieee80211_mgmt, u) + | 
|  | mgmt_frame_len, GFP_KERNEL); | 
|  | if (!mgmt_frame) { | 
|  | brcmf_err("No memory available for action frame\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | memcpy(mgmt_frame->da, ifp->mac_addr, ETH_ALEN); | 
|  | brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSSID, mgmt_frame->bssid, | 
|  | ETH_ALEN); | 
|  | memcpy(mgmt_frame->sa, e->addr, ETH_ALEN); | 
|  | mgmt_frame->frame_control = cpu_to_le16(IEEE80211_STYPE_ACTION); | 
|  | memcpy(&mgmt_frame->u, frame, mgmt_frame_len); | 
|  | mgmt_frame_len += offsetof(struct ieee80211_mgmt, u); | 
|  |  | 
|  | freq = ieee80211_channel_to_frequency(ch.chnum, | 
|  | ch.band == BRCMU_CHAN_BAND_2G ? | 
|  | IEEE80211_BAND_2GHZ : | 
|  | IEEE80211_BAND_5GHZ); | 
|  |  | 
|  | wdev = &ifp->vif->wdev; | 
|  | cfg80211_rx_mgmt(wdev, freq, 0, (u8 *)mgmt_frame, mgmt_frame_len, 0); | 
|  |  | 
|  | kfree(mgmt_frame); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_notify_action_tx_complete() - transmit action frame complete | 
|  | * | 
|  | * @ifp: interfac control. | 
|  | * @e: event message. Not used, to make it usable for fweh event dispatcher. | 
|  | * @data: not used. | 
|  | * | 
|  | */ | 
|  | int brcmf_p2p_notify_action_tx_complete(struct brcmf_if *ifp, | 
|  | const struct brcmf_event_msg *e, | 
|  | void *data) | 
|  | { | 
|  | struct brcmf_cfg80211_info *cfg = ifp->drvr->config; | 
|  | struct brcmf_p2p_info *p2p = &cfg->p2p; | 
|  |  | 
|  | brcmf_dbg(INFO, "Enter: event %s, status=%d\n", | 
|  | e->event_code == BRCMF_E_ACTION_FRAME_OFF_CHAN_COMPLETE ? | 
|  | "ACTION_FRAME_OFF_CHAN_COMPLETE" : "ACTION_FRAME_COMPLETE", | 
|  | e->status); | 
|  |  | 
|  | if (!test_bit(BRCMF_P2P_STATUS_SENDING_ACT_FRAME, &p2p->status)) | 
|  | return 0; | 
|  |  | 
|  | if (e->event_code == BRCMF_E_ACTION_FRAME_COMPLETE) { | 
|  | if (e->status == BRCMF_E_STATUS_SUCCESS) | 
|  | set_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, | 
|  | &p2p->status); | 
|  | else { | 
|  | set_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status); | 
|  | /* If there is no ack, we don't need to wait for | 
|  | * WLC_E_ACTION_FRAME_OFFCHAN_COMPLETE event | 
|  | */ | 
|  | brcmf_p2p_stop_wait_next_action_frame(cfg); | 
|  | } | 
|  |  | 
|  | } else { | 
|  | complete(&p2p->send_af_done); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_tx_action_frame() - send action frame over fil. | 
|  | * | 
|  | * @p2p: p2p info struct for vif. | 
|  | * @af_params: action frame data/info. | 
|  | * | 
|  | * Send an action frame immediately without doing channel synchronization. | 
|  | * | 
|  | * This function waits for a completion event before returning. | 
|  | * The WLC_E_ACTION_FRAME_COMPLETE event will be received when the action | 
|  | * frame is transmitted. | 
|  | */ | 
|  | static s32 brcmf_p2p_tx_action_frame(struct brcmf_p2p_info *p2p, | 
|  | struct brcmf_fil_af_params_le *af_params) | 
|  | { | 
|  | struct brcmf_cfg80211_vif *vif; | 
|  | s32 err = 0; | 
|  | s32 timeout = 0; | 
|  |  | 
|  | brcmf_dbg(TRACE, "Enter\n"); | 
|  |  | 
|  | reinit_completion(&p2p->send_af_done); | 
|  | clear_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status); | 
|  | clear_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status); | 
|  |  | 
|  | vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; | 
|  | err = brcmf_fil_bsscfg_data_set(vif->ifp, "actframe", af_params, | 
|  | sizeof(*af_params)); | 
|  | if (err) { | 
|  | brcmf_err(" sending action frame has failed\n"); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | p2p->af_sent_channel = le32_to_cpu(af_params->channel); | 
|  | p2p->af_tx_sent_jiffies = jiffies; | 
|  |  | 
|  | timeout = wait_for_completion_timeout(&p2p->send_af_done, | 
|  | msecs_to_jiffies(P2P_AF_MAX_WAIT_TIME)); | 
|  |  | 
|  | if (test_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status)) { | 
|  | brcmf_dbg(TRACE, "TX action frame operation is success\n"); | 
|  | } else { | 
|  | err = -EIO; | 
|  | brcmf_dbg(TRACE, "TX action frame operation has failed\n"); | 
|  | } | 
|  | /* clear status bit for action tx */ | 
|  | clear_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status); | 
|  | clear_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status); | 
|  |  | 
|  | exit: | 
|  | return err; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_pub_af_tx() - public action frame tx routine. | 
|  | * | 
|  | * @cfg: driver private data for cfg80211 interface. | 
|  | * @af_params: action frame data/info. | 
|  | * @config_af_params: configuration data for action frame. | 
|  | * | 
|  | * routine which transmits ation frame public type. | 
|  | */ | 
|  | static s32 brcmf_p2p_pub_af_tx(struct brcmf_cfg80211_info *cfg, | 
|  | struct brcmf_fil_af_params_le *af_params, | 
|  | struct brcmf_config_af_params *config_af_params) | 
|  | { | 
|  | struct brcmf_p2p_info *p2p = &cfg->p2p; | 
|  | struct brcmf_fil_action_frame_le *action_frame; | 
|  | struct brcmf_p2p_pub_act_frame *act_frm; | 
|  | s32 err = 0; | 
|  | u16 ie_len; | 
|  |  | 
|  | action_frame = &af_params->action_frame; | 
|  | act_frm = (struct brcmf_p2p_pub_act_frame *)(action_frame->data); | 
|  |  | 
|  | config_af_params->extra_listen = true; | 
|  |  | 
|  | switch (act_frm->subtype) { | 
|  | case P2P_PAF_GON_REQ: | 
|  | brcmf_dbg(TRACE, "P2P: GO_NEG_PHASE status set\n"); | 
|  | set_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); | 
|  | config_af_params->mpc_onoff = 0; | 
|  | config_af_params->search_channel = true; | 
|  | p2p->next_af_subtype = act_frm->subtype + 1; | 
|  | p2p->gon_req_action = true; | 
|  | /* increase dwell time to wait for RESP frame */ | 
|  | af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); | 
|  | break; | 
|  | case P2P_PAF_GON_RSP: | 
|  | p2p->next_af_subtype = act_frm->subtype + 1; | 
|  | /* increase dwell time to wait for CONF frame */ | 
|  | af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); | 
|  | break; | 
|  | case P2P_PAF_GON_CONF: | 
|  | /* If we reached till GO Neg confirmation reset the filter */ | 
|  | brcmf_dbg(TRACE, "P2P: GO_NEG_PHASE status cleared\n"); | 
|  | clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); | 
|  | /* turn on mpc again if go nego is done */ | 
|  | config_af_params->mpc_onoff = 1; | 
|  | /* minimize dwell time */ | 
|  | af_params->dwell_time = cpu_to_le32(P2P_AF_MIN_DWELL_TIME); | 
|  | config_af_params->extra_listen = false; | 
|  | break; | 
|  | case P2P_PAF_INVITE_REQ: | 
|  | config_af_params->search_channel = true; | 
|  | p2p->next_af_subtype = act_frm->subtype + 1; | 
|  | /* increase dwell time */ | 
|  | af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); | 
|  | break; | 
|  | case P2P_PAF_INVITE_RSP: | 
|  | /* minimize dwell time */ | 
|  | af_params->dwell_time = cpu_to_le32(P2P_AF_MIN_DWELL_TIME); | 
|  | config_af_params->extra_listen = false; | 
|  | break; | 
|  | case P2P_PAF_DEVDIS_REQ: | 
|  | config_af_params->search_channel = true; | 
|  | p2p->next_af_subtype = act_frm->subtype + 1; | 
|  | /* maximize dwell time to wait for RESP frame */ | 
|  | af_params->dwell_time = cpu_to_le32(P2P_AF_LONG_DWELL_TIME); | 
|  | break; | 
|  | case P2P_PAF_DEVDIS_RSP: | 
|  | /* minimize dwell time */ | 
|  | af_params->dwell_time = cpu_to_le32(P2P_AF_MIN_DWELL_TIME); | 
|  | config_af_params->extra_listen = false; | 
|  | break; | 
|  | case P2P_PAF_PROVDIS_REQ: | 
|  | ie_len = le16_to_cpu(action_frame->len) - | 
|  | offsetof(struct brcmf_p2p_pub_act_frame, elts); | 
|  | if (cfg80211_get_p2p_attr(&act_frm->elts[0], ie_len, | 
|  | IEEE80211_P2P_ATTR_GROUP_ID, | 
|  | NULL, 0) < 0) | 
|  | config_af_params->search_channel = true; | 
|  | config_af_params->mpc_onoff = 0; | 
|  | p2p->next_af_subtype = act_frm->subtype + 1; | 
|  | /* increase dwell time to wait for RESP frame */ | 
|  | af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); | 
|  | break; | 
|  | case P2P_PAF_PROVDIS_RSP: | 
|  | /* wpa_supplicant send go nego req right after prov disc */ | 
|  | p2p->next_af_subtype = P2P_PAF_GON_REQ; | 
|  | /* increase dwell time to MED level */ | 
|  | af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); | 
|  | config_af_params->extra_listen = false; | 
|  | break; | 
|  | default: | 
|  | brcmf_err("Unknown p2p pub act frame subtype: %d\n", | 
|  | act_frm->subtype); | 
|  | err = -EINVAL; | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_send_action_frame() - send action frame . | 
|  | * | 
|  | * @cfg: driver private data for cfg80211 interface. | 
|  | * @ndev: net device to transmit on. | 
|  | * @af_params: configuration data for action frame. | 
|  | */ | 
|  | bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, | 
|  | struct net_device *ndev, | 
|  | struct brcmf_fil_af_params_le *af_params) | 
|  | { | 
|  | struct brcmf_p2p_info *p2p = &cfg->p2p; | 
|  | struct brcmf_if *ifp = netdev_priv(ndev); | 
|  | struct brcmf_fil_action_frame_le *action_frame; | 
|  | struct brcmf_config_af_params config_af_params; | 
|  | struct afx_hdl *afx_hdl = &p2p->afx_hdl; | 
|  | u16 action_frame_len; | 
|  | bool ack = false; | 
|  | u8 category; | 
|  | u8 action; | 
|  | s32 tx_retry; | 
|  | s32 extra_listen_time; | 
|  | uint delta_ms; | 
|  |  | 
|  | action_frame = &af_params->action_frame; | 
|  | action_frame_len = le16_to_cpu(action_frame->len); | 
|  |  | 
|  | brcmf_p2p_print_actframe(true, action_frame->data, action_frame_len); | 
|  |  | 
|  | /* Add the default dwell time. Dwell time to stay off-channel */ | 
|  | /* to wait for a response action frame after transmitting an  */ | 
|  | /* GO Negotiation action frame                                */ | 
|  | af_params->dwell_time = cpu_to_le32(P2P_AF_DWELL_TIME); | 
|  |  | 
|  | category = action_frame->data[DOT11_ACTION_CAT_OFF]; | 
|  | action = action_frame->data[DOT11_ACTION_ACT_OFF]; | 
|  |  | 
|  | /* initialize variables */ | 
|  | p2p->next_af_subtype = P2P_PAF_SUBTYPE_INVALID; | 
|  | p2p->gon_req_action = false; | 
|  |  | 
|  | /* config parameters */ | 
|  | config_af_params.mpc_onoff = -1; | 
|  | config_af_params.search_channel = false; | 
|  | config_af_params.extra_listen = false; | 
|  |  | 
|  | if (brcmf_p2p_is_pub_action(action_frame->data, action_frame_len)) { | 
|  | /* p2p public action frame process */ | 
|  | if (brcmf_p2p_pub_af_tx(cfg, af_params, &config_af_params)) { | 
|  | /* Just send unknown subtype frame with */ | 
|  | /* default parameters.                  */ | 
|  | brcmf_err("P2P Public action frame, unknown subtype.\n"); | 
|  | } | 
|  | } else if (brcmf_p2p_is_gas_action(action_frame->data, | 
|  | action_frame_len)) { | 
|  | /* service discovery process */ | 
|  | if (action == P2PSD_ACTION_ID_GAS_IREQ || | 
|  | action == P2PSD_ACTION_ID_GAS_CREQ) { | 
|  | /* configure service discovery query frame */ | 
|  | config_af_params.search_channel = true; | 
|  |  | 
|  | /* save next af suptype to cancel */ | 
|  | /* remaining dwell time           */ | 
|  | p2p->next_af_subtype = action + 1; | 
|  |  | 
|  | af_params->dwell_time = | 
|  | cpu_to_le32(P2P_AF_MED_DWELL_TIME); | 
|  | } else if (action == P2PSD_ACTION_ID_GAS_IRESP || | 
|  | action == P2PSD_ACTION_ID_GAS_CRESP) { | 
|  | /* configure service discovery response frame */ | 
|  | af_params->dwell_time = | 
|  | cpu_to_le32(P2P_AF_MIN_DWELL_TIME); | 
|  | } else { | 
|  | brcmf_err("Unknown action type: %d\n", action); | 
|  | goto exit; | 
|  | } | 
|  | } else if (brcmf_p2p_is_p2p_action(action_frame->data, | 
|  | action_frame_len)) { | 
|  | /* do not configure anything. it will be */ | 
|  | /* sent with a default configuration     */ | 
|  | } else { | 
|  | brcmf_err("Unknown Frame: category 0x%x, action 0x%x\n", | 
|  | category, action); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* if connecting on primary iface, sleep for a while before sending | 
|  | * af tx for VSDB | 
|  | */ | 
|  | if (test_bit(BRCMF_VIF_STATUS_CONNECTING, | 
|  | &p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->sme_state)) | 
|  | msleep(50); | 
|  |  | 
|  | /* if scan is ongoing, abort current scan. */ | 
|  | if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) | 
|  | brcmf_abort_scanning(cfg); | 
|  |  | 
|  | memcpy(afx_hdl->tx_dst_addr, action_frame->da, ETH_ALEN); | 
|  |  | 
|  | /* To make sure to send successfully action frame, turn off mpc */ | 
|  | if (config_af_params.mpc_onoff == 0) | 
|  | brcmf_set_mpc(ifp, 0); | 
|  |  | 
|  | /* set status and destination address before sending af */ | 
|  | if (p2p->next_af_subtype != P2P_PAF_SUBTYPE_INVALID) { | 
|  | /* set status to cancel the remained dwell time in rx process */ | 
|  | set_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, &p2p->status); | 
|  | } | 
|  |  | 
|  | p2p->af_sent_channel = 0; | 
|  | set_bit(BRCMF_P2P_STATUS_SENDING_ACT_FRAME, &p2p->status); | 
|  | /* validate channel and p2p ies */ | 
|  | if (config_af_params.search_channel && | 
|  | IS_P2P_SOCIAL_CHANNEL(le32_to_cpu(af_params->channel)) && | 
|  | p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif->saved_ie.probe_req_ie_len) { | 
|  | afx_hdl = &p2p->afx_hdl; | 
|  | afx_hdl->peer_listen_chan = le32_to_cpu(af_params->channel); | 
|  |  | 
|  | if (brcmf_p2p_af_searching_channel(p2p) == | 
|  | P2P_INVALID_CHANNEL) { | 
|  | brcmf_err("Couldn't find peer's channel.\n"); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | /* Abort scan even for VSDB scenarios. Scan gets aborted in | 
|  | * firmware but after the check of piggyback algorithm. To take | 
|  | * care of current piggback algo, lets abort the scan here | 
|  | * itself. | 
|  | */ | 
|  | brcmf_notify_escan_complete(cfg, ifp, true, true); | 
|  |  | 
|  | /* update channel */ | 
|  | af_params->channel = cpu_to_le32(afx_hdl->peer_chan); | 
|  | } | 
|  |  | 
|  | tx_retry = 0; | 
|  | while (!p2p->block_gon_req_tx && | 
|  | (ack == false) && (tx_retry < P2P_AF_TX_MAX_RETRY)) { | 
|  | ack = !brcmf_p2p_tx_action_frame(p2p, af_params); | 
|  | tx_retry++; | 
|  | } | 
|  | if (ack == false) { | 
|  | brcmf_err("Failed to send Action Frame(retry %d)\n", tx_retry); | 
|  | clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); | 
|  | } | 
|  |  | 
|  | exit: | 
|  | clear_bit(BRCMF_P2P_STATUS_SENDING_ACT_FRAME, &p2p->status); | 
|  |  | 
|  | /* WAR: sometimes dongle does not keep the dwell time of 'actframe'. | 
|  | * if we coundn't get the next action response frame and dongle does | 
|  | * not keep the dwell time, go to listen state again to get next action | 
|  | * response frame. | 
|  | */ | 
|  | if (ack && config_af_params.extra_listen && !p2p->block_gon_req_tx && | 
|  | test_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, &p2p->status) && | 
|  | p2p->af_sent_channel == afx_hdl->my_listen_chan) { | 
|  | delta_ms = jiffies_to_msecs(jiffies - p2p->af_tx_sent_jiffies); | 
|  | if (le32_to_cpu(af_params->dwell_time) > delta_ms) | 
|  | extra_listen_time = le32_to_cpu(af_params->dwell_time) - | 
|  | delta_ms; | 
|  | else | 
|  | extra_listen_time = 0; | 
|  | if (extra_listen_time > 50) { | 
|  | set_bit(BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN, | 
|  | &p2p->status); | 
|  | brcmf_dbg(INFO, "Wait more time! actual af time:%d, calculated extra listen:%d\n", | 
|  | le32_to_cpu(af_params->dwell_time), | 
|  | extra_listen_time); | 
|  | extra_listen_time += 100; | 
|  | if (!brcmf_p2p_discover_listen(p2p, | 
|  | p2p->af_sent_channel, | 
|  | extra_listen_time)) { | 
|  | unsigned long duration; | 
|  |  | 
|  | extra_listen_time += 100; | 
|  | duration = msecs_to_jiffies(extra_listen_time); | 
|  | wait_for_completion_timeout(&p2p->wait_next_af, | 
|  | duration); | 
|  | } | 
|  | clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN, | 
|  | &p2p->status); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (p2p->block_gon_req_tx) { | 
|  | /* if ack is true, supplicant will wait more time(100ms). | 
|  | * so we will return it as a success to get more time . | 
|  | */ | 
|  | p2p->block_gon_req_tx = false; | 
|  | ack = true; | 
|  | } | 
|  |  | 
|  | clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, &p2p->status); | 
|  | /* if all done, turn mpc on again */ | 
|  | if (config_af_params.mpc_onoff == 1) | 
|  | brcmf_set_mpc(ifp, 1); | 
|  |  | 
|  | return ack; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_notify_rx_mgmt_p2p_probereq() - Event handler for p2p probe req. | 
|  | * | 
|  | * @ifp: interface pointer for which event was received. | 
|  | * @e: even message. | 
|  | * @data: payload of event message (probe request). | 
|  | */ | 
|  | s32 brcmf_p2p_notify_rx_mgmt_p2p_probereq(struct brcmf_if *ifp, | 
|  | const struct brcmf_event_msg *e, | 
|  | void *data) | 
|  | { | 
|  | struct brcmf_cfg80211_info *cfg = ifp->drvr->config; | 
|  | struct brcmf_p2p_info *p2p = &cfg->p2p; | 
|  | struct afx_hdl *afx_hdl = &p2p->afx_hdl; | 
|  | struct brcmf_cfg80211_vif *vif = ifp->vif; | 
|  | struct brcmf_rx_mgmt_data *rxframe = (struct brcmf_rx_mgmt_data *)data; | 
|  | u16 chanspec = be16_to_cpu(rxframe->chanspec); | 
|  | struct brcmu_chan ch; | 
|  | u8 *mgmt_frame; | 
|  | u32 mgmt_frame_len; | 
|  | s32 freq; | 
|  | u16 mgmt_type; | 
|  |  | 
|  | brcmf_dbg(INFO, "Enter: event %d reason %d\n", e->event_code, | 
|  | e->reason); | 
|  |  | 
|  | ch.chspec = be16_to_cpu(rxframe->chanspec); | 
|  | cfg->d11inf.decchspec(&ch); | 
|  |  | 
|  | if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status) && | 
|  | (ether_addr_equal(afx_hdl->tx_dst_addr, e->addr))) { | 
|  | afx_hdl->peer_chan = ch.chnum; | 
|  | brcmf_dbg(INFO, "PROBE REQUEST: Peer found, channel=%d\n", | 
|  | afx_hdl->peer_chan); | 
|  | complete(&afx_hdl->act_frm_scan); | 
|  | } | 
|  |  | 
|  | /* Firmware sends us two proberesponses for each idx one. At the */ | 
|  | /* moment anything but bsscfgidx 0 is passed up to supplicant    */ | 
|  | if (e->bsscfgidx == 0) | 
|  | return 0; | 
|  |  | 
|  | /* Filter any P2P probe reqs arriving during the GO-NEG Phase */ | 
|  | if (test_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status)) { | 
|  | brcmf_dbg(INFO, "Filtering P2P probe_req in GO-NEG phase\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Check if wpa_supplicant has registered for this frame */ | 
|  | brcmf_dbg(INFO, "vif->mgmt_rx_reg %04x\n", vif->mgmt_rx_reg); | 
|  | mgmt_type = (IEEE80211_STYPE_PROBE_REQ & IEEE80211_FCTL_STYPE) >> 4; | 
|  | if ((vif->mgmt_rx_reg & BIT(mgmt_type)) == 0) | 
|  | return 0; | 
|  |  | 
|  | mgmt_frame = (u8 *)(rxframe + 1); | 
|  | mgmt_frame_len = e->datalen - sizeof(*rxframe); | 
|  | freq = ieee80211_channel_to_frequency(ch.chnum, | 
|  | ch.band == BRCMU_CHAN_BAND_2G ? | 
|  | IEEE80211_BAND_2GHZ : | 
|  | IEEE80211_BAND_5GHZ); | 
|  |  | 
|  | cfg80211_rx_mgmt(&vif->wdev, freq, 0, mgmt_frame, mgmt_frame_len, 0); | 
|  |  | 
|  | brcmf_dbg(INFO, "mgmt_frame_len (%d) , e->datalen (%d), chanspec (%04x), freq (%d)\n", | 
|  | mgmt_frame_len, e->datalen, chanspec, freq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_attach() - attach for P2P. | 
|  | * | 
|  | * @cfg: driver private data for cfg80211 interface. | 
|  | */ | 
|  | s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) | 
|  | { | 
|  | struct brcmf_if *pri_ifp; | 
|  | struct brcmf_if *p2p_ifp; | 
|  | struct brcmf_cfg80211_vif *p2p_vif; | 
|  | struct brcmf_p2p_info *p2p; | 
|  | struct brcmf_pub *drvr; | 
|  | s32 bssidx; | 
|  | s32 err = 0; | 
|  |  | 
|  | p2p = &cfg->p2p; | 
|  | p2p->cfg = cfg; | 
|  |  | 
|  | drvr = cfg->pub; | 
|  |  | 
|  | pri_ifp = drvr->iflist[0]; | 
|  | p2p_ifp = drvr->iflist[1]; | 
|  |  | 
|  | p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = pri_ifp->vif; | 
|  |  | 
|  | if (p2p_ifp) { | 
|  | p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_P2P_DEVICE, | 
|  | false); | 
|  | if (IS_ERR(p2p_vif)) { | 
|  | brcmf_err("could not create discovery vif\n"); | 
|  | err = -ENOMEM; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | p2p_vif->ifp = p2p_ifp; | 
|  | p2p_ifp->vif = p2p_vif; | 
|  | p2p_vif->wdev.netdev = p2p_ifp->ndev; | 
|  | p2p_ifp->ndev->ieee80211_ptr = &p2p_vif->wdev; | 
|  | SET_NETDEV_DEV(p2p_ifp->ndev, wiphy_dev(cfg->wiphy)); | 
|  |  | 
|  | p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif; | 
|  |  | 
|  | brcmf_p2p_generate_bss_mac(p2p, NULL); | 
|  | memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN); | 
|  | brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr); | 
|  |  | 
|  | /* Initialize P2P Discovery in the firmware */ | 
|  | err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1); | 
|  | if (err < 0) { | 
|  | brcmf_err("set p2p_disc error\n"); | 
|  | brcmf_free_vif(p2p_vif); | 
|  | goto exit; | 
|  | } | 
|  | /* obtain bsscfg index for P2P discovery */ | 
|  | err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx); | 
|  | if (err < 0) { | 
|  | brcmf_err("retrieving discover bsscfg index failed\n"); | 
|  | brcmf_free_vif(p2p_vif); | 
|  | goto exit; | 
|  | } | 
|  | /* Verify that firmware uses same bssidx as driver !! */ | 
|  | if (p2p_ifp->bssidx != bssidx) { | 
|  | brcmf_err("Incorrect bssidx=%d, compared to p2p_ifp->bssidx=%d\n", | 
|  | bssidx, p2p_ifp->bssidx); | 
|  | brcmf_free_vif(p2p_vif); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | init_completion(&p2p->send_af_done); | 
|  | INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler); | 
|  | init_completion(&p2p->afx_hdl.act_frm_scan); | 
|  | init_completion(&p2p->wait_next_af); | 
|  | } | 
|  | exit: | 
|  | return err; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_detach() - detach P2P. | 
|  | * | 
|  | * @p2p: P2P specific data. | 
|  | */ | 
|  | void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) | 
|  | { | 
|  | struct brcmf_cfg80211_vif *vif; | 
|  |  | 
|  | vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; | 
|  | if (vif != NULL) { | 
|  | brcmf_p2p_cancel_remain_on_channel(vif->ifp); | 
|  | brcmf_p2p_deinit_discovery(p2p); | 
|  | /* remove discovery interface */ | 
|  | brcmf_free_vif(vif); | 
|  | p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; | 
|  | } | 
|  | /* just set it all to zero */ | 
|  | memset(p2p, 0, sizeof(*p2p)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_get_current_chanspec() - Get current operation channel. | 
|  | * | 
|  | * @p2p: P2P specific data. | 
|  | * @chanspec: chanspec to be returned. | 
|  | */ | 
|  | static void brcmf_p2p_get_current_chanspec(struct brcmf_p2p_info *p2p, | 
|  | u16 *chanspec) | 
|  | { | 
|  | struct brcmf_if *ifp; | 
|  | u8 mac_addr[ETH_ALEN]; | 
|  | struct brcmu_chan ch; | 
|  | struct brcmf_bss_info_le *bi; | 
|  | u8 *buf; | 
|  |  | 
|  | ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; | 
|  |  | 
|  | if (brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSSID, mac_addr, | 
|  | ETH_ALEN) == 0) { | 
|  | buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL); | 
|  | if (buf != NULL) { | 
|  | *(__le32 *)buf = cpu_to_le32(WL_BSS_INFO_MAX); | 
|  | if (brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO, | 
|  | buf, WL_BSS_INFO_MAX) == 0) { | 
|  | bi = (struct brcmf_bss_info_le *)(buf + 4); | 
|  | *chanspec = le16_to_cpu(bi->chanspec); | 
|  | kfree(buf); | 
|  | return; | 
|  | } | 
|  | kfree(buf); | 
|  | } | 
|  | } | 
|  | /* Use default channel for P2P */ | 
|  | ch.chnum = BRCMF_P2P_TEMP_CHAN; | 
|  | ch.bw = BRCMU_CHAN_BW_20; | 
|  | p2p->cfg->d11inf.encchspec(&ch); | 
|  | *chanspec = ch.chspec; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Change a P2P Role. | 
|  | * Parameters: | 
|  | * @mac: MAC address of the BSS to change a role | 
|  | * Returns 0 if success. | 
|  | */ | 
|  | int brcmf_p2p_ifchange(struct brcmf_cfg80211_info *cfg, | 
|  | enum brcmf_fil_p2p_if_types if_type) | 
|  | { | 
|  | struct brcmf_p2p_info *p2p = &cfg->p2p; | 
|  | struct brcmf_cfg80211_vif *vif; | 
|  | struct brcmf_fil_p2p_if_le if_request; | 
|  | s32 err; | 
|  | u16 chanspec; | 
|  |  | 
|  | brcmf_dbg(TRACE, "Enter\n"); | 
|  |  | 
|  | vif = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif; | 
|  | if (!vif) { | 
|  | brcmf_err("vif for P2PAPI_BSSCFG_PRIMARY does not exist\n"); | 
|  | return -EPERM; | 
|  | } | 
|  | brcmf_notify_escan_complete(cfg, vif->ifp, true, true); | 
|  | vif = p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif; | 
|  | if (!vif) { | 
|  | brcmf_err("vif for P2PAPI_BSSCFG_CONNECTION does not exist\n"); | 
|  | return -EPERM; | 
|  | } | 
|  | brcmf_set_mpc(vif->ifp, 0); | 
|  |  | 
|  | /* In concurrency case, STA may be already associated in a particular */ | 
|  | /* channel. so retrieve the current channel of primary interface and  */ | 
|  | /* then start the virtual interface on that.                          */ | 
|  | brcmf_p2p_get_current_chanspec(p2p, &chanspec); | 
|  |  | 
|  | if_request.type = cpu_to_le16((u16)if_type); | 
|  | if_request.chspec = cpu_to_le16(chanspec); | 
|  | memcpy(if_request.addr, p2p->int_addr, sizeof(if_request.addr)); | 
|  |  | 
|  | brcmf_cfg80211_arm_vif_event(cfg, vif); | 
|  | err = brcmf_fil_iovar_data_set(vif->ifp, "p2p_ifupd", &if_request, | 
|  | sizeof(if_request)); | 
|  | if (err) { | 
|  | brcmf_err("p2p_ifupd FAILED, err=%d\n", err); | 
|  | brcmf_cfg80211_arm_vif_event(cfg, NULL); | 
|  | return err; | 
|  | } | 
|  | err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_CHANGE, | 
|  | msecs_to_jiffies(1500)); | 
|  | brcmf_cfg80211_arm_vif_event(cfg, NULL); | 
|  | if (!err)  { | 
|  | brcmf_err("No BRCMF_E_IF_CHANGE event received\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | err = brcmf_fil_cmd_int_set(vif->ifp, BRCMF_C_SET_SCB_TIMEOUT, | 
|  | BRCMF_SCB_TIMEOUT_VALUE); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int brcmf_p2p_request_p2p_if(struct brcmf_p2p_info *p2p, | 
|  | struct brcmf_if *ifp, u8 ea[ETH_ALEN], | 
|  | enum brcmf_fil_p2p_if_types iftype) | 
|  | { | 
|  | struct brcmf_fil_p2p_if_le if_request; | 
|  | int err; | 
|  | u16 chanspec; | 
|  |  | 
|  | /* we need a default channel */ | 
|  | brcmf_p2p_get_current_chanspec(p2p, &chanspec); | 
|  |  | 
|  | /* fill the firmware request */ | 
|  | memcpy(if_request.addr, ea, ETH_ALEN); | 
|  | if_request.type = cpu_to_le16((u16)iftype); | 
|  | if_request.chspec = cpu_to_le16(chanspec); | 
|  |  | 
|  | err = brcmf_fil_iovar_data_set(ifp, "p2p_ifadd", &if_request, | 
|  | sizeof(if_request)); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int brcmf_p2p_disable_p2p_if(struct brcmf_cfg80211_vif *vif) | 
|  | { | 
|  | struct brcmf_cfg80211_info *cfg = wdev_to_cfg(&vif->wdev); | 
|  | struct net_device *pri_ndev = cfg_to_ndev(cfg); | 
|  | struct brcmf_if *ifp = netdev_priv(pri_ndev); | 
|  | u8 *addr = vif->wdev.netdev->dev_addr; | 
|  |  | 
|  | return brcmf_fil_iovar_data_set(ifp, "p2p_ifdis", addr, ETH_ALEN); | 
|  | } | 
|  |  | 
|  | static int brcmf_p2p_release_p2p_if(struct brcmf_cfg80211_vif *vif) | 
|  | { | 
|  | struct brcmf_cfg80211_info *cfg = wdev_to_cfg(&vif->wdev); | 
|  | struct net_device *pri_ndev = cfg_to_ndev(cfg); | 
|  | struct brcmf_if *ifp = netdev_priv(pri_ndev); | 
|  | u8 *addr = vif->wdev.netdev->dev_addr; | 
|  |  | 
|  | return brcmf_fil_iovar_data_set(ifp, "p2p_ifdel", addr, ETH_ALEN); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_create_p2pdev() - create a P2P_DEVICE virtual interface. | 
|  | * | 
|  | * @p2p: P2P specific data. | 
|  | * @wiphy: wiphy device of new interface. | 
|  | * @addr: mac address for this new interface. | 
|  | */ | 
|  | static struct wireless_dev *brcmf_p2p_create_p2pdev(struct brcmf_p2p_info *p2p, | 
|  | struct wiphy *wiphy, | 
|  | u8 *addr) | 
|  | { | 
|  | struct brcmf_cfg80211_vif *p2p_vif; | 
|  | struct brcmf_if *p2p_ifp; | 
|  | struct brcmf_if *pri_ifp; | 
|  | int err; | 
|  | u32 bssidx; | 
|  |  | 
|  | if (p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif) | 
|  | return ERR_PTR(-ENOSPC); | 
|  |  | 
|  | p2p_vif = brcmf_alloc_vif(p2p->cfg, NL80211_IFTYPE_P2P_DEVICE, | 
|  | false); | 
|  | if (IS_ERR(p2p_vif)) { | 
|  | brcmf_err("could not create discovery vif\n"); | 
|  | return (struct wireless_dev *)p2p_vif; | 
|  | } | 
|  |  | 
|  | pri_ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; | 
|  | brcmf_p2p_generate_bss_mac(p2p, addr); | 
|  | brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr); | 
|  |  | 
|  | brcmf_cfg80211_arm_vif_event(p2p->cfg, p2p_vif); | 
|  |  | 
|  | /* Initialize P2P Discovery in the firmware */ | 
|  | err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1); | 
|  | if (err < 0) { | 
|  | brcmf_err("set p2p_disc error\n"); | 
|  | brcmf_cfg80211_arm_vif_event(p2p->cfg, NULL); | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | /* wait for firmware event */ | 
|  | err = brcmf_cfg80211_wait_vif_event_timeout(p2p->cfg, BRCMF_E_IF_ADD, | 
|  | msecs_to_jiffies(1500)); | 
|  | brcmf_cfg80211_arm_vif_event(p2p->cfg, NULL); | 
|  | if (!err) { | 
|  | brcmf_err("timeout occurred\n"); | 
|  | err = -EIO; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | /* discovery interface created */ | 
|  | p2p_ifp = p2p_vif->ifp; | 
|  | p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif; | 
|  | memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN); | 
|  | memcpy(&p2p_vif->wdev.address, p2p->dev_addr, sizeof(p2p->dev_addr)); | 
|  |  | 
|  | /* verify bsscfg index for P2P discovery */ | 
|  | err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx); | 
|  | if (err < 0) { | 
|  | brcmf_err("retrieving discover bsscfg index failed\n"); | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | WARN_ON(p2p_ifp->bssidx != bssidx); | 
|  |  | 
|  | init_completion(&p2p->send_af_done); | 
|  | INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler); | 
|  | init_completion(&p2p->afx_hdl.act_frm_scan); | 
|  | init_completion(&p2p->wait_next_af); | 
|  |  | 
|  | return &p2p_vif->wdev; | 
|  |  | 
|  | fail: | 
|  | brcmf_free_vif(p2p_vif); | 
|  | return ERR_PTR(err); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_delete_p2pdev() - delete P2P_DEVICE virtual interface. | 
|  | * | 
|  | * @vif: virtual interface object to delete. | 
|  | */ | 
|  | static void brcmf_p2p_delete_p2pdev(struct brcmf_p2p_info *p2p, | 
|  | struct brcmf_cfg80211_vif *vif) | 
|  | { | 
|  | cfg80211_unregister_wdev(&vif->wdev); | 
|  | p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; | 
|  | brcmf_free_vif(vif); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_add_vif() - create a new P2P virtual interface. | 
|  | * | 
|  | * @wiphy: wiphy device of new interface. | 
|  | * @name: name of the new interface. | 
|  | * @name_assign_type: origin of the interface name | 
|  | * @type: nl80211 interface type. | 
|  | * @flags: not used. | 
|  | * @params: contains mac address for P2P device. | 
|  | */ | 
|  | struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, | 
|  | unsigned char name_assign_type, | 
|  | enum nl80211_iftype type, u32 *flags, | 
|  | struct vif_params *params) | 
|  | { | 
|  | struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); | 
|  | struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg)); | 
|  | struct brcmf_cfg80211_vif *vif; | 
|  | enum brcmf_fil_p2p_if_types iftype; | 
|  | int err; | 
|  |  | 
|  | if (brcmf_cfg80211_vif_event_armed(cfg)) | 
|  | return ERR_PTR(-EBUSY); | 
|  |  | 
|  | brcmf_dbg(INFO, "adding vif \"%s\" (type=%d)\n", name, type); | 
|  |  | 
|  | switch (type) { | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | iftype = BRCMF_FIL_P2P_IF_CLIENT; | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | iftype = BRCMF_FIL_P2P_IF_GO; | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_DEVICE: | 
|  | return brcmf_p2p_create_p2pdev(&cfg->p2p, wiphy, | 
|  | params->macaddr); | 
|  | default: | 
|  | return ERR_PTR(-EOPNOTSUPP); | 
|  | } | 
|  |  | 
|  | vif = brcmf_alloc_vif(cfg, type, false); | 
|  | if (IS_ERR(vif)) | 
|  | return (struct wireless_dev *)vif; | 
|  | brcmf_cfg80211_arm_vif_event(cfg, vif); | 
|  |  | 
|  | err = brcmf_p2p_request_p2p_if(&cfg->p2p, ifp, cfg->p2p.int_addr, | 
|  | iftype); | 
|  | if (err) { | 
|  | brcmf_cfg80211_arm_vif_event(cfg, NULL); | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | /* wait for firmware event */ | 
|  | err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_ADD, | 
|  | msecs_to_jiffies(1500)); | 
|  | brcmf_cfg80211_arm_vif_event(cfg, NULL); | 
|  | if (!err) { | 
|  | brcmf_err("timeout occurred\n"); | 
|  | err = -EIO; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | /* interface created in firmware */ | 
|  | ifp = vif->ifp; | 
|  | if (!ifp) { | 
|  | brcmf_err("no if pointer provided\n"); | 
|  | err = -ENOENT; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | strncpy(ifp->ndev->name, name, sizeof(ifp->ndev->name) - 1); | 
|  | ifp->ndev->name_assign_type = name_assign_type; | 
|  | err = brcmf_net_attach(ifp, true); | 
|  | if (err) { | 
|  | brcmf_err("Registering netdevice failed\n"); | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | cfg->p2p.bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = vif; | 
|  | /* Disable firmware roaming for P2P interface  */ | 
|  | brcmf_fil_iovar_int_set(ifp, "roam_off", 1); | 
|  | if (iftype == BRCMF_FIL_P2P_IF_GO) { | 
|  | /* set station timeout for p2p */ | 
|  | brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCB_TIMEOUT, | 
|  | BRCMF_SCB_TIMEOUT_VALUE); | 
|  | } | 
|  | return &ifp->vif->wdev; | 
|  |  | 
|  | fail: | 
|  | brcmf_free_vif(vif); | 
|  | return ERR_PTR(err); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * brcmf_p2p_del_vif() - delete a P2P virtual interface. | 
|  | * | 
|  | * @wiphy: wiphy device of interface. | 
|  | * @wdev: wireless device of interface. | 
|  | */ | 
|  | int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) | 
|  | { | 
|  | struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); | 
|  | struct brcmf_p2p_info *p2p = &cfg->p2p; | 
|  | struct brcmf_cfg80211_vif *vif; | 
|  | unsigned long jiffie_timeout = msecs_to_jiffies(1500); | 
|  | bool wait_for_disable = false; | 
|  | int err; | 
|  |  | 
|  | brcmf_dbg(TRACE, "delete P2P vif\n"); | 
|  | vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); | 
|  |  | 
|  | switch (vif->wdev.iftype) { | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | if (test_bit(BRCMF_VIF_STATUS_DISCONNECTING, &vif->sme_state)) | 
|  | wait_for_disable = true; | 
|  | break; | 
|  |  | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | if (!brcmf_p2p_disable_p2p_if(vif)) | 
|  | wait_for_disable = true; | 
|  | break; | 
|  |  | 
|  | case NL80211_IFTYPE_P2P_DEVICE: | 
|  | brcmf_p2p_delete_p2pdev(p2p, vif); | 
|  | return 0; | 
|  | default: | 
|  | return -ENOTSUPP; | 
|  | } | 
|  |  | 
|  | clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); | 
|  | brcmf_dbg(INFO, "P2P: GO_NEG_PHASE status cleared\n"); | 
|  |  | 
|  | if (wait_for_disable) | 
|  | wait_for_completion_timeout(&cfg->vif_disabled, | 
|  | msecs_to_jiffies(500)); | 
|  |  | 
|  | brcmf_vif_clear_mgmt_ies(vif); | 
|  |  | 
|  | brcmf_cfg80211_arm_vif_event(cfg, vif); | 
|  | err = brcmf_p2p_release_p2p_if(vif); | 
|  | if (!err) { | 
|  | /* wait for firmware event */ | 
|  | err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL, | 
|  | jiffie_timeout); | 
|  | if (!err) | 
|  | err = -EIO; | 
|  | else | 
|  | err = 0; | 
|  | } | 
|  | brcmf_cfg80211_arm_vif_event(cfg, NULL); | 
|  | p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev) | 
|  | { | 
|  | struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); | 
|  | struct brcmf_p2p_info *p2p = &cfg->p2p; | 
|  | struct brcmf_cfg80211_vif *vif; | 
|  | int err; | 
|  |  | 
|  | vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); | 
|  | mutex_lock(&cfg->usr_sync); | 
|  | err = brcmf_p2p_enable_discovery(p2p); | 
|  | if (!err) | 
|  | set_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state); | 
|  | mutex_unlock(&cfg->usr_sync); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev) | 
|  | { | 
|  | struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); | 
|  | struct brcmf_p2p_info *p2p = &cfg->p2p; | 
|  | struct brcmf_cfg80211_vif *vif; | 
|  |  | 
|  | vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); | 
|  | mutex_lock(&cfg->usr_sync); | 
|  | (void)brcmf_p2p_deinit_discovery(p2p); | 
|  | brcmf_abort_scanning(cfg); | 
|  | clear_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state); | 
|  | mutex_unlock(&cfg->usr_sync); | 
|  | } |