|  | /* | 
|  | * Atheros CARL9170 driver | 
|  | * | 
|  | * 802.11 xmit & status routines | 
|  | * | 
|  | * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> | 
|  | * Copyright 2009, 2010, Christian Lamparter <chunkeey@googlemail.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; see the file COPYING.  If not, see | 
|  | * http://www.gnu.org/licenses/. | 
|  | * | 
|  | * This file incorporates work covered by the following copyright and | 
|  | * permission notice: | 
|  | *    Copyright (c) 2007-2008 Atheros Communications, Inc. | 
|  | * | 
|  | *    Permission to use, copy, modify, and/or distribute this software for any | 
|  | *    purpose with or without fee is hereby granted, provided that the above | 
|  | *    copyright notice and this permission notice appear in all copies. | 
|  | * | 
|  | *    THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | 
|  | *    WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | 
|  | *    MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | 
|  | *    ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | 
|  | *    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | 
|  | *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | 
|  | *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | 
|  | */ | 
|  |  | 
|  | #include <linux/slab.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <net/mac80211.h> | 
|  | #include "carl9170.h" | 
|  | #include "hw.h" | 
|  | #include "cmd.h" | 
|  |  | 
|  | static inline unsigned int __carl9170_get_queue(struct ar9170 *ar, | 
|  | unsigned int queue) | 
|  | { | 
|  | if (unlikely(modparam_noht)) { | 
|  | return queue; | 
|  | } else { | 
|  | /* | 
|  | * This is just another workaround, until | 
|  | * someone figures out how to get QoS and | 
|  | * AMPDU to play nicely together. | 
|  | */ | 
|  |  | 
|  | return 2;		/* AC_BE */ | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline unsigned int carl9170_get_queue(struct ar9170 *ar, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | return __carl9170_get_queue(ar, skb_get_queue_mapping(skb)); | 
|  | } | 
|  |  | 
|  | static bool is_mem_full(struct ar9170 *ar) | 
|  | { | 
|  | return (DIV_ROUND_UP(IEEE80211_MAX_FRAME_LEN, ar->fw.mem_block_size) > | 
|  | atomic_read(&ar->mem_free_blocks)); | 
|  | } | 
|  |  | 
|  | static void carl9170_tx_accounting(struct ar9170 *ar, struct sk_buff *skb) | 
|  | { | 
|  | int queue, i; | 
|  | bool mem_full; | 
|  |  | 
|  | atomic_inc(&ar->tx_total_queued); | 
|  |  | 
|  | queue = skb_get_queue_mapping(skb); | 
|  | spin_lock_bh(&ar->tx_stats_lock); | 
|  |  | 
|  | /* | 
|  | * The driver has to accept the frame, regardless if the queue is | 
|  | * full to the brim, or not. We have to do the queuing internally, | 
|  | * since mac80211 assumes that a driver which can operate with | 
|  | * aggregated frames does not reject frames for this reason. | 
|  | */ | 
|  | ar->tx_stats[queue].len++; | 
|  | ar->tx_stats[queue].count++; | 
|  |  | 
|  | mem_full = is_mem_full(ar); | 
|  | for (i = 0; i < ar->hw->queues; i++) { | 
|  | if (mem_full || ar->tx_stats[i].len >= ar->tx_stats[i].limit) { | 
|  | ieee80211_stop_queue(ar->hw, i); | 
|  | ar->queue_stop_timeout[i] = jiffies; | 
|  | } | 
|  | } | 
|  |  | 
|  | spin_unlock_bh(&ar->tx_stats_lock); | 
|  | } | 
|  |  | 
|  | /* needs rcu_read_lock */ | 
|  | static struct ieee80211_sta *__carl9170_get_tx_sta(struct ar9170 *ar, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct _carl9170_tx_superframe *super = (void *) skb->data; | 
|  | struct ieee80211_hdr *hdr = (void *) super->frame_data; | 
|  | struct ieee80211_vif *vif; | 
|  | unsigned int vif_id; | 
|  |  | 
|  | vif_id = (super->s.misc & CARL9170_TX_SUPER_MISC_VIF_ID) >> | 
|  | CARL9170_TX_SUPER_MISC_VIF_ID_S; | 
|  |  | 
|  | if (WARN_ON_ONCE(vif_id >= AR9170_MAX_VIRTUAL_MAC)) | 
|  | return NULL; | 
|  |  | 
|  | vif = rcu_dereference(ar->vif_priv[vif_id].vif); | 
|  | if (unlikely(!vif)) | 
|  | return NULL; | 
|  |  | 
|  | /* | 
|  | * Normally we should use wrappers like ieee80211_get_DA to get | 
|  | * the correct peer ieee80211_sta. | 
|  | * | 
|  | * But there is a problem with indirect traffic (broadcasts, or | 
|  | * data which is designated for other stations) in station mode. | 
|  | * The frame will be directed to the AP for distribution and not | 
|  | * to the actual destination. | 
|  | */ | 
|  |  | 
|  | return ieee80211_find_sta(vif, hdr->addr1); | 
|  | } | 
|  |  | 
|  | static void carl9170_tx_ps_unblock(struct ar9170 *ar, struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_sta *sta; | 
|  | struct carl9170_sta_info *sta_info; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | sta = __carl9170_get_tx_sta(ar, skb); | 
|  | if (unlikely(!sta)) | 
|  | goto out_rcu; | 
|  |  | 
|  | sta_info = (struct carl9170_sta_info *) sta->drv_priv; | 
|  | if (atomic_dec_return(&sta_info->pending_frames) == 0) | 
|  | ieee80211_sta_block_awake(ar->hw, sta, false); | 
|  |  | 
|  | out_rcu: | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static void carl9170_tx_accounting_free(struct ar9170 *ar, struct sk_buff *skb) | 
|  | { | 
|  | int queue; | 
|  |  | 
|  | queue = skb_get_queue_mapping(skb); | 
|  |  | 
|  | spin_lock_bh(&ar->tx_stats_lock); | 
|  |  | 
|  | ar->tx_stats[queue].len--; | 
|  |  | 
|  | if (!is_mem_full(ar)) { | 
|  | unsigned int i; | 
|  | for (i = 0; i < ar->hw->queues; i++) { | 
|  | if (ar->tx_stats[i].len >= CARL9170_NUM_TX_LIMIT_SOFT) | 
|  | continue; | 
|  |  | 
|  | if (ieee80211_queue_stopped(ar->hw, i)) { | 
|  | unsigned long tmp; | 
|  |  | 
|  | tmp = jiffies - ar->queue_stop_timeout[i]; | 
|  | if (tmp > ar->max_queue_stop_timeout[i]) | 
|  | ar->max_queue_stop_timeout[i] = tmp; | 
|  | } | 
|  |  | 
|  | ieee80211_wake_queue(ar->hw, i); | 
|  | } | 
|  | } | 
|  |  | 
|  | spin_unlock_bh(&ar->tx_stats_lock); | 
|  |  | 
|  | if (atomic_dec_and_test(&ar->tx_total_queued)) | 
|  | complete(&ar->tx_flush); | 
|  | } | 
|  |  | 
|  | static int carl9170_alloc_dev_space(struct ar9170 *ar, struct sk_buff *skb) | 
|  | { | 
|  | struct _carl9170_tx_superframe *super = (void *) skb->data; | 
|  | unsigned int chunks; | 
|  | int cookie = -1; | 
|  |  | 
|  | atomic_inc(&ar->mem_allocs); | 
|  |  | 
|  | chunks = DIV_ROUND_UP(skb->len, ar->fw.mem_block_size); | 
|  | if (unlikely(atomic_sub_return(chunks, &ar->mem_free_blocks) < 0)) { | 
|  | atomic_add(chunks, &ar->mem_free_blocks); | 
|  | return -ENOSPC; | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&ar->mem_lock); | 
|  | cookie = bitmap_find_free_region(ar->mem_bitmap, ar->fw.mem_blocks, 0); | 
|  | spin_unlock_bh(&ar->mem_lock); | 
|  |  | 
|  | if (unlikely(cookie < 0)) { | 
|  | atomic_add(chunks, &ar->mem_free_blocks); | 
|  | return -ENOSPC; | 
|  | } | 
|  |  | 
|  | super = (void *) skb->data; | 
|  |  | 
|  | /* | 
|  | * Cookie #0 serves two special purposes: | 
|  | *  1. The firmware might use it generate BlockACK frames | 
|  | *     in responds of an incoming BlockAckReqs. | 
|  | * | 
|  | *  2. Prevent double-free bugs. | 
|  | */ | 
|  | super->s.cookie = (u8) cookie + 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void carl9170_release_dev_space(struct ar9170 *ar, struct sk_buff *skb) | 
|  | { | 
|  | struct _carl9170_tx_superframe *super = (void *) skb->data; | 
|  | int cookie; | 
|  |  | 
|  | /* make a local copy of the cookie */ | 
|  | cookie = super->s.cookie; | 
|  | /* invalidate cookie */ | 
|  | super->s.cookie = 0; | 
|  |  | 
|  | /* | 
|  | * Do a out-of-bounds check on the cookie: | 
|  | * | 
|  | *  * cookie "0" is reserved and won't be assigned to any | 
|  | *    out-going frame. Internally however, it is used to | 
|  | *    mark no longer/un-accounted frames and serves as a | 
|  | *    cheap way of preventing frames from being freed | 
|  | *    twice by _accident_. NB: There is a tiny race... | 
|  | * | 
|  | *  * obviously, cookie number is limited by the amount | 
|  | *    of available memory blocks, so the number can | 
|  | *    never execeed the mem_blocks count. | 
|  | */ | 
|  | if (unlikely(WARN_ON_ONCE(cookie == 0) || | 
|  | WARN_ON_ONCE(cookie > ar->fw.mem_blocks))) | 
|  | return; | 
|  |  | 
|  | atomic_add(DIV_ROUND_UP(skb->len, ar->fw.mem_block_size), | 
|  | &ar->mem_free_blocks); | 
|  |  | 
|  | spin_lock_bh(&ar->mem_lock); | 
|  | bitmap_release_region(ar->mem_bitmap, cookie - 1, 0); | 
|  | spin_unlock_bh(&ar->mem_lock); | 
|  | } | 
|  |  | 
|  | /* Called from any context */ | 
|  | static void carl9170_tx_release(struct kref *ref) | 
|  | { | 
|  | struct ar9170 *ar; | 
|  | struct carl9170_tx_info *arinfo; | 
|  | struct ieee80211_tx_info *txinfo; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | arinfo = container_of(ref, struct carl9170_tx_info, ref); | 
|  | txinfo = container_of((void *) arinfo, struct ieee80211_tx_info, | 
|  | rate_driver_data); | 
|  | skb = container_of((void *) txinfo, struct sk_buff, cb); | 
|  |  | 
|  | ar = arinfo->ar; | 
|  | if (WARN_ON_ONCE(!ar)) | 
|  | return; | 
|  |  | 
|  | BUILD_BUG_ON( | 
|  | offsetof(struct ieee80211_tx_info, status.ack_signal) != 20); | 
|  |  | 
|  | memset(&txinfo->status.ack_signal, 0, | 
|  | sizeof(struct ieee80211_tx_info) - | 
|  | offsetof(struct ieee80211_tx_info, status.ack_signal)); | 
|  |  | 
|  | if (atomic_read(&ar->tx_total_queued)) | 
|  | ar->tx_schedule = true; | 
|  |  | 
|  | if (txinfo->flags & IEEE80211_TX_CTL_AMPDU) { | 
|  | if (!atomic_read(&ar->tx_ampdu_upload)) | 
|  | ar->tx_ampdu_schedule = true; | 
|  |  | 
|  | if (txinfo->flags & IEEE80211_TX_STAT_AMPDU) { | 
|  | struct _carl9170_tx_superframe *super; | 
|  |  | 
|  | super = (void *)skb->data; | 
|  | txinfo->status.ampdu_len = super->s.rix; | 
|  | txinfo->status.ampdu_ack_len = super->s.cnt; | 
|  | } else if ((txinfo->flags & IEEE80211_TX_STAT_ACK) && | 
|  | !(txinfo->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)) { | 
|  | /* | 
|  | * drop redundant tx_status reports: | 
|  | * | 
|  | * 1. ampdu_ack_len of the final tx_status does | 
|  | *    include the feedback of this particular frame. | 
|  | * | 
|  | * 2. tx_status_irqsafe only queues up to 128 | 
|  | *    tx feedback reports and discards the rest. | 
|  | * | 
|  | * 3. minstrel_ht is picky, it only accepts | 
|  | *    reports of frames with the TX_STATUS_AMPDU flag. | 
|  | * | 
|  | * 4. mac80211 is not particularly interested in | 
|  | *    feedback either [CTL_REQ_TX_STATUS not set] | 
|  | */ | 
|  |  | 
|  | ieee80211_free_txskb(ar->hw, skb); | 
|  | return; | 
|  | } else { | 
|  | /* | 
|  | * Either the frame transmission has failed or | 
|  | * mac80211 requested tx status. | 
|  | */ | 
|  | } | 
|  | } | 
|  |  | 
|  | skb_pull(skb, sizeof(struct _carl9170_tx_superframe)); | 
|  | ieee80211_tx_status_irqsafe(ar->hw, skb); | 
|  | } | 
|  |  | 
|  | void carl9170_tx_get_skb(struct sk_buff *skb) | 
|  | { | 
|  | struct carl9170_tx_info *arinfo = (void *) | 
|  | (IEEE80211_SKB_CB(skb))->rate_driver_data; | 
|  | kref_get(&arinfo->ref); | 
|  | } | 
|  |  | 
|  | int carl9170_tx_put_skb(struct sk_buff *skb) | 
|  | { | 
|  | struct carl9170_tx_info *arinfo = (void *) | 
|  | (IEEE80211_SKB_CB(skb))->rate_driver_data; | 
|  |  | 
|  | return kref_put(&arinfo->ref, carl9170_tx_release); | 
|  | } | 
|  |  | 
|  | /* Caller must hold the tid_info->lock & rcu_read_lock */ | 
|  | static void carl9170_tx_shift_bm(struct ar9170 *ar, | 
|  | struct carl9170_sta_tid *tid_info, u16 seq) | 
|  | { | 
|  | u16 off; | 
|  |  | 
|  | off = SEQ_DIFF(seq, tid_info->bsn); | 
|  |  | 
|  | if (WARN_ON_ONCE(off >= CARL9170_BAW_BITS)) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Sanity check. For each MPDU we set the bit in bitmap and | 
|  | * clear it once we received the tx_status. | 
|  | * But if the bit is already cleared then we've been bitten | 
|  | * by a bug. | 
|  | */ | 
|  | WARN_ON_ONCE(!test_and_clear_bit(off, tid_info->bitmap)); | 
|  |  | 
|  | off = SEQ_DIFF(tid_info->snx, tid_info->bsn); | 
|  | if (WARN_ON_ONCE(off >= CARL9170_BAW_BITS)) | 
|  | return; | 
|  |  | 
|  | if (!bitmap_empty(tid_info->bitmap, off)) | 
|  | off = find_first_bit(tid_info->bitmap, off); | 
|  |  | 
|  | tid_info->bsn += off; | 
|  | tid_info->bsn &= 0x0fff; | 
|  |  | 
|  | bitmap_shift_right(tid_info->bitmap, tid_info->bitmap, | 
|  | off, CARL9170_BAW_BITS); | 
|  | } | 
|  |  | 
|  | static void carl9170_tx_status_process_ampdu(struct ar9170 *ar, | 
|  | struct sk_buff *skb, struct ieee80211_tx_info *txinfo) | 
|  | { | 
|  | struct _carl9170_tx_superframe *super = (void *) skb->data; | 
|  | struct ieee80211_hdr *hdr = (void *) super->frame_data; | 
|  | struct ieee80211_sta *sta; | 
|  | struct carl9170_sta_info *sta_info; | 
|  | struct carl9170_sta_tid *tid_info; | 
|  | u8 tid; | 
|  |  | 
|  | if (!(txinfo->flags & IEEE80211_TX_CTL_AMPDU) || | 
|  | txinfo->flags & IEEE80211_TX_CTL_INJECTED) | 
|  | return; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | sta = __carl9170_get_tx_sta(ar, skb); | 
|  | if (unlikely(!sta)) | 
|  | goto out_rcu; | 
|  |  | 
|  | tid = get_tid_h(hdr); | 
|  |  | 
|  | sta_info = (void *) sta->drv_priv; | 
|  | tid_info = rcu_dereference(sta_info->agg[tid]); | 
|  | if (!tid_info) | 
|  | goto out_rcu; | 
|  |  | 
|  | spin_lock_bh(&tid_info->lock); | 
|  | if (likely(tid_info->state >= CARL9170_TID_STATE_IDLE)) | 
|  | carl9170_tx_shift_bm(ar, tid_info, get_seq_h(hdr)); | 
|  |  | 
|  | if (sta_info->stats[tid].clear) { | 
|  | sta_info->stats[tid].clear = false; | 
|  | sta_info->stats[tid].req = false; | 
|  | sta_info->stats[tid].ampdu_len = 0; | 
|  | sta_info->stats[tid].ampdu_ack_len = 0; | 
|  | } | 
|  |  | 
|  | sta_info->stats[tid].ampdu_len++; | 
|  | if (txinfo->status.rates[0].count == 1) | 
|  | sta_info->stats[tid].ampdu_ack_len++; | 
|  |  | 
|  | if (!(txinfo->flags & IEEE80211_TX_STAT_ACK)) | 
|  | sta_info->stats[tid].req = true; | 
|  |  | 
|  | if (super->f.mac_control & cpu_to_le16(AR9170_TX_MAC_IMM_BA)) { | 
|  | super->s.rix = sta_info->stats[tid].ampdu_len; | 
|  | super->s.cnt = sta_info->stats[tid].ampdu_ack_len; | 
|  | txinfo->flags |= IEEE80211_TX_STAT_AMPDU; | 
|  | if (sta_info->stats[tid].req) | 
|  | txinfo->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; | 
|  |  | 
|  | sta_info->stats[tid].clear = true; | 
|  | } | 
|  | spin_unlock_bh(&tid_info->lock); | 
|  |  | 
|  | out_rcu: | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static void carl9170_tx_bar_status(struct ar9170 *ar, struct sk_buff *skb, | 
|  | struct ieee80211_tx_info *tx_info) | 
|  | { | 
|  | struct _carl9170_tx_superframe *super = (void *) skb->data; | 
|  | struct ieee80211_bar *bar = (void *) super->frame_data; | 
|  |  | 
|  | /* | 
|  | * Unlike all other frames, the status report for BARs does | 
|  | * not directly come from the hardware as it is incapable of | 
|  | * matching a BA to a previously send BAR. | 
|  | * Instead the RX-path will scan for incoming BAs and set the | 
|  | * IEEE80211_TX_STAT_ACK if it sees one that was likely | 
|  | * caused by a BAR from us. | 
|  | */ | 
|  |  | 
|  | if (unlikely(ieee80211_is_back_req(bar->frame_control)) && | 
|  | !(tx_info->flags & IEEE80211_TX_STAT_ACK)) { | 
|  | struct carl9170_bar_list_entry *entry; | 
|  | int queue = skb_get_queue_mapping(skb); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(entry, &ar->bar_list[queue], list) { | 
|  | if (entry->skb == skb) { | 
|  | spin_lock_bh(&ar->bar_list_lock[queue]); | 
|  | list_del_rcu(&entry->list); | 
|  | spin_unlock_bh(&ar->bar_list_lock[queue]); | 
|  | kfree_rcu(entry, head); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | WARN(1, "bar not found in %d - ra:%pM ta:%pM c:%x ssn:%x\n", | 
|  | queue, bar->ra, bar->ta, bar->control, | 
|  | bar->start_seq_num); | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  | } | 
|  | } | 
|  |  | 
|  | void carl9170_tx_status(struct ar9170 *ar, struct sk_buff *skb, | 
|  | const bool success) | 
|  | { | 
|  | struct ieee80211_tx_info *txinfo; | 
|  |  | 
|  | carl9170_tx_accounting_free(ar, skb); | 
|  |  | 
|  | txinfo = IEEE80211_SKB_CB(skb); | 
|  |  | 
|  | carl9170_tx_bar_status(ar, skb, txinfo); | 
|  |  | 
|  | if (success) | 
|  | txinfo->flags |= IEEE80211_TX_STAT_ACK; | 
|  | else | 
|  | ar->tx_ack_failures++; | 
|  |  | 
|  | if (txinfo->flags & IEEE80211_TX_CTL_AMPDU) | 
|  | carl9170_tx_status_process_ampdu(ar, skb, txinfo); | 
|  |  | 
|  | carl9170_tx_ps_unblock(ar, skb); | 
|  | carl9170_tx_put_skb(skb); | 
|  | } | 
|  |  | 
|  | /* This function may be called form any context */ | 
|  | void carl9170_tx_callback(struct ar9170 *ar, struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb); | 
|  |  | 
|  | atomic_dec(&ar->tx_total_pending); | 
|  |  | 
|  | if (txinfo->flags & IEEE80211_TX_CTL_AMPDU) | 
|  | atomic_dec(&ar->tx_ampdu_upload); | 
|  |  | 
|  | if (carl9170_tx_put_skb(skb)) | 
|  | tasklet_hi_schedule(&ar->usb_tasklet); | 
|  | } | 
|  |  | 
|  | static struct sk_buff *carl9170_get_queued_skb(struct ar9170 *ar, u8 cookie, | 
|  | struct sk_buff_head *queue) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | spin_lock_bh(&queue->lock); | 
|  | skb_queue_walk(queue, skb) { | 
|  | struct _carl9170_tx_superframe *txc = (void *) skb->data; | 
|  |  | 
|  | if (txc->s.cookie != cookie) | 
|  | continue; | 
|  |  | 
|  | __skb_unlink(skb, queue); | 
|  | spin_unlock_bh(&queue->lock); | 
|  |  | 
|  | carl9170_release_dev_space(ar, skb); | 
|  | return skb; | 
|  | } | 
|  | spin_unlock_bh(&queue->lock); | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void carl9170_tx_fill_rateinfo(struct ar9170 *ar, unsigned int rix, | 
|  | unsigned int tries, struct ieee80211_tx_info *txinfo) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { | 
|  | if (txinfo->status.rates[i].idx < 0) | 
|  | break; | 
|  |  | 
|  | if (i == rix) { | 
|  | txinfo->status.rates[i].count = tries; | 
|  | i++; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (; i < IEEE80211_TX_MAX_RATES; i++) { | 
|  | txinfo->status.rates[i].idx = -1; | 
|  | txinfo->status.rates[i].count = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void carl9170_check_queue_stop_timeout(struct ar9170 *ar) | 
|  | { | 
|  | int i; | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_tx_info *txinfo; | 
|  | struct carl9170_tx_info *arinfo; | 
|  | bool restart = false; | 
|  |  | 
|  | for (i = 0; i < ar->hw->queues; i++) { | 
|  | spin_lock_bh(&ar->tx_status[i].lock); | 
|  |  | 
|  | skb = skb_peek(&ar->tx_status[i]); | 
|  |  | 
|  | if (!skb) | 
|  | goto next; | 
|  |  | 
|  | txinfo = IEEE80211_SKB_CB(skb); | 
|  | arinfo = (void *) txinfo->rate_driver_data; | 
|  |  | 
|  | if (time_is_before_jiffies(arinfo->timeout + | 
|  | msecs_to_jiffies(CARL9170_QUEUE_STUCK_TIMEOUT)) == true) | 
|  | restart = true; | 
|  |  | 
|  | next: | 
|  | spin_unlock_bh(&ar->tx_status[i].lock); | 
|  | } | 
|  |  | 
|  | if (restart) { | 
|  | /* | 
|  | * At least one queue has been stuck for long enough. | 
|  | * Give the device a kick and hope it gets back to | 
|  | * work. | 
|  | * | 
|  | * possible reasons may include: | 
|  | *  - frames got lost/corrupted (bad connection to the device) | 
|  | *  - stalled rx processing/usb controller hiccups | 
|  | *  - firmware errors/bugs | 
|  | *  - every bug you can think of. | 
|  | *  - all bugs you can't... | 
|  | *  - ... | 
|  | */ | 
|  | carl9170_restart(ar, CARL9170_RR_STUCK_TX); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void carl9170_tx_ampdu_timeout(struct ar9170 *ar) | 
|  | { | 
|  | struct carl9170_sta_tid *iter; | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_tx_info *txinfo; | 
|  | struct carl9170_tx_info *arinfo; | 
|  | struct ieee80211_sta *sta; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(iter, &ar->tx_ampdu_list, list) { | 
|  | if (iter->state < CARL9170_TID_STATE_IDLE) | 
|  | continue; | 
|  |  | 
|  | spin_lock_bh(&iter->lock); | 
|  | skb = skb_peek(&iter->queue); | 
|  | if (!skb) | 
|  | goto unlock; | 
|  |  | 
|  | txinfo = IEEE80211_SKB_CB(skb); | 
|  | arinfo = (void *)txinfo->rate_driver_data; | 
|  | if (time_is_after_jiffies(arinfo->timeout + | 
|  | msecs_to_jiffies(CARL9170_QUEUE_TIMEOUT))) | 
|  | goto unlock; | 
|  |  | 
|  | sta = iter->sta; | 
|  | if (WARN_ON(!sta)) | 
|  | goto unlock; | 
|  |  | 
|  | ieee80211_stop_tx_ba_session(sta, iter->tid); | 
|  | unlock: | 
|  | spin_unlock_bh(&iter->lock); | 
|  |  | 
|  | } | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | void carl9170_tx_janitor(struct work_struct *work) | 
|  | { | 
|  | struct ar9170 *ar = container_of(work, struct ar9170, | 
|  | tx_janitor.work); | 
|  | if (!IS_STARTED(ar)) | 
|  | return; | 
|  |  | 
|  | ar->tx_janitor_last_run = jiffies; | 
|  |  | 
|  | carl9170_check_queue_stop_timeout(ar); | 
|  | carl9170_tx_ampdu_timeout(ar); | 
|  |  | 
|  | if (!atomic_read(&ar->tx_total_queued)) | 
|  | return; | 
|  |  | 
|  | ieee80211_queue_delayed_work(ar->hw, &ar->tx_janitor, | 
|  | msecs_to_jiffies(CARL9170_TX_TIMEOUT)); | 
|  | } | 
|  |  | 
|  | static void __carl9170_tx_process_status(struct ar9170 *ar, | 
|  | const uint8_t cookie, const uint8_t info) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_tx_info *txinfo; | 
|  | unsigned int r, t, q; | 
|  | bool success = true; | 
|  |  | 
|  | q = ar9170_qmap[info & CARL9170_TX_STATUS_QUEUE]; | 
|  |  | 
|  | skb = carl9170_get_queued_skb(ar, cookie, &ar->tx_status[q]); | 
|  | if (!skb) { | 
|  | /* | 
|  | * We have lost the race to another thread. | 
|  | */ | 
|  |  | 
|  | return ; | 
|  | } | 
|  |  | 
|  | txinfo = IEEE80211_SKB_CB(skb); | 
|  |  | 
|  | if (!(info & CARL9170_TX_STATUS_SUCCESS)) | 
|  | success = false; | 
|  |  | 
|  | r = (info & CARL9170_TX_STATUS_RIX) >> CARL9170_TX_STATUS_RIX_S; | 
|  | t = (info & CARL9170_TX_STATUS_TRIES) >> CARL9170_TX_STATUS_TRIES_S; | 
|  |  | 
|  | carl9170_tx_fill_rateinfo(ar, r, t, txinfo); | 
|  | carl9170_tx_status(ar, skb, success); | 
|  | } | 
|  |  | 
|  | void carl9170_tx_process_status(struct ar9170 *ar, | 
|  | const struct carl9170_rsp *cmd) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | for (i = 0;  i < cmd->hdr.ext; i++) { | 
|  | if (WARN_ON(i > ((cmd->hdr.len / 2) + 1))) { | 
|  | print_hex_dump_bytes("UU:", DUMP_PREFIX_NONE, | 
|  | (void *) cmd, cmd->hdr.len + 4); | 
|  | break; | 
|  | } | 
|  |  | 
|  | __carl9170_tx_process_status(ar, cmd->_tx_status[i].cookie, | 
|  | cmd->_tx_status[i].info); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void carl9170_tx_rate_tpc_chains(struct ar9170 *ar, | 
|  | struct ieee80211_tx_info *info,	struct ieee80211_tx_rate *txrate, | 
|  | unsigned int *phyrate, unsigned int *tpc, unsigned int *chains) | 
|  | { | 
|  | struct ieee80211_rate *rate = NULL; | 
|  | u8 *txpower; | 
|  | unsigned int idx; | 
|  |  | 
|  | idx = txrate->idx; | 
|  | *tpc = 0; | 
|  | *phyrate = 0; | 
|  |  | 
|  | if (txrate->flags & IEEE80211_TX_RC_MCS) { | 
|  | if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) { | 
|  | /* +1 dBm for HT40 */ | 
|  | *tpc += 2; | 
|  |  | 
|  | if (info->band == IEEE80211_BAND_2GHZ) | 
|  | txpower = ar->power_2G_ht40; | 
|  | else | 
|  | txpower = ar->power_5G_ht40; | 
|  | } else { | 
|  | if (info->band == IEEE80211_BAND_2GHZ) | 
|  | txpower = ar->power_2G_ht20; | 
|  | else | 
|  | txpower = ar->power_5G_ht20; | 
|  | } | 
|  |  | 
|  | *phyrate = txrate->idx; | 
|  | *tpc += txpower[idx & 7]; | 
|  | } else { | 
|  | if (info->band == IEEE80211_BAND_2GHZ) { | 
|  | if (idx < 4) | 
|  | txpower = ar->power_2G_cck; | 
|  | else | 
|  | txpower = ar->power_2G_ofdm; | 
|  | } else { | 
|  | txpower = ar->power_5G_leg; | 
|  | idx += 4; | 
|  | } | 
|  |  | 
|  | rate = &__carl9170_ratetable[idx]; | 
|  | *tpc += txpower[(rate->hw_value & 0x30) >> 4]; | 
|  | *phyrate = rate->hw_value & 0xf; | 
|  | } | 
|  |  | 
|  | if (ar->eeprom.tx_mask == 1) { | 
|  | *chains = AR9170_TX_PHY_TXCHAIN_1; | 
|  | } else { | 
|  | if (!(txrate->flags & IEEE80211_TX_RC_MCS) && | 
|  | rate && rate->bitrate >= 360) | 
|  | *chains = AR9170_TX_PHY_TXCHAIN_1; | 
|  | else | 
|  | *chains = AR9170_TX_PHY_TXCHAIN_2; | 
|  | } | 
|  |  | 
|  | *tpc = min_t(unsigned int, *tpc, ar->hw->conf.power_level * 2); | 
|  | } | 
|  |  | 
|  | static __le32 carl9170_tx_physet(struct ar9170 *ar, | 
|  | struct ieee80211_tx_info *info, struct ieee80211_tx_rate *txrate) | 
|  | { | 
|  | unsigned int power = 0, chains = 0, phyrate = 0; | 
|  | __le32 tmp; | 
|  |  | 
|  | tmp = cpu_to_le32(0); | 
|  |  | 
|  | if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) | 
|  | tmp |= cpu_to_le32(AR9170_TX_PHY_BW_40MHZ << | 
|  | AR9170_TX_PHY_BW_S); | 
|  | /* this works because 40 MHz is 2 and dup is 3 */ | 
|  | if (txrate->flags & IEEE80211_TX_RC_DUP_DATA) | 
|  | tmp |= cpu_to_le32(AR9170_TX_PHY_BW_40MHZ_DUP << | 
|  | AR9170_TX_PHY_BW_S); | 
|  |  | 
|  | if (txrate->flags & IEEE80211_TX_RC_SHORT_GI) | 
|  | tmp |= cpu_to_le32(AR9170_TX_PHY_SHORT_GI); | 
|  |  | 
|  | if (txrate->flags & IEEE80211_TX_RC_MCS) { | 
|  | SET_VAL(AR9170_TX_PHY_MCS, phyrate, txrate->idx); | 
|  |  | 
|  | /* heavy clip control */ | 
|  | tmp |= cpu_to_le32((txrate->idx & 0x7) << | 
|  | AR9170_TX_PHY_TX_HEAVY_CLIP_S); | 
|  |  | 
|  | tmp |= cpu_to_le32(AR9170_TX_PHY_MOD_HT); | 
|  |  | 
|  | /* | 
|  | * green field preamble does not work. | 
|  | * | 
|  | * if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD) | 
|  | * tmp |= cpu_to_le32(AR9170_TX_PHY_GREENFIELD); | 
|  | */ | 
|  | } else { | 
|  | if (info->band == IEEE80211_BAND_2GHZ) { | 
|  | if (txrate->idx <= AR9170_TX_PHY_RATE_CCK_11M) | 
|  | tmp |= cpu_to_le32(AR9170_TX_PHY_MOD_CCK); | 
|  | else | 
|  | tmp |= cpu_to_le32(AR9170_TX_PHY_MOD_OFDM); | 
|  | } else { | 
|  | tmp |= cpu_to_le32(AR9170_TX_PHY_MOD_OFDM); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * short preamble seems to be broken too. | 
|  | * | 
|  | * if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) | 
|  | *	tmp |= cpu_to_le32(AR9170_TX_PHY_SHORT_PREAMBLE); | 
|  | */ | 
|  | } | 
|  | carl9170_tx_rate_tpc_chains(ar, info, txrate, | 
|  | &phyrate, &power, &chains); | 
|  |  | 
|  | tmp |= cpu_to_le32(SET_CONSTVAL(AR9170_TX_PHY_MCS, phyrate)); | 
|  | tmp |= cpu_to_le32(SET_CONSTVAL(AR9170_TX_PHY_TX_PWR, power)); | 
|  | tmp |= cpu_to_le32(SET_CONSTVAL(AR9170_TX_PHY_TXCHAIN, chains)); | 
|  | return tmp; | 
|  | } | 
|  |  | 
|  | static bool carl9170_tx_rts_check(struct ar9170 *ar, | 
|  | struct ieee80211_tx_rate *rate, | 
|  | bool ampdu, bool multi) | 
|  | { | 
|  | switch (ar->erp_mode) { | 
|  | case CARL9170_ERP_AUTO: | 
|  | if (ampdu) | 
|  | break; | 
|  |  | 
|  | case CARL9170_ERP_MAC80211: | 
|  | if (!(rate->flags & IEEE80211_TX_RC_USE_RTS_CTS)) | 
|  | break; | 
|  |  | 
|  | case CARL9170_ERP_RTS: | 
|  | if (likely(!multi)) | 
|  | return true; | 
|  |  | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static bool carl9170_tx_cts_check(struct ar9170 *ar, | 
|  | struct ieee80211_tx_rate *rate) | 
|  | { | 
|  | switch (ar->erp_mode) { | 
|  | case CARL9170_ERP_AUTO: | 
|  | case CARL9170_ERP_MAC80211: | 
|  | if (!(rate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) | 
|  | break; | 
|  |  | 
|  | case CARL9170_ERP_CTS: | 
|  | return true; | 
|  |  | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static void carl9170_tx_get_rates(struct ar9170 *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_tx_info *info; | 
|  |  | 
|  | BUILD_BUG_ON(IEEE80211_TX_MAX_RATES < CARL9170_TX_MAX_RATES); | 
|  | BUILD_BUG_ON(IEEE80211_TX_MAX_RATES > IEEE80211_TX_RATE_TABLE_SIZE); | 
|  |  | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  |  | 
|  | ieee80211_get_tx_rates(vif, sta, skb, | 
|  | info->control.rates, | 
|  | IEEE80211_TX_MAX_RATES); | 
|  | } | 
|  |  | 
|  | static void carl9170_tx_apply_rateset(struct ar9170 *ar, | 
|  | struct ieee80211_tx_info *sinfo, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_tx_rate *txrate; | 
|  | struct ieee80211_tx_info *info; | 
|  | struct _carl9170_tx_superframe *txc = (void *) skb->data; | 
|  | int i; | 
|  | bool ampdu; | 
|  | bool no_ack; | 
|  |  | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  | ampdu = !!(info->flags & IEEE80211_TX_CTL_AMPDU); | 
|  | no_ack = !!(info->flags & IEEE80211_TX_CTL_NO_ACK); | 
|  |  | 
|  | /* Set the rate control probe flag for all (sub-) frames. | 
|  | * This is because the TX_STATS_AMPDU flag is only set on | 
|  | * the last frame, so it has to be inherited. | 
|  | */ | 
|  | info->flags |= (sinfo->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE); | 
|  |  | 
|  | /* NOTE: For the first rate, the ERP & AMPDU flags are directly | 
|  | * taken from mac_control. For all fallback rate, the firmware | 
|  | * updates the mac_control flags from the rate info field. | 
|  | */ | 
|  | for (i = 0; i < CARL9170_TX_MAX_RATES; i++) { | 
|  | __le32 phy_set; | 
|  |  | 
|  | txrate = &sinfo->control.rates[i]; | 
|  | if (txrate->idx < 0) | 
|  | break; | 
|  |  | 
|  | phy_set = carl9170_tx_physet(ar, info, txrate); | 
|  | if (i == 0) { | 
|  | __le16 mac_tmp = cpu_to_le16(0); | 
|  |  | 
|  | /* first rate - part of the hw's frame header */ | 
|  | txc->f.phy_control = phy_set; | 
|  |  | 
|  | if (ampdu && txrate->flags & IEEE80211_TX_RC_MCS) | 
|  | mac_tmp |= cpu_to_le16(AR9170_TX_MAC_AGGR); | 
|  |  | 
|  | if (carl9170_tx_rts_check(ar, txrate, ampdu, no_ack)) | 
|  | mac_tmp |= cpu_to_le16(AR9170_TX_MAC_PROT_RTS); | 
|  | else if (carl9170_tx_cts_check(ar, txrate)) | 
|  | mac_tmp |= cpu_to_le16(AR9170_TX_MAC_PROT_CTS); | 
|  |  | 
|  | txc->f.mac_control |= mac_tmp; | 
|  | } else { | 
|  | /* fallback rates are stored in the firmware's | 
|  | * retry rate set array. | 
|  | */ | 
|  | txc->s.rr[i - 1] = phy_set; | 
|  | } | 
|  |  | 
|  | SET_VAL(CARL9170_TX_SUPER_RI_TRIES, txc->s.ri[i], | 
|  | txrate->count); | 
|  |  | 
|  | if (carl9170_tx_rts_check(ar, txrate, ampdu, no_ack)) | 
|  | txc->s.ri[i] |= (AR9170_TX_MAC_PROT_RTS << | 
|  | CARL9170_TX_SUPER_RI_ERP_PROT_S); | 
|  | else if (carl9170_tx_cts_check(ar, txrate)) | 
|  | txc->s.ri[i] |= (AR9170_TX_MAC_PROT_CTS << | 
|  | CARL9170_TX_SUPER_RI_ERP_PROT_S); | 
|  |  | 
|  | if (ampdu && (txrate->flags & IEEE80211_TX_RC_MCS)) | 
|  | txc->s.ri[i] |= CARL9170_TX_SUPER_RI_AMPDU; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int carl9170_tx_prepare(struct ar9170 *ar, | 
|  | struct ieee80211_sta *sta, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct _carl9170_tx_superframe *txc; | 
|  | struct carl9170_vif_info *cvif; | 
|  | struct ieee80211_tx_info *info; | 
|  | struct carl9170_tx_info *arinfo; | 
|  | unsigned int hw_queue; | 
|  | __le16 mac_tmp; | 
|  | u16 len; | 
|  |  | 
|  | BUILD_BUG_ON(sizeof(*arinfo) > sizeof(info->rate_driver_data)); | 
|  | BUILD_BUG_ON(sizeof(struct _carl9170_tx_superdesc) != | 
|  | CARL9170_TX_SUPERDESC_LEN); | 
|  |  | 
|  | BUILD_BUG_ON(sizeof(struct _ar9170_tx_hwdesc) != | 
|  | AR9170_TX_HWDESC_LEN); | 
|  |  | 
|  | BUILD_BUG_ON(AR9170_MAX_VIRTUAL_MAC > | 
|  | ((CARL9170_TX_SUPER_MISC_VIF_ID >> | 
|  | CARL9170_TX_SUPER_MISC_VIF_ID_S) + 1)); | 
|  |  | 
|  | hw_queue = ar9170_qmap[carl9170_get_queue(ar, skb)]; | 
|  |  | 
|  | hdr = (void *)skb->data; | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  | len = skb->len; | 
|  |  | 
|  | /* | 
|  | * Note: If the frame was sent through a monitor interface, | 
|  | * the ieee80211_vif pointer can be NULL. | 
|  | */ | 
|  | if (likely(info->control.vif)) | 
|  | cvif = (void *) info->control.vif->drv_priv; | 
|  | else | 
|  | cvif = NULL; | 
|  |  | 
|  | txc = (void *)skb_push(skb, sizeof(*txc)); | 
|  | memset(txc, 0, sizeof(*txc)); | 
|  |  | 
|  | SET_VAL(CARL9170_TX_SUPER_MISC_QUEUE, txc->s.misc, hw_queue); | 
|  |  | 
|  | if (likely(cvif)) | 
|  | SET_VAL(CARL9170_TX_SUPER_MISC_VIF_ID, txc->s.misc, cvif->id); | 
|  |  | 
|  | if (unlikely(info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM)) | 
|  | txc->s.misc |= CARL9170_TX_SUPER_MISC_CAB; | 
|  |  | 
|  | if (unlikely(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)) | 
|  | txc->s.misc |= CARL9170_TX_SUPER_MISC_ASSIGN_SEQ; | 
|  |  | 
|  | if (unlikely(ieee80211_is_probe_resp(hdr->frame_control))) | 
|  | txc->s.misc |= CARL9170_TX_SUPER_MISC_FILL_IN_TSF; | 
|  |  | 
|  | mac_tmp = cpu_to_le16(AR9170_TX_MAC_HW_DURATION | | 
|  | AR9170_TX_MAC_BACKOFF); | 
|  | mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) & | 
|  | AR9170_TX_MAC_QOS); | 
|  |  | 
|  | if (unlikely(info->flags & IEEE80211_TX_CTL_NO_ACK)) | 
|  | mac_tmp |= cpu_to_le16(AR9170_TX_MAC_NO_ACK); | 
|  |  | 
|  | if (info->control.hw_key) { | 
|  | len += info->control.hw_key->icv_len; | 
|  |  | 
|  | switch (info->control.hw_key->cipher) { | 
|  | case WLAN_CIPHER_SUITE_WEP40: | 
|  | case WLAN_CIPHER_SUITE_WEP104: | 
|  | case WLAN_CIPHER_SUITE_TKIP: | 
|  | mac_tmp |= cpu_to_le16(AR9170_TX_MAC_ENCR_RC4); | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | mac_tmp |= cpu_to_le16(AR9170_TX_MAC_ENCR_AES); | 
|  | break; | 
|  | default: | 
|  | WARN_ON(1); | 
|  | goto err_out; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (info->flags & IEEE80211_TX_CTL_AMPDU) { | 
|  | unsigned int density, factor; | 
|  |  | 
|  | if (unlikely(!sta || !cvif)) | 
|  | goto err_out; | 
|  |  | 
|  | factor = min_t(unsigned int, 1u, sta->ht_cap.ampdu_factor); | 
|  | density = sta->ht_cap.ampdu_density; | 
|  |  | 
|  | if (density) { | 
|  | /* | 
|  | * Watch out! | 
|  | * | 
|  | * Otus uses slightly different density values than | 
|  | * those from the 802.11n spec. | 
|  | */ | 
|  |  | 
|  | density = max_t(unsigned int, density + 1, 7u); | 
|  | } | 
|  |  | 
|  | SET_VAL(CARL9170_TX_SUPER_AMPDU_DENSITY, | 
|  | txc->s.ampdu_settings, density); | 
|  |  | 
|  | SET_VAL(CARL9170_TX_SUPER_AMPDU_FACTOR, | 
|  | txc->s.ampdu_settings, factor); | 
|  | } | 
|  |  | 
|  | txc->s.len = cpu_to_le16(skb->len); | 
|  | txc->f.length = cpu_to_le16(len + FCS_LEN); | 
|  | txc->f.mac_control = mac_tmp; | 
|  |  | 
|  | arinfo = (void *)info->rate_driver_data; | 
|  | arinfo->timeout = jiffies; | 
|  | arinfo->ar = ar; | 
|  | kref_init(&arinfo->ref); | 
|  | return 0; | 
|  |  | 
|  | err_out: | 
|  | skb_pull(skb, sizeof(*txc)); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static void carl9170_set_immba(struct ar9170 *ar, struct sk_buff *skb) | 
|  | { | 
|  | struct _carl9170_tx_superframe *super; | 
|  |  | 
|  | super = (void *) skb->data; | 
|  | super->f.mac_control |= cpu_to_le16(AR9170_TX_MAC_IMM_BA); | 
|  | } | 
|  |  | 
|  | static void carl9170_set_ampdu_params(struct ar9170 *ar, struct sk_buff *skb) | 
|  | { | 
|  | struct _carl9170_tx_superframe *super; | 
|  | int tmp; | 
|  |  | 
|  | super = (void *) skb->data; | 
|  |  | 
|  | tmp = (super->s.ampdu_settings & CARL9170_TX_SUPER_AMPDU_DENSITY) << | 
|  | CARL9170_TX_SUPER_AMPDU_DENSITY_S; | 
|  |  | 
|  | /* | 
|  | * If you haven't noticed carl9170_tx_prepare has already filled | 
|  | * in all ampdu spacing & factor parameters. | 
|  | * Now it's the time to check whenever the settings have to be | 
|  | * updated by the firmware, or if everything is still the same. | 
|  | * | 
|  | * There's no sane way to handle different density values with | 
|  | * this hardware, so we may as well just do the compare in the | 
|  | * driver. | 
|  | */ | 
|  |  | 
|  | if (tmp != ar->current_density) { | 
|  | ar->current_density = tmp; | 
|  | super->s.ampdu_settings |= | 
|  | CARL9170_TX_SUPER_AMPDU_COMMIT_DENSITY; | 
|  | } | 
|  |  | 
|  | tmp = (super->s.ampdu_settings & CARL9170_TX_SUPER_AMPDU_FACTOR) << | 
|  | CARL9170_TX_SUPER_AMPDU_FACTOR_S; | 
|  |  | 
|  | if (tmp != ar->current_factor) { | 
|  | ar->current_factor = tmp; | 
|  | super->s.ampdu_settings |= | 
|  | CARL9170_TX_SUPER_AMPDU_COMMIT_FACTOR; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void carl9170_tx_ampdu(struct ar9170 *ar) | 
|  | { | 
|  | struct sk_buff_head agg; | 
|  | struct carl9170_sta_tid *tid_info; | 
|  | struct sk_buff *skb, *first; | 
|  | struct ieee80211_tx_info *tx_info_first; | 
|  | unsigned int i = 0, done_ampdus = 0; | 
|  | u16 seq, queue, tmpssn; | 
|  |  | 
|  | atomic_inc(&ar->tx_ampdu_scheduler); | 
|  | ar->tx_ampdu_schedule = false; | 
|  |  | 
|  | if (atomic_read(&ar->tx_ampdu_upload)) | 
|  | return; | 
|  |  | 
|  | if (!ar->tx_ampdu_list_len) | 
|  | return; | 
|  |  | 
|  | __skb_queue_head_init(&agg); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | tid_info = rcu_dereference(ar->tx_ampdu_iter); | 
|  | if (WARN_ON_ONCE(!tid_info)) { | 
|  | rcu_read_unlock(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | retry: | 
|  | list_for_each_entry_continue_rcu(tid_info, &ar->tx_ampdu_list, list) { | 
|  | i++; | 
|  |  | 
|  | if (tid_info->state < CARL9170_TID_STATE_PROGRESS) | 
|  | continue; | 
|  |  | 
|  | queue = TID_TO_WME_AC(tid_info->tid); | 
|  |  | 
|  | spin_lock_bh(&tid_info->lock); | 
|  | if (tid_info->state != CARL9170_TID_STATE_XMIT) | 
|  | goto processed; | 
|  |  | 
|  | tid_info->counter++; | 
|  | first = skb_peek(&tid_info->queue); | 
|  | tmpssn = carl9170_get_seq(first); | 
|  | seq = tid_info->snx; | 
|  |  | 
|  | if (unlikely(tmpssn != seq)) { | 
|  | tid_info->state = CARL9170_TID_STATE_IDLE; | 
|  |  | 
|  | goto processed; | 
|  | } | 
|  |  | 
|  | tx_info_first = NULL; | 
|  | while ((skb = skb_peek(&tid_info->queue))) { | 
|  | /* strict 0, 1, ..., n - 1, n frame sequence order */ | 
|  | if (unlikely(carl9170_get_seq(skb) != seq)) | 
|  | break; | 
|  |  | 
|  | /* don't upload more than AMPDU FACTOR allows. */ | 
|  | if (unlikely(SEQ_DIFF(tid_info->snx, tid_info->bsn) >= | 
|  | (tid_info->max - 1))) | 
|  | break; | 
|  |  | 
|  | if (!tx_info_first) { | 
|  | carl9170_tx_get_rates(ar, tid_info->vif, | 
|  | tid_info->sta, first); | 
|  | tx_info_first = IEEE80211_SKB_CB(first); | 
|  | } | 
|  |  | 
|  | carl9170_tx_apply_rateset(ar, tx_info_first, skb); | 
|  |  | 
|  | atomic_inc(&ar->tx_ampdu_upload); | 
|  | tid_info->snx = seq = SEQ_NEXT(seq); | 
|  | __skb_unlink(skb, &tid_info->queue); | 
|  |  | 
|  | __skb_queue_tail(&agg, skb); | 
|  |  | 
|  | if (skb_queue_len(&agg) >= CARL9170_NUM_TX_AGG_MAX) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (skb_queue_empty(&tid_info->queue) || | 
|  | carl9170_get_seq(skb_peek(&tid_info->queue)) != | 
|  | tid_info->snx) { | 
|  | /* stop TID, if A-MPDU frames are still missing, | 
|  | * or whenever the queue is empty. | 
|  | */ | 
|  |  | 
|  | tid_info->state = CARL9170_TID_STATE_IDLE; | 
|  | } | 
|  | done_ampdus++; | 
|  |  | 
|  | processed: | 
|  | spin_unlock_bh(&tid_info->lock); | 
|  |  | 
|  | if (skb_queue_empty(&agg)) | 
|  | continue; | 
|  |  | 
|  | /* apply ampdu spacing & factor settings */ | 
|  | carl9170_set_ampdu_params(ar, skb_peek(&agg)); | 
|  |  | 
|  | /* set aggregation push bit */ | 
|  | carl9170_set_immba(ar, skb_peek_tail(&agg)); | 
|  |  | 
|  | spin_lock_bh(&ar->tx_pending[queue].lock); | 
|  | skb_queue_splice_tail_init(&agg, &ar->tx_pending[queue]); | 
|  | spin_unlock_bh(&ar->tx_pending[queue].lock); | 
|  | ar->tx_schedule = true; | 
|  | } | 
|  | if ((done_ampdus++ == 0) && (i++ == 0)) | 
|  | goto retry; | 
|  |  | 
|  | rcu_assign_pointer(ar->tx_ampdu_iter, tid_info); | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static struct sk_buff *carl9170_tx_pick_skb(struct ar9170 *ar, | 
|  | struct sk_buff_head *queue) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_tx_info *info; | 
|  | struct carl9170_tx_info *arinfo; | 
|  |  | 
|  | BUILD_BUG_ON(sizeof(*arinfo) > sizeof(info->rate_driver_data)); | 
|  |  | 
|  | spin_lock_bh(&queue->lock); | 
|  | skb = skb_peek(queue); | 
|  | if (unlikely(!skb)) | 
|  | goto err_unlock; | 
|  |  | 
|  | if (carl9170_alloc_dev_space(ar, skb)) | 
|  | goto err_unlock; | 
|  |  | 
|  | __skb_unlink(skb, queue); | 
|  | spin_unlock_bh(&queue->lock); | 
|  |  | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  | arinfo = (void *) info->rate_driver_data; | 
|  |  | 
|  | arinfo->timeout = jiffies; | 
|  | return skb; | 
|  |  | 
|  | err_unlock: | 
|  | spin_unlock_bh(&queue->lock); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | void carl9170_tx_drop(struct ar9170 *ar, struct sk_buff *skb) | 
|  | { | 
|  | struct _carl9170_tx_superframe *super; | 
|  | uint8_t q = 0; | 
|  |  | 
|  | ar->tx_dropped++; | 
|  |  | 
|  | super = (void *)skb->data; | 
|  | SET_VAL(CARL9170_TX_SUPER_MISC_QUEUE, q, | 
|  | ar9170_qmap[carl9170_get_queue(ar, skb)]); | 
|  | __carl9170_tx_process_status(ar, super->s.cookie, q); | 
|  | } | 
|  |  | 
|  | static bool carl9170_tx_ps_drop(struct ar9170 *ar, struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_sta *sta; | 
|  | struct carl9170_sta_info *sta_info; | 
|  | struct ieee80211_tx_info *tx_info; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | sta = __carl9170_get_tx_sta(ar, skb); | 
|  | if (!sta) | 
|  | goto out_rcu; | 
|  |  | 
|  | sta_info = (void *) sta->drv_priv; | 
|  | tx_info = IEEE80211_SKB_CB(skb); | 
|  |  | 
|  | if (unlikely(sta_info->sleeping) && | 
|  | !(tx_info->flags & (IEEE80211_TX_CTL_NO_PS_BUFFER | | 
|  | IEEE80211_TX_CTL_CLEAR_PS_FILT))) { | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) | 
|  | atomic_dec(&ar->tx_ampdu_upload); | 
|  |  | 
|  | tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED; | 
|  | carl9170_release_dev_space(ar, skb); | 
|  | carl9170_tx_status(ar, skb, false); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | out_rcu: | 
|  | rcu_read_unlock(); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static void carl9170_bar_check(struct ar9170 *ar, struct sk_buff *skb) | 
|  | { | 
|  | struct _carl9170_tx_superframe *super = (void *) skb->data; | 
|  | struct ieee80211_bar *bar = (void *) super->frame_data; | 
|  |  | 
|  | if (unlikely(ieee80211_is_back_req(bar->frame_control)) && | 
|  | skb->len >= sizeof(struct ieee80211_bar)) { | 
|  | struct carl9170_bar_list_entry *entry; | 
|  | unsigned int queue = skb_get_queue_mapping(skb); | 
|  |  | 
|  | entry = kmalloc(sizeof(*entry), GFP_ATOMIC); | 
|  | if (!WARN_ON_ONCE(!entry)) { | 
|  | entry->skb = skb; | 
|  | spin_lock_bh(&ar->bar_list_lock[queue]); | 
|  | list_add_tail_rcu(&entry->list, &ar->bar_list[queue]); | 
|  | spin_unlock_bh(&ar->bar_list_lock[queue]); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void carl9170_tx(struct ar9170 *ar) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | unsigned int i, q; | 
|  | bool schedule_garbagecollector = false; | 
|  |  | 
|  | ar->tx_schedule = false; | 
|  |  | 
|  | if (unlikely(!IS_STARTED(ar))) | 
|  | return; | 
|  |  | 
|  | carl9170_usb_handle_tx_err(ar); | 
|  |  | 
|  | for (i = 0; i < ar->hw->queues; i++) { | 
|  | while (!skb_queue_empty(&ar->tx_pending[i])) { | 
|  | skb = carl9170_tx_pick_skb(ar, &ar->tx_pending[i]); | 
|  | if (unlikely(!skb)) | 
|  | break; | 
|  |  | 
|  | if (unlikely(carl9170_tx_ps_drop(ar, skb))) | 
|  | continue; | 
|  |  | 
|  | carl9170_bar_check(ar, skb); | 
|  |  | 
|  | atomic_inc(&ar->tx_total_pending); | 
|  |  | 
|  | q = __carl9170_get_queue(ar, i); | 
|  | /* | 
|  | * NB: tx_status[i] vs. tx_status[q], | 
|  | * TODO: Move into pick_skb or alloc_dev_space. | 
|  | */ | 
|  | skb_queue_tail(&ar->tx_status[q], skb); | 
|  |  | 
|  | /* | 
|  | * increase ref count to "2". | 
|  | * Ref counting is the easiest way to solve the | 
|  | * race between the urb's completion routine: | 
|  | *	carl9170_tx_callback | 
|  | * and wlan tx status functions: | 
|  | *	carl9170_tx_status/janitor. | 
|  | */ | 
|  | carl9170_tx_get_skb(skb); | 
|  |  | 
|  | carl9170_usb_tx(ar, skb); | 
|  | schedule_garbagecollector = true; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!schedule_garbagecollector) | 
|  | return; | 
|  |  | 
|  | ieee80211_queue_delayed_work(ar->hw, &ar->tx_janitor, | 
|  | msecs_to_jiffies(CARL9170_TX_TIMEOUT)); | 
|  | } | 
|  |  | 
|  | static bool carl9170_tx_ampdu_queue(struct ar9170 *ar, | 
|  | struct ieee80211_sta *sta, struct sk_buff *skb, | 
|  | struct ieee80211_tx_info *txinfo) | 
|  | { | 
|  | struct carl9170_sta_info *sta_info; | 
|  | struct carl9170_sta_tid *agg; | 
|  | struct sk_buff *iter; | 
|  | u16 tid, seq, qseq, off; | 
|  | bool run = false; | 
|  |  | 
|  | tid = carl9170_get_tid(skb); | 
|  | seq = carl9170_get_seq(skb); | 
|  | sta_info = (void *) sta->drv_priv; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | agg = rcu_dereference(sta_info->agg[tid]); | 
|  |  | 
|  | if (!agg) | 
|  | goto err_unlock_rcu; | 
|  |  | 
|  | spin_lock_bh(&agg->lock); | 
|  | if (unlikely(agg->state < CARL9170_TID_STATE_IDLE)) | 
|  | goto err_unlock; | 
|  |  | 
|  | /* check if sequence is within the BA window */ | 
|  | if (unlikely(!BAW_WITHIN(agg->bsn, CARL9170_BAW_BITS, seq))) | 
|  | goto err_unlock; | 
|  |  | 
|  | if (WARN_ON_ONCE(!BAW_WITHIN(agg->snx, CARL9170_BAW_BITS, seq))) | 
|  | goto err_unlock; | 
|  |  | 
|  | off = SEQ_DIFF(seq, agg->bsn); | 
|  | if (WARN_ON_ONCE(test_and_set_bit(off, agg->bitmap))) | 
|  | goto err_unlock; | 
|  |  | 
|  | if (likely(BAW_WITHIN(agg->hsn, CARL9170_BAW_BITS, seq))) { | 
|  | __skb_queue_tail(&agg->queue, skb); | 
|  | agg->hsn = seq; | 
|  | goto queued; | 
|  | } | 
|  |  | 
|  | skb_queue_reverse_walk(&agg->queue, iter) { | 
|  | qseq = carl9170_get_seq(iter); | 
|  |  | 
|  | if (BAW_WITHIN(qseq, CARL9170_BAW_BITS, seq)) { | 
|  | __skb_queue_after(&agg->queue, iter, skb); | 
|  | goto queued; | 
|  | } | 
|  | } | 
|  |  | 
|  | __skb_queue_head(&agg->queue, skb); | 
|  | queued: | 
|  |  | 
|  | if (unlikely(agg->state != CARL9170_TID_STATE_XMIT)) { | 
|  | if (agg->snx == carl9170_get_seq(skb_peek(&agg->queue))) { | 
|  | agg->state = CARL9170_TID_STATE_XMIT; | 
|  | run = true; | 
|  | } | 
|  | } | 
|  |  | 
|  | spin_unlock_bh(&agg->lock); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return run; | 
|  |  | 
|  | err_unlock: | 
|  | spin_unlock_bh(&agg->lock); | 
|  |  | 
|  | err_unlock_rcu: | 
|  | rcu_read_unlock(); | 
|  | txinfo->flags &= ~IEEE80211_TX_CTL_AMPDU; | 
|  | carl9170_tx_status(ar, skb, false); | 
|  | ar->tx_dropped++; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | void carl9170_op_tx(struct ieee80211_hw *hw, | 
|  | struct ieee80211_tx_control *control, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ar9170 *ar = hw->priv; | 
|  | struct ieee80211_tx_info *info; | 
|  | struct ieee80211_sta *sta = control->sta; | 
|  | struct ieee80211_vif *vif; | 
|  | bool run; | 
|  |  | 
|  | if (unlikely(!IS_STARTED(ar))) | 
|  | goto err_free; | 
|  |  | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  | vif = info->control.vif; | 
|  |  | 
|  | if (unlikely(carl9170_tx_prepare(ar, sta, skb))) | 
|  | goto err_free; | 
|  |  | 
|  | carl9170_tx_accounting(ar, skb); | 
|  | /* | 
|  | * from now on, one has to use carl9170_tx_status to free | 
|  | * all ressouces which are associated with the frame. | 
|  | */ | 
|  |  | 
|  | if (sta) { | 
|  | struct carl9170_sta_info *stai = (void *) sta->drv_priv; | 
|  | atomic_inc(&stai->pending_frames); | 
|  | } | 
|  |  | 
|  | if (info->flags & IEEE80211_TX_CTL_AMPDU) { | 
|  | /* to static code analyzers and reviewers: | 
|  | * mac80211 guarantees that a valid "sta" | 
|  | * reference is present, if a frame is to | 
|  | * be part of an ampdu. Hence any extra | 
|  | * sta == NULL checks are redundant in this | 
|  | * special case. | 
|  | */ | 
|  | run = carl9170_tx_ampdu_queue(ar, sta, skb, info); | 
|  | if (run) | 
|  | carl9170_tx_ampdu(ar); | 
|  |  | 
|  | } else { | 
|  | unsigned int queue = skb_get_queue_mapping(skb); | 
|  |  | 
|  | carl9170_tx_get_rates(ar, vif, sta, skb); | 
|  | carl9170_tx_apply_rateset(ar, info, skb); | 
|  | skb_queue_tail(&ar->tx_pending[queue], skb); | 
|  | } | 
|  |  | 
|  | carl9170_tx(ar); | 
|  | return; | 
|  |  | 
|  | err_free: | 
|  | ar->tx_dropped++; | 
|  | ieee80211_free_txskb(ar->hw, skb); | 
|  | } | 
|  |  | 
|  | void carl9170_tx_scheduler(struct ar9170 *ar) | 
|  | { | 
|  |  | 
|  | if (ar->tx_ampdu_schedule) | 
|  | carl9170_tx_ampdu(ar); | 
|  |  | 
|  | if (ar->tx_schedule) | 
|  | carl9170_tx(ar); | 
|  | } | 
|  |  | 
|  | /* caller has to take rcu_read_lock */ | 
|  | static struct carl9170_vif_info *carl9170_pick_beaconing_vif(struct ar9170 *ar) | 
|  | { | 
|  | struct carl9170_vif_info *cvif; | 
|  | int i = 1; | 
|  |  | 
|  | /* The AR9170 hardware has no fancy beacon queue or some | 
|  | * other scheduling mechanism. So, the driver has to make | 
|  | * due by setting the two beacon timers (pretbtt and tbtt) | 
|  | * once and then swapping the beacon address in the HW's | 
|  | * register file each time the pretbtt fires. | 
|  | */ | 
|  |  | 
|  | cvif = rcu_dereference(ar->beacon_iter); | 
|  | if (ar->vifs > 0 && cvif) { | 
|  | do { | 
|  | list_for_each_entry_continue_rcu(cvif, &ar->vif_list, | 
|  | list) { | 
|  | if (cvif->active && cvif->enable_beacon) | 
|  | goto out; | 
|  | } | 
|  | } while (ar->beacon_enabled && i--); | 
|  | } | 
|  |  | 
|  | out: | 
|  | RCU_INIT_POINTER(ar->beacon_iter, cvif); | 
|  | return cvif; | 
|  | } | 
|  |  | 
|  | static bool carl9170_tx_beacon_physet(struct ar9170 *ar, struct sk_buff *skb, | 
|  | u32 *ht1, u32 *plcp) | 
|  | { | 
|  | struct ieee80211_tx_info *txinfo; | 
|  | struct ieee80211_tx_rate *rate; | 
|  | unsigned int power, chains; | 
|  | bool ht_rate; | 
|  |  | 
|  | txinfo = IEEE80211_SKB_CB(skb); | 
|  | rate = &txinfo->control.rates[0]; | 
|  | ht_rate = !!(txinfo->control.rates[0].flags & IEEE80211_TX_RC_MCS); | 
|  | carl9170_tx_rate_tpc_chains(ar, txinfo, rate, plcp, &power, &chains); | 
|  |  | 
|  | *ht1 = AR9170_MAC_BCN_HT1_TX_ANT0; | 
|  | if (chains == AR9170_TX_PHY_TXCHAIN_2) | 
|  | *ht1 |= AR9170_MAC_BCN_HT1_TX_ANT1; | 
|  | SET_VAL(AR9170_MAC_BCN_HT1_PWR_CTRL, *ht1, 7); | 
|  | SET_VAL(AR9170_MAC_BCN_HT1_TPC, *ht1, power); | 
|  | SET_VAL(AR9170_MAC_BCN_HT1_CHAIN_MASK, *ht1, chains); | 
|  |  | 
|  | if (ht_rate) { | 
|  | *ht1 |= AR9170_MAC_BCN_HT1_HT_EN; | 
|  | if (rate->flags & IEEE80211_TX_RC_SHORT_GI) | 
|  | *plcp |= AR9170_MAC_BCN_HT2_SGI; | 
|  |  | 
|  | if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) { | 
|  | *ht1 |= AR9170_MAC_BCN_HT1_BWC_40M_SHARED; | 
|  | *plcp |= AR9170_MAC_BCN_HT2_BW40; | 
|  | } else if (rate->flags & IEEE80211_TX_RC_DUP_DATA) { | 
|  | *ht1 |= AR9170_MAC_BCN_HT1_BWC_40M_DUP; | 
|  | *plcp |= AR9170_MAC_BCN_HT2_BW40; | 
|  | } | 
|  |  | 
|  | SET_VAL(AR9170_MAC_BCN_HT2_LEN, *plcp, skb->len + FCS_LEN); | 
|  | } else { | 
|  | if (*plcp <= AR9170_TX_PHY_RATE_CCK_11M) | 
|  | *plcp |= ((skb->len + FCS_LEN) << (3 + 16)) + 0x0400; | 
|  | else | 
|  | *plcp |= ((skb->len + FCS_LEN) << 16) + 0x0010; | 
|  | } | 
|  |  | 
|  | return ht_rate; | 
|  | } | 
|  |  | 
|  | int carl9170_update_beacon(struct ar9170 *ar, const bool submit) | 
|  | { | 
|  | struct sk_buff *skb = NULL; | 
|  | struct carl9170_vif_info *cvif; | 
|  | __le32 *data, *old = NULL; | 
|  | u32 word, ht1, plcp, off, addr, len; | 
|  | int i = 0, err = 0; | 
|  | bool ht_rate; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | cvif = carl9170_pick_beaconing_vif(ar); | 
|  | if (!cvif) | 
|  | goto out_unlock; | 
|  |  | 
|  | skb = ieee80211_beacon_get_tim(ar->hw, carl9170_get_vif(cvif), | 
|  | NULL, NULL); | 
|  |  | 
|  | if (!skb) { | 
|  | err = -ENOMEM; | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&ar->beacon_lock); | 
|  | data = (__le32 *)skb->data; | 
|  | if (cvif->beacon) | 
|  | old = (__le32 *)cvif->beacon->data; | 
|  |  | 
|  | off = cvif->id * AR9170_MAC_BCN_LENGTH_MAX; | 
|  | addr = ar->fw.beacon_addr + off; | 
|  | len = roundup(skb->len + FCS_LEN, 4); | 
|  |  | 
|  | if ((off + len) > ar->fw.beacon_max_len) { | 
|  | if (net_ratelimit()) { | 
|  | wiphy_err(ar->hw->wiphy, "beacon does not " | 
|  | "fit into device memory!\n"); | 
|  | } | 
|  | err = -EINVAL; | 
|  | goto err_unlock; | 
|  | } | 
|  |  | 
|  | if (len > AR9170_MAC_BCN_LENGTH_MAX) { | 
|  | if (net_ratelimit()) { | 
|  | wiphy_err(ar->hw->wiphy, "no support for beacons " | 
|  | "bigger than %d (yours:%d).\n", | 
|  | AR9170_MAC_BCN_LENGTH_MAX, len); | 
|  | } | 
|  |  | 
|  | err = -EMSGSIZE; | 
|  | goto err_unlock; | 
|  | } | 
|  |  | 
|  | ht_rate = carl9170_tx_beacon_physet(ar, skb, &ht1, &plcp); | 
|  |  | 
|  | carl9170_async_regwrite_begin(ar); | 
|  | carl9170_async_regwrite(AR9170_MAC_REG_BCN_HT1, ht1); | 
|  | if (ht_rate) | 
|  | carl9170_async_regwrite(AR9170_MAC_REG_BCN_HT2, plcp); | 
|  | else | 
|  | carl9170_async_regwrite(AR9170_MAC_REG_BCN_PLCP, plcp); | 
|  |  | 
|  | for (i = 0; i < DIV_ROUND_UP(skb->len, 4); i++) { | 
|  | /* | 
|  | * XXX: This accesses beyond skb data for up | 
|  | *	to the last 3 bytes!! | 
|  | */ | 
|  |  | 
|  | if (old && (data[i] == old[i])) | 
|  | continue; | 
|  |  | 
|  | word = le32_to_cpu(data[i]); | 
|  | carl9170_async_regwrite(addr + 4 * i, word); | 
|  | } | 
|  | carl9170_async_regwrite_finish(); | 
|  |  | 
|  | dev_kfree_skb_any(cvif->beacon); | 
|  | cvif->beacon = NULL; | 
|  |  | 
|  | err = carl9170_async_regwrite_result(); | 
|  | if (!err) | 
|  | cvif->beacon = skb; | 
|  | spin_unlock_bh(&ar->beacon_lock); | 
|  | if (err) | 
|  | goto err_free; | 
|  |  | 
|  | if (submit) { | 
|  | err = carl9170_bcn_ctrl(ar, cvif->id, | 
|  | CARL9170_BCN_CTRL_CAB_TRIGGER, | 
|  | addr, skb->len + FCS_LEN); | 
|  |  | 
|  | if (err) | 
|  | goto err_free; | 
|  | } | 
|  | out_unlock: | 
|  | rcu_read_unlock(); | 
|  | return 0; | 
|  |  | 
|  | err_unlock: | 
|  | spin_unlock_bh(&ar->beacon_lock); | 
|  |  | 
|  | err_free: | 
|  | rcu_read_unlock(); | 
|  | dev_kfree_skb_any(skb); | 
|  | return err; | 
|  | } |