FreeRTOS/Demo/RL78_multiple_IAR/RTOSDemo.ewd

<?xml version="1.0" encoding="iso-8859-1"?>

<project>
  <fileVersion>2</fileVersion>
  <configuration>
    <name>YRPBRL78G13</name>
    <toolchain>
      <name>RL78</name>
    </toolchain>
    <debug>1</debug>
    <settings>
      <name>C-SPY</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>DebugMandatory</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugInput</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugProcessorVariant</name>
          <state>0</state>
        </option>
        <option>
          <name>DebuggerNearConstLocation</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugRunToEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugRunToName</name>
          <state>main</state>
        </option>
        <option>
          <name>DebugMacOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugMacFile</name>
          <state></state>
        </option>
        <option>
          <name>DynDriver</name>
          <state>TKRL78</state>
        </option>
        <option>
          <name>DebugDDFOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugDDFFile</name>
          <state>$TOOLKIT_DIR$\config\debugger\ior5f100le.ddf</state>
        </option>
        <option>
          <name>DebugCUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck1</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath1</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck2</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath2</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck3</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath3</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset1</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset2</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset3</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesUse1</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesUse2</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesUse3</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>E1RL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>1</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>E1Mandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>E1SuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E1VerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E1LogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>E1DoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>E1AttachProgram</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>E20RL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>1</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>E20Mandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>E20SuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E20VerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E20LogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>E20DoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>E20AttachProgram</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>IECRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IecMandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>IecSuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>IecVerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>IecLogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>IecDoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>IecSupExchAdapter</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>SIMRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>SimMandatory</name>
          <state>1</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>TKRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>TKMandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>TKSuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>TKVerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>TKLogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>TKDoLogfile</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <debuggerPlugins>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
        <loadFlag>1</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
        <loadFlag>1</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
    </debuggerPlugins>
  </configuration>
  <configuration>
    <name>YRDKRL78G14</name>
    <toolchain>
      <name>RL78</name>
    </toolchain>
    <debug>1</debug>
    <settings>
      <name>C-SPY</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>DebugMandatory</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugInput</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugProcessorVariant</name>
          <state>0</state>
        </option>
        <option>
          <name>DebuggerNearConstLocation</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugRunToEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugRunToName</name>
          <state>main</state>
        </option>
        <option>
          <name>DebugMacOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugMacFile</name>
          <state></state>
        </option>
        <option>
          <name>DynDriver</name>
          <state>SIMRL78</state>
        </option>
        <option>
          <name>DebugDDFOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugDDFFile</name>
          <state>$TOOLKIT_DIR$\config\debugger\ior5f104pj.ddf</state>
        </option>
        <option>
          <name>DebugCUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck1</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath1</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck2</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath2</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck3</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath3</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset1</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset2</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset3</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesUse1</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesUse2</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesUse3</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>E1RL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>1</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>E1Mandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>E1SuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E1VerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E1LogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>E1DoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>E1AttachProgram</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>E20RL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>1</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>E20Mandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>E20SuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E20VerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E20LogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>E20DoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>E20AttachProgram</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>IECRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IecMandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>IecSuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>IecVerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>IecLogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>IecDoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>IecSupExchAdapter</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>SIMRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>SimMandatory</name>
          <state>1</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>TKRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>TKMandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>TKSuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>TKVerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>TKLogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>TKDoLogfile</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <debuggerPlugins>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
        <loadFlag>1</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
        <loadFlag>1</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
    </debuggerPlugins>
  </configuration>
  <configuration>
    <name>RSKRL78G1C</name>
    <toolchain>
      <name>RL78</name>
    </toolchain>
    <debug>1</debug>
    <settings>
      <name>C-SPY</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>DebugMandatory</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugInput</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugProcessorVariant</name>
          <state>0</state>
        </option>
        <option>
          <name>DebuggerNearConstLocation</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugRunToEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugRunToName</name>
          <state>main</state>
        </option>
        <option>
          <name>DebugMacOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugMacFile</name>
          <state></state>
        </option>
        <option>
          <name>DynDriver</name>
          <state>E1RL78</state>
        </option>
        <option>
          <name>DebugDDFOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugDDFFile</name>
          <state>$TOOLKIT_DIR$\config\debugger\ior5f10jgc.ddf</state>
        </option>
        <option>
          <name>DebugCUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck1</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath1</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck2</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath2</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck3</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath3</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset1</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset2</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset3</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesUse1</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesUse2</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesUse3</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>E1RL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>1</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>E1Mandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>E1SuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E1VerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E1LogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>E1DoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>E1AttachProgram</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>E20RL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>1</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>E20Mandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>E20SuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E20VerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E20LogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>E20DoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>E20AttachProgram</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>IECRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IecMandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>IecSuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>IecVerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>IecLogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>IecDoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>IecSupExchAdapter</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>SIMRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>SimMandatory</name>
          <state>1</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>TKRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>TKMandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>TKSuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>TKVerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>TKLogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>TKDoLogfile</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <debuggerPlugins>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
        <loadFlag>1</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
        <loadFlag>1</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
    </debuggerPlugins>
  </configuration>
  <configuration>
    <name>RSKRL78L13</name>
    <toolchain>
      <name>RL78</name>
    </toolchain>
    <debug>1</debug>
    <settings>
      <name>C-SPY</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>DebugMandatory</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugInput</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugProcessorVariant</name>
          <state>0</state>
        </option>
        <option>
          <name>DebuggerNearConstLocation</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugRunToEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugRunToName</name>
          <state>main</state>
        </option>
        <option>
          <name>DebugMacOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugMacFile</name>
          <state></state>
        </option>
        <option>
          <name>DynDriver</name>
          <state>SIMRL78</state>
        </option>
        <option>
          <name>DebugDDFOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugDDFFile</name>
          <state>$TOOLKIT_DIR$\config\debugger\ior5f10wmg.ddf</state>
        </option>
        <option>
          <name>DebugCUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck1</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath1</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck2</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath2</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck3</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath3</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset1</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset2</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset3</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesUse1</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesUse2</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesUse3</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>E1RL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>1</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>E1Mandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>E1SuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E1VerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E1LogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>E1DoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>E1AttachProgram</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>E20RL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>1</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>E20Mandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>E20SuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E20VerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E20LogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>E20DoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>E20AttachProgram</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>IECRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IecMandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>IecSuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>IecVerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>IecLogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>IecDoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>IecSupExchAdapter</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>SIMRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>SimMandatory</name>
          <state>1</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>TKRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>TKMandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>TKSuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>TKVerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>TKLogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>TKDoLogfile</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <debuggerPlugins>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
        <loadFlag>1</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
        <loadFlag>1</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
    </debuggerPlugins>
  </configuration>
  <configuration>
    <name>RL78_G1A_TB</name>
    <toolchain>
      <name>RL78</name>
    </toolchain>
    <debug>1</debug>
    <settings>
      <name>C-SPY</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>DebugMandatory</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugInput</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugProcessorVariant</name>
          <state>0</state>
        </option>
        <option>
          <name>DebuggerNearConstLocation</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugRunToEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugRunToName</name>
          <state>main</state>
        </option>
        <option>
          <name>DebugMacOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugMacFile</name>
          <state></state>
        </option>
        <option>
          <name>DynDriver</name>
          <state>E1RL78</state>
        </option>
        <option>
          <name>DebugDDFOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugDDFFile</name>
          <state>$TOOLKIT_DIR$\config\debugger\ior5f10ele.ddf</state>
        </option>
        <option>
          <name>DebugCUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck1</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath1</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck2</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath2</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck3</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath3</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset1</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset2</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset3</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesUse1</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesUse2</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesUse3</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>E1RL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>1</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>E1Mandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>E1SuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E1VerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E1LogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>E1DoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>E1AttachProgram</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>E20RL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>1</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>E20Mandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>E20SuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E20VerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E20LogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>E20DoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>E20AttachProgram</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>IECRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IecMandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>IecSuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>IecVerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>IecLogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>IecDoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>IecSupExchAdapter</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>SIMRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>SimMandatory</name>
          <state>1</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>TKRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>TKMandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>TKSuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>TKVerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>TKLogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>TKDoLogfile</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <debuggerPlugins>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
        <loadFlag>1</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
        <loadFlag>1</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
    </debuggerPlugins>
  </configuration>
  <configuration>
    <name>RSKRL78L1C</name>
    <toolchain>
      <name>RL78</name>
    </toolchain>
    <debug>1</debug>
    <settings>
      <name>C-SPY</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>DebugMandatory</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugInput</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugProcessorVariant</name>
          <state>0</state>
        </option>
        <option>
          <name>DebuggerNearConstLocation</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugRunToEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>DebugRunToName</name>
          <state>main</state>
        </option>
        <option>
          <name>DebugMacOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugMacFile</name>
          <state></state>
        </option>
        <option>
          <name>DynDriver</name>
          <state>E1RL78</state>
        </option>
        <option>
          <name>DebugDDFOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugDDFFile</name>
          <state>$TOOLKIT_DIR$\config\debugger\ior5f110pj.ddf</state>
        </option>
        <option>
          <name>DebugCUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck1</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath1</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck2</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath2</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesSuppressCheck3</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesPath3</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset1</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset2</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesOffset3</name>
          <state></state>
        </option>
        <option>
          <name>DebugImagesUse1</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesUse2</name>
          <state>0</state>
        </option>
        <option>
          <name>DebugImagesUse3</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>E1RL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>1</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>E1Mandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>E1SuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E1VerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E1LogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>E1DoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>E1AttachProgram</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>E20RL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>1</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>E20Mandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>E20SuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E20VerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>E20LogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>E20DoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>E20AttachProgram</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>IECRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IecMandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>IecSuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>IecVerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>IecLogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>IecDoLogfile</name>
          <state>0</state>
        </option>
        <option>
          <name>IecSupExchAdapter</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>SIMRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>SimMandatory</name>
          <state>1</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>TKRL78</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>TKMandatory</name>
          <state>0</state>
        </option>
        <option>
          <name>TKSuppressLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>TKVerifyLoad</name>
          <state>0</state>
        </option>
        <option>
          <name>TKLogFile</name>
          <state>$PROJ_DIR$\cspycomm.log</state>
        </option>
        <option>
          <name>TKDoLogfile</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <debuggerPlugins>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
        <loadFlag>1</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
        <loadFlag>1</loadFlag>
      </plugin>
      <plugin>
        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
        <loadFlag>0</loadFlag>
      </plugin>
    </debuggerPlugins>
  </configuration>
</project>