| How to use U-boot on Solid-run mx6 Hummingboard and Cubox-i | |
| ----------------------------------------------------------- | |
| - Build U-boot for Hummingboard/Cubox-i: | |
| $ make mrproper | |
| $ make mx6cuboxi_defconfig | |
| $ make | |
| This will generate the SPL image called SPL and the u-boot.img. | |
| - Flash the SPL image into the SD card: | |
| sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync | |
| - Flash the u-boot.img image into the SD card: | |
| sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync | |
| - Insert the SD card in the board, power it up and U-boot messages should | |
| come up. |