| # Makefile.in generated by automake 1.14 from Makefile.am. | |
| # lib/Makefile. Generated from Makefile.in by configure. | |
| # Copyright (C) 1994-2013 Free Software Foundation, Inc. | |
| # This Makefile.in is free software; the Free Software Foundation | |
| # gives unlimited permission to copy and/or distribute it, | |
| # with or without modifications, as long as this notice is preserved. | |
| # This program is distributed in the hope that it will be useful, | |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without | |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A | |
| # PARTICULAR PURPOSE. | |
| # This is _NOT_ the library release version, it's an API version. | |
| # Please read Chapter 6 "Library interface versions" of the libtool | |
| # documentation before making any modification | |
| # | |
| # http://sources.redhat.com/autobook/autobook/autobook_91.html | |
| # | |
| # The version scheme used by Libtool tracks interfaces, where an interface | |
| # is the set of exported entry points into the library. All Libtool libraries | |
| # start with `-version-info' set to `0:0:0' -- this will be the default | |
| # version number if you don't explicitly set it on the Libtool link command | |
| # line. The meaning of these numbers (from left to right) is as follows: | |
| # | |
| # current | |
| # The number of the current interface exported by the library. A current | |
| # value of `0', means that you are calling the interface exported by this | |
| # library interface 0. | |
| # | |
| # revision | |
| # The implementation number of the most recent interface exported by this | |
| # library. In this case, a revision value of `0' means that this is the | |
| # first implementation of the interface. | |
| # | |
| # If the next release of this library exports the same interface, but has | |
| # a different implementation (perhaps some bugs have been fixed), the | |
| # revision number will be higher, but current number will be the same. | |
| # In that case, when given a choice, the library with the highest revision | |
| # will always be used by the runtime loader. | |
| # | |
| # age | |
| # The number of previous additional interfaces supported by this library. | |
| # If age were `2', then this library can be linked into executables which | |
| # were built with a release of this library that exported the current | |
| # interface number, current, or any of the previous two interfaces. | |
| # | |
| # By definition age must be less than or equal to current. At the outset, | |
| # only the first ever interface is implemented, so age can only be `0'. | |
| # | |
| # 1. If you have changed any of the sources for this library, the revision | |
| # number must be incremented. | |
| # This is a new revision of the current interface. | |
| # | |
| # 2. If the interface has changed, then current must be incremented, and | |
| # revision reset to `0'. | |
| # This is the first revision of a new interface. | |
| # | |
| # 3. If the new interface is a superset of the previous interface (that is, | |
| # if the previous interface has not been broken by the changes in this | |
| # new release), then age must be incremented. | |
| # This release is backwards compatible with the previous release. | |
| # | |
| # 4. If the new interface has removed elements with respect to the previous | |
| # interface, then you have broken backward compatibility and age must be | |
| # reset to `0'. | |
| # This release has a new, but backwards incompatible interface. | |
| # | |
| # For example, if the next release of the library included some new commands | |
| # for an existing socket protocol, you would use -version-info 1:0:1. | |
| # This is the first revision of a new interface. This release is backwards | |
| # compatible with the previous release. | |
| # | |
| # Later, you implement a faster way of handling part of the algorithm at the | |
| # core of the library, and release it with -version-info 1:1:1. This is a new | |
| # revision of the current interface. | |
| # | |
| # Unfortunately the speed of your new implementation can only be fully | |
| # exploited by changing the API to access the structures at a lower level, | |
| # which breaks compatibility with the previous interface, so you release it | |
| # as -version-info 2:0:0. This release has a new, but backwards incompatible | |
| # interface. | |
| am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' | |
| am__make_running_with_option = \ | |
| case $${target_option-} in \ | |
| ?) ;; \ | |
| *) echo "am__make_running_with_option: internal error: invalid" \ | |
| "target option '$${target_option-}' specified" >&2; \ | |
| exit 1;; \ | |
| esac; \ | |
| has_opt=no; \ | |
| sane_makeflags=$$MAKEFLAGS; \ | |
| if $(am__is_gnu_make); then \ | |
| sane_makeflags=$$MFLAGS; \ | |
| else \ | |
| case $$MAKEFLAGS in \ | |
| *\\[\ \ ]*) \ | |
| bs=\\; \ | |
| sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | |
| | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ | |
| esac; \ | |
| fi; \ | |
| skip_next=no; \ | |
| strip_trailopt () \ | |
| { \ | |
| flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ | |
| }; \ | |
| for flg in $$sane_makeflags; do \ | |
| test $$skip_next = yes && { skip_next=no; continue; }; \ | |
| case $$flg in \ | |
| *=*|--*) continue;; \ | |
| -*I) strip_trailopt 'I'; skip_next=yes;; \ | |
| -*I?*) strip_trailopt 'I';; \ | |
| -*O) strip_trailopt 'O'; skip_next=yes;; \ | |
| -*O?*) strip_trailopt 'O';; \ | |
| -*l) strip_trailopt 'l'; skip_next=yes;; \ | |
| -*l?*) strip_trailopt 'l';; \ | |
| -[dEDm]) skip_next=yes;; \ | |
| -[JT]) skip_next=yes;; \ | |
| esac; \ | |
| case $$flg in \ | |
| *$$target_option*) has_opt=yes; break;; \ | |
| esac; \ | |
| done; \ | |
| test $$has_opt = yes | |
| am__make_dryrun = (target_option=n; $(am__make_running_with_option)) | |
| am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) | |
| pkgdatadir = $(datadir)/ipset | |
| pkgincludedir = $(includedir)/ipset | |
| pkglibdir = $(libdir)/ipset | |
| pkglibexecdir = $(libexecdir)/ipset | |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd | |
| install_sh_DATA = $(install_sh) -c -m 644 | |
| install_sh_PROGRAM = $(install_sh) -c | |
| install_sh_SCRIPT = $(install_sh) -c | |
| INSTALL_HEADER = $(INSTALL_DATA) | |
| transform = $(program_transform_name) | |
| NORMAL_INSTALL = : | |
| PRE_INSTALL = : | |
| POST_INSTALL = : | |
| NORMAL_UNINSTALL = : | |
| PRE_UNINSTALL = : | |
| POST_UNINSTALL = : | |
| build_triplet = x86_64-unknown-linux-gnu | |
| host_triplet = x86_64-unknown-linux-gnu | |
| DIST_COMMON = $(top_srcdir)/Make_global.am \ | |
| $(top_srcdir)/lib/Make_extra.am $(srcdir)/Makefile.in \ | |
| $(srcdir)/Makefile.am $(srcdir)/libipset.pc.in \ | |
| $(top_srcdir)/build-aux/depcomp | |
| #am__append_1 = -g -g3 -ggdb -gdwarf-2 -DIPSET_DEBUG -Wall -Werror | |
| am__append_2 = -O2 -DNDEBUG | |
| #am__append_3 = -DENABLE_SETTYPE_MODULES \ | |
| # -DIPSET_MODSDIR="\"$(IPSET_MODSDIR)\"" | |
| subdir = lib | |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 | |
| am__aclocal_m4_deps = $(top_srcdir)/m4/argz.m4 \ | |
| $(top_srcdir)/m4/ax_cflags_gcc_option.m4 \ | |
| $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \ | |
| $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ | |
| $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ | |
| $(top_srcdir)/configure.ac | |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ | |
| $(ACLOCAL_M4) | |
| mkinstalldirs = $(install_sh) -d | |
| CONFIG_HEADER = $(top_builddir)/config.h | |
| CONFIG_CLEAN_FILES = libipset.pc | |
| CONFIG_CLEAN_VPATH_FILES = | |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; | |
| am__vpath_adj = case $$p in \ | |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ | |
| *) f=$$p;; \ | |
| esac; | |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; | |
| am__install_max = 40 | |
| am__nobase_strip_setup = \ | |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` | |
| am__nobase_strip = \ | |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" | |
| am__nobase_list = $(am__nobase_strip_setup); \ | |
| for p in $$list; do echo "$$p $$p"; done | \ | |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ | |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ | |
| if (++n[$$2] == $(am__install_max)) \ | |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ | |
| END { for (dir in files) print dir, files[dir] }' | |
| am__base_list = \ | |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ | |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | |
| am__uninstall_files_from_dir = { \ | |
| test -z "$$files" \ | |
| || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ | |
| || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ | |
| $(am__cd) "$$dir" && rm -f $$files; }; \ | |
| } | |
| am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" | |
| LTLIBRARIES = $(lib_LTLIBRARIES) | |
| am__DEPENDENCIES_1 = | |
| libipset_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \ | |
| $(IPSET_SETTYPE_STATIC_OBJECTS) $(am__DEPENDENCIES_1) | |
| am_libipset_la_OBJECTS = data.lo errcode.lo icmp.lo icmpv6.lo mnl.lo \ | |
| parse.lo print.lo session.lo types.lo ui.lo types_init.lo | |
| libipset_la_OBJECTS = $(am_libipset_la_OBJECTS) | |
| AM_V_lt = $(am__v_lt_$(V)) | |
| am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) | |
| am__v_lt_0 = --silent | |
| am__v_lt_1 = | |
| libipset_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ | |
| $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ | |
| $(libipset_la_LDFLAGS) $(LDFLAGS) -o $@ | |
| AM_V_P = $(am__v_P_$(V)) | |
| am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY)) | |
| am__v_P_0 = false | |
| am__v_P_1 = : | |
| AM_V_GEN = $(am__v_GEN_$(V)) | |
| am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) | |
| am__v_GEN_0 = @echo " GEN " $@; | |
| am__v_GEN_1 = | |
| AM_V_at = $(am__v_at_$(V)) | |
| am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) | |
| am__v_at_0 = @ | |
| am__v_at_1 = | |
| DEFAULT_INCLUDES = -I. -I$(top_builddir) | |
| depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp | |
| am__depfiles_maybe = depfiles | |
| am__mv = mv -f | |
| COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ | |
| $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) | |
| LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ | |
| $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ | |
| $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ | |
| $(AM_CFLAGS) $(CFLAGS) | |
| AM_V_CC = $(am__v_CC_$(V)) | |
| am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) | |
| am__v_CC_0 = @echo " CC " $@; | |
| am__v_CC_1 = | |
| CCLD = $(CC) | |
| LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ | |
| $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ | |
| $(AM_LDFLAGS) $(LDFLAGS) -o $@ | |
| AM_V_CCLD = $(am__v_CCLD_$(V)) | |
| am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) | |
| am__v_CCLD_0 = @echo " CCLD " $@; | |
| am__v_CCLD_1 = | |
| SOURCES = $(libipset_la_SOURCES) $(EXTRA_libipset_la_SOURCES) | |
| DIST_SOURCES = $(libipset_la_SOURCES) $(EXTRA_libipset_la_SOURCES) | |
| am__can_run_installinfo = \ | |
| case $$AM_UPDATE_INFO_DIR in \ | |
| n|no|NO) false;; \ | |
| *) (install-info --version) >/dev/null 2>&1;; \ | |
| esac | |
| DATA = $(pkgconfig_DATA) | |
| am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) | |
| # Read a list of newline-separated strings from the standard input, | |
| # and print each of them once, without duplicates. Input order is | |
| # *not* preserved. | |
| am__uniquify_input = $(AWK) '\ | |
| BEGIN { nonempty = 0; } \ | |
| { items[$$0] = 1; nonempty = 1; } \ | |
| END { if (nonempty) { for (i in items) print i; }; } \ | |
| ' | |
| # Make sure the list of sources is unique. This is necessary because, | |
| # e.g., the same source file might be shared among _SOURCES variables | |
| # for different programs/libraries. | |
| am__define_uniq_tagged_files = \ | |
| list='$(am__tagged_files)'; \ | |
| unique=`for i in $$list; do \ | |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ | |
| done | $(am__uniquify_input)` | |
| ETAGS = etags | |
| CTAGS = ctags | |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) | |
| ACLOCAL = ${SHELL} /usr/local/google/home/xdsun/work/eureka_0110/external/ipset/build-aux/missing aclocal-1.14 | |
| AMTAR = $${TAR-tar} | |
| AM_DEFAULT_VERBOSITY = 0 | |
| AR = ar | |
| ARGZ_H = | |
| AUTOCONF = ${SHELL} /usr/local/google/home/xdsun/work/eureka_0110/external/ipset/build-aux/missing autoconf | |
| AUTOHEADER = ${SHELL} /usr/local/google/home/xdsun/work/eureka_0110/external/ipset/build-aux/missing autoheader | |
| AUTOMAKE = ${SHELL} /usr/local/google/home/xdsun/work/eureka_0110/external/ipset/build-aux/missing automake-1.14 | |
| AWK = gawk | |
| CC = gcc | |
| CCDEPMODE = depmode=gcc3 | |
| CFLAGS = -g -O2 | |
| CPP = gcc -E | |
| CPPFLAGS = | |
| CYGPATH_W = echo | |
| DEFS = -DHAVE_CONFIG_H | |
| DEPDIR = .deps | |
| DLLTOOL = false | |
| DSYMUTIL = | |
| DUMPBIN = | |
| ECHO_C = | |
| ECHO_N = -n | |
| ECHO_T = | |
| EGREP = /bin/grep -E | |
| EXEEXT = | |
| FGREP = /bin/grep -F | |
| GREP = /bin/grep | |
| HAVE_CHECKENTRY_BOOL = undef | |
| HAVE_ETHER_ADDR_COPY = define | |
| HAVE_ETHER_ADDR_EQUAL = define | |
| HAVE_EXPORT_H = define | |
| HAVE_EXPORT_SYMBOL_GPL_IN_MODULE_H = define | |
| HAVE_IPV6_SKIP_EXTHDR_ARGS = 4 | |
| HAVE_KVFREE = define | |
| HAVE_LIST_LAST_ENTRY = define | |
| HAVE_LIST_NEXT_ENTRY = define | |
| HAVE_NETLINK_DUMP_START_ARGS = 4 | |
| HAVE_NET_IN_NFNL_CALLBACK_FN = define | |
| HAVE_NET_OPS_ID = undef | |
| HAVE_NFNL_LOCK_SUBSYS = define | |
| HAVE_NF_BRIDGE_GET_PHYSDEV = define | |
| HAVE_NLA_PUT_BE16 = define | |
| HAVE_NLA_PUT_BE64 = define | |
| HAVE_NLA_PUT_IN_ADDR = define | |
| HAVE_NL_INFO_PORTID = define | |
| HAVE_NS_CAPABLE = define | |
| HAVE_RBTREE_POSTORDER_FOR_EACH_ENTRY_SAFE = define | |
| HAVE_STRUCT_XT_ACTION_PARAM = define | |
| HAVE_TCF_EMATCH_OPS_CHANGE_ARG_NET = define | |
| HAVE_TCF_EMATCH_STRUCT_NET = define | |
| HAVE_USER_NS_IN_STRUCT_NET = undef | |
| HAVE_VZALLOC = define | |
| HAVE_XT_MTCHK_PARAM_STRUCT_NET = define | |
| HAVE_XT_TARGET_PARAM = undef | |
| INCLTDL = | |
| INSTALL = /usr/bin/install -c | |
| INSTALL_DATA = ${INSTALL} -m 644 | |
| INSTALL_PROGRAM = ${INSTALL} | |
| INSTALL_SCRIPT = ${INSTALL} | |
| INSTALL_STRIP_PROGRAM = $(install_sh) -c -s | |
| KBUILDDIR = | |
| LD = /usr/bin/ld -m elf_x86_64 | |
| LDFLAGS = | |
| LIBADD_DL = -ldl | |
| LIBADD_DLD_LINK = | |
| LIBADD_DLOPEN = -ldl | |
| LIBADD_SHL_LOAD = | |
| LIBLTDL = -lltdl | |
| LIBOBJS = | |
| LIBS = -ldl | |
| LIBTOOL = $(SHELL) $(top_builddir)/libtool | |
| LIPO = | |
| LN_S = ln -s | |
| LTDLDEPS = | |
| LTDLINCL = | |
| LTDLOPEN = libltdl | |
| LTLIBOBJS = | |
| LT_CONFIG_H = config.h | |
| LT_DLLOADERS = libltdl/dlopen.la | |
| LT_DLPREOPEN = -dlpreopen libltdl/dlopen.la | |
| MAKEINFO = ${SHELL} /usr/local/google/home/xdsun/work/eureka_0110/external/ipset/build-aux/missing makeinfo | |
| MANIFEST_TOOL = : | |
| MAXSETS = | |
| MKDIR_P = /bin/mkdir -p | |
| NM = /usr/bin/nm -B | |
| NMEDIT = | |
| OBJDUMP = objdump | |
| OBJEXT = o | |
| OTOOL = | |
| OTOOL64 = | |
| PACKAGE = ipset | |
| PACKAGE_BUGREPORT = kadlec@blackhole.kfki.hu | |
| PACKAGE_NAME = ipset | |
| PACKAGE_STRING = ipset 6.29 | |
| PACKAGE_TARNAME = ipset | |
| PACKAGE_URL = | |
| PACKAGE_VERSION = 6.29 | |
| PATH_SEPARATOR = : | |
| PKG_CONFIG = /usr/bin/pkg-config | |
| PKG_CONFIG_LIBDIR = | |
| PKG_CONFIG_PATH = | |
| RANLIB = ranlib | |
| SED = /bin/sed | |
| SETTYPE_MODLIST = | |
| SET_MAKE = | |
| SHELL = /bin/sh | |
| STRIP = strip | |
| VERSION = 6.29 | |
| abs_builddir = /usr/local/google/home/xdsun/work/eureka_0110/external/ipset/lib | |
| abs_srcdir = /usr/local/google/home/xdsun/work/eureka_0110/external/ipset/lib | |
| abs_top_builddir = /usr/local/google/home/xdsun/work/eureka_0110/external/ipset | |
| abs_top_srcdir = /usr/local/google/home/xdsun/work/eureka_0110/external/ipset | |
| ac_ct_AR = ar | |
| ac_ct_CC = gcc | |
| ac_ct_DUMPBIN = | |
| am__include = include | |
| am__leading_dot = . | |
| am__quote = | |
| am__tar = tar --format=posix -chf - "$$tardir" | |
| am__untar = tar -xf - | |
| bashcompdir = | |
| bindir = ${exec_prefix}/bin | |
| build = x86_64-unknown-linux-gnu | |
| build_alias = | |
| build_cpu = x86_64 | |
| build_os = linux-gnu | |
| build_vendor = unknown | |
| builddir = . | |
| datadir = ${datarootdir} | |
| datarootdir = ${prefix}/share | |
| docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} | |
| dvidir = ${docdir} | |
| exec_prefix = ${prefix} | |
| host = x86_64-unknown-linux-gnu | |
| host_alias = | |
| host_cpu = x86_64 | |
| host_os = linux-gnu | |
| host_vendor = unknown | |
| htmldir = ${docdir} | |
| includedir = ${prefix}/include | |
| infodir = ${datarootdir}/info | |
| install_sh = ${SHELL} /usr/local/google/home/xdsun/work/eureka_0110/external/ipset/build-aux/install-sh | |
| libdir = ${exec_prefix}/lib | |
| libexecdir = ${exec_prefix}/libexec | |
| libmnl_CFLAGS = | |
| libmnl_LIBS = -lmnl | |
| localedir = ${datarootdir}/locale | |
| localstatedir = ${prefix}/var | |
| ltdl_LIBOBJS = libltdl/lt__strl.o | |
| ltdl_LTLIBOBJS = libltdl/lt__strl.lo | |
| mandir = ${datarootdir}/man | |
| mkdir_p = $(MKDIR_P) | |
| oldincludedir = /usr/include | |
| pdfdir = ${docdir} | |
| prefix = /usr/local | |
| program_transform_name = s,x,x, | |
| psdir = ${docdir} | |
| sbindir = ${exec_prefix}/sbin | |
| sharedstatedir = ${prefix}/com | |
| srcdir = . | |
| sys_symbol_underscore = no | |
| sysconfdir = ${prefix}/etc | |
| target_alias = | |
| top_build_prefix = ../ | |
| top_builddir = .. | |
| top_srcdir = .. | |
| # curr:rev:age | |
| LIBVERSION = 9:0:6 | |
| AM_CPPFLAGS = $(kinclude_CFLAGS) $(all_includes) -I$(top_srcdir)/include | |
| AM_CFLAGS = -std=gnu99 $(am__append_1) $(am__append_2) \ | |
| ${libmnl_CFLAGS} $(am__append_3) | |
| SPARSE = sparse | |
| SPARSE_FLAGS = -Wsparse-all -I../include $(SPARSE_EXT_FLAGS) | |
| IPSET_AM_V_CHECK = $(ipset_am__v_CHECK_$(V)) | |
| ipset_am__v_CHECK_ = $(ipset_am__v_CHECK_$(AM_DEFAULT_VERBOSITY)) | |
| ipset_am__v_CHECK_0 = @echo " CHECK " $<; | |
| IPSET_SETTYPE_LIST = \ | |
| ipset_bitmap_ip.c \ | |
| ipset_bitmap_ipmac.c \ | |
| ipset_bitmap_port.c \ | |
| ipset_hash_ip.c \ | |
| ipset_hash_ipport.c \ | |
| ipset_hash_ipmark.c \ | |
| ipset_hash_ipportip.c \ | |
| ipset_hash_ipportnet.c \ | |
| ipset_hash_net.c \ | |
| ipset_hash_netnet.c \ | |
| ipset_hash_netportnet.c \ | |
| ipset_hash_netport.c \ | |
| ipset_hash_netiface.c \ | |
| ipset_hash_mac.c \ | |
| ipset_list_set.c | |
| lib_LTLIBRARIES = libipset.la | |
| IPSET_MODSDIR = ${libdir}/ipset | |
| #IPSET_SETTYPE_MODULES = yes | |
| IPSET_SETTYPE_DYN = | |
| #IPSET_SETTYPE_DYN = $(if $(findstring all,$(SETTYPE_MODLIST)), \ | |
| # $(IPSET_SETTYPE_LIST), $(SETTYPE_MODLIST)) | |
| IPSET_SETTYPE_STATIC = $(filter-out $(IPSET_SETTYPE_DYN), \ | |
| $(IPSET_SETTYPE_LIST)) | |
| IPSET_SETTYPE_DYNAMIC = $(filter $(IPSET_SETTYPE_LIST), \ | |
| $(IPSET_SETTYPE_DYN)) | |
| IPSET_SETTYPE_STATIC_OBJECTS = $(patsubst %.c, %.lo, $(IPSET_SETTYPE_STATIC)) | |
| IPSET_SETTYPE_DYNAMIC_OBJECTS = $(patsubst %.c, %.lo, $(IPSET_SETTYPE_DYNAMIC)) | |
| IPSET_SETTYPE_DYNAMIC_MODULES = $(patsubst %.c, %.la, $(IPSET_SETTYPE_DYNAMIC)) | |
| IPSET_SETTYPE_DYNAMIC_LTFLAGS = -shared -module -avoid-version | |
| IPSET_SETTYPE_ALL_MODULES = $(patsubst %.c, %.la, $(IPSET_SETTYPE_STATIC)) \ | |
| $(IPSET_SETTYPE_DYNAMIC_MODULES) | |
| BUILT_SOURCES = ipset_settype_check types_init.c ipset_settype_modules | |
| CLEANFILES = ipset_settype_check types_init.c $(IPSET_SETTYPE_ALL_MODULES) | |
| libipset_la_LDFLAGS = -Wl,--version-script=$(top_srcdir)/lib/libipset.map -version-info $(LIBVERSION) | |
| libipset_la_LIBADD = ${libmnl_LIBS} $(IPSET_SETTYPE_STATIC_OBJECTS) $(LIBADD_DLOPEN) | |
| libipset_la_SOURCES = \ | |
| data.c \ | |
| errcode.c \ | |
| icmp.c \ | |
| icmpv6.c \ | |
| mnl.c \ | |
| parse.c \ | |
| print.c \ | |
| session.c \ | |
| types.c \ | |
| ui.c \ | |
| types_init.c | |
| EXTRA_libipset_la_SOURCES = \ | |
| debug.c | |
| EXTRA_DIST = $(IPSET_SETTYPE_LIST) libipset.map | |
| pkgconfigdir = $(libdir)/pkgconfig | |
| pkgconfig_DATA = libipset.pc | |
| all: $(BUILT_SOURCES) | |
| $(MAKE) $(AM_MAKEFLAGS) all-am | |
| .SUFFIXES: | |
| .SUFFIXES: .c .lo .o .obj | |
| $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/Make_global.am $(top_srcdir)/lib/Make_extra.am $(am__configure_deps) | |
| @for dep in $?; do \ | |
| case '$(am__configure_deps)' in \ | |
| *$$dep*) \ | |
| ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ | |
| && { if test -f $@; then exit 0; else break; fi; }; \ | |
| exit 1;; \ | |
| esac; \ | |
| done; \ | |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lib/Makefile'; \ | |
| $(am__cd) $(top_srcdir) && \ | |
| $(AUTOMAKE) --foreign lib/Makefile | |
| .PRECIOUS: Makefile | |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status | |
| @case '$?' in \ | |
| *config.status*) \ | |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ | |
| *) \ | |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ | |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ | |
| esac; | |
| $(top_srcdir)/Make_global.am $(top_srcdir)/lib/Make_extra.am: | |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) | |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh | |
| $(top_srcdir)/configure: $(am__configure_deps) | |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh | |
| $(ACLOCAL_M4): $(am__aclocal_m4_deps) | |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh | |
| $(am__aclocal_m4_deps): | |
| libipset.pc: $(top_builddir)/config.status $(srcdir)/libipset.pc.in | |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ | |
| install-libLTLIBRARIES: $(lib_LTLIBRARIES) | |
| @$(NORMAL_INSTALL) | |
| @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ | |
| list2=; for p in $$list; do \ | |
| if test -f $$p; then \ | |
| list2="$$list2 $$p"; \ | |
| else :; fi; \ | |
| done; \ | |
| test -z "$$list2" || { \ | |
| echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ | |
| $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ | |
| echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ | |
| $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ | |
| } | |
| uninstall-libLTLIBRARIES: | |
| @$(NORMAL_UNINSTALL) | |
| @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ | |
| for p in $$list; do \ | |
| $(am__strip_dir) \ | |
| echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ | |
| $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ | |
| done | |
| clean-libLTLIBRARIES: | |
| -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) | |
| @list='$(lib_LTLIBRARIES)'; \ | |
| locs=`for p in $$list; do echo $$p; done | \ | |
| sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ | |
| sort -u`; \ | |
| test -z "$$locs" || { \ | |
| echo rm -f $${locs}; \ | |
| rm -f $${locs}; \ | |
| } | |
| libipset.la: $(libipset_la_OBJECTS) $(libipset_la_DEPENDENCIES) $(EXTRA_libipset_la_DEPENDENCIES) | |
| $(AM_V_CCLD)$(libipset_la_LINK) -rpath $(libdir) $(libipset_la_OBJECTS) $(libipset_la_LIBADD) $(LIBS) | |
| mostlyclean-compile: | |
| -rm -f *.$(OBJEXT) | |
| distclean-compile: | |
| -rm -f *.tab.c | |
| include ./$(DEPDIR)/data.Plo | |
| include ./$(DEPDIR)/debug.Plo | |
| include ./$(DEPDIR)/errcode.Plo | |
| include ./$(DEPDIR)/icmp.Plo | |
| include ./$(DEPDIR)/icmpv6.Plo | |
| include ./$(DEPDIR)/mnl.Plo | |
| include ./$(DEPDIR)/parse.Plo | |
| include ./$(DEPDIR)/print.Plo | |
| include ./$(DEPDIR)/session.Plo | |
| include ./$(DEPDIR)/types.Plo | |
| include ./$(DEPDIR)/types_init.Plo | |
| include ./$(DEPDIR)/ui.Plo | |
| .c.o: | |
| $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ | |
| $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ | |
| $(am__mv) $$depbase.Tpo $$depbase.Po | |
| # $(AM_V_CC)source='$<' object='$@' libtool=no \ | |
| # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ | |
| # $(AM_V_CC_no)$(COMPILE) -c -o $@ $< | |
| .c.obj: | |
| $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ | |
| $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ | |
| $(am__mv) $$depbase.Tpo $$depbase.Po | |
| # $(AM_V_CC)source='$<' object='$@' libtool=no \ | |
| # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ | |
| # $(AM_V_CC_no)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` | |
| .c.lo: | |
| $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ | |
| $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ | |
| $(am__mv) $$depbase.Tpo $$depbase.Plo | |
| # $(AM_V_CC)source='$<' object='$@' libtool=yes \ | |
| # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ | |
| # $(AM_V_CC_no)$(LTCOMPILE) -c -o $@ $< | |
| mostlyclean-libtool: | |
| -rm -f *.lo | |
| clean-libtool: | |
| -rm -rf .libs _libs | |
| install-pkgconfigDATA: $(pkgconfig_DATA) | |
| @$(NORMAL_INSTALL) | |
| @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ | |
| if test -n "$$list"; then \ | |
| echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ | |
| $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ | |
| fi; \ | |
| for p in $$list; do \ | |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ | |
| echo "$$d$$p"; \ | |
| done | $(am__base_list) | \ | |
| while read files; do \ | |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ | |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ | |
| done | |
| uninstall-pkgconfigDATA: | |
| @$(NORMAL_UNINSTALL) | |
| @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ | |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ | |
| dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) | |
| ID: $(am__tagged_files) | |
| $(am__define_uniq_tagged_files); mkid -fID $$unique | |
| tags: tags-am | |
| TAGS: tags | |
| tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) | |
| set x; \ | |
| here=`pwd`; \ | |
| $(am__define_uniq_tagged_files); \ | |
| shift; \ | |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ | |
| test -n "$$unique" || unique=$$empty_fix; \ | |
| if test $$# -gt 0; then \ | |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ | |
| "$$@" $$unique; \ | |
| else \ | |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ | |
| $$unique; \ | |
| fi; \ | |
| fi | |
| ctags: ctags-am | |
| CTAGS: ctags | |
| ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) | |
| $(am__define_uniq_tagged_files); \ | |
| test -z "$(CTAGS_ARGS)$$unique" \ | |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ | |
| $$unique | |
| GTAGS: | |
| here=`$(am__cd) $(top_builddir) && pwd` \ | |
| && $(am__cd) $(top_srcdir) \ | |
| && gtags -i $(GTAGS_ARGS) "$$here" | |
| cscopelist: cscopelist-am | |
| cscopelist-am: $(am__tagged_files) | |
| list='$(am__tagged_files)'; \ | |
| case "$(srcdir)" in \ | |
| [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ | |
| *) sdir=$(subdir)/$(srcdir) ;; \ | |
| esac; \ | |
| for i in $$list; do \ | |
| if test -f "$$i"; then \ | |
| echo "$(subdir)/$$i"; \ | |
| else \ | |
| echo "$$sdir/$$i"; \ | |
| fi; \ | |
| done >> $(top_builddir)/cscope.files | |
| distclean-tags: | |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags | |
| distdir: $(DISTFILES) | |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ | |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ | |
| list='$(DISTFILES)'; \ | |
| dist_files=`for file in $$list; do echo $$file; done | \ | |
| sed -e "s|^$$srcdirstrip/||;t" \ | |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ | |
| case $$dist_files in \ | |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ | |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ | |
| sort -u` ;; \ | |
| esac; \ | |
| for file in $$dist_files; do \ | |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ | |
| if test -d $$d/$$file; then \ | |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ | |
| if test -d "$(distdir)/$$file"; then \ | |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ | |
| fi; \ | |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ | |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ | |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ | |
| fi; \ | |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ | |
| else \ | |
| test -f "$(distdir)/$$file" \ | |
| || cp -p $$d/$$file "$(distdir)/$$file" \ | |
| || exit 1; \ | |
| fi; \ | |
| done | |
| check-am: all-am | |
| check: $(BUILT_SOURCES) | |
| $(MAKE) $(AM_MAKEFLAGS) check-am | |
| all-am: Makefile $(LTLIBRARIES) $(DATA) | |
| installdirs: | |
| for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)"; do \ | |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ | |
| done | |
| install: $(BUILT_SOURCES) | |
| $(MAKE) $(AM_MAKEFLAGS) install-am | |
| install-exec: install-exec-am | |
| install-data: install-data-am | |
| uninstall: uninstall-am | |
| install-am: all-am | |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am | |
| installcheck: installcheck-am | |
| install-strip: | |
| if test -z '$(STRIP)'; then \ | |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ | |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ | |
| install; \ | |
| else \ | |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ | |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ | |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ | |
| fi | |
| mostlyclean-generic: | |
| clean-generic: | |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) | |
| distclean-generic: | |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) | |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) | |
| maintainer-clean-generic: | |
| @echo "This command is intended for maintainers to use" | |
| @echo "it deletes files that may require special tools to rebuild." | |
| -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) | |
| clean: clean-am | |
| clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ | |
| mostlyclean-am | |
| distclean: distclean-am | |
| -rm -rf ./$(DEPDIR) | |
| -rm -f Makefile | |
| distclean-am: clean-am distclean-compile distclean-generic \ | |
| distclean-tags | |
| dvi: dvi-am | |
| dvi-am: | |
| html: html-am | |
| html-am: | |
| info: info-am | |
| info-am: | |
| install-data-am: install-data-local install-pkgconfigDATA | |
| install-dvi: install-dvi-am | |
| install-dvi-am: | |
| install-exec-am: install-libLTLIBRARIES | |
| install-html: install-html-am | |
| install-html-am: | |
| install-info: install-info-am | |
| install-info-am: | |
| install-man: | |
| install-pdf: install-pdf-am | |
| install-pdf-am: | |
| install-ps: install-ps-am | |
| install-ps-am: | |
| installcheck-am: | |
| maintainer-clean: maintainer-clean-am | |
| -rm -rf ./$(DEPDIR) | |
| -rm -f Makefile | |
| maintainer-clean-am: distclean-am maintainer-clean-generic | |
| mostlyclean: mostlyclean-am | |
| mostlyclean-am: mostlyclean-compile mostlyclean-generic \ | |
| mostlyclean-libtool | |
| pdf: pdf-am | |
| pdf-am: | |
| ps: ps-am | |
| ps-am: | |
| uninstall-am: uninstall-libLTLIBRARIES uninstall-local \ | |
| uninstall-pkgconfigDATA | |
| .MAKE: all check install install-am install-strip | |
| .PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ | |
| clean-libLTLIBRARIES clean-libtool cscopelist-am ctags \ | |
| ctags-am distclean distclean-compile distclean-generic \ | |
| distclean-libtool distclean-tags distdir dvi dvi-am html \ | |
| html-am info info-am install install-am install-data \ | |
| install-data-am install-data-local install-dvi install-dvi-am \ | |
| install-exec install-exec-am install-html install-html-am \ | |
| install-info install-info-am install-libLTLIBRARIES \ | |
| install-man install-pdf install-pdf-am install-pkgconfigDATA \ | |
| install-ps install-ps-am install-strip installcheck \ | |
| installcheck-am installdirs maintainer-clean \ | |
| maintainer-clean-generic mostlyclean mostlyclean-compile \ | |
| mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ | |
| tags tags-am uninstall uninstall-am uninstall-libLTLIBRARIES \ | |
| uninstall-local uninstall-pkgconfigDATA | |
| ipset_%.lo: ipset_%.c | |
| $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`; \ | |
| $(LTCOMPILE) -D_INIT=ipset_$*_init \ | |
| $(if $(findstring ipset_$*.c,$(IPSET_SETTYPE_STATIC)), -DTYPE_INCLUSIVE,)\ | |
| -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< && \ | |
| $(am__mv) $$depbase.Tpo $$depbase.Plo | |
| # $(AM_V_CC)source='$<' object='$@' libtool=yes \ | |
| # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ | |
| # $(LTCOMPILE) -D_INIT=ipset_$*_init \ | |
| $(if $(findstring ipset_$*.c,$(IPSET_SETTYPE_STATIC)), -DTYPE_INCLUSIVE,)\ | |
| -c -o $@ $< | |
| ipset_%.la: $(lib_LTLIBRARIES) ipset_%.lo | |
| $(AM_V_CCLD)lobj="$(patsubst %.la, %.lo, $@)"; \ | |
| $(LIBTOOL) --silent --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ | |
| $(CFLAGS) $(IPSET_SETTYPE_DYNAMIC_LTFLAGS) $(LDFLAGS) -o $@ \ | |
| -rpath $(IPSET_MODSDIR) $$lobj $(LIBS) $(top_builddir)/lib/libipset.la | |
| types_init.c: $(IPSET_SETTYPE_STATIC_OBJECTS) | |
| $(AM_V_GEN)static_list=`echo $(patsubst %.c,%,$(IPSET_SETTYPE_STATIC))`; \ | |
| echo -n "" > $@; \ | |
| for i in $$static_list; do \ | |
| echo "extern void $${i}_init(void);" >> $@; \ | |
| done; \ | |
| echo "void ipset_types_init(void);" >> $@; \ | |
| echo "void ipset_types_init(void)" >> $@; \ | |
| echo "{" >> $@; \ | |
| for i in $$static_list; do \ | |
| echo " ""$${i}_init();" >> $@; \ | |
| done; \ | |
| echo "}" >> $@; | |
| ipset_settype_check: | |
| @list="$(IPSET_SETTYPE_MODULES) $(IPSET_SETTYPE_STATIC_OBJECTS)"; \ | |
| test -f $@ || echo "$$list" > $@; \ | |
| if test "$$list" != "`cat $@`"; then \ | |
| $(MAKE) clean; \ | |
| echo "$$list" > $@; \ | |
| fi | |
| ipset_settype_modules: $(lib_LTLIBRARIES) $(IPSET_SETTYPE_DYNAMIC_OBJECTS) \ | |
| $(IPSET_SETTYPE_DYNAMIC_MODULES) | |
| install-data-local: install-settype-modules | |
| uninstall-local: uninstall-settype-modules | |
| install-settype-modules: ipset_settype_modules | |
| @$(NORMAL_INSTALL) | |
| @list='$(IPSET_SETTYPE_DYNAMIC_MODULES)'; \ | |
| test -n "$(IPSET_MODSDIR)" || list=; \ | |
| list2=; for p in $$list; do \ | |
| if test -f $$p; then \ | |
| list2="$$list2 $$p"; \ | |
| else :; fi; \ | |
| done; \ | |
| test -z "$$list2" || { \ | |
| echo " $(MKDIR_P) '$(DESTDIR)$(IPSET_MODSDIR)'"; \ | |
| $(MKDIR_P) "$(DESTDIR)$(IPSET_MODSDIR)" || exit 1; \ | |
| echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(IPSET_MODSDIR)'"; \ | |
| $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(IPSET_MODSDIR)"; \ | |
| } | |
| uninstall-settype-modules: | |
| @$(NORMAL_UNINSTALL) | |
| @list='$(IPSET_SETTYPE_DYNAMIC_MODULES)'; \ | |
| test -n "$(IPSET_MODSDIR)" || list=; \ | |
| for p in $$list; do \ | |
| $(am__strip_dir) \ | |
| echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(IPSET_MODSDIR)/$$f'"; \ | |
| $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(IPSET_MODSDIR)/$$f"; \ | |
| done | |
| .PHONY: ipset_settype_check ipset_settype_modules ipset_settype_modules-stamp \ | |
| install-settype-modules uninstall-settype-modules | |
| sparse-check: $(libipset_la_SOURCES:.c=.d) | |
| %.d: %.c | |
| $(IPSET_AM_V_CHECK)\ | |
| $(SPARSE) $(SPARSE_FLAGS) $(AM_CFLAGS) $(AM_CPPFLAGS) $< || : | |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. | |
| # Otherwise a system limit (for SysV at least) may be exceeded. | |
| .NOEXPORT: |