| Texas Instruments OMAP3 Display Subsystem |
| ========================================= |
| |
| See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic |
| description about OMAP Display Subsystem bindings. |
| |
| DSS Core |
| -------- |
| |
| Required properties: |
| - compatible: "ti,omap3-dss" |
| - reg: address and length of the register space |
| - ti,hwmods: "dss_core" |
| - clocks: handle to fclk |
| - clock-names: "fck" |
| |
| Optional nodes: |
| - Video ports: |
| - Port 0: DPI output |
| - Port 1: SDI output |
| |
| DPI Endpoint required properties: |
| - data-lines: number of lines used |
| |
| SDI Endpoint required properties: |
| - datapairs: number of datapairs used |
| |
| |
| DISPC |
| ----- |
| |
| Required properties: |
| - compatible: "ti,omap3-dispc" |
| - reg: address and length of the register space |
| - ti,hwmods: "dss_dispc" |
| - interrupts: the DISPC interrupt |
| - clocks: handle to fclk |
| - clock-names: "fck" |
| |
| |
| RFBI |
| ---- |
| |
| Required properties: |
| - compatible: "ti,omap3-rfbi" |
| - reg: address and length of the register space |
| - ti,hwmods: "dss_rfbi" |
| - clocks: handles to fclk and iclk |
| - clock-names: "fck", "ick" |
| |
| |
| VENC |
| ---- |
| |
| Required properties: |
| - compatible: "ti,omap3-venc" |
| - reg: address and length of the register space |
| - ti,hwmods: "dss_venc" |
| - vdda-supply: power supply for DAC |
| - clocks: handle to fclk |
| - clock-names: "fck" |
| |
| VENC Endpoint required properties: |
| - ti,invert-polarity: invert the polarity of the video signal |
| - ti,channels: 1 for composite, 2 for s-video |
| |
| |
| DSI |
| --- |
| |
| Required properties: |
| - compatible: "ti,omap3-dsi" |
| - reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll' |
| - reg-names: "proto", "phy", "pll" |
| - interrupts: the DSI interrupt line |
| - ti,hwmods: "dss_dsi1" |
| - vdd-supply: power supply for DSI |
| - clocks: handles to fclk and pll clock |
| - clock-names: "fck", "sys_clk" |
| |
| DSI Endpoint required properties: |
| - lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-, |
| DATA1+, DATA1-, ... |
