| /* mpn_mu_divappr_q, mpn_preinv_mu_divappr_q. |
| |
| Compute Q = floor(N / D) + e. N is nn limbs, D is dn limbs and must be |
| normalized, and Q must be nn-dn limbs, 0 <= e <= 4. The requirement that Q |
| is nn-dn limbs (and not nn-dn+1 limbs) was put in place in order to allow us |
| to let N be unmodified during the operation. |
| |
| Contributed to the GNU project by Torbjorn Granlund. |
| |
| THE FUNCTIONS IN THIS FILE ARE INTERNAL WITH MUTABLE INTERFACES. IT IS ONLY |
| SAFE TO REACH THEM THROUGH DOCUMENTED INTERFACES. IN FACT, IT IS ALMOST |
| GUARANTEED THAT THEY WILL CHANGE OR DISAPPEAR IN A FUTURE GMP RELEASE. |
| |
| Copyright 2005-2007, 2009, 2010 Free Software Foundation, Inc. |
| |
| This file is part of the GNU MP Library. |
| |
| The GNU MP Library is free software; you can redistribute it and/or modify |
| it under the terms of either: |
| |
| * the GNU Lesser General Public License as published by the Free |
| Software Foundation; either version 3 of the License, or (at your |
| option) any later version. |
| |
| or |
| |
| * the GNU General Public License as published by the Free Software |
| Foundation; either version 2 of the License, or (at your option) any |
| later version. |
| |
| or both in parallel, as here. |
| |
| The GNU MP Library is distributed in the hope that it will be useful, but |
| WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| for more details. |
| |
| You should have received copies of the GNU General Public License and the |
| GNU Lesser General Public License along with the GNU MP Library. If not, |
| see https://www.gnu.org/licenses/. */ |
| |
| |
| /* |
| The idea of the algorithm used herein is to compute a smaller inverted value |
| than used in the standard Barrett algorithm, and thus save time in the |
| Newton iterations, and pay just a small price when using the inverted value |
| for developing quotient bits. This algorithm was presented at ICMS 2006. |
| */ |
| |
| /* CAUTION: This code and the code in mu_div_qr.c should be edited in sync. |
| |
| Things to work on: |
| |
| * The itch/scratch scheme isn't perhaps such a good idea as it once seemed, |
| demonstrated by the fact that the mpn_invertappr function's scratch needs |
| mean that we need to keep a large allocation long after it is needed. |
| Things are worse as mpn_mul_fft does not accept any scratch parameter, |
| which means we'll have a large memory hole while in mpn_mul_fft. In |
| general, a peak scratch need in the beginning of a function isn't |
| well-handled by the itch/scratch scheme. |
| */ |
| |
| #ifdef STAT |
| #undef STAT |
| #define STAT(x) x |
| #else |
| #define STAT(x) |
| #endif |
| |
| #include <stdlib.h> /* for NULL */ |
| #include "gmp.h" |
| #include "gmp-impl.h" |
| |
| |
| mp_limb_t |
| mpn_mu_divappr_q (mp_ptr qp, |
| mp_srcptr np, |
| mp_size_t nn, |
| mp_srcptr dp, |
| mp_size_t dn, |
| mp_ptr scratch) |
| { |
| mp_size_t qn, in; |
| mp_limb_t cy, qh; |
| mp_ptr ip, tp; |
| |
| ASSERT (dn > 1); |
| |
| qn = nn - dn; |
| |
| /* If Q is smaller than D, truncate operands. */ |
| if (qn + 1 < dn) |
| { |
| np += dn - (qn + 1); |
| nn -= dn - (qn + 1); |
| dp += dn - (qn + 1); |
| dn = qn + 1; |
| } |
| |
| /* Compute the inverse size. */ |
| in = mpn_mu_divappr_q_choose_in (qn, dn, 0); |
| ASSERT (in <= dn); |
| |
| #if 1 |
| /* This alternative inverse computation method gets slightly more accurate |
| results. FIXMEs: (1) Temp allocation needs not analysed (2) itch function |
| not adapted (3) mpn_invertappr scratch needs not met. */ |
| ip = scratch; |
| tp = scratch + in + 1; |
| |
| /* compute an approximate inverse on (in+1) limbs */ |
| if (dn == in) |
| { |
| MPN_COPY (tp + 1, dp, in); |
| tp[0] = 1; |
| mpn_invertappr (ip, tp, in + 1, tp + in + 1); |
| MPN_COPY_INCR (ip, ip + 1, in); |
| } |
| else |
| { |
| cy = mpn_add_1 (tp, dp + dn - (in + 1), in + 1, 1); |
| if (UNLIKELY (cy != 0)) |
| MPN_ZERO (ip, in); |
| else |
| { |
| mpn_invertappr (ip, tp, in + 1, tp + in + 1); |
| MPN_COPY_INCR (ip, ip + 1, in); |
| } |
| } |
| #else |
| /* This older inverse computation method gets slightly worse results than the |
| one above. */ |
| ip = scratch; |
| tp = scratch + in; |
| |
| /* Compute inverse of D to in+1 limbs, then round to 'in' limbs. Ideally the |
| inversion function should do this automatically. */ |
| if (dn == in) |
| { |
| tp[in + 1] = 0; |
| MPN_COPY (tp + in + 2, dp, in); |
| mpn_invertappr (tp, tp + in + 1, in + 1, NULL); |
| } |
| else |
| { |
| mpn_invertappr (tp, dp + dn - (in + 1), in + 1, NULL); |
| } |
| cy = mpn_sub_1 (tp, tp, in + 1, GMP_NUMB_HIGHBIT); |
| if (UNLIKELY (cy != 0)) |
| MPN_ZERO (tp + 1, in); |
| MPN_COPY (ip, tp + 1, in); |
| #endif |
| |
| qh = mpn_preinv_mu_divappr_q (qp, np, nn, dp, dn, ip, in, scratch + in); |
| |
| return qh; |
| } |
| |
| mp_limb_t |
| mpn_preinv_mu_divappr_q (mp_ptr qp, |
| mp_srcptr np, |
| mp_size_t nn, |
| mp_srcptr dp, |
| mp_size_t dn, |
| mp_srcptr ip, |
| mp_size_t in, |
| mp_ptr scratch) |
| { |
| mp_size_t qn; |
| mp_limb_t cy, cx, qh; |
| mp_limb_t r; |
| mp_size_t tn, wn; |
| |
| #define rp scratch |
| #define tp (scratch + dn) |
| #define scratch_out (scratch + dn + tn) |
| |
| qn = nn - dn; |
| |
| np += qn; |
| qp += qn; |
| |
| qh = mpn_cmp (np, dp, dn) >= 0; |
| if (qh != 0) |
| mpn_sub_n (rp, np, dp, dn); |
| else |
| MPN_COPY (rp, np, dn); |
| |
| if (qn == 0) |
| return qh; /* Degenerate use. Should we allow this? */ |
| |
| while (qn > 0) |
| { |
| if (qn < in) |
| { |
| ip += in - qn; |
| in = qn; |
| } |
| np -= in; |
| qp -= in; |
| |
| /* Compute the next block of quotient limbs by multiplying the inverse I |
| by the upper part of the partial remainder R. */ |
| mpn_mul_n (tp, rp + dn - in, ip, in); /* mulhi */ |
| cy = mpn_add_n (qp, tp + in, rp + dn - in, in); /* I's msb implicit */ |
| ASSERT_ALWAYS (cy == 0); |
| |
| qn -= in; |
| if (qn == 0) |
| break; |
| |
| /* Compute the product of the quotient block and the divisor D, to be |
| subtracted from the partial remainder combined with new limbs from the |
| dividend N. We only really need the low dn limbs. */ |
| |
| if (BELOW_THRESHOLD (in, MUL_TO_MULMOD_BNM1_FOR_2NXN_THRESHOLD)) |
| mpn_mul (tp, dp, dn, qp, in); /* dn+in limbs, high 'in' cancels */ |
| else |
| { |
| tn = mpn_mulmod_bnm1_next_size (dn + 1); |
| mpn_mulmod_bnm1 (tp, tn, dp, dn, qp, in, scratch_out); |
| wn = dn + in - tn; /* number of wrapped limbs */ |
| if (wn > 0) |
| { |
| cy = mpn_sub_n (tp, tp, rp + dn - wn, wn); |
| cy = mpn_sub_1 (tp + wn, tp + wn, tn - wn, cy); |
| cx = mpn_cmp (rp + dn - in, tp + dn, tn - dn) < 0; |
| ASSERT_ALWAYS (cx >= cy); |
| mpn_incr_u (tp, cx - cy); |
| } |
| } |
| |
| r = rp[dn - in] - tp[dn]; |
| |
| /* Subtract the product from the partial remainder combined with new |
| limbs from the dividend N, generating a new partial remainder R. */ |
| if (dn != in) |
| { |
| cy = mpn_sub_n (tp, np, tp, in); /* get next 'in' limbs from N */ |
| cy = mpn_sub_nc (tp + in, rp, tp + in, dn - in, cy); |
| MPN_COPY (rp, tp, dn); /* FIXME: try to avoid this */ |
| } |
| else |
| { |
| cy = mpn_sub_n (rp, np, tp, in); /* get next 'in' limbs from N */ |
| } |
| |
| STAT (int i; int err = 0; |
| static int errarr[5]; static int err_rec; static int tot); |
| |
| /* Check the remainder R and adjust the quotient as needed. */ |
| r -= cy; |
| while (r != 0) |
| { |
| /* We loop 0 times with about 69% probability, 1 time with about 31% |
| probability, 2 times with about 0.6% probability, if inverse is |
| computed as recommended. */ |
| mpn_incr_u (qp, 1); |
| cy = mpn_sub_n (rp, rp, dp, dn); |
| r -= cy; |
| STAT (err++); |
| } |
| if (mpn_cmp (rp, dp, dn) >= 0) |
| { |
| /* This is executed with about 76% probability. */ |
| mpn_incr_u (qp, 1); |
| cy = mpn_sub_n (rp, rp, dp, dn); |
| STAT (err++); |
| } |
| |
| STAT ( |
| tot++; |
| errarr[err]++; |
| if (err > err_rec) |
| err_rec = err; |
| if (tot % 0x10000 == 0) |
| { |
| for (i = 0; i <= err_rec; i++) |
| printf (" %d(%.1f%%)", errarr[i], 100.0*errarr[i]/tot); |
| printf ("\n"); |
| } |
| ); |
| } |
| |
| /* FIXME: We should perhaps be somewhat more elegant in our rounding of the |
| quotient. For now, just make sure the returned quotient is >= the real |
| quotient; add 3 with saturating arithmetic. */ |
| qn = nn - dn; |
| cy += mpn_add_1 (qp, qp, qn, 3); |
| if (cy != 0) |
| { |
| if (qh != 0) |
| { |
| /* Return a quotient of just 1-bits, with qh set. */ |
| mp_size_t i; |
| for (i = 0; i < qn; i++) |
| qp[i] = GMP_NUMB_MAX; |
| } |
| else |
| { |
| /* Propagate carry into qh. */ |
| qh = 1; |
| } |
| } |
| |
| return qh; |
| } |
| |
| /* In case k=0 (automatic choice), we distinguish 3 cases: |
| (a) dn < qn: in = ceil(qn / ceil(qn/dn)) |
| (b) dn/3 < qn <= dn: in = ceil(qn / 2) |
| (c) qn < dn/3: in = qn |
| In all cases we have in <= dn. |
| */ |
| mp_size_t |
| mpn_mu_divappr_q_choose_in (mp_size_t qn, mp_size_t dn, int k) |
| { |
| mp_size_t in; |
| |
| if (k == 0) |
| { |
| mp_size_t b; |
| if (qn > dn) |
| { |
| /* Compute an inverse size that is a nice partition of the quotient. */ |
| b = (qn - 1) / dn + 1; /* ceil(qn/dn), number of blocks */ |
| in = (qn - 1) / b + 1; /* ceil(qn/b) = ceil(qn / ceil(qn/dn)) */ |
| } |
| else if (3 * qn > dn) |
| { |
| in = (qn - 1) / 2 + 1; /* b = 2 */ |
| } |
| else |
| { |
| in = (qn - 1) / 1 + 1; /* b = 1 */ |
| } |
| } |
| else |
| { |
| mp_size_t xn; |
| xn = MIN (dn, qn); |
| in = (xn - 1) / k + 1; |
| } |
| |
| return in; |
| } |
| |
| mp_size_t |
| mpn_mu_divappr_q_itch (mp_size_t nn, mp_size_t dn, int mua_k) |
| { |
| mp_size_t qn, in, itch_local, itch_out, itch_invapp; |
| |
| qn = nn - dn; |
| if (qn + 1 < dn) |
| { |
| dn = qn + 1; |
| } |
| in = mpn_mu_divappr_q_choose_in (qn, dn, mua_k); |
| |
| itch_local = mpn_mulmod_bnm1_next_size (dn + 1); |
| itch_out = mpn_mulmod_bnm1_itch (itch_local, dn, in); |
| itch_invapp = mpn_invertappr_itch (in + 1) + in + 2; /* 3in + 4 */ |
| |
| ASSERT (dn + itch_local + itch_out >= itch_invapp); |
| return in + MAX (dn + itch_local + itch_out, itch_invapp); |
| } |