|  | /* | 
|  | * linux/drivers/pcmcia/pxa/pxa_cm_x255.c | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * Compulab Ltd., 2003, 2007, 2008 | 
|  | * Mike Rapoport <mike@compulab.co.il> | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/export.h> | 
|  |  | 
|  | #include "soc_common.h" | 
|  |  | 
|  | #define GPIO_PCMCIA_SKTSEL	(54) | 
|  | #define GPIO_PCMCIA_S0_CD_VALID	(16) | 
|  | #define GPIO_PCMCIA_S1_CD_VALID	(17) | 
|  | #define GPIO_PCMCIA_S0_RDYINT	(6) | 
|  | #define GPIO_PCMCIA_S1_RDYINT	(8) | 
|  | #define GPIO_PCMCIA_RESET	(9) | 
|  |  | 
|  | static int cmx255_pcmcia_hw_init(struct soc_pcmcia_socket *skt) | 
|  | { | 
|  | int ret = gpio_request(GPIO_PCMCIA_RESET, "PCCard reset"); | 
|  | if (ret) | 
|  | return ret; | 
|  | gpio_direction_output(GPIO_PCMCIA_RESET, 0); | 
|  |  | 
|  | if (skt->nr == 0) { | 
|  | skt->stat[SOC_STAT_CD].gpio = GPIO_PCMCIA_S0_CD_VALID; | 
|  | skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD"; | 
|  | skt->stat[SOC_STAT_RDY].gpio = GPIO_PCMCIA_S0_RDYINT; | 
|  | skt->stat[SOC_STAT_RDY].name = "PCMCIA0 RDY"; | 
|  | } else { | 
|  | skt->stat[SOC_STAT_CD].gpio = GPIO_PCMCIA_S1_CD_VALID; | 
|  | skt->stat[SOC_STAT_CD].name = "PCMCIA1 CD"; | 
|  | skt->stat[SOC_STAT_RDY].gpio = GPIO_PCMCIA_S1_RDYINT; | 
|  | skt->stat[SOC_STAT_RDY].name = "PCMCIA1 RDY"; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void cmx255_pcmcia_shutdown(struct soc_pcmcia_socket *skt) | 
|  | { | 
|  | gpio_free(GPIO_PCMCIA_RESET); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void cmx255_pcmcia_socket_state(struct soc_pcmcia_socket *skt, | 
|  | struct pcmcia_state *state) | 
|  | { | 
|  | state->vs_3v  = 0; | 
|  | state->vs_Xv  = 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int cmx255_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, | 
|  | const socket_state_t *state) | 
|  | { | 
|  | switch (skt->nr) { | 
|  | case 0: | 
|  | if (state->flags & SS_RESET) { | 
|  | gpio_set_value(GPIO_PCMCIA_SKTSEL, 0); | 
|  | udelay(1); | 
|  | gpio_set_value(GPIO_PCMCIA_RESET, 1); | 
|  | udelay(10); | 
|  | gpio_set_value(GPIO_PCMCIA_RESET, 0); | 
|  | } | 
|  | break; | 
|  | case 1: | 
|  | if (state->flags & SS_RESET) { | 
|  | gpio_set_value(GPIO_PCMCIA_SKTSEL, 1); | 
|  | udelay(1); | 
|  | gpio_set_value(GPIO_PCMCIA_RESET, 1); | 
|  | udelay(10); | 
|  | gpio_set_value(GPIO_PCMCIA_RESET, 0); | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct pcmcia_low_level cmx255_pcmcia_ops __initdata = { | 
|  | .owner			= THIS_MODULE, | 
|  | .hw_init		= cmx255_pcmcia_hw_init, | 
|  | .hw_shutdown		= cmx255_pcmcia_shutdown, | 
|  | .socket_state		= cmx255_pcmcia_socket_state, | 
|  | .configure_socket	= cmx255_pcmcia_configure_socket, | 
|  | .nr			= 1, | 
|  | }; | 
|  |  | 
|  | static struct platform_device *cmx255_pcmcia_device; | 
|  |  | 
|  | int __init cmx255_pcmcia_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | cmx255_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); | 
|  |  | 
|  | if (!cmx255_pcmcia_device) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret = platform_device_add_data(cmx255_pcmcia_device, &cmx255_pcmcia_ops, | 
|  | sizeof(cmx255_pcmcia_ops)); | 
|  |  | 
|  | if (ret == 0) { | 
|  | printk(KERN_INFO "Registering cm-x255 PCMCIA interface.\n"); | 
|  | ret = platform_device_add(cmx255_pcmcia_device); | 
|  | } | 
|  |  | 
|  | if (ret) | 
|  | platform_device_put(cmx255_pcmcia_device); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void __exit cmx255_pcmcia_exit(void) | 
|  | { | 
|  | platform_device_unregister(cmx255_pcmcia_device); | 
|  | } |