src/mpfr-3.1.4/tests/Makefile.am - stadia-controller/gcc-arm-none-eabi - Git at Google

 # Copyright 2000-2016 Free Software Foundation, Inc.
 # This Makefile.am is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.

 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.


 AUTOMAKE_OPTIONS = 1.6 gnu

 check_PROGRAMS = tversion tinternals tinits tisqrt tsgn tcheck		\
      tisnan texceptions tset_exp tset mpf_compat mpfr_compat		\
      reuse tabs tacos tacosh tadd tadd1sp tadd_d tadd_ui tagm		\
      tai tasin tasinh tatan tatanh taway tbuildopt tcan_round		\
      tcbrt tcmp tcmp2 tcmp_d tcmp_ld tcmp_ui tcmpabs			\
      tcomparisons tconst_catalan tconst_euler tconst_log2		\
      tconst_pi tcopysign tcos tcosh tcot tcoth tcsc tcsch		\
      td_div td_sub tdigamma tdim tdiv tdiv_d tdiv_ui teint teq		\
      terf texp texp10 texp2 texpm1 tfactorial tfits tfma tfmod		\
      tfms tfprintf tfrac tfrexp tgamma tget_flt tget_d tget_d_2exp 	\
      tget_f tget_ld_2exp tget_set_d64 tget_sj tget_str tget_z		\
      tgmpop tgrandom thyperbolic thypot tinp_str tj0 tj1 tjn tl2b	\
      tlgamma tli2 tlngamma tlog tlog10 tlog1p tlog2 tmin_prec		\
      tminmax tmodf tmul tmul_2exp tmul_d tmul_ui tnext			\
      tout_str toutimpl tpow tpow3 tpow_all tpow_z tprintf		\
      trandom trec_sqrt tremquo trint troot tround_prec tsec		\
      tsech tset_d tset_f tset_ld tset_q tset_si tset_sj			\
      tset_str tset_z tset_z_exp tsi_op tsin tsin_cos tsinh		\
      tsinh_cosh tsprintf tsqr tsqrt tsqrt_ui tstckintc tstdint tstrtofr	\
      tsub tsub1sp tsub_d tsub_ui tsubnormal tsum tswap ttan		\
      ttanh ttrunc tui_div tui_pow tui_sub turandom 	 		\
      tvalist ty0 ty1 tyn tzeta tzeta_ui

 # Before Automake 1.13, we ran tversion at the beginning and at the end
 # of the tests, and output from tversion appeared at the same place as
 # the tests results (make output). With Automake 1.13+, the tests are
 # parallelized by default and their output is sent to log files instead
 # of the make output, so that the user could no longer see information
 # from tversion. To mimic the old behavior, we now output the contents
 # of the tversion log file if this file exists (i.e. if the Makefile
 # has been generated with Automake 1.13+).
 check:
 	cat tversion.log 2> /dev/null || true

 AM_CPPFLAGS = -DSRCDIR='"$(srcdir)"'

 EXTRA_DIST = tgeneric.c tgeneric_ui.c mpf_compat.h inp_str.data tmul.dat

 LDADD = libfrtests.la $(MPFR_LIBM) $(top_builddir)/src/libmpfr.la
 AM_CPPFLAGS += -I$(top_srcdir)/src -I$(top_builddir)/src

 # LOADLIBES (documented in the "GNU make" manual and equivalent to LDLIBS)
 # enables to compile a program foo.c in the test directory by simply doing
 # "make foo".
 # Warning! This is not guaranteed to work, as libtool is not used. In
 # particular, this may not work as expected under GNU/Linux if --with-gmp
 # has been used, unless the directory is in your $LD_LIBRARY_PATH.
 # Moreover, dependencies are not tracked. Thus you may want to run
 # "make tversion" (for instance) just before, to make sure that every
 # dependency has been rebuilt.
 LOADLIBES=$(DEFS) $(AM_CPPFLAGS) $(CPPFLAGS) $(CFLAGS) $(top_builddir)/tests/.libs/libfrtests.a $(top_builddir)/src/.libs/libmpfr.a $(LIBS) $(MPFR_LIBM)

 check_LTLIBRARIES = libfrtests.la
 libfrtests_la_SOURCES = mpfr-test.h memory.c rnd_mode.c tests.c cmp_str.c random2.c

 $(top_builddir)/src/libmpfr.la:
 	cd $(top_builddir)/src && $(MAKE) $(AM_MAKEFLAGS) libmpfr.la

 TESTS = $(check_PROGRAMS)
 TESTS_ENVIRONMENT = MPFR_QUIET=1 $(VALGRIND)

 # The -no-install option prevents libtool from generating wrapper scripts
 # for the tests.
 # This is useful to easily run the test scripts under valgrind or gdb.
 # See discussion http://thread.gmane.org/gmane.comp.lib.gnulib.bugs/28033
 # http://article.gmane.org/gmane.comp.lib.gnulib.bugs/28140 in particular.
 #
 # The -L$(top_builddir)/src/.libs option is necessary for some platforms,
 # such as HP-UX, when --with-gmp or --with-gmp-lib is used and an old MPFR
 # library is already installed in the corresponding lib directory: its
 # purpose is to make sure that the local .libs comes first in the library
 # search path (otherwise the tests are linked against the old MPFR library
 # by the LINK command -- see the generated Makefile). See:
 #   https://sympa.inria.fr/sympa/arc/mpfr/2011-10/msg00042.html
 #   https://sympa.inria.fr/sympa/arc/mpfr/2011-10/msg00043.html
 #   https://sympa.inria.fr/sympa/arc/mpfr/2011-10/msg00044.html
 #   https://sympa.inria.fr/sympa/arc/mpfr/2011-10/msg00066.html
 #   https://sympa.inria.fr/sympa/arc/mpfr/2011-10/msg00065.html
 # and
 #   http://debbugs.gnu.org/cgi/bugreport.cgi?bug=9728
 #
 AM_LDFLAGS = -no-install -L$(top_builddir)/src/.libs
	# Copyright 2000-2016 Free Software Foundation, Inc.
	# This Makefile.am is free software; the Free Software Foundation
	# gives unlimited permission to copy and/or distribute it,
	# with or without modifications, as long as this notice is preserved.

	# This program is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
	# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
	# PARTICULAR PURPOSE.


	AUTOMAKE_OPTIONS = 1.6 gnu

	check_PROGRAMS = tversion tinternals tinits tisqrt tsgn tcheck \
	tisnan texceptions tset_exp tset mpf_compat mpfr_compat \
	reuse tabs tacos tacosh tadd tadd1sp tadd_d tadd_ui tagm \
	tai tasin tasinh tatan tatanh taway tbuildopt tcan_round \
	tcbrt tcmp tcmp2 tcmp_d tcmp_ld tcmp_ui tcmpabs \
	tcomparisons tconst_catalan tconst_euler tconst_log2 \
	tconst_pi tcopysign tcos tcosh tcot tcoth tcsc tcsch \
	td_div td_sub tdigamma tdim tdiv tdiv_d tdiv_ui teint teq \
	terf texp texp10 texp2 texpm1 tfactorial tfits tfma tfmod \
	tfms tfprintf tfrac tfrexp tgamma tget_flt tget_d tget_d_2exp \
	tget_f tget_ld_2exp tget_set_d64 tget_sj tget_str tget_z \
	tgmpop tgrandom thyperbolic thypot tinp_str tj0 tj1 tjn tl2b \
	tlgamma tli2 tlngamma tlog tlog10 tlog1p tlog2 tmin_prec \
	tminmax tmodf tmul tmul_2exp tmul_d tmul_ui tnext \
	tout_str toutimpl tpow tpow3 tpow_all tpow_z tprintf \
	trandom trec_sqrt tremquo trint troot tround_prec tsec \
	tsech tset_d tset_f tset_ld tset_q tset_si tset_sj \
	tset_str tset_z tset_z_exp tsi_op tsin tsin_cos tsinh \
	tsinh_cosh tsprintf tsqr tsqrt tsqrt_ui tstckintc tstdint tstrtofr \
	tsub tsub1sp tsub_d tsub_ui tsubnormal tsum tswap ttan \
	ttanh ttrunc tui_div tui_pow tui_sub turandom \
	tvalist ty0 ty1 tyn tzeta tzeta_ui

	# Before Automake 1.13, we ran tversion at the beginning and at the end
	# of the tests, and output from tversion appeared at the same place as
	# the tests results (make output). With Automake 1.13+, the tests are
	# parallelized by default and their output is sent to log files instead
	# of the make output, so that the user could no longer see information
	# from tversion. To mimic the old behavior, we now output the contents
	# of the tversion log file if this file exists (i.e. if the Makefile
	# has been generated with Automake 1.13+).
	check:
	cat tversion.log 2> /dev/null \|\| true

	AM_CPPFLAGS = -DSRCDIR='"$(srcdir)"'

	EXTRA_DIST = tgeneric.c tgeneric_ui.c mpf_compat.h inp_str.data tmul.dat

	LDADD = libfrtests.la $(MPFR_LIBM) $(top_builddir)/src/libmpfr.la
	AM_CPPFLAGS += -I$(top_srcdir)/src -I$(top_builddir)/src

	# LOADLIBES (documented in the "GNU make" manual and equivalent to LDLIBS)
	# enables to compile a program foo.c in the test directory by simply doing
	# "make foo".
	# Warning! This is not guaranteed to work, as libtool is not used. In
	# particular, this may not work as expected under GNU/Linux if --with-gmp
	# has been used, unless the directory is in your $LD_LIBRARY_PATH.
	# Moreover, dependencies are not tracked. Thus you may want to run
	# "make tversion" (for instance) just before, to make sure that every
	# dependency has been rebuilt.
	LOADLIBES=$(DEFS) $(AM_CPPFLAGS) $(CPPFLAGS) $(CFLAGS) $(top_builddir)/tests/.libs/libfrtests.a $(top_builddir)/src/.libs/libmpfr.a $(LIBS) $(MPFR_LIBM)

	check_LTLIBRARIES = libfrtests.la
	libfrtests_la_SOURCES = mpfr-test.h memory.c rnd_mode.c tests.c cmp_str.c random2.c

	$(top_builddir)/src/libmpfr.la:
	cd $(top_builddir)/src && $(MAKE) $(AM_MAKEFLAGS) libmpfr.la

	TESTS = $(check_PROGRAMS)
	TESTS_ENVIRONMENT = MPFR_QUIET=1 $(VALGRIND)

	# The -no-install option prevents libtool from generating wrapper scripts
	# for the tests.
	# This is useful to easily run the test scripts under valgrind or gdb.
	# See discussion http://thread.gmane.org/gmane.comp.lib.gnulib.bugs/28033
	# http://article.gmane.org/gmane.comp.lib.gnulib.bugs/28140 in particular.
	#
	# The -L$(top_builddir)/src/.libs option is necessary for some platforms,
	# such as HP-UX, when --with-gmp or --with-gmp-lib is used and an old MPFR
	# library is already installed in the corresponding lib directory: its
	# purpose is to make sure that the local .libs comes first in the library
	# search path (otherwise the tests are linked against the old MPFR library
	# by the LINK command -- see the generated Makefile). See:
	# https://sympa.inria.fr/sympa/arc/mpfr/2011-10/msg00042.html
	# https://sympa.inria.fr/sympa/arc/mpfr/2011-10/msg00043.html
	# https://sympa.inria.fr/sympa/arc/mpfr/2011-10/msg00044.html
	# https://sympa.inria.fr/sympa/arc/mpfr/2011-10/msg00066.html
	# https://sympa.inria.fr/sympa/arc/mpfr/2011-10/msg00065.html
	# and
	# http://debbugs.gnu.org/cgi/bugreport.cgi?bug=9728
	#
	AM_LDFLAGS = -no-install -L$(top_builddir)/src/.libs