blob: 3d36924b15e86e3775aa1c6a1dfc0378cedd1ab2 [file] [log] [blame]
# ===========================================================================
# https://www.gnu.org/software/autoconf-archive/ax_code_coverage.html
# ===========================================================================
#
# SYNOPSIS
#
# AX_CODE_COVERAGE()
#
# DESCRIPTION
#
# Defines CODE_COVERAGE_CPPFLAGS, CODE_COVERAGE_CFLAGS,
# CODE_COVERAGE_CXXFLAGS and CODE_COVERAGE_LIBS which should be included
# in the CPPFLAGS, CFLAGS CXXFLAGS and LIBS/LIBADD variables of every
# build target (program or library) which should be built with code
# coverage support. Also add rules using AX_ADD_AM_MACRO_STATIC; and
# $enable_code_coverage which can be used in subsequent configure output.
# CODE_COVERAGE_ENABLED is defined and substituted, and corresponds to the
# value of the --enable-code-coverage option, which defaults to being
# disabled.
#
# Test also for gcov program and create GCOV variable that could be
# substituted.
#
# Note that all optimization flags in CFLAGS must be disabled when code
# coverage is enabled.
#
# Usage example:
#
# configure.ac:
#
# AX_CODE_COVERAGE
#
# Makefile.am:
#
# include $(top_srcdir)/aminclude_static.am
#
# my_program_LIBS = ... $(CODE_COVERAGE_LIBS) ...
# my_program_CPPFLAGS = ... $(CODE_COVERAGE_CPPFLAGS) ...
# my_program_CFLAGS = ... $(CODE_COVERAGE_CFLAGS) ...
# my_program_CXXFLAGS = ... $(CODE_COVERAGE_CXXFLAGS) ...
#
# clean-local: code-coverage-clean
# distclean-local: code-coverage-dist-clean
#
# This results in a "check-code-coverage" rule being added to any
# Makefile.am which do "include $(top_srcdir)/aminclude_static.am"
# (assuming the module has been configured with --enable-code-coverage).
# Running `make check-code-coverage` in that directory will run the
# module's test suite (`make check`) and build a code coverage report
# detailing the code which was touched, then print the URI for the report.
#
# This code was derived from Makefile.decl in GLib, originally licensed
# under LGPLv2.1+.
#
# LICENSE
#
# Copyright (c) 2012, 2016 Philip Withnall
# Copyright (c) 2012 Xan Lopez
# Copyright (c) 2012 Christian Persch
# Copyright (c) 2012 Paolo Borelli
# Copyright (c) 2012 Dan Winship
# Copyright (c) 2015,2018 Bastien ROUCARIES
#
# This library is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or (at
# your option) any later version.
#
# This library is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with this program. If not, see <https://www.gnu.org/licenses/>.
#serial 32
m4_define(_AX_CODE_COVERAGE_RULES,[
AX_ADD_AM_MACRO_STATIC([
# Code coverage
#
# Optional:
# - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting.
# Multiple directories may be specified, separated by whitespace.
# (Default: \$(top_builddir))
# - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated
# by lcov for code coverage. (Default:
# \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage.info)
# - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage
# reports to be created. (Default:
# \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage)
# - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage,
# set to 0 to disable it and leave empty to stay with the default.
# (Default: empty)
# - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov
# instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE)
# - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov
# instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)
# - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov
# - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the
# collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
# - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov
# instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
# - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering
# lcov instance. (Default: empty)
# - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov
# instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)
# - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the
# genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE)
# - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml
# instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT)
# - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore
#
# The generated report will be titled using the \$(PACKAGE_NAME) and
# \$(PACKAGE_VERSION). In order to add the current git hash to the title,
# use the git-version-gen script, available online.
# Optional variables
# run only on top dir
if CODE_COVERAGE_ENABLED
ifeq (\$(abs_builddir), \$(abs_top_builddir))
CODE_COVERAGE_DIRECTORY ?= \$(top_builddir)
CODE_COVERAGE_OUTPUT_FILE ?= \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage.info
CODE_COVERAGE_OUTPUT_DIRECTORY ?= \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage
CODE_COVERAGE_BRANCH_COVERAGE ?=
CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= \$(if \$(CODE_COVERAGE_BRANCH_COVERAGE),\
--rc lcov_branch_coverage=\$(CODE_COVERAGE_BRANCH_COVERAGE))
CODE_COVERAGE_LCOV_SHOPTS ?= \$(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)
CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool \"\$(GCOV)\"
CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= \$(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
CODE_COVERAGE_LCOV_OPTIONS ?= \$(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?=
CODE_COVERAGE_LCOV_RMOPTS ?= \$(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)
CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\
\$(if \$(CODE_COVERAGE_BRANCH_COVERAGE),\
--rc genhtml_branch_coverage=\$(CODE_COVERAGE_BRANCH_COVERAGE))
CODE_COVERAGE_GENHTML_OPTIONS ?= \$(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT)
CODE_COVERAGE_IGNORE_PATTERN ?=
GITIGNOREFILES = \$(GITIGNOREFILES) \$(CODE_COVERAGE_OUTPUT_FILE) \$(CODE_COVERAGE_OUTPUT_DIRECTORY)
code_coverage_v_lcov_cap = \$(code_coverage_v_lcov_cap_\$(V))
code_coverage_v_lcov_cap_ = \$(code_coverage_v_lcov_cap_\$(AM_DEFAULT_VERBOSITY))
code_coverage_v_lcov_cap_0 = @echo \" LCOV --capture\" \$(CODE_COVERAGE_OUTPUT_FILE);
code_coverage_v_lcov_ign = \$(code_coverage_v_lcov_ign_\$(V))
code_coverage_v_lcov_ign_ = \$(code_coverage_v_lcov_ign_\$(AM_DEFAULT_VERBOSITY))
code_coverage_v_lcov_ign_0 = @echo \" LCOV --remove /tmp/*\" \$(CODE_COVERAGE_IGNORE_PATTERN);
code_coverage_v_genhtml = \$(code_coverage_v_genhtml_\$(V))
code_coverage_v_genhtml_ = \$(code_coverage_v_genhtml_\$(AM_DEFAULT_VERBOSITY))
code_coverage_v_genhtml_0 = @echo \" GEN \" \"\$(CODE_COVERAGE_OUTPUT_DIRECTORY)\";
code_coverage_quiet = \$(code_coverage_quiet_\$(V))
code_coverage_quiet_ = \$(code_coverage_quiet_\$(AM_DEFAULT_VERBOSITY))
code_coverage_quiet_0 = --quiet
# sanitizes the test-name: replaces with underscores: dashes and dots
code_coverage_sanitize = \$(subst -,_,\$(subst .,_,\$(1)))
# Use recursive makes in order to ignore errors during check
check-code-coverage:
-\$(AM_V_at)\$(MAKE) \$(AM_MAKEFLAGS) -k check
\$(AM_V_at)\$(MAKE) \$(AM_MAKEFLAGS) code-coverage-capture
# Capture code coverage data
code-coverage-capture: code-coverage-capture-hook
\$(code_coverage_v_lcov_cap)\$(LCOV) \$(code_coverage_quiet) \$(addprefix --directory ,\$(CODE_COVERAGE_DIRECTORY)) --capture --output-file \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" --test-name \"\$(call code_coverage_sanitize,\$(PACKAGE_NAME)-\$(PACKAGE_VERSION))\" --no-checksum --compat-libtool \$(CODE_COVERAGE_LCOV_SHOPTS) \$(CODE_COVERAGE_LCOV_OPTIONS)
\$(code_coverage_v_lcov_ign)\$(LCOV) \$(code_coverage_quiet) \$(addprefix --directory ,\$(CODE_COVERAGE_DIRECTORY)) --remove \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" \"/tmp/*\" \$(CODE_COVERAGE_IGNORE_PATTERN) --output-file \"\$(CODE_COVERAGE_OUTPUT_FILE)\" \$(CODE_COVERAGE_LCOV_SHOPTS) \$(CODE_COVERAGE_LCOV_RMOPTS)
-@rm -f \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\"
\$(code_coverage_v_genhtml)LANG=C \$(GENHTML) \$(code_coverage_quiet) \$(addprefix --prefix ,\$(CODE_COVERAGE_DIRECTORY)) --output-directory \"\$(CODE_COVERAGE_OUTPUT_DIRECTORY)\" --title \"\$(PACKAGE_NAME)-\$(PACKAGE_VERSION) Code Coverage\" --legend --show-details \"\$(CODE_COVERAGE_OUTPUT_FILE)\" \$(CODE_COVERAGE_GENHTML_OPTIONS)
@echo \"file://\$(abs_builddir)/\$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html\"
code-coverage-clean:
-\$(LCOV) --directory \$(top_builddir) -z
-rm -rf \"\$(CODE_COVERAGE_OUTPUT_FILE)\" \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" \"\$(CODE_COVERAGE_OUTPUT_DIRECTORY)\"
-find . \\( -name \"*.gcda\" -o -name \"*.gcno\" -o -name \"*.gcov\" \\) -delete
code-coverage-dist-clean:
A][M_DISTCHECK_CONFIGURE_FLAGS = \$(A][M_DISTCHECK_CONFIGURE_FLAGS) --disable-code-coverage
else # ifneq (\$(abs_builddir), \$(abs_top_builddir))
check-code-coverage:
code-coverage-capture: code-coverage-capture-hook
code-coverage-clean:
code-coverage-dist-clean:
endif # ifeq (\$(abs_builddir), \$(abs_top_builddir))
else #! CODE_COVERAGE_ENABLED
# Use recursive makes in order to ignore errors during check
check-code-coverage:
@echo \"Need to reconfigure with --enable-code-coverage\"
# Capture code coverage data
code-coverage-capture: code-coverage-capture-hook
@echo \"Need to reconfigure with --enable-code-coverage\"
code-coverage-clean:
code-coverage-dist-clean:
endif #CODE_COVERAGE_ENABLED
# Hook rule executed before code-coverage-capture, overridable by the user
code-coverage-capture-hook:
.PHONY: check-code-coverage code-coverage-capture code-coverage-dist-clean code-coverage-clean code-coverage-capture-hook
])
])
AC_DEFUN([_AX_CODE_COVERAGE_ENABLED],[
AX_CHECK_GNU_MAKE([],[AC_MSG_ERROR([not using GNU make that is needed for coverage])])
AC_REQUIRE([AX_ADD_AM_MACRO_STATIC])
# check for gcov
AC_CHECK_TOOL([GCOV],
[$_AX_CODE_COVERAGE_GCOV_PROG_WITH],
[:])
AS_IF([test "X$GCOV" = "X:"],
[AC_MSG_ERROR([gcov is needed to do coverage])])
AC_SUBST([GCOV])
dnl Check if gcc is being used
AS_IF([ test "$GCC" = "no" ], [
AC_MSG_ERROR([not compiling with gcc, which is required for gcov code coverage])
])
AC_CHECK_PROG([LCOV], [lcov], [lcov])
AC_CHECK_PROG([GENHTML], [genhtml], [genhtml])
AS_IF([ test x"$LCOV" = x ], [
AC_MSG_ERROR([To enable code coverage reporting you must have lcov installed])
])
AS_IF([ test x"$GENHTML" = x ], [
AC_MSG_ERROR([Could not find genhtml from the lcov package])
])
dnl Build the code coverage flags
dnl Define CODE_COVERAGE_LDFLAGS for backwards compatibility
CODE_COVERAGE_CPPFLAGS="-DNDEBUG"
CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage"
CODE_COVERAGE_CXXFLAGS="-O0 -g -fprofile-arcs -ftest-coverage"
CODE_COVERAGE_LIBS="-lgcov"
AC_SUBST([CODE_COVERAGE_CPPFLAGS])
AC_SUBST([CODE_COVERAGE_CFLAGS])
AC_SUBST([CODE_COVERAGE_CXXFLAGS])
AC_SUBST([CODE_COVERAGE_LIBS])
])
AC_DEFUN([AX_CODE_COVERAGE],[
dnl Check for --enable-code-coverage
# allow to override gcov location
AC_ARG_WITH([gcov],
[AS_HELP_STRING([--with-gcov[=GCOV]], [use given GCOV for coverage (GCOV=gcov).])],
[_AX_CODE_COVERAGE_GCOV_PROG_WITH=$with_gcov],
[_AX_CODE_COVERAGE_GCOV_PROG_WITH=gcov])
AC_MSG_CHECKING([whether to build with code coverage support])
AC_ARG_ENABLE([code-coverage],
AS_HELP_STRING([--enable-code-coverage],
[Whether to enable code coverage support]),,
enable_code_coverage=no)
AM_CONDITIONAL([CODE_COVERAGE_ENABLED], [test "x$enable_code_coverage" = xyes])
AC_SUBST([CODE_COVERAGE_ENABLED], [$enable_code_coverage])
AC_MSG_RESULT($enable_code_coverage)
AS_IF([ test "x$enable_code_coverage" = xyes ], [
_AX_CODE_COVERAGE_ENABLED
])
_AX_CODE_COVERAGE_RULES
])