examples/diffserv/afcbq

#!/usr/bin/perl
#
#
# AF using CBQ for a single interface eth0 
# 4 AF classes using GRED and one BE using RED
# Things you might want to change:
#	- the device bandwidth (set at 10Mbits)
#	- the bandwidth allocated for each AF class and the BE class	
#	- the drop probability associated with each AF virtual queue
#
# AF DSCP values used (based on AF draft 04)
# -----------------------------------------
# AF DSCP values
# AF1 1. 0x0a 2. 0x0c 3. 0x0e
# AF2 1. 0x12 2. 0x14 3. 0x16
# AF3 1. 0x1a 2. 0x1c 3. 0x1e
# AF4 1. 0x22 2. 0x24 3. 0x26

#
# 
# A simple DSCP-class relationship formula used to generate
# values in the for loop of this script; $drop stands for the
# DP
#	$dscp = ($class*8+$drop*2)
#
#  if you use GRIO buffer sharing, then GRED priority is set as follows:
#  $gprio=$drop+1; 
#

$TC = "/usr/src/iproute2-current/tc/tc";
$DEV = "dev lo";
$DEV = "dev eth1";
$DEV = "dev eth0";
# the BE-class number
$beclass = "5";  

#GRIO buffer sharing on or off?
$GRIO = "";
$GRIO = "grio";
# The bandwidth of your device
$linerate="10Mbit";
# The BE and AF rates
%rate_table=();
$berate="1500Kbit";
$rate_table{"AF1rate"}="1500Kbit";
$rate_table{"AF2rate"}="1500Kbit";
$rate_table{"AF3rate"}="1500Kbit";
$rate_table{"AF4rate"}="1500Kbit";
#
#
#
print "\n# --- General setup  ---\n";
print "$TC qdisc add $DEV handle 1:0 root dsmark indices 64 set_tc_index\n";
print "$TC filter add $DEV parent 1:0 protocol ip prio 1 tcindex mask 0xfc " .
   "shift 2 pass_on\n";
   #"shift 2\n";
print "$TC qdisc add $DEV parent 1:0 handle 2:0 cbq bandwidth $linerate ".
  "cell 8 avpkt 1000 mpu 64\n";
print "$TC filter add $DEV parent 2:0 protocol ip prio 1 tcindex ".
  "mask 0xf0 shift 4 pass_on\n";
for $class (1..4) {
    print "\n# --- AF Class $class specific setup---\n";
    $AFrate=sprintf("AF%drate",$class);
    print "$TC class add $DEV parent 2:0 classid 2:$class cbq ".
      "bandwidth $linerate rate $rate_table{$AFrate} avpkt 1000 prio ".
      (6-$class)." bounded allot 1514 weight 1 maxburst 21\n";
    print "$TC filter add $DEV parent 2:0 protocol ip prio 1 handle $class ".
      "tcindex classid 2:$class\n";
    print "$TC qdisc add $DEV parent 2:$class gred setup DPs 3 default 2 ".
      "$GRIO\n";
# 
# per DP setup
#
    for $drop (1..3) {
    print "\n# --- AF Class $class DP $drop---\n";
	$dscp = $class*8+$drop*2;
	$tcindex = sprintf("1%x%x",$class,$drop);
	print "$TC filter add $DEV parent 1:0 protocol ip prio 1 ".
	  "handle $dscp tcindex classid 1:$tcindex\n";
	$prob = $drop*0.02;
        if ($GRIO) {
	$gprio = $drop+1;
	print "$TC qdisc change $DEV parent 2:$class gred limit 60KB min 15KB ".
	  "max 45KB burst 20 avpkt 1000 bandwidth $linerate DP $drop ".
	  "probability $prob ".
          "prio $gprio\n";
        } else {
	print "$TC qdisc change $DEV parent 2:$class gred limit 60KB min 15KB ".
	  "max 45KB burst 20 avpkt 1000 bandwidth $linerate DP $drop ".
	  "probability $prob \n";
	}
    }
}
#
#
print "\n#------BE Queue setup------\n";
print "$TC filter add $DEV parent 1:0 protocol ip prio 2 ".
          "handle 0 tcindex mask 0 classid 1:1\n";
print "$TC class add $DEV parent 2:0 classid 2:$beclass cbq ".
      "bandwidth $linerate rate $berate avpkt 1000 prio 6 " .
      "bounded allot 1514 weight 1 maxburst 21 \n";
print "$TC filter add $DEV parent 2:0 protocol ip prio 1 handle 0 tcindex ".
  "classid 2:5\n";
print "$TC qdisc add $DEV parent 2:5 red limit 60KB min 15KB max 45KB ".
  "burst 20 avpkt 1000 bandwidth $linerate probability 0.4\n";