| # cygserver.conf |
| # |
| # Contains configurable parameters for the cygserver. |
| # |
| # The format of this file is easy. Lines beginning with a hash `#' are |
| # comments and ignored. Lines consisting of only whitespaces are ignored. |
| # Any other line is a setting for cygserver. |
| # A setting consists of a name/value pair, separated by whitespace. |
| # Each line must only consist of one name/value pair. |
| # Lines must not be longer than 1023 characters. |
| # |
| # Some settings can be overridden by a command line switch. If so, it's |
| # mentioned below. |
| # |
| # Settings which are commented out will use the default values. These are |
| # mentioned below, too. |
| |
| # kern.srv.cleanup_threads: No. of cygserver threads used for cleanup tasks. |
| # Default: 2, Min: 1, Max: 16, command line option -c, --cleanup-threads |
| #kern.srv.cleanup_threads 2 |
| |
| # kern.srv.request_threads: No. of cygserver threads used to serve |
| # application requests. |
| # Default: 10, Min: 1, Max: 310, command line option -r, --request-threads |
| #kern.srv.request_threads 10 |
| |
| # kern.srv.process_cache_size: No. of concurrent processes which can be handled |
| # by Cygserver concurrently. |
| # Default: 62, Min: 1, Max: 310, command line option -p, --process-cache |
| #kern.srv.process_cache_size 62 |
| |
| # kern.srv.msgqueues: Determines whether XSI Message Queue support should be |
| # started, "yes" (or "true", "y", "t", "1") or "no" (or "false", "n", "f", "0"). |
| # These values are valid for all binary type options. |
| # Default is "yes". Command line option -q, --no-msgqueues |
| #kern.srv.msgqueues yes |
| |
| # kern.srv.semaphores: Determines whether XSI Semaphore support should be |
| # started. Default is "yes". Command line option -s, --no-semaphores |
| #kern.srv.semaphores yes |
| |
| # kern.srv.sharedmem: Determines whether XSI Shared Memory support should be |
| # started. Default is "yes". Command line option -m, --no-sharedmem |
| #kern.srv.sharedmem yes |
| |
| # LOGGING |
| |
| # kern.log.syslog: Determines whether logging should go to the syslog, |
| # Default is "yes", if stderr is no tty, "no" otherwise. |
| # Command line option -y, --syslog or -Y, --no-syslog. |
| #kern.log.syslog no |
| |
| # kern.log.stderr: Determines whether logging should go to stderr, |
| # Default is "yes", if stderr is a tty, "no" otherwise. |
| # Command line option -e, --stderr or -E, --no-stderr. |
| #kern.log.stderr no |
| |
| # kern.log.level: Logging level. Valid values are 1 to 7 with a bigger |
| # value emitting more logging output. Default level is 6. |
| # Command line option -l, --log-level. |
| #kern.log.level 6 |
| |
| # kern.log.debug: Determines whether debug output should be printed to stderr. |
| # Default is "no". Command line option -d, --debug |
| #kern.log.debug no |
| |
| # XSI message queue parameters. |
| # |
| # Each message is broken up and stored in segments that are msgssz bytes |
| # long. For efficiency reasons, this should be a power of two. Also, |
| # it doesn't make sense if it is less than 8 or greater than about 256. |
| |
| # kern.ipc.msgseg: Maximum no. of message queue segments hold concurrently. |
| # Default: 2048, Min: 256, Max: 65535 |
| #kern.ipc.msgseg 2048 |
| |
| # kern.ipc.msgssz: Size of segment in bytes. Must be a power of 2 value. |
| # Default: 8, Min: 8, Max: 1024 |
| #kern.ipc.msgssz 8 |
| |
| # kern.ipc.msgmnb: Maximum no. of bytes in a single message queue. |
| # Default: 2048, Min: 1, Max: 65535 |
| #kern.ipc.msgmnb 2048 |
| |
| # kern.ipc.msgmni: Maximum no. of message queue identifiers hold concurrently. |
| # Default: 40, Min: 1, Max: 1024 |
| #kern.ipc.msgmni 40 |
| |
| # kern.ipc.msgtql: Maximum no. of messages hold concurrently. |
| # Default: 40, Min: 1, Max: 1024 |
| #kern.ipc.msgtql 40 |
| |
| # XSI semaphore parameters |
| |
| # kern.ipc.semmni: Maximum no. of semaphore identifiers hold concurrently. |
| # Default: 10, Min: 1, Max: 1024 |
| #kern.ipc.semmni 10 |
| |
| # kern.ipc.semmns: Maximum no. of semaphores hold concurrently. |
| # Default: 60, Min: 1, Max: 1024 |
| #kern.ipc.semmns 60 |
| |
| # kern.ipc.semmnu: Total no. of undo structures hold by server. |
| # Default: 30, Min: 1, Max: 1024 |
| #kern.ipc.semmnu 30 |
| |
| # kern.ipc.semmsl: Maximum no. of semaphores per semaphore id. |
| # Default: 60, Min: 1, Max: 1024 |
| #kern.ipc.semmsl 60 |
| |
| # kern.ipc.semopm: Maximum no. of operations per semop call. |
| # Default: 100, Min: 1, Max: 1024 |
| #kern.ipc.semopm 100 |
| |
| # kern.ipc.semume: Maximum no. of undo entries per process. |
| # Default: 10, Min: 1, Max: 1024 |
| #kern.ipc.semume 10 |
| |
| # kern.ipc.semvmx: Maximum value of a semaphore. |
| # Default: 32767, Min: 1, Max: 32767 |
| #kern.ipc.semvmx 32767 |
| |
| # kern.ipc.semaem: Maximum value to adjust on process exit. |
| # Default: 16384, Min: 1, Max: 32767 |
| #kern.ipc.semaem 16384 |
| |
| # XSI shared memory parameters |
| |
| # kern.ipc.shmmaxpgs: Maximum pages available for XSI shared memory. |
| # Changing shmmaxpgs immediately affects setting SHMMAX. The relation |
| # between shmmaxpgs and SHMMAX is: SHMMAX = shmmaxpgs * getpagesize(). |
| # Default: 8192, Min: 1, Max: 32767 |
| #kern.ipc.shmmaxpgs 8192 |
| |
| # kern.ipc.shmmni: Maximum number of shared memory segments, system wide. |
| # Default: 192, Min: 1, Max: 32767 |
| #kern.ipc.shmmni 192 |
| |
| # kern.ipc.shmseg: Maximum number of shared memory segments per process. |
| # Default: 128, Min: 1, Max: 32767 |
| #kern.ipc.shmseg 128 |
| |
| # kern.ipc.shm_allow_removed: Determines whether a process is allowed to |
| # attach to a shared memory segment (using the shmat call) after a successful |
| # call to shmctl(IPC_RMID). This is a Linux-specific, and therefore |
| # non-portable feature. Use with care. Default is "no". |
| #kern.ipc.shm_allow_removed no |
