| SKY81452-backlight bindings |
| |
| Required properties: |
| - compatible : Must be "skyworks,sky81452-backlight" |
| |
| Optional properties: |
| - name : Name of backlight device. Default is 'lcd-backlight'. |
| - gpios : GPIO to use to EN pin. |
| See Documentation/devicetree/bindings/gpio/gpio.txt |
| - led-sources : List of enabled channels from 0 to 5. |
| See Documentation/devicetree/bindings/leds/common.txt |
| - skyworks,ignore-pwm : Ignore both PWM input |
| - skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming. |
| - skyworks,phase-shift : Enable phase shift mode |
| - skyworks,short-detection-threshold-volt |
| : It should be one of 4, 5, 6 and 7V. |
| - skyworks,current-limit-mA |
| : It should be 2300mA or 2750mA. |
| |
| Example: |
| |
| backlight { |
| compatible = "skyworks,sky81452-backlight"; |
| name = "pwm-backlight"; |
| led-sources = <0 1 2 5>; |
| skyworks,ignore-pwm; |
| skyworks,phase-shift; |
| skyworks,current-limit-mA = <2300>; |
| }; |
