| /* | 
 |  * Copyright (C) 2013 Seco S.r.l | 
 |  * | 
 |  * Configuration settings for the Seco Boards. | 
 |  * | 
 |  * SPDX-License-Identifier:	GPL-2.0+ | 
 |  */ | 
 |  | 
 | #ifndef __CONFIG_H | 
 | #define __CONFIG_H | 
 |  | 
 | #include "mx6_common.h" | 
 |  | 
 | #define CONFIG_BOARD_REVISION_TAG | 
 |  | 
 | /* Size of malloc() pool */ | 
 | #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M) | 
 |  | 
 | #define CONFIG_BOARD_EARLY_INIT_F | 
 |  | 
 | #define CONFIG_MXC_UART | 
 | #define CONFIG_MXC_UART_BASE		UART2_BASE | 
 |  | 
 | /* Command definition */ | 
 | #define CONFIG_CMD_BMODE | 
 |  | 
 | #define CONFIG_SYS_MEMTEST_START	0x10000000 | 
 | #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) | 
 |  | 
 | /* MMC Configuration */ | 
 | #define CONFIG_SYS_FSL_USDHC_NUM        2 | 
 | #define CONFIG_SYS_FSL_ESDHC_ADDR	0 | 
 |  | 
 | /* Ethernet Configuration */ | 
 | #define CONFIG_CMD_PING | 
 | #define CONFIG_CMD_DHCP | 
 | #define CONFIG_CMD_MII | 
 | #define CONFIG_FEC_MXC | 
 | #define CONFIG_MII | 
 | #define IMX_FEC_BASE			ENET_BASE_ADDR | 
 | #define CONFIG_FEC_XCV_TYPE		RGMII | 
 | #define CONFIG_ETHPRIME			"FEC" | 
 | #define CONFIG_FEC_MXC_PHYADDR		6 | 
 | #define CONFIG_PHYLIB | 
 | #define CONFIG_PHY_MICREL | 
 |  | 
 | #define CONFIG_EXTRA_ENV_SETTINGS					\ | 
 | 	"netdev=eth0\0"							\ | 
 | 	"ethprime=FEC0\0"						\ | 
 | 	"netdev=eth0\0"							\ | 
 | 	"ethprime=FEC0\0"						\ | 
 | 	"uboot=u-boot.bin\0"						\ | 
 | 	"kernel=uImage\0"						\ | 
 | 	"nfsroot=/opt/eldk/arm\0"					\ | 
 | 	"ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0"		\ | 
 | 	"ip_server=10.0.0.1\0"						\ | 
 | 	"nfs_path=/targetfs \0"						\ | 
 | 	"memory=mem=1024M\0"						\ | 
 | 	"bootdev=mmc dev 0; ext2load mmc 0:1\0"				\ | 
 | 	"root=root=/dev/mmcblk0p1\0"					\ | 
 | 	"option=rootwait rw fixrtc rootflags=barrier=1\0"		\ | 
 | 	"cpu_freq=arm_freq=996\0"					\ | 
 | 	"setbootargs=setenv bootargs console=ttymxc1,115200 ${root}"	\ | 
 | 		" ${option} ${memory} ${cpu_freq}\0"			\ | 
 | 	"setbootargs_nfs=setenv bootargs console=ttymxc1,115200"	\ | 
 | 		" root=/dev/nfs  nfsroot=${ip_server}:${nfs_path}"	\ | 
 | 		" nolock,wsize=4096,rsize=4096  ip=:::::eth0:dhcp"	\ | 
 | 		" ${memory} ${cpu_freq}\0"				\ | 
 | 	"setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0"	\ | 
 | 	"bootcmd=run setbootargs; run setbootdev; run boot_dev;"	\ | 
 | 		" bootm 0x10800000\0"					\ | 
 | 	"stdin=serial\0"						\ | 
 | 	"stdout=serial\0"						\ | 
 | 	"stderr=serial\0" | 
 |  | 
 |  | 
 | /* Print Buffer Size */ | 
 | #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE +		\ | 
 | 					 sizeof(CONFIG_SYS_PROMPT) + 16) | 
 |  | 
 | #define CONFIG_SYS_HZ			1000 | 
 |  | 
 | /* Physical Memory Map */ | 
 | #define CONFIG_NR_DRAM_BANKS		1 | 
 | #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR | 
 | #define PHYS_SDRAM_SIZE			(2u * 1024 * 1024 * 1024) | 
 |  | 
 | #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM | 
 | #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR | 
 | #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE | 
 |  | 
 | #define CONFIG_SYS_INIT_SP_OFFSET	\ | 
 | 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) | 
 | #define CONFIG_SYS_INIT_SP_ADDR		\ | 
 | 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) | 
 |  | 
 | /* Environment organization */ | 
 | #define CONFIG_ENV_SIZE			(8 * 1024) | 
 |  | 
 | #if defined(CONFIG_ENV_IS_IN_MMC) | 
 | 	#define CONFIG_ENV_OFFSET		(6 * 128 * 1024) | 
 | 	#define CONFIG_SYS_MMC_ENV_DEV		0 | 
 | 	#define CONFIG_DYNAMIC_MMC_DEVNO | 
 | #endif | 
 |  | 
 | #endif /* __CONFIG_H */ |