| # File : txrate_cfg.conf |
| |
| ## Tx Rate Configuration command |
| txrate_cfg_get={ |
| CmdCode=0x00d6 # do NOT change this line |
| Action:2=0 # 0 - GET |
| Index:2=0 # do NOT change this line |
| |
| TxRateScope.TlvType:2=0x0153 |
| TxRateScope.TlvLength:2={ |
| } |
| } |
| |
| txrate_cfg_set_bg={ |
| CmdCode=0x00d6 # do NOT change this line |
| |
| Action:2=1 # 1 - SET |
| Index:2=0 # do NOT change this line |
| |
| TxRateScope.TlvType:2=0x0153 |
| TxRateScope.TlvLength:2={ |
| ################# TXRATE SCOPE ###################### |
| |
| # The following table shows the bitmap of the rates: |
| # (bit 0 is the least significant bit) |
| # Bit Data rate |
| # 0 1 Mbps |
| # 1 2 Mbps |
| # 2 5.5 Mbps |
| # 3 11 Mbps |
| # 4 Reserved |
| HRDSSS.RateScope:2=0x0000 |
| |
| # The following table shows the bitmap of the rates: |
| # (bit 0 is the least significant bit) |
| # Bit Data rate |
| # 0 6 Mbps |
| # 1 9 Mbps |
| # 2 12 Mbps |
| # 3 18 Mbps |
| # 4 24 Mbps |
| # 5 36 Mbps |
| # 6 48 Mbps |
| # 7 54 Mbps |
| OFDM.RateScope:2=0x0080 |
| |
| # The following table shows the bitmap of the rates: |
| # (bit 0 is the least significant bit) |
| # Bit Data rate |
| # 0 MCS0 |
| # 1 MCS1 |
| # 2 MCS2 |
| # 3 MCS3 |
| # 4 MCS4 |
| # 5 MCS5 |
| # 6 MCS6 |
| # 7 MCS7 |
| # 32 MCS32 |
| HT.RateScopeDword0:4=0x00000000 |
| HT.RateScopeDword1:4=0x00000000 |
| HT.RateScopeDword2:4=0x00000000 |
| HT.RateScopeDword3:4=0x00000000 |
| } |
| |
| TxRateDrop.TlvType:2=0x0151 |
| TxRateDrop.TlvLength:2={ |
| RateDrop.Mode:4=0x00000001 |
| } |
| } |
| |
| txrate_cfg_set_bgn={ |
| CmdCode=0x00d6 # do NOT change this line |
| |
| Action:2=1 # 1 - SET |
| Index:2=0 # do NOT change this line |
| |
| TxRateScope.TlvType:2=0x0153 |
| TxRateScope.TlvLength:2={ |
| ################# TXRATE SCOPE ###################### |
| |
| # The following table shows the bitmap of the rates: |
| # (bit 0 is the least significant bit) |
| # Bit Data rate |
| # 0 1 Mbps |
| # 1 2 Mbps |
| # 2 5.5 Mbps |
| # 3 11 Mbps |
| # 4 Reserved |
| HRDSSS.RateScope:2=0x0000 |
| |
| # The following table shows the bitmap of the rates: |
| # (bit 0 is the least significant bit) |
| # Bit Data rate |
| # 0 6 Mbps |
| # 1 9 Mbps |
| # 2 12 Mbps |
| # 3 18 Mbps |
| # 4 24 Mbps |
| # 5 36 Mbps |
| # 6 48 Mbps |
| # 7 54 Mbps |
| OFDM.RateScope:2=0x0000 |
| |
| # The following table shows the bitmap of the rates: |
| # (bit 0 is the least significant bit) |
| # Bit Data rate |
| # 0 MCS0 |
| # 1 MCS1 |
| # 2 MCS2 |
| # 3 MCS3 |
| # 4 MCS4 |
| # 5 MCS5 |
| # 6 MCS6 |
| # 7 MCS7 |
| # 32 MCS32 |
| HT.RateScopeDword0:4=0x00000080 |
| HT.RateScopeDword1:4=0x00000000 |
| HT.RateScopeDword2:4=0x00000000 |
| HT.RateScopeDword3:4=0x00000000 |
| } |
| |
| TxRateDrop.TlvType:2=0x0151 |
| TxRateDrop.TlvLength:2={ |
| RateDrop.Mode:4=0x00000001 |
| } |
| } |
| |
| ########supported BasicRate setting########### |
| basic_rate_get={ |
| CmdCode=0x00d6 # do NOT change this line |
| Action:2=0 # 0 - GET |
| Index:2=0 # do NOT change this line |
| |
| TlvType:2=0x21a |
| TlvLength:2={ |
| } |
| } |
| |
| basic_rate_set={ |
| CmdCode=0x00d6 # do NOT change this line |
| |
| Action:2=1 # 1 - SET |
| Index:2=0 # do NOT change this line |
| |
| TlvType:2=0x21a |
| TlvLength:2={ |
| BasicRateSupport:2=0x000f #defalt value |
| |
| # The following table shows the bitmap of the rates: |
| # (bit 0 is the least significant bit) |
| # Bit BasicRateSupport |
| # 0 DBPSK1Mbps |
| # 1 DQPSK2Mbps |
| # 2 CCK5_5Mbps |
| # 3 CCK11Mbps |
| # 4 Not used. |
| # 5 OFDM6Mbps |
| # 6 OFDM9Mbps |
| # 7 OFDM12Mbps |
| # 8 OFDM18Mbps |
| # 9 OFDM24Mbps |
| # 10 OFDM36Mbps |
| # 11 OFDM48Mbps |
| # 12 OFDM54Mbps |
| # 13-15 Reserved |
| #note: value0x0 represents no setting value |
| #For example: |
| #BasicRateSupport:2=0x3 set supported BasicRate to DBPSK1Mbps, DQPSK2Mbps |
| #BasicRateSupport:2=0x180 set supported BasicRate to OFDM18Mbps, OFDM12Mbps |
| } |
| } |