| # File : uaputl.conf |
| |
| |
| ap_config={ |
| SSID="Marvell Micro AP" # SSID of Micro AP, use '\' as an escape character before '"' character in SSID |
| BeaconPeriod=100 # Beacon period in TU |
| Channel=6 # Radio Channel 6 |
| # Channel=0,1 # auto channel select (MCS mode) |
| # Channel=6,2 # primary channel 6, secondary channel above. |
| # Channel=6,4 # primary channel 6, secondary channel below |
| ChanList=1,6,11 # Scan channel list |
| # AP_MAC=00:34:22:77:46:41 # MAC address of AP |
| Band=0 # 0 for 2.4GHz band |
| # 1 for 5GHz band |
| Rate=0x82,0x84,0x8b,0x96,0x0C,0x12,0x18,0x24,0x30,0x48,0x60,0x6c |
| # Set of data rate that a station |
| # in the BSS may use |
| # (in unit of 500 kilobit/s) |
| TxPowerLevel=13 # Transmit power level in dBm |
| BroadcastSSID=1 # Broadcast SSID feature |
| # 1: Enable 0:Disable |
| RTSThreshold=2347 # RTS threshold value |
| FragThreshold=2346 # Fragmentation threshold value |
| DTIMPeriod=1 # DTIM period in beacon periods |
| MCBCdataRate=0 # MCBC rate to use for packet transmission |
| # 0:auto |
| # >0 fix rate (in unit of 500 kilobit/s) |
| # TxBeaconRate=0 # Beacon rate to use for Beacon transmission |
| # 0:auto |
| # >0 fix rate (in unit of 500 kilobit/s) |
| PktFwdCtl=1 # Packet forwarding control |
| # 0: forward all packets to the host |
| # 1: firmware handles intr-BSS packets |
| StaAgeoutTimer=1800 # Inactive client station age out timer value |
| # in units of 100ms |
| PSStaAgeoutTimer=400 # Inactive client PS station age out timer value |
| # in units of 100ms |
| MaxStaNum=10 # Max number of stations allowed to connect |
| Retrylimit=7 # Retry limit to use for packet transmissions |
| AuthMode=0 # 0:Open authentication |
| # 1:shared key authentication |
| Protocol=1 # protocol to use |
| # 1: No security 2: Static WEP |
| # 8: WPA 32: WPA2 40:WPA2 Mixed Mode |
| RSNReplayProtection=0 # RSN replay protection 0: disabled, 1: enabled |
| PairwiseUpdateTimeout=100 #Pairwise Handshake update timeout: 100ms |
| PairwiseHandshakeRetries=3 #Pairwise Handshake retries: 3 |
| GroupwiseUpdateTimeout=100 #Groupwise Handshake update timeout: 100ms |
| GroupwiseHandshakeRetries=3 #Groupwise Handshake retries: 3 |
| |
| # **** WEP security setting****** |
| # KeyIndex=0 # Index of WEP key to use (0 to 3) |
| # Sample Key configurations are |
| # Key_0="55555" |
| # Key_1=1234567890 |
| # Key_2="1234567890123" |
| # Key_3=12345678901234567890123456 |
| |
| # **** Pairwise Cipher setting****** |
| # Configure both of the following for Protocol=40 |
| # PwkCipherWPA=4 # Pairwise cipher type |
| # 4: TKIP 8: AES CCMP |
| # 12: AES CCMP + TKIP |
| # PwkCipherWPA2=8 # Pairwise cipher type |
| # 4: TKIP 8: AES CCMP |
| # 12: AES CCMP + TKIP |
| |
| # **** Group Cipher setting****** |
| |
| # GwkCipher=4 # group cipher type |
| # 4: TKIP 8: AES CCMP |
| |
| # PSK="1234567890" # WPA/WPA2 passphrase |
| GroupRekeyTime= 86400 # Group key re-key interval, in second. |
| # 0 mean never re-key |
| |
| Enable11n=1 # 1 to enable, 0 to disable |
| HTCapInfo=0x111c # HTCapInfo |
| # Bit 15-13: Reserved set to 0 |
| # Bit 12: DSS/CCK mode in 40MHz enable/disable |
| # Bit 11-10: Reserved set to 0 |
| # Bit 9-8: Reserved set to 0x01 |
| # Bit 7: Reserved set to 0 |
| # Bit 6: Short GI in 40 Mhz enable/disable |
| # Bit 5: Short GI in 20 Mhz enable/disable |
| # Bit 4: Green field enable/disble |
| # Bit 3-2: Reserved set to 1 |
| # Bit 1: 20/40 Mhz enable disable. |
| # Bit 0: Reserved set to 0 |
| AMPDU=0x03 # AMPDU |
| # Bit 7-5: Reserved set to 0 |
| # Bit 4-2: Minimum MPDU Start spacing |
| # Set to 0 for no restriction |
| # Set to 1 for 1/4 us |
| # Set to 2 for 1/2 us |
| # Set to 3 for 1 us |
| # Set to 4 for 2 us |
| # Set to 5 for 4 us |
| # Set to 6 for 8 us |
| # Set to 7 for 16 us |
| # Bit 1-0: Max A-MPDU length |
| HT_MCS_MAP=0x0000ffff # Bit 7-0: MCS_SET_0 |
| # Bit 15-8:MCS_SET_1 |
| # Enable2040Coex=1 #Enable 20/40 coex feature |
| |
| #802.11D specific configuration |
| 11d_enable=0 # 0-disable 1-enable |
| # country=US # country information |
| |
| } |
| |
| |
| |
| ap_mac_filter={ |
| FilterMode=0 # Mode of filter table |
| # 0: filter table is disabled |
| # 1: allow MAC address in the filter table to associate |
| # 2: block MAC address in the filter table |
| Count=0 # Number of entries in filter table,up to 16 |
| #Sample mac settings are |
| # mac_1=00:50:23:45:76:22 # mac address |
| # mac_2=00:34:22:77:46:34 # mac address |
| } |
| |
| # Wmm param setting |
| Wmm_parameters={ |
| Qos_info=0x80 |
| AC_BE |
| Aifsn=1 |
| Ecw_max=1 |
| Ecw_min=1 |
| Tx_op=1 |
| AC_BK |
| Aifsn=2 |
| Ecw_max=2 |
| Ecw_min=2 |
| Tx_op=2 |
| AC_VI |
| Aifsn=3 |
| Ecw_max=3 |
| Ecw_min=3 |
| Tx_op=3 |
| AC_VO |
| Aifsn=4 |
| Ecw_max=4 |
| Ecw_min=4 |
| Tx_op=4 |
| } |
| |
