| /* | 
 |  * Copyright (C) 2012 Samsung Electronics | 
 |  * | 
 |  * Author: InKi Dae <inki.dae@samsung.com> | 
 |  * Author: Donghwa Lee <dh09.lee@samsung.com> | 
 |  * | 
 |  * SPDX-License-Identifier:	GPL-2.0+ | 
 |  */ | 
 |  | 
 | #include <config.h> | 
 | #include <common.h> | 
 | #include <lcd.h> | 
 | #include <fdtdec.h> | 
 | #include <libfdt.h> | 
 | #include <asm/io.h> | 
 | #include <asm/arch/cpu.h> | 
 | #include <asm/arch/clock.h> | 
 | #include <asm/arch/clk.h> | 
 | #include <asm/arch/mipi_dsim.h> | 
 | #include <asm/arch/dp_info.h> | 
 | #include <asm/arch/system.h> | 
 | #include <asm/gpio.h> | 
 | #include <asm-generic/errno.h> | 
 |  | 
 | #include "exynos_fb.h" | 
 |  | 
 | DECLARE_GLOBAL_DATA_PTR; | 
 |  | 
 | static unsigned int panel_width, panel_height; | 
 |  | 
 | #if CONFIG_IS_ENABLED(OF_CONTROL) | 
 | vidinfo_t panel_info  = { | 
 | 	/* | 
 | 	 * Insert a value here so that we don't end up in the BSS | 
 | 	 * Reference: drivers/video/tegra.c | 
 | 	 */ | 
 | 	.vl_col = -1, | 
 | }; | 
 | #endif | 
 |  | 
 | ushort *configuration_get_cmap(void) | 
 | { | 
 | #if defined(CONFIG_LCD_LOGO) | 
 | 	return bmp_logo_palette; | 
 | #else | 
 | 	return NULL; | 
 | #endif | 
 | } | 
 |  | 
 | static void exynos_lcd_init_mem(void *lcdbase, vidinfo_t *vid) | 
 | { | 
 | 	unsigned long palette_size; | 
 | 	unsigned int fb_size; | 
 |  | 
 | 	fb_size = vid->vl_row * vid->vl_col * (NBITS(vid->vl_bpix) >> 3); | 
 |  | 
 | 	palette_size = NBITS(vid->vl_bpix) == 8 ? 256 : 16; | 
 |  | 
 | 	exynos_fimd_lcd_init_mem((unsigned long)lcdbase, | 
 | 			(unsigned long)fb_size, palette_size); | 
 | } | 
 |  | 
 | static void exynos_lcd_init(vidinfo_t *vid) | 
 | { | 
 | 	exynos_fimd_lcd_init(vid); | 
 |  | 
 | 	/* Enable flushing after LCD writes if requested */ | 
 | 	lcd_set_flush_dcache(1); | 
 | } | 
 |  | 
 | __weak void exynos_cfg_lcd_gpio(void) | 
 | { | 
 | } | 
 |  | 
 | __weak void exynos_backlight_on(unsigned int onoff) | 
 | { | 
 | } | 
 |  | 
 | __weak void exynos_reset_lcd(void) | 
 | { | 
 | } | 
 |  | 
 | __weak void exynos_lcd_power_on(void) | 
 | { | 
 | } | 
 |  | 
 | __weak void exynos_cfg_ldo(void) | 
 | { | 
 | } | 
 |  | 
 | __weak void exynos_enable_ldo(unsigned int onoff) | 
 | { | 
 | } | 
 |  | 
 | __weak void exynos_backlight_reset(void) | 
 | { | 
 | } | 
 |  | 
 | __weak int exynos_lcd_misc_init(vidinfo_t *vid) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void lcd_panel_on(vidinfo_t *vid) | 
 | { | 
 | 	struct gpio_desc pwm_out_gpio; | 
 | 	struct gpio_desc bl_en_gpio; | 
 | 	unsigned int node; | 
 |  | 
 | 	udelay(vid->init_delay); | 
 |  | 
 | 	exynos_backlight_reset(); | 
 |  | 
 | 	exynos_cfg_lcd_gpio(); | 
 |  | 
 | 	exynos_lcd_power_on(); | 
 |  | 
 | 	udelay(vid->power_on_delay); | 
 |  | 
 | 	if (vid->dp_enabled) | 
 | 		exynos_init_dp(); | 
 |  | 
 | 	exynos_reset_lcd(); | 
 |  | 
 | 	udelay(vid->reset_delay); | 
 |  | 
 | 	exynos_backlight_on(1); | 
 |  | 
 | #if CONFIG_IS_ENABLED(OF_CONTROL) | 
 | 	node = fdtdec_next_compatible(gd->fdt_blob, 0, | 
 | 						COMPAT_SAMSUNG_EXYNOS_FIMD); | 
 | 	if (node <= 0) { | 
 | 		debug("FIMD: Can't get device node for FIMD\n"); | 
 | 		return; | 
 | 	} | 
 | 	gpio_request_by_name_nodev(gd->fdt_blob, node, "samsung,pwm-out-gpio", | 
 | 				   0, &pwm_out_gpio, | 
 | 				   GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); | 
 |  | 
 | 	gpio_request_by_name_nodev(gd->fdt_blob, node, "samsung,bl-en-gpio", 0, | 
 | 				   &bl_en_gpio, | 
 | 				   GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); | 
 |  | 
 | #endif | 
 | 	exynos_cfg_ldo(); | 
 |  | 
 | 	exynos_enable_ldo(1); | 
 |  | 
 | 	if (vid->mipi_enabled) | 
 | 		exynos_mipi_dsi_init(); | 
 | } | 
 |  | 
 | #if CONFIG_IS_ENABLED(OF_CONTROL) | 
 | int exynos_lcd_early_init(const void *blob) | 
 | { | 
 | 	unsigned int node; | 
 | 	node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS_FIMD); | 
 | 	if (node <= 0) { | 
 | 		debug("exynos_fb: Can't get device node for fimd\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	panel_info.vl_col = fdtdec_get_int(blob, node, "samsung,vl-col", 0); | 
 | 	if (panel_info.vl_col == 0) { | 
 | 		debug("Can't get XRES\n"); | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	panel_info.vl_row = fdtdec_get_int(blob, node, "samsung,vl-row", 0); | 
 | 	if (panel_info.vl_row == 0) { | 
 | 		debug("Can't get YRES\n"); | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	panel_info.vl_width = fdtdec_get_int(blob, node, | 
 | 						"samsung,vl-width", 0); | 
 |  | 
 | 	panel_info.vl_height = fdtdec_get_int(blob, node, | 
 | 						"samsung,vl-height", 0); | 
 |  | 
 | 	panel_info.vl_freq = fdtdec_get_int(blob, node, "samsung,vl-freq", 0); | 
 | 	if (panel_info.vl_freq == 0) { | 
 | 		debug("Can't get refresh rate\n"); | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	if (fdtdec_get_bool(blob, node, "samsung,vl-clkp")) | 
 | 		panel_info.vl_clkp = CONFIG_SYS_LOW; | 
 |  | 
 | 	if (fdtdec_get_bool(blob, node, "samsung,vl-oep")) | 
 | 		panel_info.vl_oep = CONFIG_SYS_LOW; | 
 |  | 
 | 	if (fdtdec_get_bool(blob, node, "samsung,vl-hsp")) | 
 | 		panel_info.vl_hsp = CONFIG_SYS_LOW; | 
 |  | 
 | 	if (fdtdec_get_bool(blob, node, "samsung,vl-vsp")) | 
 | 		panel_info.vl_vsp = CONFIG_SYS_LOW; | 
 |  | 
 | 	if (fdtdec_get_bool(blob, node, "samsung,vl-dp")) | 
 | 		panel_info.vl_dp = CONFIG_SYS_LOW; | 
 |  | 
 | 	panel_info.vl_bpix = fdtdec_get_int(blob, node, "samsung,vl-bpix", 0); | 
 | 	if (panel_info.vl_bpix == 0) { | 
 | 		debug("Can't get bits per pixel\n"); | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	panel_info.vl_hspw = fdtdec_get_int(blob, node, "samsung,vl-hspw", 0); | 
 | 	if (panel_info.vl_hspw == 0) { | 
 | 		debug("Can't get hsync width\n"); | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	panel_info.vl_hfpd = fdtdec_get_int(blob, node, "samsung,vl-hfpd", 0); | 
 | 	if (panel_info.vl_hfpd == 0) { | 
 | 		debug("Can't get right margin\n"); | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	panel_info.vl_hbpd = (u_char)fdtdec_get_int(blob, node, | 
 | 							"samsung,vl-hbpd", 0); | 
 | 	if (panel_info.vl_hbpd == 0) { | 
 | 		debug("Can't get left margin\n"); | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	panel_info.vl_vspw = (u_char)fdtdec_get_int(blob, node, | 
 | 							"samsung,vl-vspw", 0); | 
 | 	if (panel_info.vl_vspw == 0) { | 
 | 		debug("Can't get vsync width\n"); | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	panel_info.vl_vfpd = fdtdec_get_int(blob, node, | 
 | 							"samsung,vl-vfpd", 0); | 
 | 	if (panel_info.vl_vfpd == 0) { | 
 | 		debug("Can't get lower margin\n"); | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	panel_info.vl_vbpd = fdtdec_get_int(blob, node, "samsung,vl-vbpd", 0); | 
 | 	if (panel_info.vl_vbpd == 0) { | 
 | 		debug("Can't get upper margin\n"); | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	panel_info.vl_cmd_allow_len = fdtdec_get_int(blob, node, | 
 | 						"samsung,vl-cmd-allow-len", 0); | 
 |  | 
 | 	panel_info.win_id = fdtdec_get_int(blob, node, "samsung,winid", 0); | 
 | 	panel_info.init_delay = fdtdec_get_int(blob, node, | 
 | 						"samsung,init-delay", 0); | 
 | 	panel_info.power_on_delay = fdtdec_get_int(blob, node, | 
 | 						"samsung,power-on-delay", 0); | 
 | 	panel_info.reset_delay = fdtdec_get_int(blob, node, | 
 | 						"samsung,reset-delay", 0); | 
 | 	panel_info.interface_mode = fdtdec_get_int(blob, node, | 
 | 						"samsung,interface-mode", 0); | 
 | 	panel_info.mipi_enabled = fdtdec_get_int(blob, node, | 
 | 						"samsung,mipi-enabled", 0); | 
 | 	panel_info.dp_enabled = fdtdec_get_int(blob, node, | 
 | 						"samsung,dp-enabled", 0); | 
 | 	panel_info.cs_setup = fdtdec_get_int(blob, node, | 
 | 						"samsung,cs-setup", 0); | 
 | 	panel_info.wr_setup = fdtdec_get_int(blob, node, | 
 | 						"samsung,wr-setup", 0); | 
 | 	panel_info.wr_act = fdtdec_get_int(blob, node, "samsung,wr-act", 0); | 
 | 	panel_info.wr_hold = fdtdec_get_int(blob, node, "samsung,wr-hold", 0); | 
 |  | 
 | 	panel_info.logo_on = fdtdec_get_int(blob, node, "samsung,logo-on", 0); | 
 | 	if (panel_info.logo_on) { | 
 | 		panel_info.logo_width = fdtdec_get_int(blob, node, | 
 | 						"samsung,logo-width", 0); | 
 | 		panel_info.logo_height = fdtdec_get_int(blob, node, | 
 | 						"samsung,logo-height", 0); | 
 | 		panel_info.logo_addr = fdtdec_get_int(blob, node, | 
 | 						"samsung,logo-addr", 0); | 
 | 	} | 
 |  | 
 | 	panel_info.rgb_mode = fdtdec_get_int(blob, node, | 
 | 						"samsung,rgb-mode", 0); | 
 | 	panel_info.pclk_name = fdtdec_get_int(blob, node, | 
 | 						"samsung,pclk-name", 0); | 
 | 	panel_info.sclk_div = fdtdec_get_int(blob, node, | 
 | 						"samsung,sclk-div", 0); | 
 | 	panel_info.dual_lcd_enabled = fdtdec_get_int(blob, node, | 
 | 						"samsung,dual-lcd-enabled", 0); | 
 |  | 
 | 	return 0; | 
 | } | 
 | #endif | 
 |  | 
 | void lcd_ctrl_init(void *lcdbase) | 
 | { | 
 | 	set_system_display_ctrl(); | 
 | 	set_lcd_clk(); | 
 |  | 
 | #if CONFIG_IS_ENABLED(OF_CONTROL) | 
 | #ifdef CONFIG_EXYNOS_MIPI_DSIM | 
 | 	exynos_init_dsim_platform_data(&panel_info); | 
 | #endif | 
 | 	exynos_lcd_misc_init(&panel_info); | 
 | #else | 
 | 	/* initialize parameters which is specific to panel. */ | 
 | 	init_panel_info(&panel_info); | 
 | #endif | 
 |  | 
 | 	panel_width = panel_info.vl_width; | 
 | 	panel_height = panel_info.vl_height; | 
 |  | 
 | 	exynos_lcd_init_mem(lcdbase, &panel_info); | 
 |  | 
 | 	exynos_lcd_init(&panel_info); | 
 | } | 
 |  | 
 | void lcd_enable(void) | 
 | { | 
 | 	if (panel_info.logo_on) { | 
 | 		memset((void *) gd->fb_base, 0, panel_width * panel_height * | 
 | 				(NBITS(panel_info.vl_bpix) >> 3)); | 
 | 	} | 
 |  | 
 | 	lcd_panel_on(&panel_info); | 
 | } | 
 |  | 
 | /* dummy function */ | 
 | void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) | 
 | { | 
 | 	return; | 
 | } |