| # File : arpfilter.conf |
| |
| ######################### Host Sleep ARP/IP filtering command ################## |
| # add arp filter |
| # firmware supports 8 entries of ARP_FILTER. Each entry has 8 bytes. |
| # must not exceed 8x8+4=68 bytes |
| |
| arpfilter={ |
| TlvType:2=0x0115 |
| TlvLength:2={ |
| AddrType:2=3 # multicast |
| EthType:2=0xffff # Any |
| Ipv4Addr:4=0xffffffff # Any |
| AddrType:2=1 # broadcast |
| EthType:2=0x0608 # ARP: 0x0806 |
| Ipv4Addr:4=0x6200a8c0 # 192.168.0.98 |
| AddrType:2=2 # unicast |
| EthType:2=0xffff # Any |
| Ipv4Addr:4=0xffffffff # Any |
| } |
| } |
| |
| # remove arp filter |
| #arpfilter={ |
| # TlvType:2=0x0115 |
| # TlvLength:2={ |
| # } |
| #} |
| ######################### Host Sleep ARP/IP filtering command ################## |