blob: 702bf95408a1ad4b18e3058beabf934187a51d2b [file] [log] [blame] [edit]
.\"
.\" (C) Copyright 2016-2017, Arturo Borrero Gonzalez <arturo@netfilter.org>
.\"
.\" %%%LICENSE_START(GPLv2+_DOC_FULL)
.\" This is free documentation; you can redistribute it and/or
.\" modify it under the terms of the GNU General Public License as
.\" published by the Free Software Foundation; either version 2 of
.\" the License, or (at your option) any later version.
.\"
.\" The GNU General Public License's references to "object code"
.\" and "executables" are to be interpreted as the output of any
.\" document formatting or typesetting system, including
.\" intermediate and printed output.
.\"
.\" This manual is distributed in the hope that it will be useful,
.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
.\" GNU General Public License for more details.
.\"
.\" You should have received a copy of the GNU General Public
.\" License along with this manual; if not, see
.\" <http://www.gnu.org/licenses/>.
.\" %%%LICENSE_END
.\"
.TH XTABLES-NFT 8 "June 2018"
.SH NAME
xtables-nft \(em iptables using nftables kernel api
.SH DESCRIPTION
\fBxtables-nft\fP are versions of iptables that use the nftables API.
This is a set of tools to help the system administrator migrate the
ruleset from \fBiptables(8)\fP, \fBip6tables(8)\fP, \fBarptables(8)\fP, and
\fBebtables(8)\fP to \fBnftables(8)\fP.
The \fBxtables-nft\fP set is composed of several commands:
.IP \[bu] 2
iptables\-nft
.IP \[bu]
iptables\-nft\-save
.IP \[bu]
iptables\-nft\-restore
.IP \[bu]
ip6tables\-nft
.IP \[bu]
ip6tables\-nft\-save
.IP \[bu]
ip6tables\-nft\-restore
.IP \[bu]
arptables\-nft
.IP \[bu]
ebtables\-nft
These tools use the libxtables framework extensions and hook to the nf_tables
kernel subsystem using the \fBnft_compat\fP module.
.SH USAGE
The xtables-nft tools allow you to manage the nf_tables backend using the
native syntax of \fBiptables(8)\fP, \fBip6tables(8)\fP, \fBarptables(8)\fP, and
\fBebtables(8)\fP.
You should use the xtables-nft tools exactly the same way as you would use the
corresponding original tools.
Adding a rule will result in that rule being added to the nf_tables kernel
subsystem instead.
Listing the ruleset will use the nf_tables backend as well.
When these tools were designed, the main idea was to replace each legacy binary
with a symlink to the xtables-nft program, for example:
.nf
/sbin/iptables -> /usr/sbin/iptables\-nft\-multi
/sbin/ip6tables -> /usr/sbin/ip6tables\-nft\-multi
/sbin/arptables -> /usr/sbin/arptables\-nft\-multi
/sbin/ebtables -> /usr/sbin/ebtables\-nft\-multi
.fi
The iptables version string will indicate whether the legacy API (get/setsockopt) or
the new nf_tables api is used:
.nf
iptables \-V
iptables v1.7 (nf_tables)
.fi
.SH DIFFERENCES TO LEGACY IPTABLES
Because the xtables-nft tools use the nf_tables kernel API, rule additions
and deletions are always atomic. Unlike iptables-legacy, iptables-nft \-A ..
will NOT need to retrieve the current ruleset from the kernel, change it, and
re-load the altered ruleset. Instead, iptables-nft will tell the kernel to add
one rule. For this reason, the iptables-legacy \-\-wait option is a no-op in
iptables-nft.
Use of the xtables-nft tools allow monitoring ruleset changes using the
.B xtables\-monitor(8)
command.
When using \-j TRACE to debug packet traversal to the ruleset, note that you will need to use
.B xtables\-monitor(8)
in \-\-trace mode to obtain monitoring trace events.
.SH EXAMPLES
One basic example is creating the skeleton ruleset in nf_tables from the
xtables-nft tools, in a fresh machine:
.nf
root@machine:~# iptables\-nft \-L
[...]
root@machine:~# ip6tables\-nft \-L
[...]
root@machine:~# arptables\-nft \-L
[...]
root@machine:~# ebtables\-nft \-L
[...]
root@machine:~# nft list ruleset
table ip filter {
chain INPUT {
type filter hook input priority 0; policy accept;
}
chain FORWARD {
type filter hook forward priority 0; policy accept;
}
chain OUTPUT {
type filter hook output priority 0; policy accept;
}
}
table ip6 filter {
chain INPUT {
type filter hook input priority 0; policy accept;
}
chain FORWARD {
type filter hook forward priority 0; policy accept;
}
chain OUTPUT {
type filter hook output priority 0; policy accept;
}
}
table bridge filter {
chain INPUT {
type filter hook input priority \-200; policy accept;
}
chain FORWARD {
type filter hook forward priority \-200; policy accept;
}
chain OUTPUT {
type filter hook output priority \-200; policy accept;
}
}
table arp filter {
chain INPUT {
type filter hook input priority 0; policy accept;
}
chain FORWARD {
type filter hook forward priority 0; policy accept;
}
chain OUTPUT {
type filter hook output priority 0; policy accept;
}
}
.fi
(please note that in fresh machines, listing the ruleset for the first time
results in all tables an chain being created).
To migrate your complete filter ruleset, in the case of \fBiptables(8)\fP,
you would use:
.nf
root@machine:~# iptables\-legacy\-save > myruleset # reads from x_tables
root@machine:~# iptables\-nft\-restore myruleset # writes to nf_tables
.fi
or
.nf
root@machine:~# iptables\-legacy\-save | iptables-translate-restore | less
.fi
to see how rules would look like in the nft
\fBnft(8)\fP
syntax.
.SH LIMITATIONS
You should use \fBLinux kernel >= 4.17\fP.
The CLUSTERIP target is not supported.
To get up-to-date information about this, please head to
\fBhttp://wiki.nftables.org/\fP.
.SH SEE ALSO
\fBnft(8)\fP, \fBxtables\-translate(8)\fP, \fBxtables\-monitor(8)\fP
.SH AUTHORS
The nftables framework is written by the Netfilter project
(https://www.netfilter.org).
This manual page was written by Arturo Borrero Gonzalez
<arturo@debian.org> for the Debian project, but may be used by others.
This documentation is free/libre under the terms of the GPLv2+.