build-toolchain.sh

#! /usr/bin/env bash
# Copyright (c) 2011-2015, ARM Limited
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
#     * Redistributions of source code must retain the above copyright notice,
#       this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#     * Neither the name of Arm nor the names of its contributors may be used
#       to endorse or promote products derived from this software without
#       specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.

set -e
set -x
set -u
set -o pipefail

umask 022

exec < /dev/null

script_path=`cd $(dirname $0) && pwd -P`
. $script_path/build-common.sh

# This file contains the sequence of commands used to build the
# GNU Tools Arm Embedded toolchain.
usage ()
{
cat<<EOF
Usage: $0 [--build_type=...] [--skip_steps=...]

This script will build GNU Tools Arm Embedded toolchain.

OPTIONS:
  --build_type=TYPE     specify build type to either ppa or native.
                        If followed by keyword debug, the produced binaries
                        will be debuggable.  The default case will be
                        non-debug native build.

                        Example usages are as:
                        --build_type=native
                        --build_type=ppa
                        --build_type=native,debug
                        --build_type=ppa,debug

  --skip_steps=STEPS    specify which build steps you want to skip.  Concatenate
                        them with comma for skipping more than one steps.  Available
                        steps are: gdb-with-python, mingw32, mingw32-gdb-with-python
                        and manual.

  --threads=PROVIDER    specify the threading and synchronization provider.
                        Supported providers:
                        --threads=no     # Single-threaded mode (the default)
                        --threads=posix  # Posix threads and clocks, aka pthreads
EOF
}

if [ $# -gt 3 ] ; then
    usage
fi

skip_mingw32=no
DEBUG_BUILD_OPTIONS=
is_ppa_release=no
is_native_build=yes
skip_manual=no
skip_steps=
skip_gdb_with_python=no
skip_mingw32_gdb_with_python=no
build_type=
threads=

MULTILIB_LIST="--with-multilib-list=rmprofile"
POSIX_THREADS=("--enable-threads=posix" "--enable-tls" "--enable-libstdcxx-time=notimer")
NO_THREADS=("--disable-threads" "--disable_tls")

for ac_arg; do
    case $ac_arg in
      --skip_steps=*)
	      skip_steps=`echo $ac_arg | sed -e "s/--skip_steps=//g" -e "s/,/ /g"`
	      ;;
      --build_type=*)
	      build_type=`echo $ac_arg | sed -e "s/--build_type=//g" -e "s/,/ /g"`
	      ;;
      --threads=*)
	      threads=`echo $ac_arg | sed -e "s/--threads=//g" -e "s/,/ /g"`
	      ;;
      *)
        usage
        exit 1
        ;;
    esac
done

if [ "x$build_type" != "x" ]; then
  for bt in $build_type; do
    case $bt in
      ppa)
        is_ppa_release=yes
        is_native_build=no
        skip_gdb_with_python=yes
        ;;
      native)
        is_native_build=yes
        is_ppa_release=no
        ;;
      debug)
        DEBUG_BUILD_OPTIONS=" -O0 -g "
        ;;
      *)
        echo "Unknown build type: $bt" 1>&2
        usage
        exit 1
        ;;
    esac
  done
else
  is_ppa_release=no
  is_native_build=yes
fi

if [ "x$skip_steps" != "x" ]; then
	for ss in $skip_steps; do
		case $ss in
		    manual)
                      skip_manual=yes
                      ;;
		    gdb-with-python)
                      skip_gdb_with_python=yes
                      ;;
	            mingw32)
                      skip_mingw32=yes
                      skip_mingw32_gdb_with_python=yes
                      ;;
                    mingw32-gdb-with-python)
                      skip_mingw32_gdb_with_python=yes
                      ;;
                    *)
                      echo "Unknown build steps: $ss" 1>&2
                      usage
                      exit 1
                      ;;
		esac
	done
fi

if [ "x$threads" != "x" ]; then
  case $threads in
    posix|pthreads)
      THREAD_ARGUMENTS=("${POSIX_THREADS[@]}")
      ;;
    no|none|single)
      THREAD_ARGUMENTS=("${NO_THREADS[@]}")
      ;;
    *)
      echo "Unknown threads type: $threads" 1>&2
      usage
      exit 1
      ;;
  esac
else
  THREAD_ARGUMENTS=("${NO_THREADS[@]}")
fi

if [ "x$BUILD" == "xx86_64-apple-darwin10" ] || [ "x$is_ppa_release" == "xyes" ]; then
    skip_mingw32=yes
    skip_mingw32_gdb_with_python=yes
fi

#Building mingw gdb with python support requires python windows package and
#a special config file. If any of them is missing, we skip the build of
#mingw gdb with python support.
if [ ! -d $SRCDIR/$PYTHON_WIN ] \
     || [ ! -x $script_path/python-config.sh ]; then
    skip_mingw32_gdb_with_python=yes
fi

if [ "x$is_ppa_release" != "xyes" ]; then
  ENV_CFLAGS=" -I$BUILDDIR_NATIVE/host-libs/zlib/include -O2 "
  ENV_CPPFLAGS=" -I$BUILDDIR_NATIVE/host-libs/zlib/include "
  ENV_LDFLAGS=" -L$BUILDDIR_NATIVE/host-libs/zlib/lib
                -L$BUILDDIR_NATIVE/host-libs/usr/lib "

  if [ -d $SRCDIR/$PYTHON_WIN ]; then
    ENV_LDFLAGS+=" -L$SRCDIR/$PYTHON_WIN/lib "
  fi

  GCC_CONFIG_OPTS=" --build=$BUILD --host=$HOST_NATIVE
                    --with-gmp=$BUILDDIR_NATIVE/host-libs/usr
                    --with-mpfr=$BUILDDIR_NATIVE/host-libs/usr
                    --with-mpc=$BUILDDIR_NATIVE/host-libs/usr
                    --with-isl=$BUILDDIR_NATIVE/host-libs/usr
                    --with-libelf=$BUILDDIR_NATIVE/host-libs/usr "

  BINUTILS_CONFIG_OPTS=" --build=$BUILD --host=$HOST_NATIVE "

  NEWLIB_CONFIG_OPTS=" --build=$BUILD --host=$HOST_NATIVE "

  GDB_CONFIG_OPTS=" --build=$BUILD --host=$HOST_NATIVE
                    --with-libexpat-prefix=$BUILDDIR_NATIVE/host-libs/usr "
fi

mkdir -p $BUILDDIR_NATIVE
rm -rf $INSTALLDIR_NATIVE && mkdir -p $INSTALLDIR_NATIVE
if [ "x$skip_mingw32" != "xyes" ] ; then
mkdir -p $BUILDDIR_MINGW
rm -rf $INSTALLDIR_MINGW && mkdir -p $INSTALLDIR_MINGW
fi
rm -rf $PACKAGEDIR && mkdir -p $PACKAGEDIR

cd $SRCDIR

echo Task [III-00] Update Timestamps

(cd $SRCDIR/$GCC && contrib/gcc_update --touch)

echo Task [III-0] /$HOST_NATIVE/binutils/
rm -rf $BUILDDIR_NATIVE/binutils && mkdir -p $BUILDDIR_NATIVE/binutils
pushd $BUILDDIR_NATIVE/binutils
saveenv
saveenvvar CFLAGS "$ENV_CFLAGS"
saveenvvar CPPFLAGS "$ENV_CPPFLAGS"
saveenvvar LDFLAGS "$ENV_LDFLAGS"
$SRCDIR/$BINUTILS/configure  \
    ${BINUTILS_CONFIG_OPTS} \
    --target=$TARGET \
    --prefix=$INSTALLDIR_NATIVE \
    --infodir=$INSTALLDIR_NATIVE_DOC/info \
    --mandir=$INSTALLDIR_NATIVE_DOC/man \
    --htmldir=$INSTALLDIR_NATIVE_DOC/html \
    --pdfdir=$INSTALLDIR_NATIVE_DOC/pdf \
    --disable-nls \
    --disable-werror \
    --disable-sim \
    --disable-gdb \
    --enable-interwork \
    --enable-plugins \
    --with-sysroot=$INSTALLDIR_NATIVE/arm-none-eabi \
    "--with-pkgversion=$PKGVERSION"

if [ "x$DEBUG_BUILD_OPTIONS" != "x" ] ; then
    make CFLAGS="-I$BUILDDIR_NATIVE/host-libs/zlib/include $DEBUG_BUILD_OPTIONS" -j$JOBS
else
    make -j$JOBS
fi

make install

if [ "x$skip_manual" != "xyes" ]; then
	make install-html install-pdf
fi

copy_dir $INSTALLDIR_NATIVE $BUILDDIR_NATIVE/target-libs
restoreenv
popd

pushd $INSTALLDIR_NATIVE
rm -rf ./lib
popd

echo Task [III-1] /$HOST_NATIVE/gcc-first/
rm -rf $BUILDDIR_NATIVE/gcc-first && mkdir -p $BUILDDIR_NATIVE/gcc-first
pushd $BUILDDIR_NATIVE/gcc-first
$SRCDIR/$GCC/configure --target=$TARGET \
    --prefix=$INSTALLDIR_NATIVE \
    --libexecdir=$INSTALLDIR_NATIVE/lib \
    --infodir=$INSTALLDIR_NATIVE_DOC/info \
    --mandir=$INSTALLDIR_NATIVE_DOC/man \
    --htmldir=$INSTALLDIR_NATIVE_DOC/html \
    --pdfdir=$INSTALLDIR_NATIVE_DOC/pdf \
    --enable-languages=c \
    --disable-decimal-float \
    --disable-libffi \
    --disable-libgomp \
    --disable-libmudflap \
    --disable-libquadmath \
    --disable-libssp \
    --disable-libstdcxx-pch \
    --disable-nls \
    --disable-shared \
    "${THREAD_ARGUMENTS[@]}" \
    --with-newlib \
    --without-headers \
    --with-gnu-as \
    --with-gnu-ld \
    --with-python-dir=share/gcc-arm-none-eabi \
    --with-sysroot=$INSTALLDIR_NATIVE/arm-none-eabi \
    ${GCC_CONFIG_OPTS}                              \
    "${GCC_CONFIG_OPTS_LCPP}"                              \
    "--with-pkgversion=$PKGVERSION" \
    ${MULTILIB_LIST}

make -j$JOBS all-gcc

make install-gcc

popd

pushd $INSTALLDIR_NATIVE
rm -rf bin/arm-none-eabi-gccbug
rm -rf ./lib/libiberty.a
rm -rf  include
popd

echo Task [III-2] /$HOST_NATIVE/newlib/
saveenv
prepend_path PATH $INSTALLDIR_NATIVE/bin
saveenvvar CFLAGS_FOR_TARGET '-g -O2 -ffunction-sections -fdata-sections'
rm -rf $BUILDDIR_NATIVE/newlib && mkdir -p $BUILDDIR_NATIVE/newlib
pushd $BUILDDIR_NATIVE/newlib

$SRCDIR/$NEWLIB/configure  \
    $NEWLIB_CONFIG_OPTS \
    --target=$TARGET \
    --prefix=$INSTALLDIR_NATIVE \
    --infodir=$INSTALLDIR_NATIVE_DOC/info \
    --mandir=$INSTALLDIR_NATIVE_DOC/man \
    --htmldir=$INSTALLDIR_NATIVE_DOC/html \
    --pdfdir=$INSTALLDIR_NATIVE_DOC/pdf \
    --enable-newlib-io-long-long \
    --enable-newlib-register-fini \
    --enable-newlib-retargetable-locking \
    --disable-newlib-supplied-syscalls \
    --disable-nls

make -j$JOBS

make install

if [ "x$skip_manual" != "xyes" ]; then
make pdf
mkdir -p $INSTALLDIR_NATIVE_DOC/pdf
cp $BUILDDIR_NATIVE/newlib/arm-none-eabi/newlib/libc/libc.pdf $INSTALLDIR_NATIVE_DOC/pdf/libc.pdf
cp $BUILDDIR_NATIVE/newlib/arm-none-eabi/newlib/libm/libm.pdf $INSTALLDIR_NATIVE_DOC/pdf/libm.pdf

make html
mkdir -p $INSTALLDIR_NATIVE_DOC/html
copy_dir $BUILDDIR_NATIVE/newlib/arm-none-eabi/newlib/libc/libc.html $INSTALLDIR_NATIVE_DOC/html/libc
copy_dir $BUILDDIR_NATIVE/newlib/arm-none-eabi/newlib/libm/libm.html $INSTALLDIR_NATIVE_DOC/html/libm
fi

popd
restoreenv

echo Task [III-3] /$HOST_NATIVE/newlib-nano/
saveenv
prepend_path PATH $INSTALLDIR_NATIVE/bin
saveenvvar CFLAGS_FOR_TARGET '-g -Os -ffunction-sections -fdata-sections'
rm -rf $BUILDDIR_NATIVE/newlib-nano && mkdir -p $BUILDDIR_NATIVE/newlib-nano
pushd $BUILDDIR_NATIVE/newlib-nano

$SRCDIR/$NEWLIB_NANO/configure  \
    $NEWLIB_CONFIG_OPTS \
    --target=$TARGET \
    --prefix=$BUILDDIR_NATIVE/target-libs \
    --disable-newlib-supplied-syscalls    \
    --enable-newlib-reent-small           \
    --disable-newlib-fvwrite-in-streamio  \
    --disable-newlib-fseek-optimization   \
    --disable-newlib-wide-orient          \
    --enable-newlib-nano-malloc           \
    --disable-newlib-unbuf-stream-opt     \
    --enable-lite-exit                    \
    --enable-newlib-global-atexit         \
    --enable-newlib-nano-formatted-io     \
    --disable-nls

make -j$JOBS
make install

popd
restoreenv

echo Task [III-4] /$HOST_NATIVE/gcc-final/
rm -f $INSTALLDIR_NATIVE/arm-none-eabi/usr
ln -s . $INSTALLDIR_NATIVE/arm-none-eabi/usr

rm -rf $BUILDDIR_NATIVE/gcc-final && mkdir -p $BUILDDIR_NATIVE/gcc-final
pushd $BUILDDIR_NATIVE/gcc-final

$SRCDIR/$GCC/configure --target=$TARGET \
    --prefix=$INSTALLDIR_NATIVE \
    --libexecdir=$INSTALLDIR_NATIVE/lib \
    --infodir=$INSTALLDIR_NATIVE_DOC/info \
    --mandir=$INSTALLDIR_NATIVE_DOC/man \
    --htmldir=$INSTALLDIR_NATIVE_DOC/html \
    --pdfdir=$INSTALLDIR_NATIVE_DOC/pdf \
    --enable-languages=c,c++ \
    --enable-plugins \
    --disable-decimal-float \
    --disable-libffi \
    --disable-libgomp \
    --disable-libmudflap \
    --disable-libquadmath \
    --disable-libssp \
    --disable-libstdcxx-pch \
    --disable-nls \
    --disable-shared \
    "${THREAD_ARGUMENTS[@]}" \
    --with-gnu-as \
    --with-gnu-ld \
    --with-newlib \
    --with-headers=yes \
    --with-python-dir=share/gcc-arm-none-eabi \
    --with-sysroot=$INSTALLDIR_NATIVE/arm-none-eabi \
    $GCC_CONFIG_OPTS                                \
    "${GCC_CONFIG_OPTS_LCPP}"                              \
    "--with-pkgversion=$PKGVERSION" \
    ${MULTILIB_LIST}

# Passing USE_TM_CLONE_REGISTRY=0 via INHIBIT_LIBC_CFLAGS to disable
# transactional memory related code in crtbegin.o.
# This is a workaround. Better approach is have a t-* to set this flag via
# CRTSTUFF_T_CFLAGS
if [ "x$DEBUG_BUILD_OPTIONS" != "x" ]; then
  make -j$JOBS CXXFLAGS="$DEBUG_BUILD_OPTIONS" \
	       INHIBIT_LIBC_CFLAGS="-DUSE_TM_CLONE_REGISTRY=0"
else
  make -j$JOBS INHIBIT_LIBC_CFLAGS="-DUSE_TM_CLONE_REGISTRY=0"
fi

make install

if [ "x$skip_manual" != "xyes" ]; then
	make install-html install-pdf
fi

pushd $INSTALLDIR_NATIVE
rm -rf bin/arm-none-eabi-gccbug
LIBIBERTY_LIBRARIES=`find $INSTALLDIR_NATIVE/arm-none-eabi/lib -name libiberty.a`
for libiberty_lib in $LIBIBERTY_LIBRARIES ; do
    rm -rf $libiberty_lib
done
rm -rf ./lib/libiberty.a
rm -rf  include
popd

rm -f $INSTALLDIR_NATIVE/arm-none-eabi/usr
popd

echo Task [III-5] /$HOST_NATIVE/gcc-size-libstdcxx/
rm -f $BUILDDIR_NATIVE/target-libs/arm-none-eabi/usr
ln -s . $BUILDDIR_NATIVE/target-libs/arm-none-eabi/usr

rm -rf $BUILDDIR_NATIVE/gcc-size-libstdcxx && mkdir -p $BUILDDIR_NATIVE/gcc-size-libstdcxx
pushd $BUILDDIR_NATIVE/gcc-size-libstdcxx

$SRCDIR/$GCC/configure --target=$TARGET \
    --prefix=$BUILDDIR_NATIVE/target-libs \
    --enable-languages=c,c++ \
    --disable-decimal-float \
    --disable-libffi \
    --disable-libgomp \
    --disable-libmudflap \
    --disable-libquadmath \
    --disable-libssp \
    --disable-libstdcxx-pch \
    --disable-libstdcxx-verbose \
    --disable-nls \
    --disable-shared \
    "${THREAD_ARGUMENTS[@]}" \
    --with-gnu-as \
    --with-gnu-ld \
    --with-newlib \
    --with-headers=yes \
    --with-python-dir=share/gcc-arm-none-eabi \
    --with-sysroot=$BUILDDIR_NATIVE/target-libs/arm-none-eabi \
    $GCC_CONFIG_OPTS \
    "${GCC_CONFIG_OPTS_LCPP}"                              \
    "--with-pkgversion=$PKGVERSION" \
    ${MULTILIB_LIST}

make -j$JOBS CXXFLAGS_FOR_TARGET="-g -Os -ffunction-sections -fdata-sections -fno-exceptions"
make install

copy_multi_libs src_prefix="$BUILDDIR_NATIVE/target-libs/arm-none-eabi/lib" \
                dst_prefix="$INSTALLDIR_NATIVE/arm-none-eabi/lib"           \
                target_gcc="$BUILDDIR_NATIVE/target-libs/bin/arm-none-eabi-gcc"

# Copy the nano configured newlib.h file into the location that nano.specs
# expects it to be.
mkdir -p $INSTALLDIR_NATIVE/arm-none-eabi/include/newlib-nano
cp -f $BUILDDIR_NATIVE/target-libs/arm-none-eabi/include/newlib.h \
      $INSTALLDIR_NATIVE/arm-none-eabi/include/newlib-nano/newlib.h

popd

echo Task [III-6] /$HOST_NATIVE/gdb/
build_gdb()
{
	GDB_EXTRA_CONFIG_OPTS=$1

	rm -rf $BUILDDIR_NATIVE/gdb && mkdir -p $BUILDDIR_NATIVE/gdb
	pushd $BUILDDIR_NATIVE/gdb
	saveenv
	saveenvvar CFLAGS "$ENV_CFLAGS"
	saveenvvar CPPFLAGS "$ENV_CPPFLAGS"
	saveenvvar LDFLAGS "$ENV_LDFLAGS"

	$SRCDIR/$GDB/configure  \
	    --target=$TARGET \
	    --prefix=$INSTALLDIR_NATIVE \
	    --infodir=$INSTALLDIR_NATIVE_DOC/info \
	    --mandir=$INSTALLDIR_NATIVE_DOC/man \
	    --htmldir=$INSTALLDIR_NATIVE_DOC/html \
	    --pdfdir=$INSTALLDIR_NATIVE_DOC/pdf \
	    --disable-nls \
	    --disable-sim \
	    --disable-gas \
	    --disable-binutils \
	    --disable-ld \
	    --disable-gprof \
	    --with-libexpat \
	    --with-lzma=no \
	    --with-system-gdbinit=$INSTALLDIR_NATIVE/$HOST_NATIVE/arm-none-eabi/lib/gdbinit \
	    $GDB_CONFIG_OPTS \
	    $GDB_EXTRA_CONFIG_OPTS \
	    '--with-gdb-datadir='\''${prefix}'\''/arm-none-eabi/share/gdb' \
	    "--with-pkgversion=$PKGVERSION"

	if [ "x$DEBUG_BUILD_OPTIONS" != "x" ] ; then
	    make CFLAGS="-I$BUILDDIR_NATIVE/host-libs/zlib/include $DEBUG_BUILD_OPTIONS" -j$JOBS
	else
	    make -j$JOBS
	fi

	make install

	if [ "x$skip_manual" != "xyes" ]; then
		make install-html install-pdf
	fi

	restoreenv
	popd
}


#Always enable python support in GDB for PPA build.
if [ "x$is_ppa_release" == "xyes" ]; then
	build_gdb "--with-python=yes"
else
        #First we build GDB without python support.
	build_gdb "--with-python=no"

	#Then build gdb with python support.
	if [ "x$skip_gdb_with_python" == "xno" ]; then
		build_gdb "--with-python=yes --program-prefix=$TARGET-  --program-suffix=-py"
	fi
fi

if [ "x$is_ppa_release" != "xyes" -a "x$skip_manual" != "xyes" ]; then
echo TASK [III-7] /$HOST_NATIVE/build-manual
rm -rf $BUILDDIR_NATIVE/build-manual && mkdir -p $BUILDDIR_NATIVE/build-manual
pushd $BUILDDIR_NATIVE/build-manual
cp -r $SRCDIR/$BUILD_MANUAL/* .
echo "@set VERSION_PACKAGE ($PKGVERSION)" > version.texi
echo "@set CURRENT_YEAR  $release_year" >> version.texi
echo "@set CURRENT_MONTH $release_month" >> version.texi
echo "@set PKG_NAME $PACKAGE_NAME" >> version.texi
make clean
make
rm -rf $ROOT/How-to-build-toolchain.pdf
cp How-to-build-toolchain.pdf $ROOT
popd
fi

echo Task [III-8] /$HOST_NATIVE/pretidy/
rm -rf $INSTALLDIR_NATIVE/lib/libiberty.a
find $INSTALLDIR_NATIVE -name '*.la' -exec rm '{}' ';'

echo Task [III-9] /$HOST_NATIVE/strip_host_objects/
if [ "x$DEBUG_BUILD_OPTIONS" = "x" ] ; then
    STRIP_BINARIES=`find $INSTALLDIR_NATIVE/bin/ -name arm-none-eabi-\*`
    for bin in $STRIP_BINARIES ; do
        strip_binary strip $bin
    done

    STRIP_BINARIES=`find $INSTALLDIR_NATIVE/arm-none-eabi/bin/ -maxdepth 1 -mindepth 1 -name \*`
    for bin in $STRIP_BINARIES ; do
        strip_binary strip $bin
    done

    if [ "x$BUILD" == "xx86_64-apple-darwin10" ]; then
        STRIP_BINARIES=`find $INSTALLDIR_NATIVE/lib/gcc/arm-none-eabi/$GCC_VER/ -maxdepth 1 -name \* -perm +111 -and ! -type d`
    else
        STRIP_BINARIES=`find $INSTALLDIR_NATIVE/lib/gcc/arm-none-eabi/$GCC_VER/ -maxdepth 1 -name \* -perm /111 -and ! -type d`
    fi
    for bin in $STRIP_BINARIES ; do
        strip_binary strip $bin
    done
fi

echo Task [III-10] /$HOST_NATIVE/strip_target_objects/
saveenv
prepend_path PATH $INSTALLDIR_NATIVE/bin
TARGET_LIBRARIES=`find $INSTALLDIR_NATIVE/arm-none-eabi/lib -name \*.a`
for target_lib in $TARGET_LIBRARIES ; do
    arm-none-eabi-objcopy -R .comment -R .note -R .debug_info -R .debug_aranges -R .debug_pubnames -R .debug_pubtypes -R .debug_abbrev -R .debug_line -R .debug_str -R .debug_ranges -R .debug_loc $target_lib || true
done

TARGET_OBJECTS=`find $INSTALLDIR_NATIVE/arm-none-eabi/lib -name \*.o`
for target_obj in $TARGET_OBJECTS ; do
    arm-none-eabi-objcopy -R .comment -R .note -R .debug_info -R .debug_aranges -R .debug_pubnames -R .debug_pubtypes -R .debug_abbrev -R .debug_line -R .debug_str -R .debug_ranges -R .debug_loc $target_obj || true
done

TARGET_LIBRARIES=`find $INSTALLDIR_NATIVE/lib/gcc/arm-none-eabi/$GCC_VER -name \*.a`
for target_lib in $TARGET_LIBRARIES ; do
    arm-none-eabi-objcopy -R .comment -R .note -R .debug_info -R .debug_aranges -R .debug_pubnames -R .debug_pubtypes -R .debug_abbrev -R .debug_line -R .debug_str -R .debug_ranges -R .debug_loc $target_lib || true
done

TARGET_OBJECTS=`find $INSTALLDIR_NATIVE/lib/gcc/arm-none-eabi/$GCC_VER -name \*.o`
for target_obj in $TARGET_OBJECTS ; do
    arm-none-eabi-objcopy -R .comment -R .note -R .debug_info -R .debug_aranges -R .debug_pubnames -R .debug_pubtypes -R .debug_abbrev -R .debug_line -R .debug_str -R .debug_ranges -R .debug_loc $target_obj || true
done
restoreenv

# PPA release needn't following steps, so we exit here.
if [ "x$is_ppa_release" == "xyes" ] ; then
  exit 0
fi

echo Task [III-11] /$HOST_NATIVE/package_tbz2/

# Copy release.txt, readme.txt and license.txt into share.
cp $ROOT/$RELEASE_FILE $INSTALLDIR_NATIVE_DOC/
cp $ROOT/$README_FILE $INSTALLDIR_NATIVE_DOC/
cp $ROOT/$LICENSE_FILE $INSTALLDIR_NATIVE_DOC/

# Copy the samples from src to make the final package.
copy_dir_clean $SRCDIR/$SAMPLES $INSTALLDIR_NATIVE/share/gcc-arm-none-eabi/$SAMPLES

# Cleanup any pre-existing state.
rm -f $PACKAGEDIR/$PACKAGE_NAME_NATIVE.tar.bz2
rm -f $BUILDDIR_NATIVE/$INSTALL_PACKAGE_NAME

# Start making the package.
pushd $BUILDDIR_NATIVE
ln -s $INSTALLDIR_NATIVE $INSTALL_PACKAGE_NAME

# Make the package tarball.
${TAR} cjf $PACKAGEDIR/$PACKAGE_NAME_NATIVE.tar.bz2   \
    --owner=0                               \
    --group=0                               \
    --exclude=host-$HOST_NATIVE             \
    --exclude=host-$HOST_MINGW              \
    $INSTALL_PACKAGE_NAME/arm-none-eabi     \
    $INSTALL_PACKAGE_NAME/bin               \
    $INSTALL_PACKAGE_NAME/lib               \
    $INSTALL_PACKAGE_NAME/share

# Remove stale links.
rm -f $INSTALL_PACKAGE_NAME
popd

# skip building mingw32 toolchain if "--skip_mingw32" specified
# this huge if statement controls all $BUILDDIR_MINGW tasks till "task [IV-8]"
if [ "x$skip_mingw32" != "xyes" ] ; then
saveenv
saveenvvar CC_FOR_BUILD gcc
saveenvvar CC $HOST_MINGW_TOOL-gcc
saveenvvar CXX $HOST_MINGW_TOOL-g++
saveenvvar AR $HOST_MINGW_TOOL-ar
saveenvvar RANLIB $HOST_MINGW_TOOL-ranlib
saveenvvar STRIP $HOST_MINGW_TOOL-strip
saveenvvar NM $HOST_MINGW_TOOL-nm

echo Task [IV-0] /$HOST_MINGW/host_unpack/
rm -rf $BUILDDIR_MINGW/tools-$OBJ_SUFFIX_NATIVE && mkdir $BUILDDIR_MINGW/tools-$OBJ_SUFFIX_NATIVE
pushd $BUILDDIR_MINGW/tools-$OBJ_SUFFIX_NATIVE
ln -s . $INSTALL_PACKAGE_NAME
tar xf $PACKAGEDIR/$PACKAGE_NAME_NATIVE.tar.bz2 --bzip2
rm $INSTALL_PACKAGE_NAME
popd

echo Task [IV-1] /$HOST_MINGW/binutils/
prepend_path PATH $BUILDDIR_MINGW/tools-$OBJ_SUFFIX_NATIVE/bin
rm -rf $BUILDDIR_MINGW/binutils && mkdir -p $BUILDDIR_MINGW/binutils
pushd $BUILDDIR_MINGW/binutils
saveenv
saveenvvar CFLAGS "-I$BUILDDIR_MINGW/host-libs/zlib/include -O2"
saveenvvar CPPFLAGS "-I$BUILDDIR_MINGW/host-libs/zlib/include"
saveenvvar LDFLAGS "-L$BUILDDIR_MINGW/host-libs/zlib/lib -Wl,/usr/i686-w64-mingw32/lib/CRT_glob.o"
$SRCDIR/$BINUTILS/configure --build=$BUILD \
    --host=$HOST_MINGW \
    --target=$TARGET \
    --prefix=$INSTALLDIR_MINGW \
    --infodir=$INSTALLDIR_MINGW_DOC/info \
    --mandir=$INSTALLDIR_MINGW_DOC/man \
    --htmldir=$INSTALLDIR_MINGW_DOC/html \
    --pdfdir=$INSTALLDIR_MINGW_DOC/pdf \
    --disable-nls \
    --disable-sim \
    --disable-gdb \
    --enable-plugins \
    --with-sysroot=$INSTALLDIR_MINGW/arm-none-eabi \
    "--with-pkgversion=$PKGVERSION"

if [ "x$DEBUG_BUILD_OPTIONS" != "x" ] ; then
    make CFLAGS="-I$BUILDDIR_MINGW/host-libs/zlib/include $DEBUG_BUILD_OPTIONS" -j$JOBS
else
    make -j$JOBS
fi

make install

if [ "x$skip_manual" != "xyes" ]; then
	make install-html install-pdf
fi

restoreenv
popd

pushd $INSTALLDIR_MINGW
rm -rf ./lib
popd

echo Task [IV-2] /$HOST_MINGW/copy_libs/
if [ "x$skip_manual" != "xyes" ]; then
copy_dir $BUILDDIR_MINGW/tools-$OBJ_SUFFIX_NATIVE/share/doc/gcc-arm-none-eabi/html $INSTALLDIR_MINGW_DOC/html
copy_dir $BUILDDIR_MINGW/tools-$OBJ_SUFFIX_NATIVE/share/doc/gcc-arm-none-eabi/pdf $INSTALLDIR_MINGW_DOC/pdf
fi
copy_dir $BUILDDIR_MINGW/tools-$OBJ_SUFFIX_NATIVE/arm-none-eabi/lib $INSTALLDIR_MINGW/arm-none-eabi/lib
copy_dir $BUILDDIR_MINGW/tools-$OBJ_SUFFIX_NATIVE/arm-none-eabi/include $INSTALLDIR_MINGW/arm-none-eabi/include
copy_dir $BUILDDIR_MINGW/tools-$OBJ_SUFFIX_NATIVE/arm-none-eabi/include/c++ $INSTALLDIR_MINGW/arm-none-eabi/include/c++
copy_dir $BUILDDIR_MINGW/tools-$OBJ_SUFFIX_NATIVE/lib/gcc/arm-none-eabi $INSTALLDIR_MINGW/lib/gcc/arm-none-eabi

echo Task [IV-3] /$HOST_MINGW/gcc-final/
saveenv
saveenvvar AR_FOR_TARGET $TARGET-ar
saveenvvar NM_FOR_TARGET $TARGET-nm
saveenvvar OBJDUMP_FOR_TARET $TARGET-objdump
saveenvvar STRIP_FOR_TARGET $TARGET-strip
saveenvvar CC_FOR_TARGET $TARGET-gcc
saveenvvar GCC_FOR_TARGET $TARGET-gcc
saveenvvar CXX_FOR_TARGET $TARGET-g++

pushd $INSTALLDIR_MINGW/arm-none-eabi/
rm -f usr
ln -s . usr
popd
rm -rf $BUILDDIR_MINGW/gcc && mkdir -p $BUILDDIR_MINGW/gcc
pushd $BUILDDIR_MINGW/gcc
$SRCDIR/$GCC/configure --build=$BUILD --host=$HOST_MINGW --target=$TARGET \
    --prefix=$INSTALLDIR_MINGW \
    --libexecdir=$INSTALLDIR_MINGW/lib \
    --infodir=$INSTALLDIR_MINGW_DOC/info \
    --mandir=$INSTALLDIR_MINGW_DOC/man \
    --htmldir=$INSTALLDIR_MINGW_DOC/html \
    --pdfdir=$INSTALLDIR_MINGW_DOC/pdf \
    --enable-languages=c,c++ \
    --enable-mingw-wildcard \
    --disable-decimal-float \
    --disable-libffi \
    --disable-libgomp \
    --disable-libmudflap \
    --disable-libquadmath \
    --disable-libssp \
    --disable-libstdcxx-pch \
    --disable-nls \
    --disable-shared \
    "${THREAD_ARGUMENTS[@]}" \
    --with-gnu-as \
    --with-gnu-ld \
    --with-headers=yes \
    --with-newlib \
    --with-python-dir=share/gcc-arm-none-eabi \
    --with-sysroot=$INSTALLDIR_MINGW/arm-none-eabi \
    --with-libiconv-prefix=$BUILDDIR_MINGW/host-libs/usr \
    --with-gmp=$BUILDDIR_MINGW/host-libs/usr \
    --with-mpfr=$BUILDDIR_MINGW/host-libs/usr \
    --with-mpc=$BUILDDIR_MINGW/host-libs/usr \
    --with-isl=$BUILDDIR_MINGW/host-libs/usr \
    --with-libelf=$BUILDDIR_MINGW/host-libs/usr \
    "--with-host-libstdcxx=-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm" \
    "--with-pkgversion=$PKGVERSION" \
    ${MULTILIB_LIST}

if [ "x$DEBUG_BUILD_OPTIONS" != "x" ]; then
  make -j$JOBS CXXFLAGS="$DEBUG_BUILD_OPTIONS" all-gcc
else
  make -j$JOBS all-gcc
fi

make  install-gcc

if [ "x$skip_manual" != "xyes" ]; then
	make install-html-gcc install-pdf-gcc
fi
popd

pushd $INSTALLDIR_MINGW
rm -rf bin/arm-none-eabi-gccbug
rm -rf  include
popd

copy_dir $BUILDDIR_MINGW/tools-$OBJ_SUFFIX_NATIVE/lib/gcc/arm-none-eabi $INSTALLDIR_MINGW/lib/gcc/arm-none-eabi
rm -rf $INSTALLDIR_MINGW/arm-none-eabi/usr
rm -rf $INSTALLDIR_MINGW/lib/gcc/arm-none-eabi/*/plugin
find $INSTALLDIR_MINGW -executable -and -not -type d -and -not -name \*.exe \
  -and -not -name liblto_plugin-0.dll -exec rm -f \{\} \;
restoreenv

echo Task [IV-4] /$HOST_MINGW/gdb/
build_mingw_gdb()
{
	MINGW_GDB_CONF_OPTS=$1
	rm -rf $BUILDDIR_MINGW/gdb && mkdir -p $BUILDDIR_MINGW/gdb
	pushd $BUILDDIR_MINGW/gdb
	saveenv
	saveenvvar CFLAGS "-I$BUILDDIR_MINGW/host-libs/zlib/include -O2"
	saveenvvar CPPFLAGS "-I$BUILDDIR_MINGW/host-libs/zlib/include"
	saveenvvar LDFLAGS "-L$BUILDDIR_MINGW/host-libs/zlib/lib -Wl,/usr/i686-w64-mingw32/lib/CRT_glob.o"
	$SRCDIR/$GDB/configure --build=$BUILD \
	    --host=$HOST_MINGW \
	    --target=$TARGET \
	    --prefix=$INSTALLDIR_MINGW \
	    --infodir=$INSTALLDIR_MINGW_DOC/info \
	    --mandir=$INSTALLDIR_MINGW_DOC/man \
	    --htmldir=$INSTALLDIR_MINGW_DOC/html \
	    --pdfdir=$INSTALLDIR_MINGW_DOC/pdf \
	    --disable-nls \
	    --disable-sim \
	    --disable-gas \
	    --disable-binutils \
	    --disable-ld \
	    --disable-gprof \
	    --with-lzma=no \
	    $MINGW_GDB_CONF_OPTS \
	    --with-libexpat \
	    --with-libexpat-prefix=$BUILDDIR_MINGW/host-libs/usr \
	    --with-libiconv-prefix=$BUILDDIR_MINGW/host-libs/usr \
	    --with-system-gdbinit=$INSTALLDIR_MINGW/$HOST_MINGW/arm-none-eabi/lib/gdbinit \
	    '--with-gdb-datadir='\''${prefix}'\''/arm-none-eabi/share/gdb' \
	    "--with-pkgversion=$PKGVERSION"

	if [ "x$DEBUG_BUILD_OPTIONS" != "x" ] ; then
	    make CFLAGS="-I$BUILDDIR_MINGW/host-libs/zlib/include $DEBUG_BUILD_OPTIONS" -j$JOBS
	else
	    make -j$JOBS
	fi

	make install
	if [ "x$skip_manual" != "xyes" ]; then
		make install-html install-pdf
	fi

	restoreenv
	popd
}

build_mingw_gdb "--with-python=no"

if [ "x$skip_mingw32_gdb_with_python" == "xno" ]; then
    export GNURM_PYTHON_WIN_DIR=$SRCDIR/$PYTHON_WIN
    build_mingw_gdb "--with-python=$script_path/python-config.sh --program-suffix=-py --program-prefix=$TARGET-"
fi

echo Task [IV-5] /$HOST_MINGW/pretidy/
pushd $INSTALLDIR_MINGW
rm -rf ./lib/libiberty.a
rm -rf $INSTALLDIR_MINGW_DOC/info
rm -rf $INSTALLDIR_MINGW_DOC/man

find $INSTALLDIR_MINGW -name '*.la' -exec rm '{}' ';'

echo Task [IV-6] /$HOST_MINGW/strip_host_objects/
STRIP_BINARIES=`find $INSTALLDIR_MINGW/bin/ -name arm-none-eabi-\*.exe`
if [ "x$DEBUG_BUILD_OPTIONS" = "x" ] ; then
    for bin in $STRIP_BINARIES ; do
        strip_binary $HOST_MINGW_TOOL-strip $bin
    done

    STRIP_BINARIES=`find $INSTALLDIR_MINGW/arm-none-eabi/bin/ -maxdepth 1 -mindepth 1 -name \*.exe`
    for bin in $STRIP_BINARIES ; do
        strip_binary $HOST_MINGW_TOOL-strip $bin
    done

    STRIP_BINARIES=`find $INSTALLDIR_MINGW/lib/gcc/arm-none-eabi/$GCC_VER/ -name \*.exe`
    for bin in $STRIP_BINARIES ; do
        strip_binary $HOST_MINGW_TOOL-strip $bin
    done
fi

echo Task [IV-7] /$HOST_MINGW/installation/
rm -f $PACKAGEDIR/$PACKAGE_NAME_MINGW.exe
pushd $BUILDDIR_MINGW
rm -f $INSTALL_PACKAGE_NAME
cp $ROOT/$RELEASE_FILE $INSTALLDIR_MINGW_DOC/
cp $ROOT/$README_FILE $INSTALLDIR_MINGW_DOC/
cp $ROOT/$LICENSE_FILE $INSTALLDIR_MINGW_DOC/
copy_dir_clean $SRCDIR/$SAMPLES $INSTALLDIR_MINGW/share/gcc-arm-none-eabi/$SAMPLES
flip -m $INSTALLDIR_MINGW_DOC/$RELEASE_FILE
flip -m $INSTALLDIR_MINGW_DOC/$README_FILE
flip -m -b $INSTALLDIR_MINGW_DOC/$LICENSE_FILE
flip -m $INSTALLDIR_MINGW/share/gcc-arm-none-eabi/$SAMPLES_DOS_FILES
rm -rf $INSTALLDIR_MINGW/include
ln -s $INSTALLDIR_MINGW $INSTALL_PACKAGE_NAME

cp $SRCDIR/$INSTALLATION/gccvar.bat $INSTALLDIR_MINGW/bin
mkdir -p $SRCDIR/$INSTALLATION/output
makensis -DBaseDir=$INSTALLDIR_MINGW  \
         -DIncDir=$SRCDIR \
         -DAppName="$APPNAME" \
         -DAppRootNameStr="$PKGROOTNAME"   \
         -DAppNameStr="$PKGVERSION"   \
         -DPackageName=$PACKAGE_NAME_MINGW   \
         -DInstallDirBase="$INSTALLBASE"   \
         -DInstallDirVer="$GCC_VER_SHORT $RELEASEVER" \
         "-XOutFile $SRCDIR/$INSTALLATION/output/$PACKAGE_NAME_MINGW.exe"    \
         $SRCDIR/$INSTALLATION/arm-none-eabi-gnu-tools.nsi

cp -rf $SRCDIR/$INSTALLATION/output/$PACKAGE_NAME_MINGW.exe $PACKAGEDIR/
rm -f $INSTALL_PACKAGE_NAME
popd
restoreenv

echo Task [IV-8] /Package toolchain in zip format/
pushd $INSTALLDIR_MINGW
rm -f $PACKAGEDIR/$PACKAGE_NAME_MINGW.zip
zip -r9 $PACKAGEDIR/$PACKAGE_NAME_MINGW.zip .
popd
fi #end of if [ "x$skip_mingw32" != "xyes" ] ;

echo Task [V-0] /package_sources/
pushd $PACKAGEDIR
rm -rf $PACKAGE_NAME && mkdir -p $PACKAGE_NAME/src
pack_dir_clean $SRCDIR $BINUTILS $PACKAGE_NAME/src/$BINUTILS.tar.bz2
pack_dir_clean $SRCDIR $GCC $PACKAGE_NAME/src/$GCC.tar.bz2
pack_dir_clean $SRCDIR $GDB $PACKAGE_NAME/src/$GDB.tar.bz2 \
  --exclude="gdb/testsuite/config/qemu.exp" --exclude="sim"
pack_dir_clean $SRCDIR $NEWLIB $PACKAGE_NAME/src/$NEWLIB.tar.bz2
pack_dir_clean $SRCDIR $SAMPLES $PACKAGE_NAME/src/$SAMPLES.tar.bz2
pack_dir_clean $SRCDIR $BUILD_MANUAL $PACKAGE_NAME/src/$BUILD_MANUAL.tar.bz2
if [ "x$skip_mingw32" != "xyes" ] ; then
    pack_dir_clean $SRCDIR $INSTALLATION \
      $PACKAGE_NAME/src/$INSTALLATION.tar.bz2 \
      --exclude=build.log --exclude=output
fi
cp $ROOT/$RELEASE_FILE $PACKAGE_NAME/
cp $ROOT/$README_FILE $PACKAGE_NAME/
cp $ROOT/$LICENSE_FILE $PACKAGE_NAME/
cp $ROOT/$BUILD_MANUAL_FILE $PACKAGE_NAME/
cp $script_path/install-sources.sh $PACKAGE_NAME/
cp $script_path/build-common.sh $PACKAGE_NAME/
cp $script_path/build-prerequisites.sh $PACKAGE_NAME/
cp $script_path/build-toolchain.sh $PACKAGE_NAME/
cp $script_path/python-config.sh $PACKAGE_NAME/
tar cjf $PACKAGE_NAME-src.tar.bz2 $PACKAGE_NAME
rm -rf $PACKAGE_NAME
popd

echo Task [V-1] /md5_checksum/
pushd $PACKAGEDIR
rm -rf md5.txt
$MD5 $PACKAGE_NAME_NATIVE.tar.bz2     >>md5.txt
if [ "x$skip_mingw32" != "xyes" ] ; then
    $MD5 $PACKAGE_NAME_MINGW.exe         >>md5.txt
    $MD5 $PACKAGE_NAME_MINGW.zip         >>md5.txt
fi
$MD5 $PACKAGE_NAME-src.tar.bz2 >>md5.txt
popd