| # Makefile.in generated by automake 1.14 from Makefile.am. |
| # utils/Makefile. Generated from Makefile.in by configure. |
| |
| # Copyright (C) 1994-2013 Free Software Foundation, Inc. |
| |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| |
| |
| # This is _NOT_ the library release version, it's an API version. |
| # Please read Chapter 6 "Library interface versions" of the libtool |
| # documentation before making any modification |
| # |
| # http://sources.redhat.com/autobook/autobook/autobook_91.html |
| # |
| # The version scheme used by Libtool tracks interfaces, where an interface |
| # is the set of exported entry points into the library. All Libtool libraries |
| # start with `-version-info' set to `0:0:0' -- this will be the default |
| # version number if you don't explicitly set it on the Libtool link command |
| # line. The meaning of these numbers (from left to right) is as follows: |
| # |
| # current |
| # The number of the current interface exported by the library. A current |
| # value of `0', means that you are calling the interface exported by this |
| # library interface 0. |
| # |
| # revision |
| # The implementation number of the most recent interface exported by this |
| # library. In this case, a revision value of `0' means that this is the |
| # first implementation of the interface. |
| # |
| # If the next release of this library exports the same interface, but has |
| # a different implementation (perhaps some bugs have been fixed), the |
| # revision number will be higher, but current number will be the same. |
| # In that case, when given a choice, the library with the highest revision |
| # will always be used by the runtime loader. |
| # |
| # age |
| # The number of previous additional interfaces supported by this library. |
| # If age were `2', then this library can be linked into executables which |
| # were built with a release of this library that exported the current |
| # interface number, current, or any of the previous two interfaces. |
| # |
| # By definition age must be less than or equal to current. At the outset, |
| # only the first ever interface is implemented, so age can only be `0'. |
| # |
| # 1. If you have changed any of the sources for this library, the revision |
| # number must be incremented. |
| # This is a new revision of the current interface. |
| # |
| # 2. If the interface has changed, then current must be incremented, and |
| # revision reset to `0'. |
| # This is the first revision of a new interface. |
| # |
| # 3. If the new interface is a superset of the previous interface (that is, |
| # if the previous interface has not been broken by the changes in this |
| # new release), then age must be incremented. |
| # This release is backwards compatible with the previous release. |
| # |
| # 4. If the new interface has removed elements with respect to the previous |
| # interface, then you have broken backward compatibility and age must be |
| # reset to `0'. |
| # This release has a new, but backwards incompatible interface. |
| # |
| # For example, if the next release of the library included some new commands |
| # for an existing socket protocol, you would use -version-info 1:0:1. |
| # This is the first revision of a new interface. This release is backwards |
| # compatible with the previous release. |
| # |
| # Later, you implement a faster way of handling part of the algorithm at the |
| # core of the library, and release it with -version-info 1:1:1. This is a new |
| # revision of the current interface. |
| # |
| # Unfortunately the speed of your new implementation can only be fully |
| # exploited by changing the API to access the structures at a lower level, |
| # which breaks compatibility with the previous interface, so you release it |
| # as -version-info 2:0:0. This release has a new, but backwards incompatible |
| # interface. |
| |
| |
| am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' |
| am__make_running_with_option = \ |
| case $${target_option-} in \ |
| ?) ;; \ |
| *) echo "am__make_running_with_option: internal error: invalid" \ |
| "target option '$${target_option-}' specified" >&2; \ |
| exit 1;; \ |
| esac; \ |
| has_opt=no; \ |
| sane_makeflags=$$MAKEFLAGS; \ |
| if $(am__is_gnu_make); then \ |
| sane_makeflags=$$MFLAGS; \ |
| else \ |
| case $$MAKEFLAGS in \ |
| *\\[\ \ ]*) \ |
| bs=\\; \ |
| sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ |
| | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ |
| esac; \ |
| fi; \ |
| skip_next=no; \ |
| strip_trailopt () \ |
| { \ |
| flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ |
| }; \ |
| for flg in $$sane_makeflags; do \ |
| test $$skip_next = yes && { skip_next=no; continue; }; \ |
| case $$flg in \ |
| *=*|--*) continue;; \ |
| -*I) strip_trailopt 'I'; skip_next=yes;; \ |
| -*I?*) strip_trailopt 'I';; \ |
| -*O) strip_trailopt 'O'; skip_next=yes;; \ |
| -*O?*) strip_trailopt 'O';; \ |
| -*l) strip_trailopt 'l'; skip_next=yes;; \ |
| -*l?*) strip_trailopt 'l';; \ |
| -[dEDm]) skip_next=yes;; \ |
| -[JT]) skip_next=yes;; \ |
| esac; \ |
| case $$flg in \ |
| *$$target_option*) has_opt=yes; break;; \ |
| esac; \ |
| done; \ |
| test $$has_opt = yes |
| am__make_dryrun = (target_option=n; $(am__make_running_with_option)) |
| am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) |
| pkgdatadir = $(datadir)/ipset |
| pkgincludedir = $(includedir)/ipset |
| pkglibdir = $(libdir)/ipset |
| pkglibexecdir = $(libexecdir)/ipset |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = x86_64-unknown-linux-gnu |
| host_triplet = x86_64-unknown-linux-gnu |
| DIST_COMMON = $(top_srcdir)/Make_global.am $(srcdir)/Makefile.in \ |
| $(srcdir)/Makefile.am $(dist_bashcomp_DATA) |
| #am__append_1 = -g -g3 -ggdb -gdwarf-2 -DIPSET_DEBUG -Wall -Werror |
| am__append_2 = -O2 -DNDEBUG |
| subdir = utils |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/m4/argz.m4 \ |
| $(top_srcdir)/m4/ax_cflags_gcc_option.m4 \ |
| $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \ |
| $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ |
| $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = $(top_builddir)/config.h |
| CONFIG_CLEAN_FILES = |
| CONFIG_CLEAN_VPATH_FILES = |
| AM_V_P = $(am__v_P_$(V)) |
| am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY)) |
| am__v_P_0 = false |
| am__v_P_1 = : |
| AM_V_GEN = $(am__v_GEN_$(V)) |
| am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) |
| am__v_GEN_0 = @echo " GEN " $@; |
| am__v_GEN_1 = |
| AM_V_at = $(am__v_at_$(V)) |
| am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) |
| am__v_at_0 = @ |
| am__v_at_1 = |
| SOURCES = |
| DIST_SOURCES = |
| am__can_run_installinfo = \ |
| case $$AM_UPDATE_INFO_DIR in \ |
| n|no|NO) false;; \ |
| *) (install-info --version) >/dev/null 2>&1;; \ |
| esac |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| am__uninstall_files_from_dir = { \ |
| test -z "$$files" \ |
| || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
| || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
| $(am__cd) "$$dir" && rm -f $$files; }; \ |
| } |
| am__installdirs = "$(DESTDIR)$(bashcompdir)" |
| DATA = $(dist_bashcomp_DATA) |
| am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| ACLOCAL = ${SHELL} /usr/local/google/home/xdsun/work/eureka_0110/external/ipset/build-aux/missing aclocal-1.14 |
| AMTAR = $${TAR-tar} |
| AM_DEFAULT_VERBOSITY = 0 |
| AR = ar |
| ARGZ_H = |
| AUTOCONF = ${SHELL} /usr/local/google/home/xdsun/work/eureka_0110/external/ipset/build-aux/missing autoconf |
| AUTOHEADER = ${SHELL} /usr/local/google/home/xdsun/work/eureka_0110/external/ipset/build-aux/missing autoheader |
| AUTOMAKE = ${SHELL} /usr/local/google/home/xdsun/work/eureka_0110/external/ipset/build-aux/missing automake-1.14 |
| AWK = gawk |
| CC = gcc |
| CCDEPMODE = depmode=gcc3 |
| CFLAGS = -g -O2 |
| CPP = gcc -E |
| CPPFLAGS = |
| CYGPATH_W = echo |
| DEFS = -DHAVE_CONFIG_H |
| DEPDIR = .deps |
| DLLTOOL = false |
| DSYMUTIL = |
| DUMPBIN = |
| ECHO_C = |
| ECHO_N = -n |
| ECHO_T = |
| EGREP = /bin/grep -E |
| EXEEXT = |
| FGREP = /bin/grep -F |
| GREP = /bin/grep |
| HAVE_CHECKENTRY_BOOL = undef |
| HAVE_ETHER_ADDR_COPY = define |
| HAVE_ETHER_ADDR_EQUAL = define |
| HAVE_EXPORT_H = define |
| HAVE_EXPORT_SYMBOL_GPL_IN_MODULE_H = define |
| HAVE_IPV6_SKIP_EXTHDR_ARGS = 4 |
| HAVE_KVFREE = define |
| HAVE_LIST_LAST_ENTRY = define |
| HAVE_LIST_NEXT_ENTRY = define |
| HAVE_NETLINK_DUMP_START_ARGS = 4 |
| HAVE_NET_IN_NFNL_CALLBACK_FN = define |
| HAVE_NET_OPS_ID = undef |
| HAVE_NFNL_LOCK_SUBSYS = define |
| HAVE_NF_BRIDGE_GET_PHYSDEV = define |
| HAVE_NLA_PUT_BE16 = define |
| HAVE_NLA_PUT_BE64 = define |
| HAVE_NLA_PUT_IN_ADDR = define |
| HAVE_NL_INFO_PORTID = define |
| HAVE_NS_CAPABLE = define |
| HAVE_RBTREE_POSTORDER_FOR_EACH_ENTRY_SAFE = define |
| HAVE_STRUCT_XT_ACTION_PARAM = define |
| HAVE_TCF_EMATCH_OPS_CHANGE_ARG_NET = define |
| HAVE_TCF_EMATCH_STRUCT_NET = define |
| HAVE_USER_NS_IN_STRUCT_NET = undef |
| HAVE_VZALLOC = define |
| HAVE_XT_MTCHK_PARAM_STRUCT_NET = define |
| HAVE_XT_TARGET_PARAM = undef |
| INCLTDL = |
| INSTALL = /usr/bin/install -c |
| INSTALL_DATA = ${INSTALL} -m 644 |
| INSTALL_PROGRAM = ${INSTALL} |
| INSTALL_SCRIPT = ${INSTALL} |
| INSTALL_STRIP_PROGRAM = $(install_sh) -c -s |
| KBUILDDIR = |
| LD = /usr/bin/ld -m elf_x86_64 |
| LDFLAGS = |
| LIBADD_DL = -ldl |
| LIBADD_DLD_LINK = |
| LIBADD_DLOPEN = -ldl |
| LIBADD_SHL_LOAD = |
| LIBLTDL = -lltdl |
| LIBOBJS = |
| LIBS = -ldl |
| LIBTOOL = $(SHELL) $(top_builddir)/libtool |
| LIPO = |
| LN_S = ln -s |
| LTDLDEPS = |
| LTDLINCL = |
| LTDLOPEN = libltdl |
| LTLIBOBJS = |
| LT_CONFIG_H = config.h |
| LT_DLLOADERS = libltdl/dlopen.la |
| LT_DLPREOPEN = -dlpreopen libltdl/dlopen.la |
| MAKEINFO = ${SHELL} /usr/local/google/home/xdsun/work/eureka_0110/external/ipset/build-aux/missing makeinfo |
| MANIFEST_TOOL = : |
| MAXSETS = |
| MKDIR_P = /bin/mkdir -p |
| NM = /usr/bin/nm -B |
| NMEDIT = |
| OBJDUMP = objdump |
| OBJEXT = o |
| OTOOL = |
| OTOOL64 = |
| PACKAGE = ipset |
| PACKAGE_BUGREPORT = kadlec@blackhole.kfki.hu |
| PACKAGE_NAME = ipset |
| PACKAGE_STRING = ipset 6.29 |
| PACKAGE_TARNAME = ipset |
| PACKAGE_URL = |
| PACKAGE_VERSION = 6.29 |
| PATH_SEPARATOR = : |
| PKG_CONFIG = /usr/bin/pkg-config |
| PKG_CONFIG_LIBDIR = |
| PKG_CONFIG_PATH = |
| RANLIB = ranlib |
| SED = /bin/sed |
| SETTYPE_MODLIST = |
| SET_MAKE = |
| SHELL = /bin/sh |
| STRIP = strip |
| VERSION = 6.29 |
| abs_builddir = /usr/local/google/home/xdsun/work/eureka_0110/external/ipset/utils |
| abs_srcdir = /usr/local/google/home/xdsun/work/eureka_0110/external/ipset/utils |
| abs_top_builddir = /usr/local/google/home/xdsun/work/eureka_0110/external/ipset |
| abs_top_srcdir = /usr/local/google/home/xdsun/work/eureka_0110/external/ipset |
| ac_ct_AR = ar |
| ac_ct_CC = gcc |
| ac_ct_DUMPBIN = |
| am__include = include |
| am__leading_dot = . |
| am__quote = |
| am__tar = tar --format=posix -chf - "$$tardir" |
| am__untar = tar -xf - |
| bashcompdir = |
| bindir = ${exec_prefix}/bin |
| build = x86_64-unknown-linux-gnu |
| build_alias = |
| build_cpu = x86_64 |
| build_os = linux-gnu |
| build_vendor = unknown |
| builddir = . |
| datadir = ${datarootdir} |
| datarootdir = ${prefix}/share |
| docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} |
| dvidir = ${docdir} |
| exec_prefix = ${prefix} |
| host = x86_64-unknown-linux-gnu |
| host_alias = |
| host_cpu = x86_64 |
| host_os = linux-gnu |
| host_vendor = unknown |
| htmldir = ${docdir} |
| includedir = ${prefix}/include |
| infodir = ${datarootdir}/info |
| install_sh = ${SHELL} /usr/local/google/home/xdsun/work/eureka_0110/external/ipset/build-aux/install-sh |
| libdir = ${exec_prefix}/lib |
| libexecdir = ${exec_prefix}/libexec |
| libmnl_CFLAGS = |
| libmnl_LIBS = -lmnl |
| localedir = ${datarootdir}/locale |
| localstatedir = ${prefix}/var |
| ltdl_LIBOBJS = libltdl/lt__strl.o |
| ltdl_LTLIBOBJS = libltdl/lt__strl.lo |
| mandir = ${datarootdir}/man |
| mkdir_p = $(MKDIR_P) |
| oldincludedir = /usr/include |
| pdfdir = ${docdir} |
| prefix = /usr/local |
| program_transform_name = s,x,x, |
| psdir = ${docdir} |
| sbindir = ${exec_prefix}/sbin |
| sharedstatedir = ${prefix}/com |
| srcdir = . |
| sys_symbol_underscore = no |
| sysconfdir = ${prefix}/etc |
| target_alias = |
| top_build_prefix = ../ |
| top_builddir = .. |
| top_srcdir = .. |
| |
| # curr:rev:age |
| LIBVERSION = 9:0:6 |
| AM_CPPFLAGS = $(kinclude_CFLAGS) $(all_includes) -I$(top_srcdir)/include |
| AM_CFLAGS = -std=gnu99 $(am__append_1) $(am__append_2) |
| SPARSE = sparse |
| SPARSE_FLAGS = -Wsparse-all -I../include $(SPARSE_EXT_FLAGS) |
| IPSET_AM_V_CHECK = $(ipset_am__v_CHECK_$(V)) |
| ipset_am__v_CHECK_ = $(ipset_am__v_CHECK_$(AM_DEFAULT_VERBOSITY)) |
| ipset_am__v_CHECK_0 = @echo " CHECK " $<; |
| dist_bashcomp_DATA = ipset_bash_completion/ipset |
| all: all-am |
| |
| .SUFFIXES: |
| $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/Make_global.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ |
| && { if test -f $@; then exit 0; else break; fi; }; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign utils/Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign utils/Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| $(top_srcdir)/Make_global.am: |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(am__aclocal_m4_deps): |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| install-dist_bashcompDATA: $(dist_bashcomp_DATA) |
| @$(NORMAL_INSTALL) |
| @list='$(dist_bashcomp_DATA)'; test -n "$(bashcompdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(bashcompdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(bashcompdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(bashcompdir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(bashcompdir)" || exit $$?; \ |
| done |
| |
| uninstall-dist_bashcompDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_bashcomp_DATA)'; test -n "$(bashcompdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(bashcompdir)'; $(am__uninstall_files_from_dir) |
| tags TAGS: |
| |
| ctags CTAGS: |
| |
| cscope cscopelist: |
| |
| |
| distdir: $(DISTFILES) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| check-am: all-am |
| check: check-am |
| all-am: Makefile $(DATA) |
| installdirs: |
| for dir in "$(DESTDIR)$(bashcompdir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: install-am |
| install-exec: install-exec-am |
| install-data: install-data-am |
| uninstall: uninstall-am |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-am |
| install-strip: |
| if test -z '$(STRIP)'; then \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| install; \ |
| else \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| fi |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-am |
| |
| clean-am: clean-generic clean-libtool mostlyclean-am |
| |
| distclean: distclean-am |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic |
| |
| dvi: dvi-am |
| |
| dvi-am: |
| |
| html: html-am |
| |
| html-am: |
| |
| info: info-am |
| |
| info-am: |
| |
| install-data-am: install-dist_bashcompDATA |
| |
| install-dvi: install-dvi-am |
| |
| install-dvi-am: |
| |
| install-exec-am: |
| |
| install-html: install-html-am |
| |
| install-html-am: |
| |
| install-info: install-info-am |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-am |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-am |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-am |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-am |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-am |
| |
| pdf-am: |
| |
| ps: ps-am |
| |
| ps-am: |
| |
| uninstall-am: uninstall-dist_bashcompDATA |
| |
| .MAKE: install-am install-strip |
| |
| .PHONY: all all-am check check-am clean clean-generic clean-libtool \ |
| cscopelist-am ctags-am distclean distclean-generic \ |
| distclean-libtool distdir dvi dvi-am html html-am info info-am \ |
| install install-am install-data install-data-am \ |
| install-dist_bashcompDATA install-dvi install-dvi-am \ |
| install-exec install-exec-am install-html install-html-am \ |
| install-info install-info-am install-man install-pdf \ |
| install-pdf-am install-ps install-ps-am install-strip \ |
| installcheck installcheck-am installdirs maintainer-clean \ |
| maintainer-clean-generic mostlyclean mostlyclean-generic \ |
| mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ |
| uninstall-am uninstall-dist_bashcompDATA |
| |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |