include/configs/ipq807x.h - manifest_repos/bootloader - Git at Google

 /*
  * Copyright (c) 2016-2017 The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #ifndef _IPQCDP_H
 #define _IPQCDP_H

 #ifndef DO_DEPS_ONLY
 #include <generated/asm-offsets.h>
 #endif

 /*
  * Support for IPQ807X RUMI
  */
 #define CONFIG_IPQ_RUMI

 /*
  * Disabled for actual chip.
  * #define CONFIG_RUMI
  */

 #define CONFIG_CMD_AES
 #define CONFIG_CMD_AES_256

 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_IPQ_NO_RELOC
 #define CONFIG_BOARD_LATE_INIT
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_CACHELINE_SIZE   64
 #define CONFIG_SYS_VSNPRINTF

 #define CONFIG_SYS_NONCACHED_MEMORY     (1 << 20)

 #define CONFIG_IPQ807X_UART
 #define CONFIG_NR_DRAM_BANKS            1
 #define CONFIG_SKIP_LOWLEVEL_INIT

 #define CONFIG_SYS_BOOTM_LEN            (64 << 20)
 #define HAVE_BLOCK_DEVICE
 /*
  * Size of malloc() pool
  */

 /*
  * select serial console configuration
  */
 #define CONFIG_CONS_INDEX               1
 #define CONFIG_SYS_DEVICE_NULLDEV

 /* allow to overwrite serial and ethaddr */
 #define CONFIG_BAUDRATE                 115200
 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
 								115200}

 #define CONFIG_SYS_CBSIZE               (512 * 2) /* Console I/O Buffer Size */

 /*

           svc_sp     --> --------------
           irq_sp     --> |            |
 	  fiq_sp     --> |            |
 	  bd         --> |            |
           gd         --> |            |
           pgt        --> |            |
           malloc     --> |            |
           text_base  --> |------------|
 */

 #ifdef CONFIG_IPQ807x_I2C
 #define CONFIG_SYS_I2C_QUP
 #define CONFIG_CMD_I2C
 #define CONFIG_DM_I2C
 #endif

 #define CONFIG_SYS_INIT_SP_ADDR 	(CONFIG_SYS_TEXT_BASE -\
 			CONFIG_SYS_MALLOC_LEN - CONFIG_ENV_SIZE -\
 			GENERATED_BD_INFO_SIZE)

 #define CONFIG_SYS_MAXARGS              16
 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 						sizeof(CONFIG_SYS_PROMPT) + 16)

 #define TLMM_BASE			0x01000000
 #define GPIO_CONFIG_ADDR(x)		(TLMM_BASE + (x)*0x1000)
 #define GPIO_IN_OUT_ADDR(x)		(TLMM_BASE + 0x4 + (x)*0x1000)

 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 #define CONFIG_SYS_TEXT_BASE            0x4A900000
 #define CONFIG_SYS_SDRAM_SIZE           0x10000000
 #define CONFIG_MAX_RAM_BANK_SIZE        CONFIG_SYS_SDRAM_SIZE
 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + (64 << 20))
 #define CONFIG_ROOTFS_LOAD_ADDR         (CONFIG_SYS_SDRAM_BASE + (32 << 20))

 #define QCA_KERNEL_START_ADDR		CONFIG_SYS_SDRAM_BASE
 #define QCA_DRAM_KERNEL_SIZE		CONFIG_SYS_SDRAM_SIZE
 #define QCA_BOOT_PARAMS_ADDR		(QCA_KERNEL_START_ADDR + 0x100)

 #define CONFIG_OF_COMBINE		1

 #define CONFIG_QCA_UBOOT_OFFSET		0xA600000
 #define CONFIG_UBOOT_END_ADDR		0x4AA00000
 #define CONFIG_QCA_SMEM_BASE		0x4AB00000

 #define CONFIG_IPQ_FDT_HIGH		0x4A400000
 #define CONFIG_IPQ_NO_MACS		6
 #define CONFIG_ENV_IS_IN_SPI_FLASH	1
 #define CONFIG_ENV_SECT_SIZE        	(64 * 1024)

 #define CONFIG_SMP_CMD_SUPPORT

 #ifdef CONFIG_SMP_CMD_SUPPORT
 #define NR_CPUS				4
 #endif
 /*
  * IPQ_TFTP_MIN_ADDR: Starting address of Linux HLOS region.
  * CONFIG_TZ_END_ADDR: Ending address of Trust Zone and starting
  * address of WLAN Area.
  * TFTP file can only be written in Linux HLOS region and WLAN AREA.
  */
 #define IPQ_TFTP_MIN_ADDR		(CONFIG_SYS_SDRAM_BASE + (16 << 20))
 #define CONFIG_TZ_END_ADDR		(CONFIG_SYS_SDRAM_BASE + (88 << 21))
 #define CONFIG_SYS_SDRAM_END	((long long)CONFIG_SYS_SDRAM_BASE + gd->ram_size)

 #ifndef __ASSEMBLY__
 #include <compiler.h>
 extern loff_t board_env_offset;
 extern loff_t board_env_range;
 extern loff_t board_env_size;
 #endif

 #define CONFIG_IPQ807X_ENV		1
 #define CONFIG_ENV_OFFSET		board_env_offset
 #define CONFIG_ENV_SIZE			CONFIG_ENV_SIZE_MAX
 #define CONFIG_ENV_RANGE		board_env_range
 #define CONFIG_ENV_SIZE_MAX		(256 << 10) /* 256 KB */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE_MAX + (1024 << 10))

 #define CONFIG_ENV_IS_IN_NAND		1
 #define CONFIG_FLASH_PROTECT
 #define CONFIG_CMD_FLASHWRITE

 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE

 /*
 * SPI Flash Configs
 */
 #define CONFIG_QCA_SPI
 #define CONFIG_SPI_FLASH
 #define CONFIG_CMD_SF
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SPI_FLASH_WINBOND
 #define CONFIG_SPI_FLASH_MACRONIX
 #define CONFIG_SPI_FLASH_GIGADEVICE
 #define CONFIG_SF_DEFAULT_BUS	0
 #define CONFIG_SF_DEFAULT_CS	0
 #define CONFIG_SF_DEFAULT_MODE	SPI_MODE_0
 #define CONFIG_SF_DEFAULT_SPEED	(48 * 1000 * 1000)
 #define CONFIG_SPI_FLASH_BAR	1
 #define CONFIG_SPI_FLASH_USE_4K_SECTORS
 #define CONFIG_IPQ_4B_ADDR_SWITCH_REQD

 #define CONFIG_EFI_PARTITION
 #define CONFIG_QCA_BAM			1

 /*
  * MMC configs
  */
 #define CONFIG_QCA_MMC

 #ifdef CONFIG_QCA_MMC
 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_SDHCI
 #define CONFIG_SDHCI_QCA
 #define CONFIG_EFI_PARTITION
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV	0
 #define CONFIG_SDHCI_SUPPORT
 #define CONFIG_MMC_ADMA
 #endif

 /*
  * NAND Flash Configs
  */

 /* CONFIG_QPIC_NAND: QPIC NAND in BAM mode
  * CONFIG_IPQ_NAND: QPIC NAND in FIFO/block mode.
  * BAM is enabled by default.
  */
 #define CONFIG_QPIC_NAND
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_YAFFS
 #define CONFIG_SYS_NAND_SELF_INIT
 #define CONFIG_SYS_NAND_ONFI_DETECTION

 /*
  * Expose SPI driver as a pseudo NAND driver to make use
  * of U-Boot's MTD framework.
  */
 #define CONFIG_SYS_MAX_NAND_DEVICE	CONFIG_IPQ_MAX_NAND_DEVICE + \
 					CONFIG_IPQ_MAX_SPI_DEVICE

 #define CONFIG_IPQ_MAX_NAND_DEVICE	1
 #define CONFIG_IPQ_MAX_SPI_DEVICE	1

 #define CONFIG_QPIC_NAND_NAND_INFO_IDX	0
 #define CONFIG_IPQ_SPI_NOR_INFO_IDX	1

 #define CONFIG_NAND_FLASH_INFO_IDX	CONFIG_QPIC_NAND_NAND_INFO_IDX
 #define CONFIG_SPI_FLASH_INFO_IDX	CONFIG_IPQ_SPI_NOR_INFO_IDX

 #define QCA_SPI_NOR_DEVICE		"spi0.0"
 #define CONFIG_QUP_SPI_USE_DMA		1

 /*
  * U-Boot Env Configs
  */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_CMD_XIMG

 /* MTEST */
 #define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x1300000
 #define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_MEMTEST_START + 0x100

 /* NSS firmware loaded using bootm */
 #define CONFIG_BOOTCOMMAND  "bootipq"
 #define CONFIG_BOOTARGS "console=ttyMSM0,115200n8"
 #define QCA_ROOT_FS_PART_NAME "rootfs"

 #define CONFIG_BOOTDELAY	2

 #define CONFIG_MTD_DEVICE
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define NUM_ALT_PARTITION	16

 #define CONFIG_CMD_UBI
 #define CONFIG_RBTREE

 #define CONFIG_CMD_BOOTZ

 #define CONFIG_OF_BOARD_SETUP

 #ifdef CONFIG_OF_BOARD_SETUP
 #define DLOAD_DISABLE		0x1
 #define RESERVE_ADDRESS_START	0x4AB00000 /*TZAPPS, SMEM and TZ Regions */
 #define RESERVE_ADDRESS_SIZE	0x5500000

 /*
  * Below Configs need to be updated after enabling reset_crashdump
  * Included now to avoid build failure
  */
 #define SET_MAGIC				0x1
 #define CLEAR_MAGIC				0x0
 #define SCM_CMD_TZ_CONFIG_HW_FOR_RAM_DUMP_ID	0x9
 #define SCM_CMD_TZ_FORCE_DLOAD_ID		0x10
 #define SCM_CMD_TZ_PSHOLD			0x16
 #define BOOT_VERSION				0
 #define TZ_VERSION				1
 #define RPM_VERSION				3
 #endif

 #define CONFIG_FDT_FIXUP_PARTITIONS

 /*
  * USB Support
  */
 #ifdef CONFIG_USB_XHCI_IPQ
 #define CONFIG_USB_XHCI
 #define CONFIG_USB_XHCI_DWC3
 #define CONFIG_CMD_USB
 #define CONFIG_DOS_PARTITION
 #define CONFIG_USB_STORAGE
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 #endif

 #define PCI_MAX_DEVICES	2
 #ifdef CONFIG_PCI_IPQ
 #define CONFIG_PCI
 #define CONFIG_CMD_PCI
 #define CONFIG_PCI_SCAN_SHOW
 #endif

 #define CONFIG_IPQ807X_EDMA		1
 #define CONFIG_IPQ807X_BRIDGED_MODE	1
 #define CONFIG_NET_RETRY_COUNT		5
 #define CONFIG_SYS_RX_ETH_BUFFER	16
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_MII
 #define CONFIG_CMD_MII
 #define CONFIG_IPADDR	192.168.10.10
 #define CONFIG_NETMASK	255.255.255.0
 #define CONFIG_SERVERIP	192.168.10.1
 #define CONFIG_CMD_TFTPPUT
 #define CONFIG_IPQ_MDIO			1
 #define CONFIG_IPQ_ETH_INIT_DEFER

 /*
  * CRASH DUMP ENABLE
  */
 #define CONFIG_QCA_APPSBL_DLOAD

 #ifdef CONFIG_QCA_APPSBL_DLOAD
 #define CONFIG_CMD_TFTPPUT
 /* We will be uploading very big files */
 #undef CONFIG_NET_RETRY_COUNT
 #define CONFIG_NET_RETRY_COUNT  500

 #define IPQ_TEMP_DUMP_ADDR 0x44000000
 #endif

 #define CONFIG_QCA_KERNEL_CRASHDUMP_ADDRESS	*((unsigned int *)0x08600658)
 #define TLV_BUF_OFFSET				500 * 1024
 #define CONFIG_CPU_CONTEXT_DUMP_SIZE		4096
 #define CONFIG_TLV_DUMP_SIZE			12 * 1024


 /* L1 cache line size is 64 bytes, L2 cache line size is 128 bytes
  * Cache flush and invalidation based on L1 cache, so the cache line
  * size is configured to 64 */
 #define CONFIG_SYS_CACHELINE_SIZE  64

 /* Enabling this flag will report any L2 errors.
  * By default we are disabling it */
 /*#define CONFIG_IPQ_REPORT_L2ERR*/

 /*
  * Other commands
  */

 #define CONFIG_CMD_RUN
 #define CONFIG_ARMV7_PSCI
 #undef CONFIG_IPQ_ROOTFS_AUTH
 #define CONFIG_SILENT_CONSOLE

 #endif /* _IPQCDP_H */
	/*
	* Copyright (c) 2016-2017 The Linux Foundation. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#ifndef _IPQCDP_H
	#define _IPQCDP_H

	#ifndef DO_DEPS_ONLY
	#include <generated/asm-offsets.h>
	#endif

	/*
	* Support for IPQ807X RUMI
	*/
	#define CONFIG_IPQ_RUMI

	/*
	* Disabled for actual chip.
	* #define CONFIG_RUMI
	*/

	#define CONFIG_CMD_AES
	#define CONFIG_CMD_AES_256

	#define CONFIG_BOARD_EARLY_INIT_F
	#define CONFIG_IPQ_NO_RELOC
	#define CONFIG_BOARD_LATE_INIT
	#define CONFIG_SYS_NO_FLASH
	#define CONFIG_SYS_CACHELINE_SIZE 64
	#define CONFIG_SYS_VSNPRINTF

	#define CONFIG_SYS_NONCACHED_MEMORY (1 << 20)

	#define CONFIG_IPQ807X_UART
	#define CONFIG_NR_DRAM_BANKS 1
	#define CONFIG_SKIP_LOWLEVEL_INIT

	#define CONFIG_SYS_BOOTM_LEN (64 << 20)
	#define HAVE_BLOCK_DEVICE
	/*
	* Size of malloc() pool
	*/

	/*
	* select serial console configuration
	*/
	#define CONFIG_CONS_INDEX 1
	#define CONFIG_SYS_DEVICE_NULLDEV

	/* allow to overwrite serial and ethaddr */
	#define CONFIG_BAUDRATE 115200
	#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
	115200}

	#define CONFIG_SYS_CBSIZE (512 * 2) /* Console I/O Buffer Size */

	/*

	svc_sp --> --------------
	irq_sp --> \| \|
	fiq_sp --> \| \|
	bd --> \| \|
	gd --> \| \|
	pgt --> \| \|
	malloc --> \| \|
	text_base --> \|------------\|
	*/

	#ifdef CONFIG_IPQ807x_I2C
	#define CONFIG_SYS_I2C_QUP
	#define CONFIG_CMD_I2C
	#define CONFIG_DM_I2C
	#endif

	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE -\
	CONFIG_SYS_MALLOC_LEN - CONFIG_ENV_SIZE -\
	GENERATED_BD_INFO_SIZE)

	#define CONFIG_SYS_MAXARGS 16
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	sizeof(CONFIG_SYS_PROMPT) + 16)

	#define TLMM_BASE 0x01000000
	#define GPIO_CONFIG_ADDR(x) (TLMM_BASE + (x)*0x1000)
	#define GPIO_IN_OUT_ADDR(x) (TLMM_BASE + 0x4 + (x)*0x1000)

	#define CONFIG_SYS_SDRAM_BASE 0x40000000
	#define CONFIG_SYS_TEXT_BASE 0x4A900000
	#define CONFIG_SYS_SDRAM_SIZE 0x10000000
	#define CONFIG_MAX_RAM_BANK_SIZE CONFIG_SYS_SDRAM_SIZE
	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + (64 << 20))
	#define CONFIG_ROOTFS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + (32 << 20))

	#define QCA_KERNEL_START_ADDR CONFIG_SYS_SDRAM_BASE
	#define QCA_DRAM_KERNEL_SIZE CONFIG_SYS_SDRAM_SIZE
	#define QCA_BOOT_PARAMS_ADDR (QCA_KERNEL_START_ADDR + 0x100)

	#define CONFIG_OF_COMBINE 1

	#define CONFIG_QCA_UBOOT_OFFSET 0xA600000
	#define CONFIG_UBOOT_END_ADDR 0x4AA00000
	#define CONFIG_QCA_SMEM_BASE 0x4AB00000

	#define CONFIG_IPQ_FDT_HIGH 0x4A400000
	#define CONFIG_IPQ_NO_MACS 6
	#define CONFIG_ENV_IS_IN_SPI_FLASH 1
	#define CONFIG_ENV_SECT_SIZE (64 * 1024)

	#define CONFIG_SMP_CMD_SUPPORT

	#ifdef CONFIG_SMP_CMD_SUPPORT
	#define NR_CPUS 4
	#endif
	/*
	* IPQ_TFTP_MIN_ADDR: Starting address of Linux HLOS region.
	* CONFIG_TZ_END_ADDR: Ending address of Trust Zone and starting
	* address of WLAN Area.
	* TFTP file can only be written in Linux HLOS region and WLAN AREA.
	*/
	#define IPQ_TFTP_MIN_ADDR (CONFIG_SYS_SDRAM_BASE + (16 << 20))
	#define CONFIG_TZ_END_ADDR (CONFIG_SYS_SDRAM_BASE + (88 << 21))
	#define CONFIG_SYS_SDRAM_END ((long long)CONFIG_SYS_SDRAM_BASE + gd->ram_size)

	#ifndef __ASSEMBLY__
	#include <compiler.h>
	extern loff_t board_env_offset;
	extern loff_t board_env_range;
	extern loff_t board_env_size;
	#endif

	#define CONFIG_IPQ807X_ENV 1
	#define CONFIG_ENV_OFFSET board_env_offset
	#define CONFIG_ENV_SIZE CONFIG_ENV_SIZE_MAX
	#define CONFIG_ENV_RANGE board_env_range
	#define CONFIG_ENV_SIZE_MAX (256 << 10) /* 256 KB */
	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE_MAX + (1024 << 10))

	#define CONFIG_ENV_IS_IN_NAND 1
	#define CONFIG_FLASH_PROTECT
	#define CONFIG_CMD_FLASHWRITE

	/* Allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE

	/*
	* SPI Flash Configs
	*/
	#define CONFIG_QCA_SPI
	#define CONFIG_SPI_FLASH
	#define CONFIG_CMD_SF
	#define CONFIG_SPI_FLASH_STMICRO
	#define CONFIG_SPI_FLASH_WINBOND
	#define CONFIG_SPI_FLASH_MACRONIX
	#define CONFIG_SPI_FLASH_GIGADEVICE
	#define CONFIG_SF_DEFAULT_BUS 0
	#define CONFIG_SF_DEFAULT_CS 0
	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	#define CONFIG_SF_DEFAULT_SPEED (48 * 1000 * 1000)
	#define CONFIG_SPI_FLASH_BAR 1
	#define CONFIG_SPI_FLASH_USE_4K_SECTORS
	#define CONFIG_IPQ_4B_ADDR_SWITCH_REQD

	#define CONFIG_EFI_PARTITION
	#define CONFIG_QCA_BAM 1

	/*
	* MMC configs
	*/
	#define CONFIG_QCA_MMC

	#ifdef CONFIG_QCA_MMC
	#define CONFIG_MMC
	#define CONFIG_CMD_MMC
	#define CONFIG_GENERIC_MMC
	#define CONFIG_SDHCI
	#define CONFIG_SDHCI_QCA
	#define CONFIG_EFI_PARTITION
	#define CONFIG_ENV_IS_IN_MMC
	#define CONFIG_SYS_MMC_ENV_DEV 0
	#define CONFIG_SDHCI_SUPPORT
	#define CONFIG_MMC_ADMA
	#endif

	/*
	* NAND Flash Configs
	*/

	/* CONFIG_QPIC_NAND: QPIC NAND in BAM mode
	* CONFIG_IPQ_NAND: QPIC NAND in FIFO/block mode.
	* BAM is enabled by default.
	*/
	#define CONFIG_QPIC_NAND
	#define CONFIG_CMD_NAND
	#define CONFIG_CMD_NAND_YAFFS
	#define CONFIG_SYS_NAND_SELF_INIT
	#define CONFIG_SYS_NAND_ONFI_DETECTION

	/*
	* Expose SPI driver as a pseudo NAND driver to make use
	* of U-Boot's MTD framework.
	*/
	#define CONFIG_SYS_MAX_NAND_DEVICE CONFIG_IPQ_MAX_NAND_DEVICE + \
	CONFIG_IPQ_MAX_SPI_DEVICE

	#define CONFIG_IPQ_MAX_NAND_DEVICE 1
	#define CONFIG_IPQ_MAX_SPI_DEVICE 1

	#define CONFIG_QPIC_NAND_NAND_INFO_IDX 0
	#define CONFIG_IPQ_SPI_NOR_INFO_IDX 1

	#define CONFIG_NAND_FLASH_INFO_IDX CONFIG_QPIC_NAND_NAND_INFO_IDX
	#define CONFIG_SPI_FLASH_INFO_IDX CONFIG_IPQ_SPI_NOR_INFO_IDX

	#define QCA_SPI_NOR_DEVICE "spi0.0"
	#define CONFIG_QUP_SPI_USE_DMA 1

	/*
	* U-Boot Env Configs
	*/
	#define CONFIG_OF_LIBFDT 1
	#define CONFIG_SYS_HUSH_PARSER
	#define CONFIG_CMD_XIMG

	/* MTEST */
	#define CONFIG_CMD_MEMTEST
	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x1300000
	#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + 0x100

	/* NSS firmware loaded using bootm */
	#define CONFIG_BOOTCOMMAND "bootipq"
	#define CONFIG_BOOTARGS "console=ttyMSM0,115200n8"
	#define QCA_ROOT_FS_PART_NAME "rootfs"

	#define CONFIG_BOOTDELAY 2

	#define CONFIG_MTD_DEVICE
	#define CONFIG_CMD_MTDPARTS
	#define CONFIG_MTD_PARTITIONS
	#define NUM_ALT_PARTITION 16

	#define CONFIG_CMD_UBI
	#define CONFIG_RBTREE

	#define CONFIG_CMD_BOOTZ

	#define CONFIG_OF_BOARD_SETUP

	#ifdef CONFIG_OF_BOARD_SETUP
	#define DLOAD_DISABLE 0x1
	#define RESERVE_ADDRESS_START 0x4AB00000 /TZAPPS, SMEM and TZ Regions /
	#define RESERVE_ADDRESS_SIZE 0x5500000

	/*
	* Below Configs need to be updated after enabling reset_crashdump
	* Included now to avoid build failure
	*/
	#define SET_MAGIC 0x1
	#define CLEAR_MAGIC 0x0
	#define SCM_CMD_TZ_CONFIG_HW_FOR_RAM_DUMP_ID 0x9
	#define SCM_CMD_TZ_FORCE_DLOAD_ID 0x10
	#define SCM_CMD_TZ_PSHOLD 0x16
	#define BOOT_VERSION 0
	#define TZ_VERSION 1
	#define RPM_VERSION 3
	#endif

	#define CONFIG_FDT_FIXUP_PARTITIONS

	/*
	* USB Support
	*/
	#ifdef CONFIG_USB_XHCI_IPQ
	#define CONFIG_USB_XHCI
	#define CONFIG_USB_XHCI_DWC3
	#define CONFIG_CMD_USB
	#define CONFIG_DOS_PARTITION
	#define CONFIG_USB_STORAGE
	#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	#endif

	#define PCI_MAX_DEVICES 2
	#ifdef CONFIG_PCI_IPQ
	#define CONFIG_PCI
	#define CONFIG_CMD_PCI
	#define CONFIG_PCI_SCAN_SHOW
	#endif

	#define CONFIG_IPQ807X_EDMA 1
	#define CONFIG_IPQ807X_BRIDGED_MODE 1
	#define CONFIG_NET_RETRY_COUNT 5
	#define CONFIG_SYS_RX_ETH_BUFFER 16
	#define CONFIG_CMD_PING
	#define CONFIG_CMD_DHCP
	#define CONFIG_MII
	#define CONFIG_CMD_MII
	#define CONFIG_IPADDR 192.168.10.10
	#define CONFIG_NETMASK 255.255.255.0
	#define CONFIG_SERVERIP 192.168.10.1
	#define CONFIG_CMD_TFTPPUT
	#define CONFIG_IPQ_MDIO 1
	#define CONFIG_IPQ_ETH_INIT_DEFER

	/*
	* CRASH DUMP ENABLE
	*/
	#define CONFIG_QCA_APPSBL_DLOAD

	#ifdef CONFIG_QCA_APPSBL_DLOAD
	#define CONFIG_CMD_TFTPPUT
	/* We will be uploading very big files */
	#undef CONFIG_NET_RETRY_COUNT
	#define CONFIG_NET_RETRY_COUNT 500

	#define IPQ_TEMP_DUMP_ADDR 0x44000000
	#endif

	#define CONFIG_QCA_KERNEL_CRASHDUMP_ADDRESS ((unsigned int )0x08600658)
	#define TLV_BUF_OFFSET 500 * 1024
	#define CONFIG_CPU_CONTEXT_DUMP_SIZE 4096
	#define CONFIG_TLV_DUMP_SIZE 12 * 1024


	/* L1 cache line size is 64 bytes, L2 cache line size is 128 bytes
	* Cache flush and invalidation based on L1 cache, so the cache line
	* size is configured to 64 */
	#define CONFIG_SYS_CACHELINE_SIZE 64

	/* Enabling this flag will report any L2 errors.
	* By default we are disabling it */
	/#define CONFIG_IPQ_REPORT_L2ERR/

	/*
	* Other commands
	*/

	#define CONFIG_CMD_RUN
	#define CONFIG_ARMV7_PSCI
	#undef CONFIG_IPQ_ROOTFS_AUTH
	#define CONFIG_SILENT_CONSOLE

	#endif /* _IPQCDP_H */