| /* |
| Copyright (c) 2015, Synopsys, Inc. All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions are met: |
| |
| 1) Redistributions of source code must retain the above copyright notice, |
| this list of conditions and the following disclaimer. |
| |
| 2) Redistributions in binary form must reproduce the above copyright notice, |
| this list of conditions and the following disclaimer in the documentation |
| and/or other materials provided with the distribution. |
| |
| 3) Neither the name of the Synopsys, Inc., nor the names of its contributors |
| may be used to endorse or promote products derived from this software |
| without specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <_ansi.h> |
| #include <_syslist.h> |
| #include <errno.h> |
| #include <sys/fcntl.h> |
| #include <sys/stat.h> |
| #include <sys/time.h> |
| #include <sys/times.h> |
| #include <sys/types.h> |
| |
| #include "glue.h" |
| #include "nsim-syscall.h" |
| |
| /* Those system calls are implemented in both nSIM and CGEN. */ |
| _syscall3 (_ssize_t, read, int, fd, void *, buf, size_t, count) |
| _syscall3 (_ssize_t, write, int, fd, const void *, buf, size_t, count) |
| _syscall1 (int, unlink, const char *, pathname) |
| _syscall3 (off_t, lseek, int, fd, off_t, offset, int, whence) |
| _syscall2 (int, gettimeofday, struct timeval *, tv, void *, tz) |
| _syscall1 (_CLOCK_T_, time, _CLOCK_T_ *, t) |
| _syscall1 (int, close, int, fd) |
| _syscall1 (_CLOCK_T_, times, struct tms *, buf) |
| /* stat requires custom implementation. */ |
| /* _syscall2 (int, stat, const char *, path, struct stat *, st) |
| _syscall2 (int, fstat, int, file, struct stat *, st) */ |
| /* nSIM implements brk and sbrk, but instead sbrk.c is used. */ |
| /* _syscall1 (int, brk, void *, addr) */ |
| /* open requires custom implementation. */ |
| /* _syscall3 (int, open, const char *, pathname, int, flags, int, mode) */ |
| |
| /* Those syscalls are not available in CGEN simulator. */ |
| _syscall1 (int, rmdir, const char *, pathname) |
| _syscall2 (char *, getcwd, char *, buf, size_t, size) |
| /* stat requires custom implementation. */ |
| /* _syscall2 (int, lstat, const char *, path, struct stat *, st) */ |
| |
| /* Historically "open" flags defined by default in newlib and in Linux for ARC |
| are different - this is true for some other architectures as well, e.g. |
| ARM. To provide compatibility ARC port of newlib had a custom fcntl.h file |
| that has "open" flags identical to Linux ones. Some other architectures |
| (spart64, cris) override default fcntl.h as well, but I'm not sure this is |
| really a good idea. Unlike system call numbers that can be unique to each |
| BSP in libgloss, "open" flags are not abstracted from the application code |
| itself, hence it is not possible to have fcntl.h in the libgloss. To make |
| matters worse, existing simulators already has been built for the Linux-like |
| "open" flags. To preserve compatibility with existing hostlink |
| implementations in simulators, but avoid custom fcntl.h in the future, |
| simulator BSP has to do dynamic rewriting of "open" flags from the newlib |
| default into old ARC Linux flags. Simulators support only most basic flags, |
| therefore only those are translated in this implementation. */ |
| int |
| _open (const char * pathname, int flags, int mode) |
| { |
| int nsim_flags = 0; |
| |
| /* RDONLY, WRONLY, RDWR are same as newlib default. */ |
| nsim_flags |= flags & O_RDONLY; |
| nsim_flags |= flags & O_WRONLY; |
| nsim_flags |= flags & O_RDWR; |
| nsim_flags |= (flags & O_CREAT) ? ARC_LINUX_CREAT : 0; |
| nsim_flags |= (flags & O_APPEND) ? ARC_LINUX_APPEND : 0; |
| nsim_flags |= (flags & O_TRUNC) ? ARC_LINUX_TRUNC : 0; |
| nsim_flags |= (flags & O_EXCL) ? ARC_LINUX_EXCL : 0; |
| /* There are other fcntl flags that are different between newlib and ARC |
| uClibc, however they are not supported by nSIM hostlink, therefore there |
| is no need to translate them. */ |
| |
| long __res; |
| _naked_syscall3 (__res, open, pathname, nsim_flags, mode) |
| return __res; |
| } |
| |
| /* Should be provided by crt0.S. */ |
| extern void __attribute__((noreturn)) _exit_halt (); |
| |
| void |
| __attribute__((noreturn)) |
| _exit (int ret) |
| { |
| /* Doing an "exit" system call would work on nSIM with hostlink, but call to |
| _exit_halt, which will do a CPU halt is more universal and will work in |
| many other cases as well, including an FPGA/SoC. */ |
| _exit_halt (); |
| } |
| |
| /* This is a copy of newlib/libc/posix/_isatty.c. It is needed because nSIM |
| hostlink doesn't implement isatty system call. Hardware boards on the other |
| hand would want isatty implementation that always returns 1, since they are |
| connected to console and doesn't have file IO. */ |
| int |
| _isatty (int fd) |
| { |
| struct stat buf; |
| |
| if (fstat (fd, &buf) < 0) |
| { |
| errno = EBADF; |
| return 0; |
| } |
| if (S_ISCHR (buf.st_mode)) |
| { |
| return 1; |
| } |
| errno = ENOTTY; |
| return 0; |
| } |
| |
| /* System call "getpid" is implemented in nSIM hostlink, but it is better not |
| to expose it in libgloss. */ |
| int |
| _getpid (void) |
| { |
| return __MYPID; |
| } |
| |
| /* System call "kill" is implemented in nSIM hostlink on Linux hosts, but it |
| seems dangerous to expose it. Instead, like most of the other "_kill" |
| implementations in libgloss, this will kill only self. */ |
| int |
| _kill (int pid, int sig) |
| { |
| if (pid == __MYPID) |
| { |
| _exit (sig); |
| } |
| errno = ENOSYS; |
| return -1; |
| } |
| |
| static void |
| translate_stat (struct nsim_stat *nsim, struct stat *buf) |
| { |
| #define TR(field, type) buf->st_ ## field = (type) nsim->field |
| TR (dev, dev_t); |
| TR (ino, ino_t); |
| TR (mode, mode_t); |
| TR (nlink, nlink_t); |
| TR (uid, uid_t); |
| TR (gid, gid_t); |
| TR (rdev, dev_t); |
| TR (size, off_t); |
| TR (atime, time_t); |
| TR (mtime, time_t); |
| TR (ctime, time_t); |
| TR (blksize, long); |
| TR (blocks, long); |
| #undef TR |
| } |
| |
| /* stat/fstat implementation. Situation is similiar to open and its flags - |
| structure is defined in libc, hence cannot be customized in libgloss, yet we |
| have a case where nSIM uses some definition which is not compatible with |
| neither old ARC-custom definition of "struct stat" in newlib, nor with |
| generic newlib implementation. */ |
| int |
| _stat (const char * path, struct stat *buf) |
| { |
| struct nsim_stat nsim_stat; |
| long __res; |
| _naked_syscall2 (__res, stat, path, &nsim_stat) |
| translate_stat (&nsim_stat, buf); |
| return __res; |
| } |
| |
| int |
| _lstat (const char * path, struct stat *buf) |
| { |
| struct nsim_stat nsim_stat; |
| long __res; |
| _naked_syscall2 (__res, stat, path, &nsim_stat) |
| translate_stat (&nsim_stat, buf); |
| return __res; |
| } |
| |
| int |
| _fstat (int fd, struct stat *buf) |
| { |
| struct nsim_stat nsim_stat; |
| long __res; |
| _naked_syscall2 (__res, stat, fd, &nsim_stat) |
| translate_stat (&nsim_stat, buf); |
| return __res; |
| } |
| |
| /* Some system calls are implemented in nSIM hostlink, but are available only |
| on Linux hosts. To minimize potential compatibility issues they are by |
| default disabled in libgloss build. */ |
| #ifdef ARC_NSIM_WIN32_HOST |
| _syscall3 (int, ioctl, int, fd, int, request, char *, argp) |
| _syscall3 (_ssize_t, readv, int, fd, const struct iovec *, iov, int, iovcnt) |
| _syscall3 (_ssize_t, writev, int, fd, const struct iovec *, iov, int, iovcnt) |
| _syscall5 (off_t, llseek, int, fd, unsigned long, offset_high, |
| unsigned long, offset_low, loff_t *, result, |
| unsigned int, whence) |
| _syscall2 (int, getrusage, int, who, struct rusage *, usage) |
| _syscall2 (int, setrlimit, int, resource, const struct rlimit *, rlim) |
| _syscall2 (int, getrlimit, int, resource, struct rlimit *, rlim) |
| _syscall3 (int, sigaction, int signum, const struct sigaction *, act, |
| struct sigaction *, oldact) |
| _syscall0 (uid_t, getuid) |
| _syscall0 (gid_t, getgid) |
| _syscall0 (uid_t, geteuid) |
| _syscall0 (gid_t, getegid) |
| _syscall2 (int, kill, pid_t, pid, int, sig) |
| _syscall3 (_ssize_t, readlink, const char *, path, char *, buf, size_t, bufsize) |
| #endif |