chromium/src/third_party/blink/web_tests/webaudio/AudioParam/audioparam-setValueCurveAtTime-interpolation.html - manifest_repos/chromium_src - Git at Google

 <!DOCTYPE html>
 <html>
   <head>
     <title>
       Test Interpolation for AudioParam.setValueCurveAtTime
     </title>
     <script src="../../resources/testharness.js"></script>
     <script src="../../resources/testharnessreport.js"></script>
     <script src="../resources/audit-util.js"></script>
     <script src="../resources/audit.js"></script>
     <title>
       Test Interpolation for AudioParam.setValueCurveAtTime
     </title>
   </head>
   <body>
     <script id="layout-test-code">
       // Play a constant signal through a gain node that is automated using
       // setValueCurveAtTime with a 2-element curve.  The output should be a
       // linear change.

       // Choose a sample rate that is a multiple of 128, the rendering quantum
       // size.  This makes the math work out to be nice numbers.
       let sampleRate = 25600;
       let testDurationSec = 1;
       let testDurationFrames = testDurationSec * sampleRate;

       // Where the curve starts and its duration.  This MUST be less than the
       // total rendering time.
       let curveStartTime = 256 / sampleRate;
       let curveDuration = 300 / sampleRate;
       ;
       let curveValue = 0.75;

       // At this time, the gain node goes to gain 1.  This is used to make sure
       // the value curve is propagated correctly until the next event.
       let fullGainTime = 0.75;

       // Thresholds use to determine if the test passes; these are
       // experimentally determined.  The SNR between the actual and expected
       // result should be at least |snrThreshold|.  The maximum difference
       // betwen them should not exceed |maxErrorThreshold|.
       let snrThreshold = 10000;
       let maxErrorThreshold = 0;

       let context;
       let actualResult;
       let expectedResult;

       let audit = Audit.createTaskRunner();

       // Array of test configs.  Each config must specify curveStartTime,
       // curveDuration, curveLength, fullGainTime, maxErrorThreshold, and
       // snrThreshold.
       let testConfigs = [
         {
           // The main test
           curveStartTime: 256 / sampleRate,
           curveDuration: 300 / sampleRate,
           curveLength: 2,
           fullGainTime: 0.75,
           maxErrorThreshold: 5.9605e-8,
           snrThreshold: 171.206
         },
         {
           // Increase the curve length
           curveStartTime: 256 / sampleRate,
           curveDuration: 300 / sampleRate,
           curveLength: 3,
           fullGainTime: 0.75,
           maxErrorThreshold: 5.9605e-8,
           snrThreshold: 171.206
         },
         {
           // Increase the curve length
           curveStartTime: 256 / sampleRate,
           curveDuration: 300 / sampleRate,
           curveLength: 16,
           fullGainTime: 0.75,
           maxErrorThreshold: 5.9605e-8,
           snrThreshold: 170.892
         },
         {
           // Increase the curve length
           curveStartTime: 256 / sampleRate,
           curveDuration: 300 / sampleRate,
           curveLength: 100,
           fullGainTime: 0.75,
           maxErrorThreshold: 1.1921e-7,
           snrThreshold: 168.712
         },
         {
           // Corner case with duration less than a frame!
           curveStartTime: 256 / sampleRate,
           curveDuration: 0.25 / sampleRate,
           curveLength: 2,
           fullGainTime: 0.75,
           maxErrorThreshold: 0,
           snrThreshold: 10000
         },
         {
           // Short duration test
           curveStartTime: 256 / sampleRate,
           curveDuration: 2 / sampleRate,
           curveLength: 2,
           fullGainTime: 0.75,
           maxErrorThreshold: 0,
           snrThreshold: 10000
         },
         {
           // Short duration test with many points.
           curveStartTime: 256 / sampleRate,
           curveDuration: 2 / sampleRate,
           curveLength: 8,
           fullGainTime: 0.75,
           maxErrorThreshold: 0,
           snrThreshold: 10000
         },
         {
           // Long duration, big curve
           curveStartTime: 256 / sampleRate,
           curveDuration: .5,
           curveLength: 1000,
           fullGainTime: 0.75,
           maxErrorThreshold: 5.9605e-8,
           snrThreshold: 152.784
         }
       ];

       // Creates a function based on the test config that is suitable for use by
       // defineTask().
       function createTaskFunction(config) {
         return function(task, should) {
           runTest(should, config).then(() => task.done());
         };
       }

       // Define a task for each config, in the order listed in testConfigs.
       for (let k = 0; k < testConfigs.length; ++k) {
         let config = testConfigs[k];
         let name = k + ':curve=' + config.curveLength +
             ',duration=' + (config.curveDuration * sampleRate);
         audit.define(name, createTaskFunction(config));
       }

       // Simple test from crbug.com/441471.  Makes sure the end points and the
       // middle point are interpolated correctly.
       audit.define('crbug-441471', (task, should) => {
         // Any sample rate should work; we pick something small such that the
         // time end points are on a sampling point.
         let context = new OfflineAudioContext(1, 5000, 5000)

             // A constant source
             let source = context.createBufferSource();
         source.buffer = createConstantBuffer(context, 1, 1);
         source.loop = true;

         let gain = context.createGain();

         let startTime = 0.7;
         let duration = 0.2;

         // Create the curve.  The interpolated result should be just a straight
         // line from -1 to 1 from time startTime to startTime + duration.

         let c = new Float32Array(3);
         c[0] = -1;
         c[1] = 0;
         c[2] = 1;
         gain.gain.setValueCurveAtTime(c, startTime, duration);
         source.connect(gain);
         gain.connect(context.destination);
         source.start();

         context.startRendering()
             .then(function(renderedBuffer) {
               let data = renderedBuffer.getChannelData(0);
               let endTime = startTime + duration;
               let midPoint = (startTime + endTime) / 2;

               should(
                   data[timeToSampleFrame(startTime, context.sampleRate)],
                   'Curve value at time ' + startTime)
                   .beEqualTo(c[0]);
               // Due to round-off, the value at the midpoint is not exactly zero
               // on arm64.  See crbug.com/558563.  The current value is
               // experimentally determined.
               should(
                   data[timeToSampleFrame(midPoint, context.sampleRate)],
                   'Curve value at time ' + midPoint)
                   .beCloseTo(0, {threshold: Math.pow(2, -51)});
               should(
                   data[timeToSampleFrame(endTime, context.sampleRate)],
                   'Curve value at time ' + endTime)
                   .beEqualTo(c[2]);
             })
             .then(() => task.done());
       });

       function runTest(should, config) {
         context = new OfflineAudioContext(1, testDurationFrames, sampleRate);

         // A constant audio source of value 1.
         let source = context.createBufferSource();
         source.buffer = createConstantBuffer(context, 1, 1);
         source.loop = true;

         // The value curve for testing.  Just to make things easy for testing,
         // make the curve a simple ramp up to curveValue.
         // TODO(rtoy): Maybe allow more complicated curves?
         let curve = new Float32Array(config.curveLength);
         for (let k = 0; k < config.curveLength; ++k) {
           curve[k] = curveValue / (config.curveLength - 1) * k;
         }

         // A gain node that is to be automated using setValueCurveAtTime.
         let gain = context.createGain();
         gain.gain.value = 0;
         gain.gain.setValueCurveAtTime(
             curve, config.curveStartTime, config.curveDuration);
         // This is to verify that setValueCurveAtTime ends appropriately.
         gain.gain.setValueAtTime(1, config.fullGainTime);

         source.connect(gain);
         gain.connect(context.destination);
         source.start();

         // Some consistency checks on the test parameters
         let prefix = 'Length ' + config.curveLength + ', duration ' +
             config.curveDuration;
         should(
             config.curveStartTime + config.curveDuration,
             prefix + ': Check: Curve end time')
             .beLessThanOrEqualTo(testDurationSec);
         should(config.fullGainTime, prefix + ': Check: Full gain start time')
             .beLessThanOrEqualTo(testDurationSec);
         should(config.fullGainTime, prefix + ': Check: Full gain start time')
             .beGreaterThanOrEqualTo(
                 config.curveStartTime + config.curveDuration);

         // Rock and roll!
         return context.startRendering().then(checkResult(should, config));
       }

       // Return a function to check that the rendered result matches the
       // expected result.
       function checkResult(should, config) {
         return function(renderedBuffer) {
           let success = true;

           actualResult = renderedBuffer.getChannelData(0);
           expectedResult = computeExpectedResult(config);

           // Compute the SNR and max absolute difference between the actual and
           // expected result.
           let SNR = 10 * Math.log10(computeSNR(actualResult, expectedResult));
           let maxDiff = -1;
           let posn = -1;

           for (let k = 0; k < actualResult.length; ++k) {
             let diff = Math.abs(actualResult[k] - expectedResult[k]);
             if (maxDiff < diff) {
               maxDiff = diff;
               posn = k;
             }
           }

           let prefix = 'Curve length ' + config.curveLength + ', duration ' +
               config.curveDuration;
           should(SNR, prefix + ': SNR')
               .beGreaterThanOrEqualTo(config.snrThreshold);

           should(maxDiff, prefix + ': Max difference')
               .beLessThanOrEqualTo(config.maxErrorThreshold);
         }
       }

       // Compute the expected result based on the config settings.
       function computeExpectedResult(config) {
         // The automation curve starts at |curveStartTime| and has duration
         // |curveDuration|.  So, the output should be zero until curveStartTime,
         // linearly ramp up from there to |curveValue|, and then be constant 1
         // from then to the end of the buffer.

         let expected = new Float32Array(testDurationFrames);

         let curveStartFrame = config.curveStartTime * sampleRate;
         let curveEndFrame =
             (config.curveStartTime + config.curveDuration) * sampleRate;
         let fullGainFrame = config.fullGainTime * sampleRate;

         let k;

         // Zero out the start.
         for (k = 0; k < curveStartFrame; ++k)
           expected[k] = 0;

         // Linearly ramp now.  This assumes that the actual curve used is a
         // linear ramp, even if there are many curve points.
         let stepSize = curveValue / (config.curveDuration * sampleRate);
         for (; k < curveEndFrame; ++k)
           expected[k] = stepSize * (k - curveStartFrame);

         // Hold it constant until the next event
         for (; k < fullGainFrame; ++k)
           expected[k] = curveValue;

         // Amplitude is one for the rest of the test.
         for (; k < testDurationFrames; ++k)
           expected[k] = 1;

         return expected;
       }

       audit.run();
     </script>
   </body>
 </html>
	<!DOCTYPE html>
	<html>
	<head>
	<title>
	Test Interpolation for AudioParam.setValueCurveAtTime
	</title>
	<script src="../../resources/testharness.js"></script>
	<script src="../../resources/testharnessreport.js"></script>
	<script src="../resources/audit-util.js"></script>
	<script src="../resources/audit.js"></script>
	<title>
	Test Interpolation for AudioParam.setValueCurveAtTime
	</title>
	</head>
	<body>
	<script id="layout-test-code">
	// Play a constant signal through a gain node that is automated using
	// setValueCurveAtTime with a 2-element curve. The output should be a
	// linear change.

	// Choose a sample rate that is a multiple of 128, the rendering quantum
	// size. This makes the math work out to be nice numbers.
	let sampleRate = 25600;
	let testDurationSec = 1;
	let testDurationFrames = testDurationSec * sampleRate;

	// Where the curve starts and its duration. This MUST be less than the
	// total rendering time.
	let curveStartTime = 256 / sampleRate;
	let curveDuration = 300 / sampleRate;
	;
	let curveValue = 0.75;

	// At this time, the gain node goes to gain 1. This is used to make sure
	// the value curve is propagated correctly until the next event.
	let fullGainTime = 0.75;

	// Thresholds use to determine if the test passes; these are
	// experimentally determined. The SNR between the actual and expected
	// result should be at least \|snrThreshold\|. The maximum difference
	// betwen them should not exceed \|maxErrorThreshold\|.
	let snrThreshold = 10000;
	let maxErrorThreshold = 0;

	let context;
	let actualResult;
	let expectedResult;

	let audit = Audit.createTaskRunner();

	// Array of test configs. Each config must specify curveStartTime,
	// curveDuration, curveLength, fullGainTime, maxErrorThreshold, and
	// snrThreshold.
	let testConfigs = [
	{
	// The main test
	curveStartTime: 256 / sampleRate,
	curveDuration: 300 / sampleRate,
	curveLength: 2,
	fullGainTime: 0.75,
	maxErrorThreshold: 5.9605e-8,
	snrThreshold: 171.206
	},
	{
	// Increase the curve length
	curveStartTime: 256 / sampleRate,
	curveDuration: 300 / sampleRate,
	curveLength: 3,
	fullGainTime: 0.75,
	maxErrorThreshold: 5.9605e-8,
	snrThreshold: 171.206
	},
	{
	// Increase the curve length
	curveStartTime: 256 / sampleRate,
	curveDuration: 300 / sampleRate,
	curveLength: 16,
	fullGainTime: 0.75,
	maxErrorThreshold: 5.9605e-8,
	snrThreshold: 170.892
	},
	{
	// Increase the curve length
	curveStartTime: 256 / sampleRate,
	curveDuration: 300 / sampleRate,
	curveLength: 100,
	fullGainTime: 0.75,
	maxErrorThreshold: 1.1921e-7,
	snrThreshold: 168.712
	},
	{
	// Corner case with duration less than a frame!
	curveStartTime: 256 / sampleRate,
	curveDuration: 0.25 / sampleRate,
	curveLength: 2,
	fullGainTime: 0.75,
	maxErrorThreshold: 0,
	snrThreshold: 10000
	},
	{
	// Short duration test
	curveStartTime: 256 / sampleRate,
	curveDuration: 2 / sampleRate,
	curveLength: 2,
	fullGainTime: 0.75,
	maxErrorThreshold: 0,
	snrThreshold: 10000
	},
	{
	// Short duration test with many points.
	curveStartTime: 256 / sampleRate,
	curveDuration: 2 / sampleRate,
	curveLength: 8,
	fullGainTime: 0.75,
	maxErrorThreshold: 0,
	snrThreshold: 10000
	},
	{
	// Long duration, big curve
	curveStartTime: 256 / sampleRate,
	curveDuration: .5,
	curveLength: 1000,
	fullGainTime: 0.75,
	maxErrorThreshold: 5.9605e-8,
	snrThreshold: 152.784
	}
	];

	// Creates a function based on the test config that is suitable for use by
	// defineTask().
	function createTaskFunction(config) {
	return function(task, should) {
	runTest(should, config).then(() => task.done());
	};
	}

	// Define a task for each config, in the order listed in testConfigs.
	for (let k = 0; k < testConfigs.length; ++k) {
	let config = testConfigs[k];
	let name = k + ':curve=' + config.curveLength +
	',duration=' + (config.curveDuration * sampleRate);
	audit.define(name, createTaskFunction(config));
	}

	// Simple test from crbug.com/441471. Makes sure the end points and the
	// middle point are interpolated correctly.
	audit.define('crbug-441471', (task, should) => {
	// Any sample rate should work; we pick something small such that the
	// time end points are on a sampling point.
	let context = new OfflineAudioContext(1, 5000, 5000)

	// A constant source
	let source = context.createBufferSource();
	source.buffer = createConstantBuffer(context, 1, 1);
	source.loop = true;

	let gain = context.createGain();

	let startTime = 0.7;
	let duration = 0.2;

	// Create the curve. The interpolated result should be just a straight
	// line from -1 to 1 from time startTime to startTime + duration.

	let c = new Float32Array(3);
	c[0] = -1;
	c[1] = 0;
	c[2] = 1;
	gain.gain.setValueCurveAtTime(c, startTime, duration);
	source.connect(gain);
	gain.connect(context.destination);
	source.start();

	context.startRendering()
	.then(function(renderedBuffer) {
	let data = renderedBuffer.getChannelData(0);
	let endTime = startTime + duration;
	let midPoint = (startTime + endTime) / 2;

	should(
	data[timeToSampleFrame(startTime, context.sampleRate)],
	'Curve value at time ' + startTime)
	.beEqualTo(c[0]);
	// Due to round-off, the value at the midpoint is not exactly zero
	// on arm64. See crbug.com/558563. The current value is
	// experimentally determined.
	should(
	data[timeToSampleFrame(midPoint, context.sampleRate)],
	'Curve value at time ' + midPoint)
	.beCloseTo(0, {threshold: Math.pow(2, -51)});
	should(
	data[timeToSampleFrame(endTime, context.sampleRate)],
	'Curve value at time ' + endTime)
	.beEqualTo(c[2]);
	})
	.then(() => task.done());
	});

	function runTest(should, config) {
	context = new OfflineAudioContext(1, testDurationFrames, sampleRate);

	// A constant audio source of value 1.
	let source = context.createBufferSource();
	source.buffer = createConstantBuffer(context, 1, 1);
	source.loop = true;

	// The value curve for testing. Just to make things easy for testing,
	// make the curve a simple ramp up to curveValue.
	// TODO(rtoy): Maybe allow more complicated curves?
	let curve = new Float32Array(config.curveLength);
	for (let k = 0; k < config.curveLength; ++k) {
	curve[k] = curveValue / (config.curveLength - 1) * k;
	}

	// A gain node that is to be automated using setValueCurveAtTime.
	let gain = context.createGain();
	gain.gain.value = 0;
	gain.gain.setValueCurveAtTime(
	curve, config.curveStartTime, config.curveDuration);
	// This is to verify that setValueCurveAtTime ends appropriately.
	gain.gain.setValueAtTime(1, config.fullGainTime);

	source.connect(gain);
	gain.connect(context.destination);
	source.start();

	// Some consistency checks on the test parameters
	let prefix = 'Length ' + config.curveLength + ', duration ' +
	config.curveDuration;
	should(
	config.curveStartTime + config.curveDuration,
	prefix + ': Check: Curve end time')
	.beLessThanOrEqualTo(testDurationSec);
	should(config.fullGainTime, prefix + ': Check: Full gain start time')
	.beLessThanOrEqualTo(testDurationSec);
	should(config.fullGainTime, prefix + ': Check: Full gain start time')
	.beGreaterThanOrEqualTo(
	config.curveStartTime + config.curveDuration);

	// Rock and roll!
	return context.startRendering().then(checkResult(should, config));
	}

	// Return a function to check that the rendered result matches the
	// expected result.
	function checkResult(should, config) {
	return function(renderedBuffer) {
	let success = true;

	actualResult = renderedBuffer.getChannelData(0);
	expectedResult = computeExpectedResult(config);

	// Compute the SNR and max absolute difference between the actual and
	// expected result.
	let SNR = 10 * Math.log10(computeSNR(actualResult, expectedResult));
	let maxDiff = -1;
	let posn = -1;

	for (let k = 0; k < actualResult.length; ++k) {
	let diff = Math.abs(actualResult[k] - expectedResult[k]);
	if (maxDiff < diff) {
	maxDiff = diff;
	posn = k;
	}
	}

	let prefix = 'Curve length ' + config.curveLength + ', duration ' +
	config.curveDuration;
	should(SNR, prefix + ': SNR')
	.beGreaterThanOrEqualTo(config.snrThreshold);

	should(maxDiff, prefix + ': Max difference')
	.beLessThanOrEqualTo(config.maxErrorThreshold);
	}
	}

	// Compute the expected result based on the config settings.
	function computeExpectedResult(config) {
	// The automation curve starts at \|curveStartTime\| and has duration
	// \|curveDuration\|. So, the output should be zero until curveStartTime,
	// linearly ramp up from there to \|curveValue\|, and then be constant 1
	// from then to the end of the buffer.

	let expected = new Float32Array(testDurationFrames);

	let curveStartFrame = config.curveStartTime * sampleRate;
	let curveEndFrame =
	(config.curveStartTime + config.curveDuration) * sampleRate;
	let fullGainFrame = config.fullGainTime * sampleRate;

	let k;

	// Zero out the start.
	for (k = 0; k < curveStartFrame; ++k)
	expected[k] = 0;

	// Linearly ramp now. This assumes that the actual curve used is a
	// linear ramp, even if there are many curve points.
	let stepSize = curveValue / (config.curveDuration * sampleRate);
	for (; k < curveEndFrame; ++k)
	expected[k] = stepSize * (k - curveStartFrame);

	// Hold it constant until the next event
	for (; k < fullGainFrame; ++k)
	expected[k] = curveValue;

	// Amplitude is one for the rest of the test.
	for (; k < testDurationFrames; ++k)
	expected[k] = 1;

	return expected;
	}

	audit.run();
	</script>
	</body>
	</html>