| /* |
| * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions. |
| * |
| * Copyright (C) 1999-2016, Broadcom Corporation |
| * |
| * Unless you and Broadcom execute a separate written software license |
| * agreement governing use of this software, this software is licensed to you |
| * under the terms of the GNU General Public License version 2 (the "GPL"), |
| * available at http://www.broadcom.com/licenses/GPLv2.php, with the |
| * following added to such license: |
| * |
| * As a special exception, the copyright holders of this software give you |
| * permission to link this software with independent modules, and to copy and |
| * distribute the resulting executable under terms of your choice, provided that |
| * you also meet, for each linked independent module, the terms and conditions of |
| * the license of that module. An independent module is a module which is not |
| * derived from this software. The special exception does not apply to any |
| * modifications of the software. |
| * |
| * Notwithstanding the above, under no circumstances may you combine this |
| * software in any way with any other Broadcom software provided under a license |
| * other than the GPL, without Broadcom's express prior written consent. |
| * |
| * |
| * <<Broadcom-WL-IPTag/Open:>> |
| * |
| * $Id: sbpcmcia.h 521344 2014-12-17 10:03:55Z $ |
| */ |
| |
| #ifndef _SBPCMCIA_H |
| #define _SBPCMCIA_H |
| |
| /* All the addresses that are offsets in attribute space are divided |
| * by two to account for the fact that odd bytes are invalid in |
| * attribute space and our read/write routines make the space appear |
| * as if they didn't exist. Still we want to show the original numbers |
| * as documented in the hnd_pcmcia core manual. |
| */ |
| |
| /* PCMCIA Function Configuration Registers */ |
| #define PCMCIA_FCR (0x700 / 2) |
| |
| #define FCR0_OFF 0 |
| #define FCR1_OFF (0x40 / 2) |
| #define FCR2_OFF (0x80 / 2) |
| #define FCR3_OFF (0xc0 / 2) |
| |
| #define PCMCIA_FCR0 (0x700 / 2) |
| #define PCMCIA_FCR1 (0x740 / 2) |
| #define PCMCIA_FCR2 (0x780 / 2) |
| #define PCMCIA_FCR3 (0x7c0 / 2) |
| |
| /* Standard PCMCIA FCR registers */ |
| |
| #define PCMCIA_COR 0 |
| |
| #define COR_RST 0x80 |
| #define COR_LEV 0x40 |
| #define COR_IRQEN 0x04 |
| #define COR_BLREN 0x01 |
| #define COR_FUNEN 0x01 |
| |
| |
| #define PCICIA_FCSR (2 / 2) |
| #define PCICIA_PRR (4 / 2) |
| #define PCICIA_SCR (6 / 2) |
| #define PCICIA_ESR (8 / 2) |
| |
| |
| #define PCM_MEMOFF 0x0000 |
| #define F0_MEMOFF 0x1000 |
| #define F1_MEMOFF 0x2000 |
| #define F2_MEMOFF 0x3000 |
| #define F3_MEMOFF 0x4000 |
| |
| /* Memory base in the function fcr's */ |
| #define MEM_ADDR0 (0x728 / 2) |
| #define MEM_ADDR1 (0x72a / 2) |
| #define MEM_ADDR2 (0x72c / 2) |
| |
| /* PCMCIA base plus Srom access in fcr0: */ |
| #define PCMCIA_ADDR0 (0x072e / 2) |
| #define PCMCIA_ADDR1 (0x0730 / 2) |
| #define PCMCIA_ADDR2 (0x0732 / 2) |
| |
| #define MEM_SEG (0x0734 / 2) |
| #define SROM_CS (0x0736 / 2) |
| #define SROM_DATAL (0x0738 / 2) |
| #define SROM_DATAH (0x073a / 2) |
| #define SROM_ADDRL (0x073c / 2) |
| #define SROM_ADDRH (0x073e / 2) |
| #define SROM_INFO2 (0x0772 / 2) /* Corerev >= 2 && <= 5 */ |
| #define SROM_INFO (0x07be / 2) /* Corerev >= 6 */ |
| |
| /* Values for srom_cs: */ |
| #define SROM_IDLE 0 |
| #define SROM_WRITE 1 |
| #define SROM_READ 2 |
| #define SROM_WEN 4 |
| #define SROM_WDS 7 |
| #define SROM_DONE 8 |
| |
| /* Fields in srom_info: */ |
| #define SRI_SZ_MASK 0x03 |
| #define SRI_BLANK 0x04 |
| #define SRI_OTP 0x80 |
| |
| |
| /* sbtmstatelow */ |
| #define SBTML_INT_ACK 0x40000 /* ack the sb interrupt */ |
| #define SBTML_INT_EN 0x20000 /* enable sb interrupt */ |
| |
| /* sbtmstatehigh */ |
| #define SBTMH_INT_STATUS 0x40000 /* sb interrupt status */ |
| |
| #endif /* _SBPCMCIA_H */ |
