| # File : wifidisplay.conf |
| |
| ######################### WiFiDisplay Configuration command ################## |
| |
| wifidisplay_config={ |
| # Arrange in order of subelement Ids |
| |
| display_dev_info={ |
| device_info=19 |
| mgmt_control_port=554 |
| device_throuput=54 |
| } |
| display_assoc_bssid={ |
| } |
| display_coupled_sink={ |
| coupled_sink_bitmap=0 |
| } |
| display_session_info={ |
| } |
| #display_alternate_mac={ |
| # alternate_mac=00:50:43:00:00:00 |
| #} |
| } |
| |
| ######################### WIFIDIRECT service discovery command ################## |
| |
| wifidisplay_discovery_request={ |
| PeerAddr=00:50:43:00:00:00 |
| Category=4 |
| Action=10 |
| DialogToken=1 |
| AdvertizementProtocolIE=0x6c,0x02,0x00,0x00 |
| # octet 1: Element Id = 108 ( 0x6c) |
| # octer 2: Length of following fields |
| # octer 3: Bit7: PAME-BI ( Message Exchange BSSID independant) |
| # Bits0-6: Query response length limit. |
| # octer 4: Advertizement Protocol ID |
| QueryRequestLen={ |
| InfoId=0xDD,0xDD |
| RequestLen={ |
| OUI=0x50,0x6F,0x9A |
| OUISubType=10 |
| ServiceUpdateIndicator=0 |
| VendorLen={ |
| ServiceProtocol=4 # 0: All service protocol types |
| # 1: Bonjour, 2: uPnP, 3: WS-Discovery |
| # 4: Wifi Display |
| # 255: Vendor specific |
| ServiceTransactionId=1 |
| QueryData={ |
| } |
| } |
| } |
| } |
| } |
| |
| wifidisplay_discovery_response={ |
| PeerAddr=00:50:43:00:00:00 |
| Category=4 |
| Action=11 |
| DialogToken=1 |
| StatusCode=0 |
| GasComebackDelay=0x0000 |
| AdvertizementProtocolIE=0x6c,0x02,0x7F,0x00 |
| # octet 1: Element Id = 108 ( 0x6c) |
| # octer 2: Length of following fields |
| # octer 3: Bit7: PAME-BI ( Message Exchange BSSID independant) |
| # Bits0-6: Query response length limit. |
| # octer 4: Advertizement Protocol ID |
| QueryResponseLen={ |
| InfoId=0xDD,0xDD |
| ResponseLen={ |
| OUI=0x50,0x6F,0x9A |
| OUISubType=10 |
| ServiceUpdateIndicator=0 |
| VendorLen={ |
| ServiceProtocol=4 # 0: All service protocol types |
| # 1: Bonjour, 2: uPnP, 3: WS-Discovery |
| # 4: Wifi Display |
| # 255: Vendor specific |
| ServiceTransactionId=1 |
| ServiceStatus=0 # 0: Success |
| # 1: Service protocol type not available |
| # 2: Query data not available |
| # 3: Bad request. |
| ResponseData={ |
| } |
| } |
| } |
| } |
| } |
| |
| |
