| config DM_ETH | |
| bool "Enable Driver Model for Ethernet drivers" | |
| depends on DM | |
| help | |
| Enable driver model for Ethernet. | |
| The eth_*() interface will be implemented by the UC_ETH class | |
| This is currently implemented in net/eth.c | |
| Look in include/net.h for details. | |
| config PHYLIB | |
| bool "Ethernet PHY (physical media interface) support" | |
| help | |
| Enable Ethernet PHY (physical media interface) support. | |
| menuconfig NETDEVICES | |
| bool "Network device support" | |
| depends on NET | |
| default y if DM_ETH | |
| help | |
| You must select Y to enable any network device support | |
| Generally if you have any networking support this is a given | |
| If unsure, say Y | |
| if NETDEVICES | |
| config ALTERA_TSE | |
| bool "Altera Triple-Speed Ethernet MAC support" | |
| depends on DM_ETH | |
| select PHYLIB | |
| help | |
| This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. | |
| Please find details on the "Triple-Speed Ethernet MegaCore Function | |
| Resource Center" of Altera. | |
| config E1000 | |
| bool "Intel PRO/1000 Gigabit Ethernet support" | |
| help | |
| This driver supports Intel(R) PRO/1000 gigabit ethernet family of | |
| adapters. For more information on how to identify your adapter, go | |
| to the Adapter & Driver ID Guide at: | |
| <http://support.intel.com/support/network/adapter/pro100/21397.htm> | |
| config E1000_SPI_GENERIC | |
| bool "Allow access to the Intel 8257x SPI bus" | |
| depends on E1000 | |
| help | |
| Allow generic access to the SPI bus on the Intel 8257x, for | |
| example with the "sspi" command. | |
| config E1000_SPI | |
| bool "Enable SPI bus utility code" | |
| depends on E1000 | |
| help | |
| Utility code for direct access to the SPI bus on Intel 8257x. | |
| This does not do anything useful unless you set at least one | |
| of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. | |
| config CMD_E1000 | |
| bool "Enable the e1000 command" | |
| depends on E1000 | |
| help | |
| This enables the 'e1000' management command for E1000 devices. When | |
| used on devices with SPI support you can reprogram the EEPROM from | |
| U-Boot. | |
| config ETH_SANDBOX | |
| depends on DM_ETH && SANDBOX | |
| default y | |
| bool "Sandbox: Mocked Ethernet driver" | |
| help | |
| This driver simply responds with fake ARP replies and ping | |
| replies that are used to verify network stack functionality | |
| This driver is particularly useful in the test/dm/eth.c tests | |
| config ETH_SANDBOX_RAW | |
| depends on DM_ETH && SANDBOX | |
| default y | |
| bool "Sandbox: Bridge to Linux Raw Sockets" | |
| help | |
| This driver is a bridge from the bottom of the network stack | |
| in U-Boot to the RAW AF_PACKET API in Linux. This allows real | |
| network traffic to be tested from within sandbox. See | |
| board/sandbox/README.sandbox for more details. | |
| config ETH_DESIGNWARE | |
| bool "Synopsys Designware Ethernet MAC" | |
| select PHYLIB | |
| help | |
| This MAC is present in SoCs from various vendors. It supports | |
| 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to | |
| provide the PHY (physical media interface). | |
| config PCH_GBE | |
| bool "Intel Platform Controller Hub EG20T GMAC driver" | |
| depends on DM_ETH && DM_PCI | |
| select PHYLIB | |
| help | |
| This MAC is present in Intel Platform Controller Hub EG20T. It | |
| supports 10/100/1000 Mbps operation. | |
| config ZYNQ_GEM | |
| depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP) | |
| select PHYLIB | |
| bool "Xilinx Ethernet GEM" | |
| help | |
| This MAC is present in Xilinx Zynq and ZynqMP SoCs. | |
| endif # NETDEVICES |