|  | /****************************************************************************** | 
|  | * | 
|  | * Copyright(c) 2009-2012  Realtek Corporation. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of version 2 of the GNU General Public License as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * The full GNU General Public License is included in this distribution in the | 
|  | * file called LICENSE. | 
|  | * | 
|  | * Contact Information: | 
|  | * wlanfae <wlanfae@realtek.com> | 
|  | * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, | 
|  | * Hsinchu 300, Taiwan. | 
|  | * | 
|  | * Larry Finger <Larry.Finger@lwfinger.net> | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | #include "wifi.h" | 
|  | #include "core.h" | 
|  | #include "cam.h" | 
|  | #include "base.h" | 
|  | #include "ps.h" | 
|  | #include "pwrseqcmd.h" | 
|  |  | 
|  | #include "btcoexist/rtl_btc.h" | 
|  | #include <linux/firmware.h> | 
|  | #include <linux/export.h> | 
|  | #include <net/cfg80211.h> | 
|  |  | 
|  | void rtl_addr_delay(u32 addr) | 
|  | { | 
|  | if (addr == 0xfe) | 
|  | mdelay(50); | 
|  | else if (addr == 0xfd) | 
|  | mdelay(5); | 
|  | else if (addr == 0xfc) | 
|  | mdelay(1); | 
|  | else if (addr == 0xfb) | 
|  | udelay(50); | 
|  | else if (addr == 0xfa) | 
|  | udelay(5); | 
|  | else if (addr == 0xf9) | 
|  | udelay(1); | 
|  | } | 
|  | EXPORT_SYMBOL(rtl_addr_delay); | 
|  |  | 
|  | void rtl_rfreg_delay(struct ieee80211_hw *hw, enum radio_path rfpath, u32 addr, | 
|  | u32 mask, u32 data) | 
|  | { | 
|  | if (addr == 0xfe) { | 
|  | mdelay(50); | 
|  | } else if (addr == 0xfd) { | 
|  | mdelay(5); | 
|  | } else if (addr == 0xfc) { | 
|  | mdelay(1); | 
|  | } else if (addr == 0xfb) { | 
|  | udelay(50); | 
|  | } else if (addr == 0xfa) { | 
|  | udelay(5); | 
|  | } else if (addr == 0xf9) { | 
|  | udelay(1); | 
|  | } else { | 
|  | rtl_set_rfreg(hw, rfpath, addr, mask, data); | 
|  | udelay(1); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL(rtl_rfreg_delay); | 
|  |  | 
|  | void rtl_bb_delay(struct ieee80211_hw *hw, u32 addr, u32 data) | 
|  | { | 
|  | if (addr == 0xfe) { | 
|  | mdelay(50); | 
|  | } else if (addr == 0xfd) { | 
|  | mdelay(5); | 
|  | } else if (addr == 0xfc) { | 
|  | mdelay(1); | 
|  | } else if (addr == 0xfb) { | 
|  | udelay(50); | 
|  | } else if (addr == 0xfa) { | 
|  | udelay(5); | 
|  | } else if (addr == 0xf9) { | 
|  | udelay(1); | 
|  | } else { | 
|  | rtl_set_bbreg(hw, addr, MASKDWORD, data); | 
|  | udelay(1); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL(rtl_bb_delay); | 
|  |  | 
|  | static void rtl_fw_do_work(const struct firmware *firmware, void *context, | 
|  | bool is_wow) | 
|  | { | 
|  | struct ieee80211_hw *hw = context; | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | int err; | 
|  |  | 
|  | RT_TRACE(rtlpriv, COMP_ERR, DBG_LOUD, | 
|  | "Firmware callback routine entered!\n"); | 
|  | complete(&rtlpriv->firmware_loading_complete); | 
|  | if (!firmware) { | 
|  | if (rtlpriv->cfg->alt_fw_name) { | 
|  | err = request_firmware(&firmware, | 
|  | rtlpriv->cfg->alt_fw_name, | 
|  | rtlpriv->io.dev); | 
|  | pr_info("Loading alternative firmware %s\n", | 
|  | rtlpriv->cfg->alt_fw_name); | 
|  | if (!err) | 
|  | goto found_alt; | 
|  | } | 
|  | pr_err("Firmware %s not available\n", rtlpriv->cfg->fw_name); | 
|  | rtlpriv->max_fw_size = 0; | 
|  | return; | 
|  | } | 
|  | found_alt: | 
|  | if (firmware->size > rtlpriv->max_fw_size) { | 
|  | RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, | 
|  | "Firmware is too big!\n"); | 
|  | release_firmware(firmware); | 
|  | return; | 
|  | } | 
|  | if (!is_wow) { | 
|  | memcpy(rtlpriv->rtlhal.pfirmware, firmware->data, | 
|  | firmware->size); | 
|  | rtlpriv->rtlhal.fwsize = firmware->size; | 
|  | } else { | 
|  | memcpy(rtlpriv->rtlhal.wowlan_firmware, firmware->data, | 
|  | firmware->size); | 
|  | rtlpriv->rtlhal.wowlan_fwsize = firmware->size; | 
|  | } | 
|  | rtlpriv->rtlhal.fwsize = firmware->size; | 
|  | release_firmware(firmware); | 
|  | } | 
|  |  | 
|  | void rtl_fw_cb(const struct firmware *firmware, void *context) | 
|  | { | 
|  | rtl_fw_do_work(firmware, context, false); | 
|  | } | 
|  | EXPORT_SYMBOL(rtl_fw_cb); | 
|  |  | 
|  | void rtl_wowlan_fw_cb(const struct firmware *firmware, void *context) | 
|  | { | 
|  | rtl_fw_do_work(firmware, context, true); | 
|  | } | 
|  | EXPORT_SYMBOL(rtl_wowlan_fw_cb); | 
|  |  | 
|  | /*mutex for start & stop is must here. */ | 
|  | static int rtl_op_start(struct ieee80211_hw *hw) | 
|  | { | 
|  | int err = 0; | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); | 
|  |  | 
|  | if (!is_hal_stop(rtlhal)) | 
|  | return 0; | 
|  | if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status)) | 
|  | return 0; | 
|  | mutex_lock(&rtlpriv->locks.conf_mutex); | 
|  | err = rtlpriv->intf_ops->adapter_start(hw); | 
|  | if (!err) | 
|  | rtl_watch_dog_timer_callback((unsigned long)hw); | 
|  | mutex_unlock(&rtlpriv->locks.conf_mutex); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void rtl_op_stop(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); | 
|  | struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); | 
|  | struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); | 
|  | bool support_remote_wakeup = false; | 
|  |  | 
|  | if (is_hal_stop(rtlhal)) | 
|  | return; | 
|  |  | 
|  | rtlpriv->cfg->ops->get_hw_reg(hw, HAL_DEF_WOWLAN, | 
|  | (u8 *)(&support_remote_wakeup)); | 
|  | /* here is must, because adhoc do stop and start, | 
|  | * but stop with RFOFF may cause something wrong, | 
|  | * like adhoc TP | 
|  | */ | 
|  | if (unlikely(ppsc->rfpwr_state == ERFOFF)) | 
|  | rtl_ips_nic_on(hw); | 
|  |  | 
|  | mutex_lock(&rtlpriv->locks.conf_mutex); | 
|  | /* if wowlan supported, DON'T clear connected info */ | 
|  | if (!(support_remote_wakeup && | 
|  | rtlhal->enter_pnp_sleep)) { | 
|  | mac->link_state = MAC80211_NOLINK; | 
|  | eth_zero_addr(mac->bssid); | 
|  | mac->vendor = PEER_UNKNOWN; | 
|  |  | 
|  | /* reset sec info */ | 
|  | rtl_cam_reset_sec_info(hw); | 
|  |  | 
|  | rtl_deinit_deferred_work(hw); | 
|  | } | 
|  | rtlpriv->intf_ops->adapter_stop(hw); | 
|  |  | 
|  | mutex_unlock(&rtlpriv->locks.conf_mutex); | 
|  | } | 
|  |  | 
|  | static void rtl_op_tx(struct ieee80211_hw *hw, | 
|  | struct ieee80211_tx_control *control, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); | 
|  | struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); | 
|  | struct rtl_tcb_desc tcb_desc; | 
|  | memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc)); | 
|  |  | 
|  | if (unlikely(is_hal_stop(rtlhal) || ppsc->rfpwr_state != ERFON)) | 
|  | goto err_free; | 
|  |  | 
|  | if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status)) | 
|  | goto err_free; | 
|  |  | 
|  | if (!rtlpriv->intf_ops->waitq_insert(hw, control->sta, skb)) | 
|  | rtlpriv->intf_ops->adapter_tx(hw, control->sta, skb, &tcb_desc); | 
|  | return; | 
|  |  | 
|  | err_free: | 
|  | dev_kfree_skb_any(skb); | 
|  | } | 
|  |  | 
|  | static int rtl_op_add_interface(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); | 
|  | int err = 0; | 
|  |  | 
|  | if (mac->vif) { | 
|  | RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, | 
|  | "vif has been set!! mac->vif = 0x%p\n", mac->vif); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER; | 
|  |  | 
|  | rtl_ips_nic_on(hw); | 
|  |  | 
|  | mutex_lock(&rtlpriv->locks.conf_mutex); | 
|  | switch (ieee80211_vif_type_p2p(vif)) { | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | mac->p2p = P2P_ROLE_CLIENT; | 
|  | /*fall through*/ | 
|  | case NL80211_IFTYPE_STATION: | 
|  | if (mac->beacon_enabled == 1) { | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "NL80211_IFTYPE_STATION\n"); | 
|  | mac->beacon_enabled = 0; | 
|  | rtlpriv->cfg->ops->update_interrupt_mask(hw, 0, | 
|  | rtlpriv->cfg->maps[RTL_IBSS_INT_MASKS]); | 
|  | } | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "NL80211_IFTYPE_ADHOC\n"); | 
|  |  | 
|  | mac->link_state = MAC80211_LINKED; | 
|  | rtlpriv->cfg->ops->set_bcn_reg(hw); | 
|  | if (rtlpriv->rtlhal.current_bandtype == BAND_ON_2_4G) | 
|  | mac->basic_rates = 0xfff; | 
|  | else | 
|  | mac->basic_rates = 0xff0; | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE, | 
|  | (u8 *)(&mac->basic_rates)); | 
|  |  | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | mac->p2p = P2P_ROLE_GO; | 
|  | /*fall through*/ | 
|  | case NL80211_IFTYPE_AP: | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "NL80211_IFTYPE_AP\n"); | 
|  |  | 
|  | mac->link_state = MAC80211_LINKED; | 
|  | rtlpriv->cfg->ops->set_bcn_reg(hw); | 
|  | if (rtlpriv->rtlhal.current_bandtype == BAND_ON_2_4G) | 
|  | mac->basic_rates = 0xfff; | 
|  | else | 
|  | mac->basic_rates = 0xff0; | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE, | 
|  | (u8 *)(&mac->basic_rates)); | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "NL80211_IFTYPE_MESH_POINT\n"); | 
|  |  | 
|  | mac->link_state = MAC80211_LINKED; | 
|  | rtlpriv->cfg->ops->set_bcn_reg(hw); | 
|  | if (rtlpriv->rtlhal.current_bandtype == BAND_ON_2_4G) | 
|  | mac->basic_rates = 0xfff; | 
|  | else | 
|  | mac->basic_rates = 0xff0; | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE, | 
|  | (u8 *)(&mac->basic_rates)); | 
|  | break; | 
|  | default: | 
|  | RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, | 
|  | "operation mode %d is not support!\n", vif->type); | 
|  | err = -EOPNOTSUPP; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (mac->p2p) { | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "p2p role %x\n", vif->type); | 
|  | mac->basic_rates = 0xff0;/*disable cck rate for p2p*/ | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE, | 
|  | (u8 *)(&mac->basic_rates)); | 
|  | } | 
|  | mac->vif = vif; | 
|  | mac->opmode = vif->type; | 
|  | rtlpriv->cfg->ops->set_network_type(hw, vif->type); | 
|  | memcpy(mac->mac_addr, vif->addr, ETH_ALEN); | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr); | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&rtlpriv->locks.conf_mutex); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void rtl_op_remove_interface(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); | 
|  |  | 
|  | mutex_lock(&rtlpriv->locks.conf_mutex); | 
|  |  | 
|  | /* Free beacon resources */ | 
|  | if ((vif->type == NL80211_IFTYPE_AP) || | 
|  | (vif->type == NL80211_IFTYPE_ADHOC) || | 
|  | (vif->type == NL80211_IFTYPE_MESH_POINT)) { | 
|  | if (mac->beacon_enabled == 1) { | 
|  | mac->beacon_enabled = 0; | 
|  | rtlpriv->cfg->ops->update_interrupt_mask(hw, 0, | 
|  | rtlpriv->cfg->maps[RTL_IBSS_INT_MASKS]); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | *Note: We assume NL80211_IFTYPE_UNSPECIFIED as | 
|  | *NO LINK for our hardware. | 
|  | */ | 
|  | mac->p2p = 0; | 
|  | mac->vif = NULL; | 
|  | mac->link_state = MAC80211_NOLINK; | 
|  | eth_zero_addr(mac->bssid); | 
|  | mac->vendor = PEER_UNKNOWN; | 
|  | mac->opmode = NL80211_IFTYPE_UNSPECIFIED; | 
|  | rtlpriv->cfg->ops->set_network_type(hw, mac->opmode); | 
|  |  | 
|  | mutex_unlock(&rtlpriv->locks.conf_mutex); | 
|  | } | 
|  | static int rtl_op_change_interface(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | enum nl80211_iftype new_type, bool p2p) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | int ret; | 
|  | rtl_op_remove_interface(hw, vif); | 
|  |  | 
|  | vif->type = new_type; | 
|  | vif->p2p = p2p; | 
|  | ret = rtl_op_add_interface(hw, vif); | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "p2p  %x\n", p2p); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static u16 crc16_ccitt(u8 data, u16 crc) | 
|  | { | 
|  | u8 shift_in, data_bit, crc_bit11, crc_bit4, crc_bit15; | 
|  | u8 i; | 
|  | u16 result; | 
|  |  | 
|  | for (i = 0; i < 8; i++) { | 
|  | crc_bit15 = ((crc & BIT(15)) ? 1 : 0); | 
|  | data_bit  = (data & (BIT(0) << i) ? 1 : 0); | 
|  | shift_in = crc_bit15 ^ data_bit; | 
|  |  | 
|  | result = crc << 1; | 
|  | if (shift_in == 0) | 
|  | result &= (~BIT(0)); | 
|  | else | 
|  | result |= BIT(0); | 
|  |  | 
|  | crc_bit11 = ((crc & BIT(11)) ? 1 : 0) ^ shift_in; | 
|  | if (crc_bit11 == 0) | 
|  | result &= (~BIT(12)); | 
|  | else | 
|  | result |= BIT(12); | 
|  |  | 
|  | crc_bit4 = ((crc & BIT(4)) ? 1 : 0) ^ shift_in; | 
|  | if (crc_bit4 == 0) | 
|  | result &= (~BIT(5)); | 
|  | else | 
|  | result |= BIT(5); | 
|  |  | 
|  | crc = result; | 
|  | } | 
|  |  | 
|  | return crc; | 
|  | } | 
|  |  | 
|  | static u16 _calculate_wol_pattern_crc(u8 *pattern, u16 len) | 
|  | { | 
|  | u16 crc = 0xffff; | 
|  | u32 i; | 
|  |  | 
|  | for (i = 0; i < len; i++) | 
|  | crc = crc16_ccitt(pattern[i], crc); | 
|  |  | 
|  | crc = ~crc; | 
|  |  | 
|  | return crc; | 
|  | } | 
|  |  | 
|  | static void _rtl_add_wowlan_patterns(struct ieee80211_hw *hw, | 
|  | struct cfg80211_wowlan *wow) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_mac *mac = &rtlpriv->mac80211; | 
|  | struct cfg80211_pkt_pattern *patterns = wow->patterns; | 
|  | struct rtl_wow_pattern rtl_pattern; | 
|  | const u8 *pattern_os, *mask_os; | 
|  | u8 mask[MAX_WOL_BIT_MASK_SIZE] = {0}; | 
|  | u8 content[MAX_WOL_PATTERN_SIZE] = {0}; | 
|  | u8 broadcast_addr[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; | 
|  | u8 multicast_addr1[2] = {0x33, 0x33}; | 
|  | u8 multicast_addr2[3] = {0x01, 0x00, 0x5e}; | 
|  | u8 i, mask_len; | 
|  | u16 j, len; | 
|  |  | 
|  | for (i = 0; i < wow->n_patterns; i++) { | 
|  | memset(&rtl_pattern, 0, sizeof(struct rtl_wow_pattern)); | 
|  | memset(mask, 0, MAX_WOL_BIT_MASK_SIZE); | 
|  | if (patterns[i].pattern_len > MAX_WOL_PATTERN_SIZE) { | 
|  | RT_TRACE(rtlpriv, COMP_POWER, DBG_WARNING, | 
|  | "Pattern[%d] is too long\n", i); | 
|  | continue; | 
|  | } | 
|  | pattern_os = patterns[i].pattern; | 
|  | mask_len = DIV_ROUND_UP(patterns[i].pattern_len, 8); | 
|  | mask_os = patterns[i].mask; | 
|  | RT_PRINT_DATA(rtlpriv, COMP_POWER, DBG_TRACE, | 
|  | "pattern content\n", pattern_os, | 
|  | patterns[i].pattern_len); | 
|  | RT_PRINT_DATA(rtlpriv, COMP_POWER, DBG_TRACE, | 
|  | "mask content\n", mask_os, mask_len); | 
|  | /* 1. unicast? multicast? or broadcast? */ | 
|  | if (memcmp(pattern_os, broadcast_addr, 6) == 0) | 
|  | rtl_pattern.type = BROADCAST_PATTERN; | 
|  | else if (memcmp(pattern_os, multicast_addr1, 2) == 0 || | 
|  | memcmp(pattern_os, multicast_addr2, 3) == 0) | 
|  | rtl_pattern.type = MULTICAST_PATTERN; | 
|  | else if  (memcmp(pattern_os, mac->mac_addr, 6) == 0) | 
|  | rtl_pattern.type = UNICAST_PATTERN; | 
|  | else | 
|  | rtl_pattern.type = UNKNOWN_TYPE; | 
|  |  | 
|  | /* 2. translate mask_from_os to mask_for_hw */ | 
|  |  | 
|  | /****************************************************************************** | 
|  | * pattern from OS uses 'ethenet frame', like this: | 
|  |  | 
|  | |    6   |    6   |   2  |     20    |  Variable  |	4  | | 
|  | |--------+--------+------+-----------+------------+-----| | 
|  | |    802.3 Mac Header    | IP Header | TCP Packet | FCS | | 
|  | |   DA   |   SA   | Type | | 
|  |  | 
|  | * BUT, packet catched by our HW is in '802.11 frame', begin from LLC, | 
|  |  | 
|  | |     24 or 30      |    6   |   2  |     20    |  Variable  |  4  | | 
|  | |-------------------+--------+------+-----------+------------+-----| | 
|  | | 802.11 MAC Header |       LLC     | IP Header | TCP Packet | FCS | | 
|  | | Others | Tpye | | 
|  |  | 
|  | * Therefore, we need translate mask_from_OS to mask_to_hw. | 
|  | * We should left-shift mask by 6 bits, then set the new bit[0~5] = 0, | 
|  | * because new mask[0~5] means 'SA', but our HW packet begins from LLC, | 
|  | * bit[0~5] corresponds to first 6 Bytes in LLC, they just don't match. | 
|  | ******************************************************************************/ | 
|  |  | 
|  | /* Shift 6 bits */ | 
|  | for (j = 0; j < mask_len - 1; j++) { | 
|  | mask[j] = mask_os[j] >> 6; | 
|  | mask[j] |= (mask_os[j + 1] & 0x3F) << 2; | 
|  | } | 
|  | mask[j] = (mask_os[j] >> 6) & 0x3F; | 
|  | /* Set bit 0-5 to zero */ | 
|  | mask[0] &= 0xC0; | 
|  |  | 
|  | RT_PRINT_DATA(rtlpriv, COMP_POWER, DBG_TRACE, | 
|  | "mask to hw\n", mask, mask_len); | 
|  | for (j = 0; j < (MAX_WOL_BIT_MASK_SIZE + 1) / 4; j++) { | 
|  | rtl_pattern.mask[j] = mask[j * 4]; | 
|  | rtl_pattern.mask[j] |= (mask[j * 4 + 1] << 8); | 
|  | rtl_pattern.mask[j] |= (mask[j * 4 + 2] << 16); | 
|  | rtl_pattern.mask[j] |= (mask[j * 4 + 3] << 24); | 
|  | } | 
|  |  | 
|  | /* To get the wake up pattern from the mask. | 
|  | * We do not count first 12 bits which means | 
|  | * DA[6] and SA[6] in the pattern to match HW design. | 
|  | */ | 
|  | len = 0; | 
|  | for (j = 12; j < patterns[i].pattern_len; j++) { | 
|  | if ((mask_os[j / 8] >> (j % 8)) & 0x01) { | 
|  | content[len] = pattern_os[j]; | 
|  | len++; | 
|  | } | 
|  | } | 
|  |  | 
|  | RT_PRINT_DATA(rtlpriv, COMP_POWER, DBG_TRACE, | 
|  | "pattern to hw\n", content, len); | 
|  | /* 3. calculate crc */ | 
|  | rtl_pattern.crc = _calculate_wol_pattern_crc(content, len); | 
|  | RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE, | 
|  | "CRC_Remainder = 0x%x", rtl_pattern.crc); | 
|  |  | 
|  | /* 4. write crc & mask_for_hw to hw */ | 
|  | rtlpriv->cfg->ops->add_wowlan_pattern(hw, &rtl_pattern, i); | 
|  | } | 
|  | rtl_write_byte(rtlpriv, 0x698, wow->n_patterns); | 
|  | } | 
|  |  | 
|  | static int rtl_op_suspend(struct ieee80211_hw *hw, | 
|  | struct cfg80211_wowlan *wow) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_hal *rtlhal = rtl_hal(rtlpriv); | 
|  | struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); | 
|  | struct timeval ts; | 
|  |  | 
|  | RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, "\n"); | 
|  | if (WARN_ON(!wow)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* to resolve s4 can not wake up*/ | 
|  | do_gettimeofday(&ts); | 
|  | rtlhal->last_suspend_sec = ts.tv_sec; | 
|  |  | 
|  | if ((ppsc->wo_wlan_mode & WAKE_ON_PATTERN_MATCH) && wow->n_patterns) | 
|  | _rtl_add_wowlan_patterns(hw, wow); | 
|  |  | 
|  | rtlhal->driver_is_goingto_unload = true; | 
|  | rtlhal->enter_pnp_sleep = true; | 
|  |  | 
|  | rtl_lps_leave(hw); | 
|  | rtl_op_stop(hw); | 
|  | device_set_wakeup_enable(wiphy_dev(hw->wiphy), true); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rtl_op_resume(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_hal *rtlhal = rtl_hal(rtlpriv); | 
|  | struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); | 
|  | struct timeval ts; | 
|  |  | 
|  | RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, "\n"); | 
|  | rtlhal->driver_is_goingto_unload = false; | 
|  | rtlhal->enter_pnp_sleep = false; | 
|  | rtlhal->wake_from_pnp_sleep = true; | 
|  |  | 
|  | /* to resovle s4 can not wake up*/ | 
|  | do_gettimeofday(&ts); | 
|  | if (ts.tv_sec - rtlhal->last_suspend_sec < 5) | 
|  | return -1; | 
|  |  | 
|  | rtl_op_start(hw); | 
|  | device_set_wakeup_enable(wiphy_dev(hw->wiphy), false); | 
|  | ieee80211_resume_disconnect(mac->vif); | 
|  | rtlhal->wake_from_pnp_sleep = false; | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int rtl_op_config(struct ieee80211_hw *hw, u32 changed) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_phy *rtlphy = &(rtlpriv->phy); | 
|  | struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); | 
|  | struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); | 
|  | struct ieee80211_conf *conf = &hw->conf; | 
|  |  | 
|  | if (mac->skip_scan) | 
|  | return 1; | 
|  |  | 
|  | mutex_lock(&rtlpriv->locks.conf_mutex); | 
|  | if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {	/* BIT(2)*/ | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "IEEE80211_CONF_CHANGE_LISTEN_INTERVAL\n"); | 
|  | } | 
|  |  | 
|  | /*For IPS */ | 
|  | if (changed & IEEE80211_CONF_CHANGE_IDLE) { | 
|  | if (hw->conf.flags & IEEE80211_CONF_IDLE) | 
|  | rtl_ips_nic_off(hw); | 
|  | else | 
|  | rtl_ips_nic_on(hw); | 
|  | } else { | 
|  | /* | 
|  | *although rfoff may not cause by ips, but we will | 
|  | *check the reason in set_rf_power_state function | 
|  | */ | 
|  | if (unlikely(ppsc->rfpwr_state == ERFOFF)) | 
|  | rtl_ips_nic_on(hw); | 
|  | } | 
|  |  | 
|  | /*For LPS */ | 
|  | if (changed & IEEE80211_CONF_CHANGE_PS) { | 
|  | cancel_delayed_work(&rtlpriv->works.ps_work); | 
|  | cancel_delayed_work(&rtlpriv->works.ps_rfon_wq); | 
|  | if (conf->flags & IEEE80211_CONF_PS) { | 
|  | rtlpriv->psc.sw_ps_enabled = true; | 
|  | /* sleep here is must, or we may recv the beacon and | 
|  | * cause mac80211 into wrong ps state, this will cause | 
|  | * power save nullfunc send fail, and further cause | 
|  | * pkt loss, So sleep must quickly but not immediatly | 
|  | * because that will cause nullfunc send by mac80211 | 
|  | * fail, and cause pkt loss, we have tested that 5mA | 
|  | * is worked very well */ | 
|  | if (!rtlpriv->psc.multi_buffered) | 
|  | queue_delayed_work(rtlpriv->works.rtl_wq, | 
|  | &rtlpriv->works.ps_work, | 
|  | MSECS(5)); | 
|  | } else { | 
|  | rtl_swlps_rf_awake(hw); | 
|  | rtlpriv->psc.sw_ps_enabled = false; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) { | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "IEEE80211_CONF_CHANGE_RETRY_LIMITS %x\n", | 
|  | hw->conf.long_frame_max_tx_count); | 
|  | mac->retry_long = hw->conf.long_frame_max_tx_count; | 
|  | mac->retry_short = hw->conf.long_frame_max_tx_count; | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RETRY_LIMIT, | 
|  | (u8 *)(&hw->conf.long_frame_max_tx_count)); | 
|  | } | 
|  |  | 
|  | if (changed & IEEE80211_CONF_CHANGE_CHANNEL && | 
|  | !rtlpriv->proximity.proxim_on) { | 
|  | struct ieee80211_channel *channel = hw->conf.chandef.chan; | 
|  | enum nl80211_chan_width width = hw->conf.chandef.width; | 
|  | enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT; | 
|  | u8 wide_chan = (u8) channel->hw_value; | 
|  |  | 
|  | /* channel_type is for 20&40M */ | 
|  | if (width < NL80211_CHAN_WIDTH_80) | 
|  | channel_type = | 
|  | cfg80211_get_chandef_type(&hw->conf.chandef); | 
|  | if (mac->act_scanning) | 
|  | mac->n_channels++; | 
|  |  | 
|  | if (rtlpriv->dm.supp_phymode_switch && | 
|  | mac->link_state < MAC80211_LINKED && | 
|  | !mac->act_scanning) { | 
|  | if (rtlpriv->cfg->ops->chk_switch_dmdp) | 
|  | rtlpriv->cfg->ops->chk_switch_dmdp(hw); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *because we should back channel to | 
|  | *current_network.chan in in scanning, | 
|  | *So if set_chan == current_network.chan | 
|  | *we should set it. | 
|  | *because mac80211 tell us wrong bw40 | 
|  | *info for cisco1253 bw20, so we modify | 
|  | *it here based on UPPER & LOWER | 
|  | */ | 
|  |  | 
|  | if (width >= NL80211_CHAN_WIDTH_80) { | 
|  | if (width == NL80211_CHAN_WIDTH_80) { | 
|  | u32 center = hw->conf.chandef.center_freq1; | 
|  | u32 primary = | 
|  | (u32)hw->conf.chandef.chan->center_freq; | 
|  |  | 
|  | rtlphy->current_chan_bw = | 
|  | HT_CHANNEL_WIDTH_80; | 
|  | mac->bw_80 = true; | 
|  | mac->bw_40 = true; | 
|  | if (center > primary) { | 
|  | mac->cur_80_prime_sc = | 
|  | PRIME_CHNL_OFFSET_LOWER; | 
|  | if (center - primary == 10) { | 
|  | mac->cur_40_prime_sc = | 
|  | PRIME_CHNL_OFFSET_UPPER; | 
|  |  | 
|  | wide_chan += 2; | 
|  | } else if (center - primary == 30) { | 
|  | mac->cur_40_prime_sc = | 
|  | PRIME_CHNL_OFFSET_LOWER; | 
|  |  | 
|  | wide_chan += 6; | 
|  | } | 
|  | } else { | 
|  | mac->cur_80_prime_sc = | 
|  | PRIME_CHNL_OFFSET_UPPER; | 
|  | if (primary - center == 10) { | 
|  | mac->cur_40_prime_sc = | 
|  | PRIME_CHNL_OFFSET_LOWER; | 
|  |  | 
|  | wide_chan -= 2; | 
|  | } else if (primary - center == 30) { | 
|  | mac->cur_40_prime_sc = | 
|  | PRIME_CHNL_OFFSET_UPPER; | 
|  |  | 
|  | wide_chan -= 6; | 
|  | } | 
|  | } | 
|  | } | 
|  | } else { | 
|  | switch (channel_type) { | 
|  | case NL80211_CHAN_HT20: | 
|  | case NL80211_CHAN_NO_HT: | 
|  | /* SC */ | 
|  | mac->cur_40_prime_sc = | 
|  | PRIME_CHNL_OFFSET_DONT_CARE; | 
|  | rtlphy->current_chan_bw = | 
|  | HT_CHANNEL_WIDTH_20; | 
|  | mac->bw_40 = false; | 
|  | mac->bw_80 = false; | 
|  | break; | 
|  | case NL80211_CHAN_HT40MINUS: | 
|  | /* SC */ | 
|  | mac->cur_40_prime_sc = | 
|  | PRIME_CHNL_OFFSET_UPPER; | 
|  | rtlphy->current_chan_bw = | 
|  | HT_CHANNEL_WIDTH_20_40; | 
|  | mac->bw_40 = true; | 
|  | mac->bw_80 = false; | 
|  |  | 
|  | /*wide channel */ | 
|  | wide_chan -= 2; | 
|  |  | 
|  | break; | 
|  | case NL80211_CHAN_HT40PLUS: | 
|  | /* SC */ | 
|  | mac->cur_40_prime_sc = | 
|  | PRIME_CHNL_OFFSET_LOWER; | 
|  | rtlphy->current_chan_bw = | 
|  | HT_CHANNEL_WIDTH_20_40; | 
|  | mac->bw_40 = true; | 
|  | mac->bw_80 = false; | 
|  |  | 
|  | /*wide channel */ | 
|  | wide_chan += 2; | 
|  |  | 
|  | break; | 
|  | default: | 
|  | mac->bw_40 = false; | 
|  | mac->bw_80 = false; | 
|  | RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, | 
|  | "switch case not processed\n"); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (wide_chan <= 0) | 
|  | wide_chan = 1; | 
|  |  | 
|  | /* In scanning, when before we offchannel we may send a ps=1 | 
|  | * null to AP, and then we may send a ps = 0 null to AP quickly, | 
|  | * but first null may have caused AP to put lots of packet to | 
|  | * hw tx buffer. These packets must be tx'd before we go off | 
|  | * channel so we must delay more time to let AP flush these | 
|  | * packets before going offchannel, or dis-association or | 
|  | * delete BA will be caused by AP | 
|  | */ | 
|  | if (rtlpriv->mac80211.offchan_delay) { | 
|  | rtlpriv->mac80211.offchan_delay = false; | 
|  | mdelay(50); | 
|  | } | 
|  |  | 
|  | rtlphy->current_channel = wide_chan; | 
|  |  | 
|  | rtlpriv->cfg->ops->switch_channel(hw); | 
|  | rtlpriv->cfg->ops->set_channel_access(hw); | 
|  | rtlpriv->cfg->ops->set_bw_mode(hw, channel_type); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&rtlpriv->locks.conf_mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void rtl_op_configure_filter(struct ieee80211_hw *hw, | 
|  | unsigned int changed_flags, | 
|  | unsigned int *new_flags, u64 multicast) | 
|  | { | 
|  | bool update_rcr = false; | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); | 
|  |  | 
|  | *new_flags &= RTL_SUPPORTED_FILTERS; | 
|  | if (0 == changed_flags) | 
|  | return; | 
|  |  | 
|  | /*TODO: we disable broadcase now, so enable here */ | 
|  | if (changed_flags & FIF_ALLMULTI) { | 
|  | if (*new_flags & FIF_ALLMULTI) { | 
|  | mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AM] | | 
|  | rtlpriv->cfg->maps[MAC_RCR_AB]; | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "Enable receive multicast frame\n"); | 
|  | } else { | 
|  | mac->rx_conf &= ~(rtlpriv->cfg->maps[MAC_RCR_AM] | | 
|  | rtlpriv->cfg->maps[MAC_RCR_AB]); | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "Disable receive multicast frame\n"); | 
|  | } | 
|  | update_rcr = true; | 
|  | } | 
|  |  | 
|  | if (changed_flags & FIF_FCSFAIL) { | 
|  | if (*new_flags & FIF_FCSFAIL) { | 
|  | mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACRC32]; | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "Enable receive FCS error frame\n"); | 
|  | } else { | 
|  | mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACRC32]; | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "Disable receive FCS error frame\n"); | 
|  | } | 
|  | if (!update_rcr) | 
|  | update_rcr = true; | 
|  | } | 
|  |  | 
|  | /* if ssid not set to hw don't check bssid | 
|  | * here just used for linked scanning, & linked | 
|  | * and nolink check bssid is set in set network_type | 
|  | */ | 
|  | if ((changed_flags & FIF_BCN_PRBRESP_PROMISC) && | 
|  | (mac->link_state >= MAC80211_LINKED)) { | 
|  | if (mac->opmode != NL80211_IFTYPE_AP && | 
|  | mac->opmode != NL80211_IFTYPE_MESH_POINT) { | 
|  | if (*new_flags & FIF_BCN_PRBRESP_PROMISC) | 
|  | rtlpriv->cfg->ops->set_chk_bssid(hw, false); | 
|  | else | 
|  | rtlpriv->cfg->ops->set_chk_bssid(hw, true); | 
|  | if (update_rcr) | 
|  | update_rcr = false; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (changed_flags & FIF_CONTROL) { | 
|  | if (*new_flags & FIF_CONTROL) { | 
|  | mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACF]; | 
|  |  | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "Enable receive control frame.\n"); | 
|  | } else { | 
|  | mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACF]; | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "Disable receive control frame.\n"); | 
|  | } | 
|  | if (!update_rcr) | 
|  | update_rcr = true; | 
|  | } | 
|  |  | 
|  | if (changed_flags & FIF_OTHER_BSS) { | 
|  | if (*new_flags & FIF_OTHER_BSS) { | 
|  | mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AAP]; | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "Enable receive other BSS's frame.\n"); | 
|  | } else { | 
|  | mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_AAP]; | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "Disable receive other BSS's frame.\n"); | 
|  | } | 
|  | if (!update_rcr) | 
|  | update_rcr = true; | 
|  | } | 
|  |  | 
|  | if (update_rcr) | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, | 
|  | (u8 *)(&mac->rx_conf)); | 
|  | } | 
|  | static int rtl_op_sta_add(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); | 
|  | struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); | 
|  | struct rtl_sta_info *sta_entry; | 
|  |  | 
|  | if (sta) { | 
|  | sta_entry = (struct rtl_sta_info *)sta->drv_priv; | 
|  | spin_lock_bh(&rtlpriv->locks.entry_list_lock); | 
|  | list_add_tail(&sta_entry->list, &rtlpriv->entry_list); | 
|  | spin_unlock_bh(&rtlpriv->locks.entry_list_lock); | 
|  | if (rtlhal->current_bandtype == BAND_ON_2_4G) { | 
|  | sta_entry->wireless_mode = WIRELESS_MODE_G; | 
|  | if (sta->supp_rates[0] <= 0xf) | 
|  | sta_entry->wireless_mode = WIRELESS_MODE_B; | 
|  | if (sta->ht_cap.ht_supported) | 
|  | sta_entry->wireless_mode = WIRELESS_MODE_N_24G; | 
|  |  | 
|  | if (vif->type == NL80211_IFTYPE_ADHOC) | 
|  | sta_entry->wireless_mode = WIRELESS_MODE_G; | 
|  | } else if (rtlhal->current_bandtype == BAND_ON_5G) { | 
|  | sta_entry->wireless_mode = WIRELESS_MODE_A; | 
|  | if (sta->ht_cap.ht_supported) | 
|  | sta_entry->wireless_mode = WIRELESS_MODE_N_5G; | 
|  | if (sta->vht_cap.vht_supported) | 
|  | sta_entry->wireless_mode = WIRELESS_MODE_AC_5G; | 
|  |  | 
|  | if (vif->type == NL80211_IFTYPE_ADHOC) | 
|  | sta_entry->wireless_mode = WIRELESS_MODE_A; | 
|  | } | 
|  | /*disable cck rate for p2p*/ | 
|  | if (mac->p2p) | 
|  | sta->supp_rates[0] &= 0xfffffff0; | 
|  |  | 
|  | memcpy(sta_entry->mac_addr, sta->addr, ETH_ALEN); | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, | 
|  | "Add sta addr is %pM\n", sta->addr); | 
|  | rtlpriv->cfg->ops->update_rate_tbl(hw, sta, 0); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rtl_op_sta_remove(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_sta_info *sta_entry; | 
|  | if (sta) { | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, | 
|  | "Remove sta addr is %pM\n", sta->addr); | 
|  | sta_entry = (struct rtl_sta_info *)sta->drv_priv; | 
|  | sta_entry->wireless_mode = 0; | 
|  | sta_entry->ratr_index = 0; | 
|  | spin_lock_bh(&rtlpriv->locks.entry_list_lock); | 
|  | list_del(&sta_entry->list); | 
|  | spin_unlock_bh(&rtlpriv->locks.entry_list_lock); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | static int _rtl_get_hal_qnum(u16 queue) | 
|  | { | 
|  | int qnum; | 
|  |  | 
|  | switch (queue) { | 
|  | case 0: | 
|  | qnum = AC3_VO; | 
|  | break; | 
|  | case 1: | 
|  | qnum = AC2_VI; | 
|  | break; | 
|  | case 2: | 
|  | qnum = AC0_BE; | 
|  | break; | 
|  | case 3: | 
|  | qnum = AC1_BK; | 
|  | break; | 
|  | default: | 
|  | qnum = AC0_BE; | 
|  | break; | 
|  | } | 
|  | return qnum; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *for mac80211 VO = 0, VI = 1, BE = 2, BK = 3 | 
|  | *for rtl819x  BE = 0, BK = 1, VI = 2, VO = 3 | 
|  | */ | 
|  | static int rtl_op_conf_tx(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, u16 queue, | 
|  | const struct ieee80211_tx_queue_params *param) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); | 
|  | int aci; | 
|  |  | 
|  | if (queue >= AC_MAX) { | 
|  | RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, | 
|  | "queue number %d is incorrect!\n", queue); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | aci = _rtl_get_hal_qnum(queue); | 
|  | mac->ac[aci].aifs = param->aifs; | 
|  | mac->ac[aci].cw_min = cpu_to_le16(param->cw_min); | 
|  | mac->ac[aci].cw_max = cpu_to_le16(param->cw_max); | 
|  | mac->ac[aci].tx_op = cpu_to_le16(param->txop); | 
|  | memcpy(&mac->edca_param[aci], param, sizeof(*param)); | 
|  | rtlpriv->cfg->ops->set_qos(hw, aci); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void send_beacon_frame(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct sk_buff *skb = ieee80211_beacon_get(hw, vif); | 
|  | struct rtl_tcb_desc tcb_desc; | 
|  |  | 
|  | if (skb) { | 
|  | memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc)); | 
|  | rtlpriv->intf_ops->adapter_tx(hw, NULL, skb, &tcb_desc); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void rtl_op_bss_info_changed(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_bss_conf *bss_conf, | 
|  | u32 changed) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_hal *rtlhal = rtl_hal(rtlpriv); | 
|  | struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); | 
|  | struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); | 
|  |  | 
|  | mutex_lock(&rtlpriv->locks.conf_mutex); | 
|  | if ((vif->type == NL80211_IFTYPE_ADHOC) || | 
|  | (vif->type == NL80211_IFTYPE_AP) || | 
|  | (vif->type == NL80211_IFTYPE_MESH_POINT)) { | 
|  | if ((changed & BSS_CHANGED_BEACON) || | 
|  | (changed & BSS_CHANGED_BEACON_ENABLED && | 
|  | bss_conf->enable_beacon)) { | 
|  | if (mac->beacon_enabled == 0) { | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, | 
|  | "BSS_CHANGED_BEACON_ENABLED\n"); | 
|  |  | 
|  | /*start hw beacon interrupt. */ | 
|  | /*rtlpriv->cfg->ops->set_bcn_reg(hw); */ | 
|  | mac->beacon_enabled = 1; | 
|  | rtlpriv->cfg->ops->update_interrupt_mask(hw, | 
|  | rtlpriv->cfg->maps | 
|  | [RTL_IBSS_INT_MASKS], 0); | 
|  |  | 
|  | if (rtlpriv->cfg->ops->linked_set_reg) | 
|  | rtlpriv->cfg->ops->linked_set_reg(hw); | 
|  | send_beacon_frame(hw, vif); | 
|  | } | 
|  | } | 
|  | if ((changed & BSS_CHANGED_BEACON_ENABLED && | 
|  | !bss_conf->enable_beacon)) { | 
|  | if (mac->beacon_enabled == 1) { | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, | 
|  | "ADHOC DISABLE BEACON\n"); | 
|  |  | 
|  | mac->beacon_enabled = 0; | 
|  | rtlpriv->cfg->ops->update_interrupt_mask(hw, 0, | 
|  | rtlpriv->cfg->maps | 
|  | [RTL_IBSS_INT_MASKS]); | 
|  | } | 
|  | } | 
|  | if (changed & BSS_CHANGED_BEACON_INT) { | 
|  | RT_TRACE(rtlpriv, COMP_BEACON, DBG_TRACE, | 
|  | "BSS_CHANGED_BEACON_INT\n"); | 
|  | mac->beacon_interval = bss_conf->beacon_int; | 
|  | rtlpriv->cfg->ops->set_bcn_intv(hw); | 
|  | } | 
|  | } | 
|  |  | 
|  | /*TODO: reference to enum ieee80211_bss_change */ | 
|  | if (changed & BSS_CHANGED_ASSOC) { | 
|  | u8 mstatus; | 
|  | if (bss_conf->assoc) { | 
|  | struct ieee80211_sta *sta = NULL; | 
|  | u8 keep_alive = 10; | 
|  |  | 
|  | mstatus = RT_MEDIA_CONNECT; | 
|  | /* we should reset all sec info & cam | 
|  | * before set cam after linked, we should not | 
|  | * reset in disassoc, that will cause tkip->wep | 
|  | * fail because some flag will be wrong */ | 
|  | /* reset sec info */ | 
|  | rtl_cam_reset_sec_info(hw); | 
|  | /* reset cam to fix wep fail issue | 
|  | * when change from wpa to wep */ | 
|  | rtl_cam_reset_all_entry(hw); | 
|  |  | 
|  | mac->link_state = MAC80211_LINKED; | 
|  | mac->cnt_after_linked = 0; | 
|  | mac->assoc_id = bss_conf->aid; | 
|  | memcpy(mac->bssid, bss_conf->bssid, ETH_ALEN); | 
|  |  | 
|  | if (rtlpriv->cfg->ops->linked_set_reg) | 
|  | rtlpriv->cfg->ops->linked_set_reg(hw); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | sta = ieee80211_find_sta(vif, (u8 *)bss_conf->bssid); | 
|  | if (!sta) { | 
|  | rcu_read_unlock(); | 
|  | goto out; | 
|  | } | 
|  | RT_TRACE(rtlpriv, COMP_EASY_CONCURRENT, DBG_LOUD, | 
|  | "send PS STATIC frame\n"); | 
|  | if (rtlpriv->dm.supp_phymode_switch) { | 
|  | if (sta->ht_cap.ht_supported) | 
|  | rtl_send_smps_action(hw, sta, | 
|  | IEEE80211_SMPS_STATIC); | 
|  | } | 
|  |  | 
|  | if (rtlhal->current_bandtype == BAND_ON_5G) { | 
|  | mac->mode = WIRELESS_MODE_A; | 
|  | } else { | 
|  | if (sta->supp_rates[0] <= 0xf) | 
|  | mac->mode = WIRELESS_MODE_B; | 
|  | else | 
|  | mac->mode = WIRELESS_MODE_G; | 
|  | } | 
|  |  | 
|  | if (sta->ht_cap.ht_supported) { | 
|  | if (rtlhal->current_bandtype == BAND_ON_2_4G) | 
|  | mac->mode = WIRELESS_MODE_N_24G; | 
|  | else | 
|  | mac->mode = WIRELESS_MODE_N_5G; | 
|  | } | 
|  |  | 
|  | if (sta->vht_cap.vht_supported) { | 
|  | if (rtlhal->current_bandtype == BAND_ON_5G) | 
|  | mac->mode = WIRELESS_MODE_AC_5G; | 
|  | else | 
|  | mac->mode = WIRELESS_MODE_AC_24G; | 
|  | } | 
|  |  | 
|  | if (vif->type == NL80211_IFTYPE_STATION && sta) | 
|  | rtlpriv->cfg->ops->update_rate_tbl(hw, sta, 0); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | /* to avoid AP Disassociation caused by inactivity */ | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, | 
|  | HW_VAR_KEEP_ALIVE, | 
|  | (u8 *)(&keep_alive)); | 
|  |  | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, | 
|  | "BSS_CHANGED_ASSOC\n"); | 
|  | } else { | 
|  | mstatus = RT_MEDIA_DISCONNECT; | 
|  |  | 
|  | if (mac->link_state == MAC80211_LINKED) { | 
|  | rtlpriv->enter_ps = false; | 
|  | schedule_work(&rtlpriv->works.lps_change_work); | 
|  | } | 
|  | if (ppsc->p2p_ps_info.p2p_ps_mode > P2P_PS_NONE) | 
|  | rtl_p2p_ps_cmd(hw, P2P_PS_DISABLE); | 
|  | mac->link_state = MAC80211_NOLINK; | 
|  | eth_zero_addr(mac->bssid); | 
|  | mac->vendor = PEER_UNKNOWN; | 
|  | mac->mode = 0; | 
|  |  | 
|  | if (rtlpriv->dm.supp_phymode_switch) { | 
|  | if (rtlpriv->cfg->ops->chk_switch_dmdp) | 
|  | rtlpriv->cfg->ops->chk_switch_dmdp(hw); | 
|  | } | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, | 
|  | "BSS_CHANGED_UN_ASSOC\n"); | 
|  | } | 
|  | rtlpriv->cfg->ops->set_network_type(hw, vif->type); | 
|  | /* For FW LPS: | 
|  | * To tell firmware we have connected or disconnected | 
|  | */ | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, | 
|  | HW_VAR_H2C_FW_JOINBSSRPT, | 
|  | (u8 *)(&mstatus)); | 
|  | ppsc->report_linked = (mstatus == RT_MEDIA_CONNECT) ? | 
|  | true : false; | 
|  |  | 
|  | if (rtlpriv->cfg->ops->get_btc_status()) | 
|  | rtlpriv->btcoexist.btc_ops->btc_mediastatus_notify( | 
|  | rtlpriv, mstatus); | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_ERP_CTS_PROT) { | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, | 
|  | "BSS_CHANGED_ERP_CTS_PROT\n"); | 
|  | mac->use_cts_protect = bss_conf->use_cts_prot; | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_ERP_PREAMBLE) { | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, | 
|  | "BSS_CHANGED_ERP_PREAMBLE use short preamble:%x\n", | 
|  | bss_conf->use_short_preamble); | 
|  |  | 
|  | mac->short_preamble = bss_conf->use_short_preamble; | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACK_PREAMBLE, | 
|  | (u8 *)(&mac->short_preamble)); | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_ERP_SLOT) { | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, | 
|  | "BSS_CHANGED_ERP_SLOT\n"); | 
|  |  | 
|  | if (bss_conf->use_short_slot) | 
|  | mac->slot_time = RTL_SLOT_TIME_9; | 
|  | else | 
|  | mac->slot_time = RTL_SLOT_TIME_20; | 
|  |  | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME, | 
|  | (u8 *)(&mac->slot_time)); | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_HT) { | 
|  | struct ieee80211_sta *sta = NULL; | 
|  |  | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, | 
|  | "BSS_CHANGED_HT\n"); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | sta = ieee80211_find_sta(vif, (u8 *)bss_conf->bssid); | 
|  | if (sta) { | 
|  | if (sta->ht_cap.ampdu_density > | 
|  | mac->current_ampdu_density) | 
|  | mac->current_ampdu_density = | 
|  | sta->ht_cap.ampdu_density; | 
|  | if (sta->ht_cap.ampdu_factor < | 
|  | mac->current_ampdu_factor) | 
|  | mac->current_ampdu_factor = | 
|  | sta->ht_cap.ampdu_factor; | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SHORTGI_DENSITY, | 
|  | (u8 *)(&mac->max_mss_density)); | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AMPDU_FACTOR, | 
|  | &mac->current_ampdu_factor); | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AMPDU_MIN_SPACE, | 
|  | &mac->current_ampdu_density); | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_BSSID) { | 
|  | u32 basic_rates; | 
|  | struct ieee80211_sta *sta = NULL; | 
|  |  | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BSSID, | 
|  | (u8 *)bss_conf->bssid); | 
|  |  | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, | 
|  | "bssid: %pM\n", bss_conf->bssid); | 
|  |  | 
|  | mac->vendor = PEER_UNKNOWN; | 
|  | memcpy(mac->bssid, bss_conf->bssid, ETH_ALEN); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | sta = ieee80211_find_sta(vif, (u8 *)bss_conf->bssid); | 
|  | if (!sta) { | 
|  | rcu_read_unlock(); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (rtlhal->current_bandtype == BAND_ON_5G) { | 
|  | mac->mode = WIRELESS_MODE_A; | 
|  | } else { | 
|  | if (sta->supp_rates[0] <= 0xf) | 
|  | mac->mode = WIRELESS_MODE_B; | 
|  | else | 
|  | mac->mode = WIRELESS_MODE_G; | 
|  | } | 
|  |  | 
|  | if (sta->ht_cap.ht_supported) { | 
|  | if (rtlhal->current_bandtype == BAND_ON_2_4G) | 
|  | mac->mode = WIRELESS_MODE_N_24G; | 
|  | else | 
|  | mac->mode = WIRELESS_MODE_N_5G; | 
|  | } | 
|  |  | 
|  | if (sta->vht_cap.vht_supported) { | 
|  | if (rtlhal->current_bandtype == BAND_ON_5G) | 
|  | mac->mode = WIRELESS_MODE_AC_5G; | 
|  | else | 
|  | mac->mode = WIRELESS_MODE_AC_24G; | 
|  | } | 
|  |  | 
|  | /* just station need it, because ibss & ap mode will | 
|  | * set in sta_add, and will be NULL here */ | 
|  | if (vif->type == NL80211_IFTYPE_STATION) { | 
|  | struct rtl_sta_info *sta_entry; | 
|  | sta_entry = (struct rtl_sta_info *)sta->drv_priv; | 
|  | sta_entry->wireless_mode = mac->mode; | 
|  | } | 
|  |  | 
|  | if (sta->ht_cap.ht_supported) { | 
|  | mac->ht_enable = true; | 
|  |  | 
|  | /* | 
|  | * for cisco 1252 bw20 it's wrong | 
|  | * if (ht_cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { | 
|  | *	mac->bw_40 = true; | 
|  | * } | 
|  | * */ | 
|  | } | 
|  |  | 
|  | if (sta->vht_cap.vht_supported) | 
|  | mac->vht_enable = true; | 
|  |  | 
|  | if (changed & BSS_CHANGED_BASIC_RATES) { | 
|  | /* for 5G must << RATE_6M_INDEX = 4, | 
|  | * because 5G have no cck rate*/ | 
|  | if (rtlhal->current_bandtype == BAND_ON_5G) | 
|  | basic_rates = sta->supp_rates[1] << 4; | 
|  | else | 
|  | basic_rates = sta->supp_rates[0]; | 
|  |  | 
|  | mac->basic_rates = basic_rates; | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE, | 
|  | (u8 *)(&basic_rates)); | 
|  | } | 
|  | rcu_read_unlock(); | 
|  | } | 
|  | out: | 
|  | mutex_unlock(&rtlpriv->locks.conf_mutex); | 
|  | } | 
|  |  | 
|  | static u64 rtl_op_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | u64 tsf; | 
|  |  | 
|  | rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_CORRECT_TSF, (u8 *)(&tsf)); | 
|  | return tsf; | 
|  | } | 
|  |  | 
|  | static void rtl_op_set_tsf(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, u64 tsf) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); | 
|  | u8 bibss = (mac->opmode == NL80211_IFTYPE_ADHOC) ? 1 : 0; | 
|  |  | 
|  | mac->tsf = tsf; | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_CORRECT_TSF, (u8 *)(&bibss)); | 
|  | } | 
|  |  | 
|  | static void rtl_op_reset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | u8 tmp = 0; | 
|  |  | 
|  | rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_DUAL_TSF_RST, (u8 *)(&tmp)); | 
|  | } | 
|  |  | 
|  | static void rtl_op_sta_notify(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | enum sta_notify_cmd cmd, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | switch (cmd) { | 
|  | case STA_NOTIFY_SLEEP: | 
|  | break; | 
|  | case STA_NOTIFY_AWAKE: | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int rtl_op_ampdu_action(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | enum ieee80211_ampdu_mlme_action action, | 
|  | struct ieee80211_sta *sta, u16 tid, u16 *ssn, | 
|  | u8 buf_size) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  |  | 
|  | switch (action) { | 
|  | case IEEE80211_AMPDU_TX_START: | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, | 
|  | "IEEE80211_AMPDU_TX_START: TID:%d\n", tid); | 
|  | return rtl_tx_agg_start(hw, vif, sta, tid, ssn); | 
|  | case IEEE80211_AMPDU_TX_STOP_CONT: | 
|  | case IEEE80211_AMPDU_TX_STOP_FLUSH: | 
|  | case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, | 
|  | "IEEE80211_AMPDU_TX_STOP: TID:%d\n", tid); | 
|  | return rtl_tx_agg_stop(hw, vif, sta, tid); | 
|  | case IEEE80211_AMPDU_TX_OPERATIONAL: | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, | 
|  | "IEEE80211_AMPDU_TX_OPERATIONAL:TID:%d\n", tid); | 
|  | rtl_tx_agg_oper(hw, sta, tid); | 
|  | break; | 
|  | case IEEE80211_AMPDU_RX_START: | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, | 
|  | "IEEE80211_AMPDU_RX_START:TID:%d\n", tid); | 
|  | return rtl_rx_agg_start(hw, sta, tid); | 
|  | case IEEE80211_AMPDU_RX_STOP: | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, | 
|  | "IEEE80211_AMPDU_RX_STOP:TID:%d\n", tid); | 
|  | return rtl_rx_agg_stop(hw, sta, tid); | 
|  | default: | 
|  | RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, | 
|  | "IEEE80211_AMPDU_ERR!!!!:\n"); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void rtl_op_sw_scan_start(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | const u8 *mac_addr) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); | 
|  |  | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "\n"); | 
|  | mac->act_scanning = true; | 
|  | if (rtlpriv->link_info.higher_busytraffic) { | 
|  | mac->skip_scan = true; | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (rtlpriv->cfg->ops->get_btc_status()) | 
|  | rtlpriv->btcoexist.btc_ops->btc_scan_notify(rtlpriv, 1); | 
|  |  | 
|  | if (rtlpriv->dm.supp_phymode_switch) { | 
|  | if (rtlpriv->cfg->ops->chk_switch_dmdp) | 
|  | rtlpriv->cfg->ops->chk_switch_dmdp(hw); | 
|  | } | 
|  |  | 
|  | if (mac->link_state == MAC80211_LINKED) { | 
|  | rtlpriv->enter_ps = false; | 
|  | schedule_work(&rtlpriv->works.lps_change_work); | 
|  | mac->link_state = MAC80211_LINKED_SCANNING; | 
|  | } else { | 
|  | rtl_ips_nic_on(hw); | 
|  | } | 
|  |  | 
|  | /* Dul mac */ | 
|  | rtlpriv->rtlhal.load_imrandiqk_setting_for2g = false; | 
|  |  | 
|  | rtlpriv->cfg->ops->led_control(hw, LED_CTL_SITE_SURVEY); | 
|  | rtlpriv->cfg->ops->scan_operation_backup(hw, SCAN_OPT_BACKUP_BAND0); | 
|  | } | 
|  |  | 
|  | static void rtl_op_sw_scan_complete(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); | 
|  |  | 
|  | RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "\n"); | 
|  | mac->act_scanning = false; | 
|  | mac->skip_scan = false; | 
|  | if (rtlpriv->link_info.higher_busytraffic) | 
|  | return; | 
|  |  | 
|  | /* p2p will use 1/6/11 to scan */ | 
|  | if (mac->n_channels == 3) | 
|  | mac->p2p_in_use = true; | 
|  | else | 
|  | mac->p2p_in_use = false; | 
|  | mac->n_channels = 0; | 
|  | /* Dul mac */ | 
|  | rtlpriv->rtlhal.load_imrandiqk_setting_for2g = false; | 
|  |  | 
|  | if (mac->link_state == MAC80211_LINKED_SCANNING) { | 
|  | mac->link_state = MAC80211_LINKED; | 
|  | if (mac->opmode == NL80211_IFTYPE_STATION) { | 
|  | /* fix fwlps issue */ | 
|  | rtlpriv->cfg->ops->set_network_type(hw, mac->opmode); | 
|  | } | 
|  | } | 
|  |  | 
|  | rtlpriv->cfg->ops->scan_operation_backup(hw, SCAN_OPT_RESTORE); | 
|  | if (rtlpriv->cfg->ops->get_btc_status()) | 
|  | rtlpriv->btcoexist.btc_ops->btc_scan_notify(rtlpriv, 0); | 
|  | } | 
|  |  | 
|  | static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, | 
|  | struct ieee80211_vif *vif, struct ieee80211_sta *sta, | 
|  | struct ieee80211_key_conf *key) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | u8 key_type = NO_ENCRYPTION; | 
|  | u8 key_idx; | 
|  | bool group_key = false; | 
|  | bool wep_only = false; | 
|  | int err = 0; | 
|  | u8 mac_addr[ETH_ALEN]; | 
|  | u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; | 
|  |  | 
|  | if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) { | 
|  | RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, | 
|  | "not open hw encryption\n"); | 
|  | return -ENOSPC;	/*User disabled HW-crypto */ | 
|  | } | 
|  | /* To support IBSS, use sw-crypto for GTK */ | 
|  | if (((vif->type == NL80211_IFTYPE_ADHOC) || | 
|  | (vif->type == NL80211_IFTYPE_MESH_POINT)) && | 
|  | !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) | 
|  | return -ENOSPC; | 
|  | RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, | 
|  | "%s hardware based encryption for keyidx: %d, mac: %pM\n", | 
|  | cmd == SET_KEY ? "Using" : "Disabling", key->keyidx, | 
|  | sta ? sta->addr : bcast_addr); | 
|  | rtlpriv->sec.being_setkey = true; | 
|  | rtl_ips_nic_on(hw); | 
|  | mutex_lock(&rtlpriv->locks.conf_mutex); | 
|  | /* <1> get encryption alg */ | 
|  |  | 
|  | switch (key->cipher) { | 
|  | case WLAN_CIPHER_SUITE_WEP40: | 
|  | key_type = WEP40_ENCRYPTION; | 
|  | RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "alg:WEP40\n"); | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_WEP104: | 
|  | RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "alg:WEP104\n"); | 
|  | key_type = WEP104_ENCRYPTION; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_TKIP: | 
|  | key_type = TKIP_ENCRYPTION; | 
|  | RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "alg:TKIP\n"); | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | key_type = AESCCMP_ENCRYPTION; | 
|  | RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "alg:CCMP\n"); | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_AES_CMAC: | 
|  | /* HW don't support CMAC encryption, | 
|  | * use software CMAC encryption | 
|  | */ | 
|  | key_type = AESCMAC_ENCRYPTION; | 
|  | RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "alg:CMAC\n"); | 
|  | RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, | 
|  | "HW don't support CMAC encrypiton, use software CMAC encrypiton\n"); | 
|  | err = -EOPNOTSUPP; | 
|  | goto out_unlock; | 
|  | default: | 
|  | RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, | 
|  | "alg_err:%x!!!!:\n", key->cipher); | 
|  | goto out_unlock; | 
|  | } | 
|  | if (key_type == WEP40_ENCRYPTION || | 
|  | key_type == WEP104_ENCRYPTION || | 
|  | vif->type == NL80211_IFTYPE_ADHOC) | 
|  | rtlpriv->sec.use_defaultkey = true; | 
|  |  | 
|  | /* <2> get key_idx */ | 
|  | key_idx = (u8) (key->keyidx); | 
|  | if (key_idx > 3) | 
|  | goto out_unlock; | 
|  | /* <3> if pairwise key enable_hw_sec */ | 
|  | group_key = !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE); | 
|  |  | 
|  | /* wep always be group key, but there are two conditions: | 
|  | * 1) wep only: is just for wep enc, in this condition | 
|  | * rtlpriv->sec.pairwise_enc_algorithm == NO_ENCRYPTION | 
|  | * will be true & enable_hw_sec will be set when wep | 
|  | * ke setting. | 
|  | * 2) wep(group) + AES(pairwise): some AP like cisco | 
|  | * may use it, in this condition enable_hw_sec will not | 
|  | * be set when wep key setting */ | 
|  | /* we must reset sec_info after lingked before set key, | 
|  | * or some flag will be wrong*/ | 
|  | if (vif->type == NL80211_IFTYPE_AP || | 
|  | vif->type == NL80211_IFTYPE_MESH_POINT) { | 
|  | if (!group_key || key_type == WEP40_ENCRYPTION || | 
|  | key_type == WEP104_ENCRYPTION) { | 
|  | if (group_key) | 
|  | wep_only = true; | 
|  | rtlpriv->cfg->ops->enable_hw_sec(hw); | 
|  | } | 
|  | } else { | 
|  | if ((!group_key) || (vif->type == NL80211_IFTYPE_ADHOC) || | 
|  | rtlpriv->sec.pairwise_enc_algorithm == NO_ENCRYPTION) { | 
|  | if (rtlpriv->sec.pairwise_enc_algorithm == | 
|  | NO_ENCRYPTION && | 
|  | (key_type == WEP40_ENCRYPTION || | 
|  | key_type == WEP104_ENCRYPTION)) | 
|  | wep_only = true; | 
|  | rtlpriv->sec.pairwise_enc_algorithm = key_type; | 
|  | RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, | 
|  | "set enable_hw_sec, key_type:%x(OPEN:0 WEP40:1 TKIP:2 AES:4 WEP104:5)\n", | 
|  | key_type); | 
|  | rtlpriv->cfg->ops->enable_hw_sec(hw); | 
|  | } | 
|  | } | 
|  | /* <4> set key based on cmd */ | 
|  | switch (cmd) { | 
|  | case SET_KEY: | 
|  | if (wep_only) { | 
|  | RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, | 
|  | "set WEP(group/pairwise) key\n"); | 
|  | /* Pairwise key with an assigned MAC address. */ | 
|  | rtlpriv->sec.pairwise_enc_algorithm = key_type; | 
|  | rtlpriv->sec.group_enc_algorithm = key_type; | 
|  | /*set local buf about wep key. */ | 
|  | memcpy(rtlpriv->sec.key_buf[key_idx], | 
|  | key->key, key->keylen); | 
|  | rtlpriv->sec.key_len[key_idx] = key->keylen; | 
|  | eth_zero_addr(mac_addr); | 
|  | } else if (group_key) {	/* group key */ | 
|  | RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, | 
|  | "set group key\n"); | 
|  | /* group key */ | 
|  | rtlpriv->sec.group_enc_algorithm = key_type; | 
|  | /*set local buf about group key. */ | 
|  | memcpy(rtlpriv->sec.key_buf[key_idx], | 
|  | key->key, key->keylen); | 
|  | rtlpriv->sec.key_len[key_idx] = key->keylen; | 
|  | memcpy(mac_addr, bcast_addr, ETH_ALEN); | 
|  | } else {	/* pairwise key */ | 
|  | RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, | 
|  | "set pairwise key\n"); | 
|  | if (!sta) { | 
|  | RT_ASSERT(false, | 
|  | "pairwise key without mac_addr\n"); | 
|  |  | 
|  | err = -EOPNOTSUPP; | 
|  | goto out_unlock; | 
|  | } | 
|  | /* Pairwise key with an assigned MAC address. */ | 
|  | rtlpriv->sec.pairwise_enc_algorithm = key_type; | 
|  | /*set local buf about pairwise key. */ | 
|  | memcpy(rtlpriv->sec.key_buf[PAIRWISE_KEYIDX], | 
|  | key->key, key->keylen); | 
|  | rtlpriv->sec.key_len[PAIRWISE_KEYIDX] = key->keylen; | 
|  | rtlpriv->sec.pairwise_key = | 
|  | rtlpriv->sec.key_buf[PAIRWISE_KEYIDX]; | 
|  | memcpy(mac_addr, sta->addr, ETH_ALEN); | 
|  | } | 
|  | rtlpriv->cfg->ops->set_key(hw, key_idx, mac_addr, | 
|  | group_key, key_type, wep_only, | 
|  | false); | 
|  | /* <5> tell mac80211 do something: */ | 
|  | /*must use sw generate IV, or can not work !!!!. */ | 
|  | key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; | 
|  | key->hw_key_idx = key_idx; | 
|  | if (key_type == TKIP_ENCRYPTION) | 
|  | key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; | 
|  | /*use software CCMP encryption for management frames (MFP) */ | 
|  | if (key_type == AESCCMP_ENCRYPTION) | 
|  | key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX; | 
|  | break; | 
|  | case DISABLE_KEY: | 
|  | RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, | 
|  | "disable key delete one entry\n"); | 
|  | /*set local buf about wep key. */ | 
|  | if (vif->type == NL80211_IFTYPE_AP || | 
|  | vif->type == NL80211_IFTYPE_MESH_POINT) { | 
|  | if (sta) | 
|  | rtl_cam_del_entry(hw, sta->addr); | 
|  | } | 
|  | memset(rtlpriv->sec.key_buf[key_idx], 0, key->keylen); | 
|  | rtlpriv->sec.key_len[key_idx] = 0; | 
|  | eth_zero_addr(mac_addr); | 
|  | /* | 
|  | *mac80211 will delete entrys one by one, | 
|  | *so don't use rtl_cam_reset_all_entry | 
|  | *or clear all entry here. | 
|  | */ | 
|  | rtl_cam_delete_one_entry(hw, mac_addr, key_idx); | 
|  | break; | 
|  | default: | 
|  | RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, | 
|  | "cmd_err:%x!!!!:\n", cmd); | 
|  | } | 
|  | out_unlock: | 
|  | mutex_unlock(&rtlpriv->locks.conf_mutex); | 
|  | rtlpriv->sec.being_setkey = false; | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void rtl_op_rfkill_poll(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  |  | 
|  | bool radio_state; | 
|  | bool blocked; | 
|  | u8 valid = 0; | 
|  |  | 
|  | if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&rtlpriv->locks.conf_mutex); | 
|  |  | 
|  | /*if Radio On return true here */ | 
|  | radio_state = rtlpriv->cfg->ops->radio_onoff_checking(hw, &valid); | 
|  |  | 
|  | if (valid) { | 
|  | if (unlikely(radio_state != rtlpriv->rfkill.rfkill_state)) { | 
|  | rtlpriv->rfkill.rfkill_state = radio_state; | 
|  |  | 
|  | RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, | 
|  | "wireless radio switch turned %s\n", | 
|  | radio_state ? "on" : "off"); | 
|  |  | 
|  | blocked = (rtlpriv->rfkill.rfkill_state == 1) ? 0 : 1; | 
|  | wiphy_rfkill_set_hw_state(hw->wiphy, blocked); | 
|  | } | 
|  | } | 
|  |  | 
|  | mutex_unlock(&rtlpriv->locks.conf_mutex); | 
|  | } | 
|  |  | 
|  | /* this function is called by mac80211 to flush tx buffer | 
|  | * before switch channle or power save, or tx buffer packet | 
|  | * maybe send after offchannel or rf sleep, this may cause | 
|  | * dis-association by AP */ | 
|  | static void rtl_op_flush(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | u32 queues, | 
|  | bool drop) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  |  | 
|  | if (rtlpriv->intf_ops->flush) | 
|  | rtlpriv->intf_ops->flush(hw, queues, drop); | 
|  | } | 
|  |  | 
|  | /*	Description: | 
|  | *		This routine deals with the Power Configuration CMD | 
|  | *		 parsing for RTL8723/RTL8188E Series IC. | 
|  | *	Assumption: | 
|  | *		We should follow specific format that was released from HW SD. | 
|  | */ | 
|  | bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version, | 
|  | u8 faversion, u8 interface_type, | 
|  | struct wlan_pwr_cfg pwrcfgcmd[]) | 
|  | { | 
|  | struct wlan_pwr_cfg cfg_cmd = {0}; | 
|  | bool polling_bit = false; | 
|  | u32 ary_idx = 0; | 
|  | u8 value = 0; | 
|  | u32 offset = 0; | 
|  | u32 polling_count = 0; | 
|  | u32 max_polling_cnt = 5000; | 
|  |  | 
|  | do { | 
|  | cfg_cmd = pwrcfgcmd[ary_idx]; | 
|  | RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, | 
|  | "rtl_hal_pwrseqcmdparsing(): offset(%#x),cut_msk(%#x), famsk(%#x), interface_msk(%#x), base(%#x), cmd(%#x), msk(%#x), value(%#x)\n", | 
|  | GET_PWR_CFG_OFFSET(cfg_cmd), | 
|  | GET_PWR_CFG_CUT_MASK(cfg_cmd), | 
|  | GET_PWR_CFG_FAB_MASK(cfg_cmd), | 
|  | GET_PWR_CFG_INTF_MASK(cfg_cmd), | 
|  | GET_PWR_CFG_BASE(cfg_cmd), GET_PWR_CFG_CMD(cfg_cmd), | 
|  | GET_PWR_CFG_MASK(cfg_cmd), GET_PWR_CFG_VALUE(cfg_cmd)); | 
|  |  | 
|  | if ((GET_PWR_CFG_FAB_MASK(cfg_cmd)&faversion) && | 
|  | (GET_PWR_CFG_CUT_MASK(cfg_cmd)&cut_version) && | 
|  | (GET_PWR_CFG_INTF_MASK(cfg_cmd)&interface_type)) { | 
|  | switch (GET_PWR_CFG_CMD(cfg_cmd)) { | 
|  | case PWR_CMD_READ: | 
|  | RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, | 
|  | "rtl_hal_pwrseqcmdparsing(): PWR_CMD_READ\n"); | 
|  | break; | 
|  | case PWR_CMD_WRITE: | 
|  | RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, | 
|  | "rtl_hal_pwrseqcmdparsing(): PWR_CMD_WRITE\n"); | 
|  | offset = GET_PWR_CFG_OFFSET(cfg_cmd); | 
|  |  | 
|  | /*Read the value from system register*/ | 
|  | value = rtl_read_byte(rtlpriv, offset); | 
|  | value &= (~(GET_PWR_CFG_MASK(cfg_cmd))); | 
|  | value |= (GET_PWR_CFG_VALUE(cfg_cmd) & | 
|  | GET_PWR_CFG_MASK(cfg_cmd)); | 
|  |  | 
|  | /*Write the value back to sytem register*/ | 
|  | rtl_write_byte(rtlpriv, offset, value); | 
|  | break; | 
|  | case PWR_CMD_POLLING: | 
|  | RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, | 
|  | "rtl_hal_pwrseqcmdparsing(): PWR_CMD_POLLING\n"); | 
|  | polling_bit = false; | 
|  | offset = GET_PWR_CFG_OFFSET(cfg_cmd); | 
|  |  | 
|  | do { | 
|  | value = rtl_read_byte(rtlpriv, offset); | 
|  |  | 
|  | value &= GET_PWR_CFG_MASK(cfg_cmd); | 
|  | if (value == | 
|  | (GET_PWR_CFG_VALUE(cfg_cmd) & | 
|  | GET_PWR_CFG_MASK(cfg_cmd))) | 
|  | polling_bit = true; | 
|  | else | 
|  | udelay(10); | 
|  |  | 
|  | if (polling_count++ > max_polling_cnt) | 
|  | return false; | 
|  | } while (!polling_bit); | 
|  | break; | 
|  | case PWR_CMD_DELAY: | 
|  | RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, | 
|  | "rtl_hal_pwrseqcmdparsing(): PWR_CMD_DELAY\n"); | 
|  | if (GET_PWR_CFG_VALUE(cfg_cmd) == | 
|  | PWRSEQ_DELAY_US) | 
|  | udelay(GET_PWR_CFG_OFFSET(cfg_cmd)); | 
|  | else | 
|  | mdelay(GET_PWR_CFG_OFFSET(cfg_cmd)); | 
|  | break; | 
|  | case PWR_CMD_END: | 
|  | RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, | 
|  | "rtl_hal_pwrseqcmdparsing(): PWR_CMD_END\n"); | 
|  | return true; | 
|  | default: | 
|  | RT_ASSERT(false, | 
|  | "rtl_hal_pwrseqcmdparsing(): Unknown CMD!!\n"); | 
|  | break; | 
|  | } | 
|  | } | 
|  | ary_idx++; | 
|  | } while (1); | 
|  |  | 
|  | return true; | 
|  | } | 
|  | EXPORT_SYMBOL(rtl_hal_pwrseqcmdparsing); | 
|  |  | 
|  | bool rtl_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); | 
|  | struct rtl8192_tx_ring *ring; | 
|  | struct rtl_tx_desc *pdesc; | 
|  | unsigned long flags; | 
|  | struct sk_buff *pskb = NULL; | 
|  |  | 
|  | ring = &rtlpci->tx_ring[BEACON_QUEUE]; | 
|  |  | 
|  | spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags); | 
|  | pskb = __skb_dequeue(&ring->queue); | 
|  | if (pskb) | 
|  | kfree_skb(pskb); | 
|  |  | 
|  | /*this is wrong, fill_tx_cmddesc needs update*/ | 
|  | pdesc = &ring->desc[0]; | 
|  |  | 
|  | rtlpriv->cfg->ops->fill_tx_cmddesc(hw, (u8 *)pdesc, 1, 1, skb); | 
|  |  | 
|  | __skb_queue_tail(&ring->queue, skb); | 
|  |  | 
|  | spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags); | 
|  |  | 
|  | rtlpriv->cfg->ops->tx_polling(hw, BEACON_QUEUE); | 
|  |  | 
|  | return true; | 
|  | } | 
|  | EXPORT_SYMBOL(rtl_cmd_send_packet); | 
|  | const struct ieee80211_ops rtl_ops = { | 
|  | .start = rtl_op_start, | 
|  | .stop = rtl_op_stop, | 
|  | .tx = rtl_op_tx, | 
|  | .add_interface = rtl_op_add_interface, | 
|  | .remove_interface = rtl_op_remove_interface, | 
|  | .change_interface = rtl_op_change_interface, | 
|  | #ifdef CONFIG_PM | 
|  | .suspend = rtl_op_suspend, | 
|  | .resume = rtl_op_resume, | 
|  | #endif | 
|  | .config = rtl_op_config, | 
|  | .configure_filter = rtl_op_configure_filter, | 
|  | .set_key = rtl_op_set_key, | 
|  | .conf_tx = rtl_op_conf_tx, | 
|  | .bss_info_changed = rtl_op_bss_info_changed, | 
|  | .get_tsf = rtl_op_get_tsf, | 
|  | .set_tsf = rtl_op_set_tsf, | 
|  | .reset_tsf = rtl_op_reset_tsf, | 
|  | .sta_notify = rtl_op_sta_notify, | 
|  | .ampdu_action = rtl_op_ampdu_action, | 
|  | .sw_scan_start = rtl_op_sw_scan_start, | 
|  | .sw_scan_complete = rtl_op_sw_scan_complete, | 
|  | .rfkill_poll = rtl_op_rfkill_poll, | 
|  | .sta_add = rtl_op_sta_add, | 
|  | .sta_remove = rtl_op_sta_remove, | 
|  | .flush = rtl_op_flush, | 
|  | }; | 
|  | EXPORT_SYMBOL_GPL(rtl_ops); | 
|  |  | 
|  | bool rtl_btc_status_false(void) | 
|  | { | 
|  | return false; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rtl_btc_status_false); | 
|  |  | 
|  | void rtl_dm_diginit(struct ieee80211_hw *hw, u32 cur_igvalue) | 
|  | { | 
|  | struct rtl_priv *rtlpriv = rtl_priv(hw); | 
|  | struct dig_t *dm_digtable = &rtlpriv->dm_digtable; | 
|  |  | 
|  | dm_digtable->dig_enable_flag = true; | 
|  | dm_digtable->dig_ext_port_stage = DIG_EXT_PORT_STAGE_MAX; | 
|  | dm_digtable->cur_igvalue = cur_igvalue; | 
|  | dm_digtable->pre_igvalue = 0; | 
|  | dm_digtable->cur_sta_cstate = DIG_STA_DISCONNECT; | 
|  | dm_digtable->presta_cstate = DIG_STA_DISCONNECT; | 
|  | dm_digtable->curmultista_cstate = DIG_MULTISTA_DISCONNECT; | 
|  | dm_digtable->rssi_lowthresh = DM_DIG_THRESH_LOW; | 
|  | dm_digtable->rssi_highthresh = DM_DIG_THRESH_HIGH; | 
|  | dm_digtable->fa_lowthresh = DM_FALSEALARM_THRESH_LOW; | 
|  | dm_digtable->fa_highthresh = DM_FALSEALARM_THRESH_HIGH; | 
|  | dm_digtable->rx_gain_max = DM_DIG_MAX; | 
|  | dm_digtable->rx_gain_min = DM_DIG_MIN; | 
|  | dm_digtable->back_val = DM_DIG_BACKOFF_DEFAULT; | 
|  | dm_digtable->back_range_max = DM_DIG_BACKOFF_MAX; | 
|  | dm_digtable->back_range_min = DM_DIG_BACKOFF_MIN; | 
|  | dm_digtable->pre_cck_cca_thres = 0xff; | 
|  | dm_digtable->cur_cck_cca_thres = 0x83; | 
|  | dm_digtable->forbidden_igi = DM_DIG_MIN; | 
|  | dm_digtable->large_fa_hit = 0; | 
|  | dm_digtable->recover_cnt = 0; | 
|  | dm_digtable->dig_min_0 = 0x25; | 
|  | dm_digtable->dig_min_1 = 0x25; | 
|  | dm_digtable->media_connect_0 = false; | 
|  | dm_digtable->media_connect_1 = false; | 
|  | rtlpriv->dm.dm_initialgain_enable = true; | 
|  | dm_digtable->bt30_cur_igi = 0x32; | 
|  | dm_digtable->pre_cck_pd_state = CCK_PD_STAGE_MAX; | 
|  | dm_digtable->cur_cck_pd_state = CCK_PD_STAGE_LOWRSSI; | 
|  | } | 
|  | EXPORT_SYMBOL(rtl_dm_diginit); |