| /* |
| * Misc utility routines for WL and Apps |
| * This header file housing the define and function prototype use by |
| * both the wl driver, tools & Apps. |
| * |
| * Copyright (C) 2020, Broadcom. |
| * |
| * Unless you and Broadcom execute a separate written software license |
| * agreement governing use of this software, this software is licensed to you |
| * under the terms of the GNU General Public License version 2 (the "GPL"), |
| * available at http://www.broadcom.com/licenses/GPLv2.php, with the |
| * following added to such license: |
| * |
| * As a special exception, the copyright holders of this software give you |
| * permission to link this software with independent modules, and to copy and |
| * distribute the resulting executable under terms of your choice, provided that |
| * you also meet, for each linked independent module, the terms and conditions of |
| * the license of that module. An independent module is a module which is not |
| * derived from this software. The special exception does not apply to any |
| * modifications of the software. |
| * |
| * |
| * <<Broadcom-WL-IPTag/Dual:>> |
| */ |
| |
| #ifndef _bcmwifi_channels_h_ |
| #define _bcmwifi_channels_h_ |
| |
| /* A chanspec holds the channel number, band, bandwidth and primary 20MHz sub-band */ |
| typedef uint16 chanspec_t; |
| typedef uint16 chanspec_band_t; |
| typedef uint16 chanspec_bw_t; |
| typedef uint16 chanspec_subband_t; |
| |
| /* channel defines */ |
| #define CH_80MHZ_APART 16u |
| #define CH_40MHZ_APART 8u |
| #define CH_20MHZ_APART 4u |
| #define CH_10MHZ_APART 2u |
| #define CH_5MHZ_APART 1u /* 2G band channels are 5 Mhz apart */ |
| #define CH_160MHZ_APART (32u * CH_5MHZ_APART) /* 32 5Mhz-spaces */ |
| |
| #define CH_MIN_2G_CHANNEL 1u /* Min channel in 2G band */ |
| #define CH_MAX_2G_CHANNEL 14u /* Max channel in 2G band */ |
| #define CH_MIN_2G_40M_CHANNEL 3u /* Min 40MHz center channel in 2G band */ |
| #define CH_MAX_2G_40M_CHANNEL 11u /* Max 40MHz center channel in 2G band */ |
| |
| #define CH_MIN_6G_CHANNEL 1u /* Min 20MHz channel in 6G band */ |
| #define CH_MAX_6G_CHANNEL 253u /* Max 20MHz channel in 6G band */ |
| #define CH_MIN_6G_40M_CHANNEL 3u /* Min 40MHz center channel in 6G band */ |
| #define CH_MAX_6G_40M_CHANNEL 227u /* Max 40MHz center channel in 6G band */ |
| #define CH_MIN_6G_80M_CHANNEL 7u /* Min 80MHz center channel in 6G band */ |
| #define CH_MAX_6G_80M_CHANNEL 215u /* Max 80MHz center channel in 6G band */ |
| #define CH_MIN_6G_160M_CHANNEL 15u /* Min 160MHz center channel in 6G band */ |
| #define CH_MAX_6G_160M_CHANNEL 207u /* Max 160MHz center channel in 6G band */ |
| #define CH_MIN_6G_240M_CHANNEL 23u /* Min 240MHz center channel in 6G band */ |
| #define CH_MAX_6G_240M_CHANNEL 167u /* Max 240MHz center channel in 6G band */ |
| #define CH_MIN_6G_320M_CHANNEL 31u /* Min 320MHz center channel in 6G band */ |
| #define CH_MAX_6G_320M_CHANNEL 199u /* Max 320MHz center channel in 6G band */ |
| |
| /* maximum # channels the s/w supports */ |
| #define MAXCHANNEL 254u /* max # supported channels. |
| * DO NOT MAKE > 255: channels are uint8's all over |
| */ |
| #define MAXCHANNEL_NUM (MAXCHANNEL - 1) /* max channel number */ |
| |
| #define INVCHANNEL 255u /* error value for a bad channel */ |
| |
| /* length of channel vector bitmap is the MAXCHANNEL we want to handle rounded up to a byte */ |
| /* The actual CHANVEC_LEN fix is leading to high static memory impact |
| * in all projects wherein the previous CHANVEC_LEN definition is used. |
| * |
| * Retaining the previous definition under MAXCHNL_ROM_COMPAT flag. |
| * All those chip porgrams where memory impact is observed need to define the same. |
| */ |
| #ifdef MAXCHNL_ROM_COMPAT |
| #define CHANVEC_LEN (MAXCHANNEL + (8 - 1) / 8) |
| #else |
| #define CHANVEC_LEN ((MAXCHANNEL + (8 - 1)) / 8) |
| #endif |
| |
| /* channel bitvec */ |
| typedef struct { |
| uint8 vec[CHANVEC_LEN]; /* bitvec of channels */ |
| } chanvec_t; |
| |
| /* make sure channel num is within valid range */ |
| #define CH_NUM_VALID_RANGE(ch_num) ((ch_num) > 0 && (ch_num) <= MAXCHANNEL_NUM) |
| |
| #define CHSPEC_CTLOVLP(sp1, sp2, sep) \ |
| ((uint)ABS(wf_chspec_ctlchan(sp1) - wf_chspec_ctlchan(sp2)) < (uint)(sep)) |
| |
| /* All builds use the new 11ac ratespec/chanspec */ |
| #undef D11AC_IOTYPES |
| #define D11AC_IOTYPES |
| |
| /* For contiguous channel bandwidth other than 240MHz/320Mhz */ |
| #define WL_CHANSPEC_CHAN_MASK 0x00ffu |
| #define WL_CHANSPEC_CHAN_SHIFT 0u |
| |
| /* For contiguous channel bandwidth >= 240MHz */ |
| #define WL_CHANSPEC_GE240_CHAN_MASK 0x0003u |
| #define WL_CHANSPEC_GE240_CHAN_SHIFT 0u |
| |
| /* For discontiguous channel bandwidth */ |
| #define WL_CHANSPEC_CHAN0_MASK 0x000fu |
| #define WL_CHANSPEC_CHAN0_SHIFT 0u |
| #define WL_CHANSPEC_CHAN1_MASK 0x00f0u |
| #define WL_CHANSPEC_CHAN1_SHIFT 4u |
| |
| /* Non-320/Non-240 Mhz channel sideband indication */ |
| #define WL_CHANSPEC_CTL_SB_MASK 0x0700u |
| #define WL_CHANSPEC_CTL_SB_SHIFT 8u |
| #define WL_CHANSPEC_CTL_SB_LLL 0x0000u |
| #define WL_CHANSPEC_CTL_SB_LLU 0x0100u |
| #define WL_CHANSPEC_CTL_SB_LUL 0x0200u |
| #define WL_CHANSPEC_CTL_SB_LUU 0x0300u |
| #define WL_CHANSPEC_CTL_SB_ULL 0x0400u |
| #define WL_CHANSPEC_CTL_SB_ULU 0x0500u |
| #define WL_CHANSPEC_CTL_SB_UUL 0x0600u |
| #define WL_CHANSPEC_CTL_SB_UUU 0x0700u |
| #define WL_CHANSPEC_CTL_SB_LL WL_CHANSPEC_CTL_SB_LLL |
| #define WL_CHANSPEC_CTL_SB_LU WL_CHANSPEC_CTL_SB_LLU |
| #define WL_CHANSPEC_CTL_SB_UL WL_CHANSPEC_CTL_SB_LUL |
| #define WL_CHANSPEC_CTL_SB_UU WL_CHANSPEC_CTL_SB_LUU |
| #define WL_CHANSPEC_CTL_SB_L WL_CHANSPEC_CTL_SB_LLL |
| #define WL_CHANSPEC_CTL_SB_U WL_CHANSPEC_CTL_SB_LLU |
| #define WL_CHANSPEC_CTL_SB_LOWER WL_CHANSPEC_CTL_SB_LLL |
| #define WL_CHANSPEC_CTL_SB_UPPER WL_CHANSPEC_CTL_SB_LLU |
| #define WL_CHANSPEC_CTL_SB_NONE WL_CHANSPEC_CTL_SB_LLL |
| |
| /* channel sideband indication for frequency >= 240MHz */ |
| #define WL_CHANSPEC_GE240_SB_MASK 0x0780u |
| #define WL_CHANSPEC_GE240_SB_SHIFT 7u |
| |
| /* Bandwidth field */ |
| #define WL_CHANSPEC_BW_MASK 0x3800u |
| #define WL_CHANSPEC_BW_SHIFT 11u |
| #define WL_CHANSPEC_BW_320 0x0000u |
| #define WL_CHANSPEC_BW_160160 0x0800u |
| #define WL_CHANSPEC_BW_20 0x1000u |
| #define WL_CHANSPEC_BW_40 0x1800u |
| #define WL_CHANSPEC_BW_80 0x2000u |
| #define WL_CHANSPEC_BW_160 0x2800u |
| #define WL_CHANSPEC_BW_8080 0x3000u |
| #define WL_CHANSPEC_BW_240 0x3800u |
| |
| /* Band field */ |
| #define WL_CHANSPEC_BAND_MASK 0xc000u |
| #define WL_CHANSPEC_BAND_SHIFT 14u |
| #define WL_CHANSPEC_BAND_2G 0x0000u |
| #define WL_CHANSPEC_BAND_6G 0x4000u |
| #define WL_CHANSPEC_BAND_4G 0x8000u |
| #define WL_CHANSPEC_BAND_5G 0xc000u |
| |
| #define INVCHANSPEC 255u |
| #define MAX_CHANSPEC 0xFFFFu |
| |
| #define WL_CHSPEC_BW(chspec) ((chspec & WL_CHANSPEC_BW_MASK) >> WL_CHANSPEC_BW_SHIFT) |
| #define MAX_BW_NUM (uint8)(((WL_CHANSPEC_BW_MASK) >> WL_CHANSPEC_BW_SHIFT)) |
| |
| #define WL_CHANNEL_BAND(ch) (((uint)(ch) <= CH_MAX_2G_CHANNEL) ? \ |
| WL_CHANSPEC_BAND_2G : WL_CHANSPEC_BAND_5G) |
| |
| /* channel defines */ |
| #define LOWER_20_SB(channel) (((channel) > CH_10MHZ_APART) ? \ |
| ((channel) - CH_10MHZ_APART) : 0) |
| #define UPPER_20_SB(channel) (((channel) < (MAXCHANNEL - CH_10MHZ_APART)) ? \ |
| ((channel) + CH_10MHZ_APART) : 0) |
| |
| /* pass a 80MHz channel number (uint8) to get respective LL, UU, LU, UL */ |
| #define LL_20_SB(channel) (((channel) > 3 * CH_10MHZ_APART) ? ((channel) - 3 * CH_10MHZ_APART) : 0) |
| #define UU_20_SB(channel) (((channel) < (MAXCHANNEL - 3 * CH_10MHZ_APART)) ? \ |
| ((channel) + 3 * CH_10MHZ_APART) : 0) |
| #define LU_20_SB(channel) LOWER_20_SB(channel) |
| #define UL_20_SB(channel) UPPER_20_SB(channel) |
| |
| #define LOWER_40_SB(channel) ((channel) - CH_20MHZ_APART) |
| #define UPPER_40_SB(channel) ((channel) + CH_20MHZ_APART) |
| |
| #ifndef CHSPEC_WLCBANDUNIT |
| #define CHSPEC_WLCBANDUNIT(chspec) \ |
| ((CHSPEC_IS5G(chspec) || CHSPEC_IS6G(chspec)) ? BAND_5G_INDEX : BAND_2G_INDEX) |
| #endif |
| #define CH20MHZ_CHSPEC(channel) (chanspec_t)((chanspec_t)(channel) | WL_CHANSPEC_BW_20 | \ |
| WL_CHANNEL_BAND(channel)) |
| #define NEXT_20MHZ_CHAN(channel) (((channel) < (MAXCHANNEL - CH_20MHZ_APART)) ? \ |
| ((channel) + CH_20MHZ_APART) : 0) |
| #define CH40MHZ_CHSPEC(channel, ctlsb) (chanspec_t) \ |
| ((channel) | (ctlsb) | WL_CHANSPEC_BW_40 | \ |
| WL_CHANNEL_BAND(channel)) |
| #define CH80MHZ_CHSPEC(channel, ctlsb) (chanspec_t) \ |
| ((channel) | (ctlsb) | \ |
| WL_CHANSPEC_BW_80 | WL_CHANSPEC_BAND_5G) |
| #define CH160MHZ_CHSPEC(channel, ctlsb) (chanspec_t) \ |
| ((channel) | (ctlsb) | \ |
| WL_CHANSPEC_BW_160 | WL_CHANSPEC_BAND_5G) |
| |
| /* simple MACROs to get different fields of chanspec */ |
| #define CHSPEC_CHANNEL(chspec) ((uint8)((chspec) & WL_CHANSPEC_CHAN_MASK)) |
| #define CHSPEC_CHAN0(chspec) (((chspec) & WL_CHANSPEC_CHAN0_MASK) >> WL_CHANSPEC_CHAN0_SHIFT) |
| #define CHSPEC_CHAN1(chspec) (((chspec) & WL_CHANSPEC_CHAN1_MASK) >> WL_CHANSPEC_CHAN1_SHIFT) |
| #define CHSPEC_BAND(chspec) ((chspec) & WL_CHANSPEC_BAND_MASK) |
| #define CHSPEC_CTL_SB(chspec) ((chspec) & WL_CHANSPEC_CTL_SB_MASK) |
| #define CHSPEC_BW(chspec) ((chspec) & WL_CHANSPEC_BW_MASK) |
| #define CHSPEC_GE240_CHAN(chspec) (((chspec) & WL_CHANSPEC_GE240_CHAN_MASK) >> \ |
| WL_CHANSPEC_GE240_CHAN_SHIFT) |
| #define CHSPEC_GE240_SB(chspec) ((chspec) & WL_CHANSPEC_GE240_SB_MASK) |
| |
| #define CHSPEC_IS20(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_20) |
| #define CHSPEC_IS20_5G(chspec) ((((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_20) && \ |
| CHSPEC_IS5G(chspec)) |
| #ifndef CHSPEC_IS40 |
| #define CHSPEC_IS40(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_40) |
| #endif |
| #ifndef CHSPEC_IS80 |
| #define CHSPEC_IS80(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_80) |
| #endif |
| #ifndef CHSPEC_IS160 |
| #define CHSPEC_IS160(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_160) |
| #endif |
| #define CHSPEC_IS8080(chspec) (FALSE) |
| #ifndef CHSPEC_IS320 |
| #ifdef WL11BE |
| #define CHSPEC_IS320(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_320) |
| #else |
| #define CHSPEC_IS320(chspec) (FALSE) |
| #endif |
| #endif /* CHSPEC_IS320 */ |
| #ifndef CHSPEC_IS240 |
| #ifdef WL11BE |
| #define CHSPEC_IS240(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_240) |
| #else |
| #define CHSPEC_IS240(chspec) (FALSE) |
| #endif |
| #endif /* CHSPEC_IS240 */ |
| |
| /* pass a center channel and get channel offset from it by 10MHz */ |
| #define CH_OFF_10MHZ_MULTIPLES(channel, offset) \ |
| ((uint8) (((offset) < 0) ? \ |
| (((channel) > (WL_CHANSPEC_CHAN_MASK & ((uint16)((-(offset)) * CH_10MHZ_APART)))) ? \ |
| ((channel) + (offset) * CH_10MHZ_APART) : 0) : \ |
| ((((uint16)(channel) + (uint16)(offset) * CH_10MHZ_APART) < (uint16)MAXCHANNEL) ? \ |
| ((channel) + (offset) * CH_10MHZ_APART) : 0))) |
| |
| uint wf_chspec_first_20_sb(chanspec_t chspec); |
| |
| #if defined(WL_BW160MHZ) |
| /* pass a 160MHz center channel to get 20MHz subband channel numbers */ |
| #define LLL_20_SB_160(channel) CH_OFF_10MHZ_MULTIPLES(channel, -7) |
| #define LLU_20_SB_160(channel) CH_OFF_10MHZ_MULTIPLES(channel, -5) |
| #define LUL_20_SB_160(channel) CH_OFF_10MHZ_MULTIPLES(channel, -3) |
| #define LUU_20_SB_160(channel) CH_OFF_10MHZ_MULTIPLES(channel, -1) |
| #define ULL_20_SB_160(channel) CH_OFF_10MHZ_MULTIPLES(channel, 1) |
| #define ULU_20_SB_160(channel) CH_OFF_10MHZ_MULTIPLES(channel, 3) |
| #define UUL_20_SB_160(channel) CH_OFF_10MHZ_MULTIPLES(channel, 5) |
| #define UUU_20_SB_160(channel) CH_OFF_10MHZ_MULTIPLES(channel, 7) |
| |
| /* get lowest 20MHz sideband of a given chspec |
| * (works with 20, 40, 80, 160) |
| */ |
| #define CH_FIRST_20_SB(chspec) ((uint8) (\ |
| CHSPEC_IS160(chspec) ? LLL_20_SB_160(CHSPEC_CHANNEL(chspec)) : (\ |
| CHSPEC_IS80(chspec) ? LL_20_SB(CHSPEC_CHANNEL(chspec)) : (\ |
| CHSPEC_IS40(chspec) ? LOWER_20_SB(CHSPEC_CHANNEL(chspec)) : \ |
| CHSPEC_CHANNEL(chspec))))) |
| |
| /* get upper most 20MHz sideband of a given chspec |
| * (works with 20, 40, 80, 160) |
| */ |
| #define CH_LAST_20_SB(chspec) ((uint8) (\ |
| CHSPEC_IS160(chspec) ? UUU_20_SB_160(CHSPEC_CHANNEL(chspec)) : (\ |
| CHSPEC_IS80(chspec) ? UU_20_SB(CHSPEC_CHANNEL(chspec)) : (\ |
| CHSPEC_IS40(chspec) ? UPPER_20_SB(CHSPEC_CHANNEL(chspec)) : \ |
| CHSPEC_CHANNEL(chspec))))) |
| |
| /* call this with chspec and a valid 20MHz sideband of this channel to get the next 20MHz sideband |
| * (works with 20, 40, 80, 160) |
| * resolves to 0 if called with upper most channel |
| */ |
| #define CH_NEXT_20_SB(chspec, channel) ((uint8) (\ |
| ((uint8) ((channel) + CH_20MHZ_APART) > CH_LAST_20_SB(chspec) ? 0 : \ |
| ((channel) + CH_20MHZ_APART)))) |
| |
| #else /* WL_BW160MHZ */ |
| |
| #define LLL_20_SB_160(channel) 0 |
| #define LLU_20_SB_160(channel) 0 |
| #define LUL_20_SB_160(channel) 0 |
| #define LUU_20_SB_160(channel) 0 |
| #define ULL_20_SB_160(channel) 0 |
| #define ULU_20_SB_160(channel) 0 |
| #define UUL_20_SB_160(channel) 0 |
| #define UUU_20_SB_160(channel) 0 |
| |
| /* get lowest 20MHz sideband of a given chspec |
| * (works with 20, 40, 80) |
| */ |
| #define CH_FIRST_20_SB(chspec) ((uint8) (\ |
| CHSPEC_IS80(chspec) ? LL_20_SB(CHSPEC_CHANNEL(chspec)) : (\ |
| CHSPEC_IS40(chspec) ? LOWER_20_SB(CHSPEC_CHANNEL(chspec)) : \ |
| CHSPEC_CHANNEL(chspec)))) |
| /* get upper most 20MHz sideband of a given chspec |
| * (works with 20, 40, 80, 160) |
| */ |
| #define CH_LAST_20_SB(chspec) ((uint8) (\ |
| CHSPEC_IS80(chspec) ? UU_20_SB(CHSPEC_CHANNEL(chspec)) : (\ |
| CHSPEC_IS40(chspec) ? UPPER_20_SB(CHSPEC_CHANNEL(chspec)) : \ |
| CHSPEC_CHANNEL(chspec)))) |
| |
| /* call this with chspec and a valid 20MHz sideband of this channel to get the next 20MHz sideband |
| * (works with 20, 40, 80, 160) |
| * resolves to 0 if called with upper most channel |
| */ |
| #define CH_NEXT_20_SB(chspec, channel) ((uint8) (\ |
| ((uint8) ((channel) + CH_20MHZ_APART) > CH_LAST_20_SB(chspec) ? 0 : \ |
| ((channel) + CH_20MHZ_APART)))) |
| |
| #endif /* WL_BW160MHZ */ |
| |
| /* Iterator for 20MHz side bands of a chanspec: (chanspec_t chspec, uint8 channel) |
| * 'chspec' chanspec_t of interest (used in loop, better to pass a resolved value than a macro) |
| * 'channel' must be a variable (not an expression). |
| */ |
| #define FOREACH_20_SB(chspec, channel) \ |
| for (channel = (uint8)wf_chspec_first_20_sb(chspec); channel; \ |
| channel = CH_NEXT_20_SB((chspec), channel)) |
| |
| /* Uses iterator to populate array with all side bands involved (sorted lower to upper). |
| * 'chspec' chanspec_t of interest |
| * 'psb' pointer to uint8 array of enough size to hold all side bands for the given chspec |
| */ |
| #define GET_ALL_SB(chspec, psb) do { \ |
| uint8 channel, idx = 0; \ |
| chanspec_t chspec_local = chspec; \ |
| FOREACH_20_SB(chspec_local, channel) \ |
| (psb)[idx++] = channel; \ |
| } while (0) |
| |
| /* given a chanspec of any bw, tests if primary20 SB is in lower 20, 40, 80 respectively */ |
| #define IS_CTL_IN_L20(chspec) !((chspec) & WL_CHANSPEC_CTL_SB_U) /* CTL SB is in low 20 of any 40 */ |
| #define IS_CTL_IN_L40(chspec) !((chspec) & WL_CHANSPEC_CTL_SB_UL) /* in low 40 of any 80 */ |
| #define IS_CTL_IN_L80(chspec) !((chspec) & WL_CHANSPEC_CTL_SB_ULL) /* in low 80 of 160 */ |
| |
| #define BW_LE40(bw) ((bw) == WL_CHANSPEC_BW_20 || ((bw) == WL_CHANSPEC_BW_40)) |
| #define BW_LE80(bw) (BW_LE40(bw) || ((bw) == WL_CHANSPEC_BW_80)) |
| #define BW_LE160(bw) (BW_LE80(bw) || ((bw) == WL_CHANSPEC_BW_160)) |
| |
| #define CHSPEC_IS6G(chspec) (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_6G) |
| #define CHSPEC_IS5G(chspec) (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_5G) |
| #define CHSPEC_IS2G(chspec) (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_2G) |
| #define CHSPEC_SB_UPPER(chspec) \ |
| ((((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_UPPER) && \ |
| (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_40)) |
| #define CHSPEC_SB_LOWER(chspec) \ |
| ((((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_LOWER) && \ |
| (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_40)) |
| |
| #ifdef WL_BAND6G |
| #define CHSPEC2WLC_BAND(chspec) (CHSPEC_IS2G(chspec) ? WLC_BAND_2G : CHSPEC_IS5G(chspec) ? \ |
| WLC_BAND_5G : WLC_BAND_6G) |
| #else |
| #define CHSPEC2WLC_BAND(chspec) (CHSPEC_IS2G(chspec) ? WLC_BAND_2G : WLC_BAND_5G) |
| #endif |
| |
| #define CHSPEC_BW_CHANGED(prev_chspec, curr_chspec) \ |
| (((prev_chspec) & WL_CHANSPEC_BW_MASK) != ((curr_chspec) & WL_CHANSPEC_BW_MASK)) |
| |
| #if (defined(WL_BAND6G) && !defined(WL_BAND6G_DISABLED)) |
| #define CHSPEC_IS_5G_6G(chspec) (CHSPEC_IS5G(chspec) || CHSPEC_IS6G(chspec)) |
| #define CHSPEC_IS20_5G_6G(chspec) ((((chspec) & \ |
| WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_20) && \ |
| (CHSPEC_IS5G(chspec) || CHSPEC_IS6G(chspec))) |
| #else |
| #define CHSPEC_IS_5G_6G(chspec) (CHSPEC_IS5G(chspec)) |
| #define CHSPEC_IS20_5G_6G(chspec) (CHSPEC_IS20_5G(chspec)) |
| #endif |
| |
| /** |
| * Number of chars needed for wf_chspec_ntoa() destination character buffer. |
| */ |
| #ifdef WL11BE |
| #define CHANSPEC_STR_LEN 22 |
| #else |
| #define CHANSPEC_STR_LEN 20 |
| #endif |
| |
| /* |
| * This function returns TRUE if both the chanspec can co-exist in PHY. |
| * Addition to primary20 channel, the function checks for side band for 2g 40 channels |
| */ |
| extern bool wf_chspec_coexist(chanspec_t chspec1, chanspec_t chspec2); |
| |
| #define CHSPEC_IS_BW_160_WIDE(chspec) (CHSPEC_BW(chspec) == WL_CHANSPEC_BW_160 ||\ |
| CHSPEC_BW(chspec) == WL_CHANSPEC_BW_8080) |
| |
| /* BW inequality comparisons, GE (>=), GT (>) */ |
| |
| #define CHSPEC_BW_GE(chspec, bw) (CHSPEC_BW(chspec) >= (bw)) |
| |
| #define CHSPEC_BW_GT(chspec, bw) (CHSPEC_BW(chspec) > (bw)) |
| |
| /* Legacy Chanspec defines |
| * These are the defines for the previous format of the chanspec_t |
| */ |
| #define WL_LCHANSPEC_CHAN_MASK 0x00ff |
| #define WL_LCHANSPEC_CHAN_SHIFT 0 |
| |
| #define WL_LCHANSPEC_CTL_SB_MASK 0x0300 |
| #define WL_LCHANSPEC_CTL_SB_SHIFT 8 |
| #define WL_LCHANSPEC_CTL_SB_LOWER 0x0100 |
| #define WL_LCHANSPEC_CTL_SB_UPPER 0x0200 |
| #define WL_LCHANSPEC_CTL_SB_NONE 0x0300 |
| |
| #define WL_LCHANSPEC_BW_MASK 0x0C00 |
| #define WL_LCHANSPEC_BW_SHIFT 10 |
| #define WL_LCHANSPEC_BW_10 0x0400 |
| #define WL_LCHANSPEC_BW_20 0x0800 |
| #define WL_LCHANSPEC_BW_40 0x0C00 |
| |
| #define WL_LCHANSPEC_BAND_MASK 0xf000 |
| #define WL_LCHANSPEC_BAND_SHIFT 12 |
| #define WL_LCHANSPEC_BAND_5G 0x1000 |
| #define WL_LCHANSPEC_BAND_2G 0x2000 |
| |
| #define LCHSPEC_CHANNEL(chspec) ((uint8)((chspec) & WL_LCHANSPEC_CHAN_MASK)) |
| #define LCHSPEC_BAND(chspec) ((chspec) & WL_LCHANSPEC_BAND_MASK) |
| #define LCHSPEC_CTL_SB(chspec) ((chspec) & WL_LCHANSPEC_CTL_SB_MASK) |
| #define LCHSPEC_BW(chspec) ((chspec) & WL_LCHANSPEC_BW_MASK) |
| #define LCHSPEC_IS20(chspec) (((chspec) & WL_LCHANSPEC_BW_MASK) == WL_LCHANSPEC_BW_20) |
| #define LCHSPEC_IS40(chspec) (((chspec) & WL_LCHANSPEC_BW_MASK) == WL_LCHANSPEC_BW_40) |
| #define LCHSPEC_IS5G(chspec) (((chspec) & WL_LCHANSPEC_BAND_MASK) == WL_LCHANSPEC_BAND_5G) |
| #define LCHSPEC_IS2G(chspec) (((chspec) & WL_LCHANSPEC_BAND_MASK) == WL_LCHANSPEC_BAND_2G) |
| |
| #define LCHSPEC_SB_UPPER(chspec) \ |
| ((((chspec) & WL_LCHANSPEC_CTL_SB_MASK) == WL_LCHANSPEC_CTL_SB_UPPER) && \ |
| (((chspec) & WL_LCHANSPEC_BW_MASK) == WL_LCHANSPEC_BW_40)) |
| #define LCHSPEC_SB_LOWER(chspec) \ |
| ((((chspec) & WL_LCHANSPEC_CTL_SB_MASK) == WL_LCHANSPEC_CTL_SB_LOWER) && \ |
| (((chspec) & WL_LCHANSPEC_BW_MASK) == WL_LCHANSPEC_BW_40)) |
| |
| #define LCHSPEC_CREATE(chan, band, bw, sb) ((uint16)((chan) | (sb) | (bw) | (band))) |
| |
| #define CH20MHZ_LCHSPEC(channel) \ |
| (chanspec_t)((chanspec_t)(channel) | WL_LCHANSPEC_BW_20 | \ |
| WL_LCHANSPEC_CTL_SB_NONE | (((channel) <= CH_MAX_2G_CHANNEL) ? \ |
| WL_LCHANSPEC_BAND_2G : WL_LCHANSPEC_BAND_5G)) |
| |
| #define GET_ALL_EXT wf_get_all_ext |
| |
| /* |
| * WF_CHAN_FACTOR_* constants are used to calculate channel frequency |
| * given a channel number. |
| * chan_freq = chan_factor * 500Mhz + chan_number * 5 |
| */ |
| |
| /** |
| * Channel Factor for the starting frequence of 2.4 GHz channels. |
| * The value corresponds to 2407 MHz. |
| */ |
| #define WF_CHAN_FACTOR_2_4_G 4814u /* 2.4 GHz band, 2407 MHz */ |
| |
| /** |
| * Channel Factor for the starting frequence of 4.9 GHz channels. |
| * The value corresponds to 4000 MHz. |
| */ |
| #define WF_CHAN_FACTOR_4_G 8000u /* 4.9 GHz band for Japan */ |
| |
| /** |
| * Channel Factor for the starting frequence of 5 GHz channels. |
| * The value corresponds to 5000 MHz. |
| */ |
| #define WF_CHAN_FACTOR_5_G 10000u /* 5 GHz band, 5000 MHz */ |
| |
| /** |
| * Channel Factor for the starting frequence of 6 GHz channels. |
| * The value corresponds to 5940 MHz. |
| */ |
| #define WF_CHAN_FACTOR_6_G 11900u /* 6 GHz band, 5950 MHz */ |
| |
| #define WLC_2G_25MHZ_OFFSET 5 /* 2.4GHz band channel offset */ |
| |
| /** |
| * No of sub-band value of the specified Mhz chanspec |
| */ |
| #define WF_NUM_SIDEBANDS_40MHZ 2u |
| #define WF_NUM_SIDEBANDS_80MHZ 4u |
| #define WF_NUM_SIDEBANDS_160MHZ 8u |
| |
| /** |
| * Return the chanspec bandwidth in MHz |
| */ |
| uint wf_bw_chspec_to_mhz(chanspec_t chspec); |
| |
| /** |
| * Return the bandwidth string for a given chanspec |
| */ |
| const char *wf_chspec_to_bw_str(chanspec_t chspec); |
| |
| /** |
| * Convert chanspec to ascii string, or formats hex of an invalid chanspec. |
| */ |
| char * wf_chspec_ntoa_ex(chanspec_t chspec, char *buf); |
| |
| /** |
| * Convert chanspec to ascii string, or returns NULL on error. |
| */ |
| char * wf_chspec_ntoa(chanspec_t chspec, char *buf); |
| |
| /** |
| * Convert ascii string to chanspec |
| */ |
| chanspec_t wf_chspec_aton(const char *a); |
| |
| /** |
| * Verify the chanspec fields are valid for a chanspec_t |
| */ |
| bool wf_chspec_malformed(chanspec_t chanspec); |
| |
| /** |
| * Verify the chanspec specifies a valid channel according to 802.11. |
| */ |
| bool wf_chspec_valid(chanspec_t chanspec); |
| |
| /** |
| * Verify that the channel is a valid 20MHz channel according to 802.11. |
| */ |
| bool wf_valid_20MHz_chan(uint channel, chanspec_band_t band); |
| |
| /** |
| * Verify that the center channel is a valid 40MHz center channel according to 802.11. |
| */ |
| bool wf_valid_40MHz_center_chan(uint center_channel, chanspec_band_t band); |
| |
| /** |
| * Verify that the center channel is a valid 80MHz center channel according to 802.11. |
| */ |
| bool wf_valid_80MHz_center_chan(uint center_channel, chanspec_band_t band); |
| |
| /** |
| * Verify that the center channel is a valid 160MHz center channel according to 802.11. |
| */ |
| bool wf_valid_160MHz_center_chan(uint center_channel, chanspec_band_t band); |
| |
| /** |
| * Verify that the center channel is a valid 240MHz center channel according to 802.11. |
| */ |
| bool wf_valid_240MHz_center_chan(uint center_channel, chanspec_band_t band); |
| |
| /** |
| * Verify that the center channel is a valid 320MHz center channel according to 802.11. |
| */ |
| bool wf_valid_320MHz_center_chan(uint center_channel, chanspec_band_t band); |
| |
| /** |
| * Create a 20MHz chanspec for the given band. |
| */ |
| chanspec_t wf_create_20MHz_chspec(uint channel, chanspec_band_t band); |
| |
| /** |
| * Returns the chanspec for a 40MHz channel given the primary 20MHz channel number, |
| * the center channel number, and the band. |
| */ |
| chanspec_t wf_create_40MHz_chspec(uint primary_channel, uint center_channel, |
| chanspec_band_t band); |
| |
| /** |
| * Returns the chanspec for a 40MHz channel given the primary 20MHz channel number, |
| * the sub-band for the primary 20MHz channel, and the band. |
| */ |
| chanspec_t wf_create_40MHz_chspec_primary_sb(uint primary_channel, |
| chanspec_subband_t primary_subband, |
| chanspec_band_t band); |
| /** |
| * Returns the chanspec for an 80MHz channel given the primary 20MHz channel number, |
| * the center channel number, and the band. |
| */ |
| chanspec_t wf_create_80MHz_chspec(uint primary_channel, uint center_channel, |
| chanspec_band_t band); |
| |
| /** |
| * Returns the chanspec for an 160MHz channel given the primary 20MHz channel number, |
| * the center channel number, and the band. |
| */ |
| chanspec_t wf_create_160MHz_chspec(uint primary_channel, uint center_channel, |
| chanspec_band_t band); |
| |
| /** |
| * Returns the chanspec for an 240MHz channel given the primary 20MHz channel number, |
| * the center channel number, and the band. |
| */ |
| chanspec_t wf_create_240MHz_chspec(uint primary_channel, uint center_channel, |
| chanspec_band_t band); |
| |
| /** |
| * Returns the chanspec for an 320MHz channel given the primary 20MHz channel number, |
| * the center channel number, and the band. |
| */ |
| chanspec_t wf_create_320MHz_chspec(uint primary_channel, uint center_channel, |
| chanspec_band_t band); |
| |
| /** |
| * Returns the chanspec for an 80+80MHz channel given the primary 20MHz channel number, |
| * the center channel numbers for each frequency segment, and the band. |
| */ |
| chanspec_t wf_create_8080MHz_chspec(uint primary_channel, uint chan0, uint chan1, |
| chanspec_band_t band); |
| |
| /** |
| * Returns the chanspec for an 160+160MHz channel given the primary 20MHz channel number, |
| * the center channel numbers for each frequency segment, and the band. |
| */ |
| chanspec_t wf_create_160160MHz_chspec(uint primary_channel, uint chan0, uint chan1, |
| chanspec_band_t band); |
| /** |
| * Returns the chanspec given the primary 20MHz channel number, |
| * the center channel number, channel width, and the band. |
| * |
| * The channel width must be 20, 40, 80, or 160 MHz. |
| */ |
| chanspec_t wf_create_chspec(uint primary_channel, uint center_channel, |
| chanspec_bw_t bw, chanspec_band_t band); |
| |
| /** |
| * Returns the chanspec given the primary 20MHz channel number, |
| * channel width, and the band. |
| */ |
| chanspec_t wf_create_chspec_from_primary(uint primary_channel, chanspec_bw_t bw, |
| chanspec_band_t band); |
| |
| /** |
| * Returns the chanspec given the index of primary 20MHz channel within whole |
| * channel, the center channel number, channel width, and the band. |
| * |
| * The channel width must be 20, 40, 80, or 160 MHz. |
| */ |
| chanspec_t wf_create_chspec_sb(uint sb, uint center_channel, chanspec_bw_t bw, |
| chanspec_band_t band); |
| |
| /** |
| * Returns the chanspec for an 160+160MHz channel given the index of primary 20MHz |
| * channel within whole channel pair (0-3 if within chan0, 4-7 if within chan1), |
| * the center channel numbers for each frequency segment, and the band. |
| */ |
| chanspec_t wf_create_160160MHz_chspec_sb(uint sb, uint chan0, uint chan1, |
| chanspec_band_t band); |
| |
| /** |
| * Return the primary 20MHz channel. |
| */ |
| uint8 wf_chspec_primary20_chan(chanspec_t chspec); |
| |
| /* alias for old function name */ |
| #define wf_chspec_ctlchan(c) wf_chspec_primary20_chan(c) |
| |
| /** |
| * Return the primary 20MHz chanspec of a given chanspec |
| */ |
| chanspec_t wf_chspec_primary20_chspec(chanspec_t chspec); |
| |
| /* alias for old function name */ |
| #define wf_chspec_ctlchspec(c) wf_chspec_primary20_chspec(c) |
| |
| /** |
| * Return the primary 40MHz chanspec for a 40MHz or wider channel |
| */ |
| chanspec_t wf_chspec_primary40_chspec(chanspec_t chspec); |
| |
| /** |
| * Return the channel number for a given frequency and base frequency |
| */ |
| int wf_mhz2channel(uint freq, uint start_factor); |
| |
| /** |
| * Return the center frequency in MHz of the given channel and base frequency. |
| */ |
| int wf_channel2mhz(uint channel, uint start_factor); |
| |
| /** |
| * Returns the chanspec 80Mhz channel corresponding to the following input |
| * parameters |
| * |
| * primary_channel - primary 20Mhz channel |
| * center_channel - center frequecny of the 80Mhz channel |
| * |
| * The center_channel can be one of {42, 58, 106, 122, 138, 155} |
| * |
| * returns INVCHANSPEC in case of error |
| */ |
| extern chanspec_t wf_chspec_80(uint8 center_channel, uint8 primary_channel); |
| |
| /** |
| * Convert ctl chan and bw to chanspec |
| * |
| * @param ctl_ch channel |
| * @param bw bandwidth |
| * |
| * @return > 0 if successful or 0 otherwise |
| * |
| */ |
| extern uint16 wf_channel2chspec(uint ctl_ch, uint bw); |
| |
| /* |
| * Returns the 80+80 MHz chanspec corresponding to the following input parameters |
| * |
| * primary_20mhz - Primary 20 MHz channel |
| * chan0_80MHz - center channel number of one frequency segment |
| * chan1_80MHz - center channel number of the other frequency segment |
| * |
| * Parameters chan0_80MHz and chan1_80MHz are channel numbers in {42, 58, 106, 122, 138, 155}. |
| * The primary channel must be contained in one of the 80MHz channels. This routine |
| * will determine which frequency segment is the primary 80 MHz segment. |
| * |
| * Returns INVCHANSPEC in case of error. |
| * |
| * Refer to 802.11-2016 section 22.3.14 "Channelization". |
| */ |
| extern chanspec_t wf_chspec_get8080_chspec(uint8 primary_20mhz, |
| uint8 chan0_80Mhz, uint8 chan1_80Mhz); |
| |
| /** |
| * Returns the center channel of the primary 80 MHz sub-band of the provided chanspec |
| * |
| * @param chspec input chanspec |
| * |
| * @return center channel number of the primary 80MHz sub-band of the input. |
| * Will return the center channel of an input 80MHz chspec. |
| * Will return INVCHANNEL if the chspec is malformed or less than 80MHz bw. |
| */ |
| extern uint8 wf_chspec_primary80_channel(chanspec_t chanspec); |
| |
| /** |
| * Returns the center channel of the secondary 80 MHz sub-band of the provided chanspec |
| * |
| * @param chspec input chanspec |
| * |
| * @return center channel number of the secondary 80MHz sub-band of the input. |
| * Will return INVCHANNEL if the chspec is malformed or bw is not greater than 80MHz. |
| */ |
| extern uint8 wf_chspec_secondary80_channel(chanspec_t chanspec); |
| |
| /** |
| * Returns the chanspec for the primary 80MHz sub-band of an 160MHz or 80+80 channel |
| * |
| * @param chspec input chanspec |
| * |
| * @return An 80MHz chanspec describing the primary 80MHz sub-band of the input. |
| * Will return an input 80MHz chspec as is. |
| * Will return INVCHANSPEC if the chspec is malformed or less than 80MHz bw. |
| */ |
| extern chanspec_t wf_chspec_primary80_chspec(chanspec_t chspec); |
| |
| /** |
| * Returns the chanspec for the secondary 80MHz sub-band of an 160MHz or 80+80 channel |
| * The sideband in the chanspec is always set to WL_CHANSPEC_CTL_SB_LL since this sub-band |
| * does not contain the primary 20MHz channel. |
| * |
| * @param chspec input chanspec |
| * |
| * @return An 80MHz chanspec describing the secondary 80MHz sub-band of the input. |
| * Will return INVCHANSPEC if the chspec is malformed or bw is not greater than 80MHz. |
| */ |
| extern chanspec_t wf_chspec_secondary80_chspec(chanspec_t chspec); |
| |
| /** |
| * Returns the center channel of the primary 160MHz sub-band of the provided chanspec |
| * |
| * @param chspec input chanspec |
| * |
| * @return center channel number of the primary 160MHz sub-band of the input. |
| * Will return the center channel of an input 160MHz chspec. |
| * Will return INVCHANNEL if the chspec is malformed or less than 160MHz bw. |
| */ |
| extern uint8 wf_chspec_primary160_channel(chanspec_t chanspec); |
| |
| /** |
| * Returns the chanspec for the primary 160MHz sub-band of an 320MHz channel |
| * |
| * @param chspec input chanspec |
| * |
| * @return An 160MHz chanspec describing the primary 160MHz sub-band of the input. |
| * Will return an input 160MHz chspec as is. |
| * Will return INVCHANSPEC if the chspec is malformed or less than 160MHz bw. |
| */ |
| extern chanspec_t wf_chspec_primary160_chspec(chanspec_t chspec); |
| |
| /* |
| * For 160MHz or 80P80 chanspec, set ch[0]/ch[1] to be the low/high 80 Mhz channels |
| * |
| * For 20/40/80MHz chanspec, set ch[0] to be the center freq, and chan[1]=-1 |
| */ |
| extern void wf_chspec_get_80p80_channels(chanspec_t chspec, uint8 *ch); |
| |
| /* wf_chanspec_iter_... iterator API is deprecated. Use wlc_clm_chanspec_iter_... API instead */ |
| |
| struct wf_iter_range { |
| uint8 start; |
| uint8 end; |
| }; |
| |
| /* Internal structure for wf_chanspec_iter_* functions. |
| * Do not directly access the members. Only use the related |
| * functions to query and manipulate the structure. |
| */ |
| typedef struct chanspec_iter { |
| uint8 state; |
| chanspec_t chanspec; |
| chanspec_band_t band; |
| chanspec_bw_t bw; |
| struct wf_iter_range range; |
| union { |
| uint8 range_id; |
| struct { |
| uint8 ch0; |
| uint8 ch1; |
| }; |
| }; |
| } wf_chanspec_iter_t; |
| |
| /** |
| * Initialize a chanspec iteration structure. |
| * The parameters define the set of chanspecs to generate in the iteration. |
| * After initialization wf_chanspec_iter_current() will return the first chanspec |
| * in the set. A call to wf_chanspec_iter_next() will advance the interation |
| * to the next chanspec in the set. |
| * |
| * Example use: |
| * wf_chanspec_iter_t iter; |
| * chanspec_t chanspec; |
| * |
| * wf_chanspec_iter_init(&iter, band, bw); |
| * |
| * while (wf_chanspec_iter_next(&iter, &chanspec)) { |
| * ... do some work ... |
| * } |
| * |
| * @param iter pointer to a wf_chanspec_iter_t structure to initialize |
| * @param band chanspec_band_t value specifying the band of interest |
| * @param bw chanspec_bw_t value specifying the bandwidth of interest, |
| * or INVCHANSPEC to specify all bandwidths |
| * |
| * @return a success value, FALSE on error, or TRUE if OK |
| */ |
| bool wf_chanspec_iter_init(wf_chanspec_iter_t *iter, chanspec_band_t band, chanspec_bw_t bw); |
| |
| /** |
| * Advance the iteration to the next chanspec in the set. |
| * |
| * @param iter pointer to a wf_chanspec_iter_t structure |
| * @param chspec pointer to storage for the next chanspec. Return value will be INVCHANSPEC |
| * if the iteration ended. Pass in NULL if return value is not desired. |
| * |
| * @return a success value, TRUE if there was another chanspec in the iteration, FALSE if not |
| */ |
| bool wf_chanspec_iter_next(wf_chanspec_iter_t *iter, chanspec_t *chspec); |
| |
| /** |
| * Return the current chanspec of the iteration. |
| * |
| * @param iter pointer to a wf_chanspec_iter_t structure |
| * |
| * @return the current chanspec_t |
| */ |
| chanspec_t wf_chanspec_iter_current(wf_chanspec_iter_t *iter); |
| |
| /* Populates array with all 20MHz side bands of a given chanspec_t in the following order: |
| * primary20, ext20, two ext40s, four ext80s. |
| * 'chspec' is the chanspec of interest |
| * 'pext' must point to an uint8 array of long enough to hold all side bands of the given chspec |
| * |
| * Works with 20, 40, 80 and 160MHz chspec |
| */ |
| |
| extern void wf_get_all_ext(chanspec_t chspec, uint8 *chan_ptr); |
| |
| /* |
| * Given two chanspecs, returns true if they overlap. |
| * (Overlap: At least one 20MHz subband is common between the two chanspecs provided) |
| */ |
| extern bool wf_chspec_overlap(chanspec_t chspec0, chanspec_t chspec1); |
| |
| extern uint8 channel_bw_to_width(chanspec_t chspec); |
| |
| uint8 wf_chspec_320_id2cch(chanspec_t chanspec); |
| |
| uint8 wf_chspec_240_id2cch(chanspec_t chanspec); |
| |
| #endif /* _bcmwifi_channels_h_ */ |