| /* |
| * arch/arm64/boot/dts/amlogic/mesonaxg.dtsi |
| * |
| * Copyright (C) 2017 Amlogic, Inc. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/amlogic,axg-clkc.h> |
| #include <dt-bindings/clock/amlogic,axg-audio-clk.h> |
| #include <dt-bindings/iio/adc/amlogic-saradc.h> |
| #include <dt-bindings/gpio/meson-axg-gpio.h> |
| #include <dt-bindings/pwm/pwm.h> |
| #include <dt-bindings/pwm/meson.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/input/meson_rc.h> |
| #include <dt-bindings/phy/phy-amlogic-pcie.h> |
| |
| / { |
| cpus:cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| cpu-map { |
| cluster0:cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| core2 { |
| cpu = <&CPU2>; |
| }; |
| core3 { |
| cpu = <&CPU3>; |
| }; |
| }; |
| }; |
| CPU0:cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53","arm,armv8"; |
| reg = <0x0 0x0>; |
| enable-method = "psci"; |
| clocks = <&scpi_dvfs 0>; |
| clock-names = "cpu-cluster.0"; |
| cpu-idle-states = <&CPU_SLEEP_0>; |
| }; |
| |
| CPU1:cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53","arm,armv8"; |
| reg = <0x0 0x1>; |
| enable-method = "psci"; |
| clocks = <&scpi_dvfs 0>; |
| clock-names = "cpu-cluster.0"; |
| cpu-idle-states = <&CPU_SLEEP_0>; |
| }; |
| CPU2:cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53","arm,armv8"; |
| reg = <0x0 0x2>; |
| enable-method = "psci"; |
| clocks = <&scpi_dvfs 0>; |
| clock-names = "cpu-cluster.0"; |
| cpu-idle-states = <&CPU_SLEEP_0>; |
| }; |
| |
| CPU3:cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53","arm,armv8"; |
| reg = <0x0 0x3>; |
| enable-method = "psci"; |
| clocks = <&scpi_dvfs 0>; |
| clock-names = "cpu-cluster.0"; |
| cpu-idle-states = <&CPU_SLEEP_0>; |
| }; |
| |
| idle-states { |
| entry-method = "arm,psci-0.2"; |
| CPU_SLEEP_0: cpu-sleep-0 { |
| compatible = "arm,idle-state"; |
| arm,psci-suspend-param = <0x0010000>; |
| local-timer-stop; |
| entry-latency-us = <5000>; |
| exit-latency-us = <5000>; |
| min-residency-us = <15000>; |
| }; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 0xff08>, |
| <GIC_PPI 14 0xff08>, |
| <GIC_PPI 11 0xff08>, |
| <GIC_PPI 10 0xff08>; |
| }; |
| timer_bc { |
| compatible = "arm, meson-bc-timer"; |
| reg= <0x0 0xffd0f190 0x0 0x4 0x0 0xffd0f194 0x0 0x4>; |
| timer_name = "Meson TimerF"; |
| clockevent-rating=<300>; |
| clockevent-shift=<20>; |
| clockevent-features=<0x23>; |
| interrupts = <0 60 1>; |
| bit_enable=<16>; |
| bit_mode=<12>; |
| bit_resolution=<0>; |
| }; |
| |
| arm_pmu { |
| compatible = "arm,armv8-pmuv3"; |
| /* clusterb-enabled; */ |
| interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x0 0xff634680 0x0 0x4>; |
| cpumasks = <0xf>; |
| /* default 10ms */ |
| relax-timer-ns = <10000000>; |
| /* default 10000us */ |
| max-wait-cnt = <10000>; |
| }; |
| |
| gic: interrupt-controller@2c001000 { |
| compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| interrupt-controller; |
| reg = <0x0 0xffc01000 0 0x1000>, |
| <0x0 0xffc02000 0 0x0100>; |
| interrupts = <GIC_PPI 9 0xf04>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| aml_pm { |
| compatible = "amlogic, pm"; |
| device_name = "aml_pm"; |
| status = "okay"; |
| debug_reg = <0xff8000a8>; |
| exit_reg = <0xff80023c>; |
| }; |
| |
| secmon { |
| compatible = "amlogic, secmon"; |
| memory-region = <&secmon_reserved>; |
| in_base_func = <0x82000020>; |
| out_base_func = <0x82000021>; |
| reserve_mem_size = <0x00300000>; |
| }; |
| |
| securitykey { |
| compatible = "aml, securitykey"; |
| storage_query = <0x82000060>; |
| storage_read = <0x82000061>; |
| storage_write = <0x82000062>; |
| storage_tell = <0x82000063>; |
| storage_verify = <0x82000064>; |
| storage_status = <0x82000065>; |
| storage_list = <0x82000067>; |
| storage_remove = <0x82000068>; |
| storage_in_func = <0x82000023>; |
| storage_out_func = <0x82000024>; |
| storage_block_func = <0x82000025>; |
| storage_size_func = <0x82000027>; |
| storage_set_enctype = <0x8200006A>; |
| storage_get_enctype = <0x8200006B>; |
| storage_version = <0x8200006C>; |
| }; |
| |
| rng { |
| compatible = "amlogic,meson-rng"; |
| status = "okay"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| reg = <0x0 0xff634018 0x0 0x4>; |
| quality = /bits/ 16 <1000>; |
| }; |
| |
| mailbox: mhu@c883c400 { |
| compatible = "amlogic, meson_mhu"; |
| reg = <0x0 0xff63c400 0x0 0x4c>, /* MHU registers */ |
| <0x0 0xfffd3000 0x0 0x800>; /* Payload area */ |
| interrupts = <0 209 1>, /* low priority interrupt */ |
| <0 210 1>; /* high priority interrupt */ |
| #mbox-cells = <1>; |
| mbox-names = "cpu_to_scp_low", "cpu_to_scp_high"; |
| mboxes = <&mailbox 0 &mailbox 1>; |
| }; |
| |
| scpi_clocks { |
| compatible = "arm, scpi-clks"; |
| |
| scpi_dvfs: scpi_clocks@0 { |
| compatible = "arm, scpi-clk-indexed"; |
| #clock-cells = <1>; |
| clock-indices = <0>; |
| clock-output-names = "vcpu"; |
| }; |
| |
| }; |
| |
| cpu_iomap { |
| compatible = "amlogic, iomap"; |
| #address-cells=<2>; |
| #size-cells=<2>; |
| ranges; |
| io_cbus_base { |
| reg = <0x0 0xffd00000 0x0 0x100000>; |
| }; |
| io_apb_base { |
| reg = <0x0 0xffe00000 0x0 0x100000>; |
| }; |
| io_aobus_base { |
| reg = <0x0 0xff800000 0x0 0x100000>; |
| }; |
| io_vapb_base { |
| reg = <0x0 0xff900000 0x0 0x050000>; |
| }; |
| io_hiu_base { |
| reg = <0x0 0xff63c000 0x0 0x010000>; |
| }; |
| }; |
| |
| xtal: xtal-clk { |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "xtal"; |
| #clock-cells = <0>; |
| }; |
| |
| rtc{ |
| compatible = "amlogic, aml_vrtc"; |
| alarm_reg_addr = <0xff8000a8>; |
| timer_e_addr = <0xffd0f188>; |
| init_date = "2015/01/01"; |
| status = "okay"; |
| }; |
| |
| cpu_info { |
| compatible = "amlogic, cpuinfo"; |
| status = "okay"; |
| cpuinfo_cmd = <0x82000044>; |
| }; |
| aml_reboot{ |
| compatible = "aml, reboot"; |
| sys_reset = <0x84000009>; |
| sys_poweroff = <0x84000008>; |
| }; |
| dolby_fw: dolby_fw { |
| compatible = "amlogic, dolby_fw"; |
| mem_size = <0x100000>; |
| status = "okay"; |
| }; |
| |
| wdt_ee: watchdog@0xffd0f0d0 { |
| compatible = "amlogic, meson-wdt"; |
| status = "okay"; |
| default_timeout=<10>; |
| reset_watchdog_method=<1>; /* 0:sysfs,1:kernel */ |
| reset_watchdog_time=<2>; |
| shutdown_timeout=<10>; |
| firmware_timeout=<6>; |
| suspend_timeout=<6>; |
| reg = <0x0 0xffd0f0d0 0x0 0x10>; |
| clock-names = "xtal"; |
| clocks = <&xtal>; |
| }; |
| |
| ram-dump { |
| compatible = "amlogic, ram_dump"; |
| status = "okay"; |
| reg = <0x0 0xFF6345E0 0x0 4>; |
| reg-names = "PREG_STICKY_REG8"; |
| store_device = "data"; |
| }; |
| |
| jtag { |
| compatible = "amlogic, jtag"; |
| status = "okay"; |
| select = "disable"; /* disable/apao/apee */ |
| pinctrl-names="jtag_apao_pins", "jtag_apee_pins"; |
| pinctrl-0=<&jtag_apao_pins>; |
| pinctrl-1=<&jtag_apee_pins>; |
| }; |
| |
| pinctrl_aobus: pinctrl@ff800014{ |
| compatible = "amlogic,meson-axg-aobus-pinctrl"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| gpio_ao: ao-bank@ff800014{ |
| reg = <0x0 0xff800014 0x0 0x8>, |
| <0x0 0xff80002c 0x0 0x4>, |
| <0x0 0xff800024 0x0 0x8>; |
| reg-names = "mux", "pull", "gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| }; |
| |
| pinctrl_periphs: pinctrl@ff634480{ |
| compatible = "amlogic,meson-axg-periphs-pinctrl"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| gpio: banks@ff634480{ |
| reg = <0x0 0xff634480 0x0 0x40>, |
| <0x0 0xff6344e8 0x0 0x14>, |
| <0x0 0xff634520 0x0 0x14>, |
| <0x0 0xff634430 0x0 0x3c>; |
| reg-names = "mux", |
| "pull", |
| "pull-enable", |
| "gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| }; |
| |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| cbus: cbus@ffd00000 { |
| compatible = "simple-bus"; |
| reg = <0x0 0xffd00000 0x0 0x25000>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; |
| |
| gpio_intc: interrupt-controller@f080 { |
| compatible = "amlogic,meson-gpio-intc", |
| "amlogic,meson-axg-gpio-intc"; |
| reg = <0x0 0xf080 0x0 0x10>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| amlogic,channel-interrupts = |
| <64 65 66 67 68 69 70 71>; |
| status = "okay"; |
| }; |
| |
| meson_clk_msr { |
| compatible = "amlogic, gxl_measure"; |
| reg = <0x0 0x18004 0x0 0x4 |
| 0x0 0x1800c 0x0 0x4>; |
| }; |
| |
| /*i2c-A*/ |
| i2c0: i2c@1f000 { |
| compatible = "amlogic,meson-axg-i2c"; |
| status = "disabled"; |
| reg = <0x0 0x1f000 0x0 0x20>; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clkc CLKID_I2C>; |
| clock-names = "clk_i2c"; |
| clock-frequency = <100000>; |
| }; |
| |
| /*i2c-B*/ |
| i2c1: i2c@1e000 { |
| compatible = "amlogic,meson-axg-i2c"; |
| status = "disabled"; |
| reg = <0x0 0x1e000 0x0 0x20>; |
| interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clkc CLKID_I2C>; |
| clock-names = "clk_i2c"; |
| clock-frequency = <100000>; |
| }; |
| |
| /*i2c-C*/ |
| i2c2: i2c@1d000 { |
| compatible = "amlogic,meson-axg-i2c"; |
| status = "disabled"; |
| reg = <0x0 0x1d000 0x0 0x20>; |
| interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clkc CLKID_I2C>; |
| clock-names = "clk_i2c"; |
| clock-frequency = <100000>; |
| }; |
| |
| /*i2c-D*/ |
| i2c3: i2c@1c000 { |
| compatible = "amlogic,meson-axg-i2c"; |
| status = "disabled"; |
| reg = <0x0 0x1c000 0x0 0x20>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clkc CLKID_I2C>; |
| clock-names = "clk_i2c"; |
| clock-frequency = <100000>; |
| }; |
| |
| spicc0: spi@13000 { |
| compatible = "amlogic,meson-axg-spicc"; |
| reg = <0x0 0x13000 0x0 0x40>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clkc CLKID_SPICC0>, |
| <&clkc CLKID_SPICC_COMP>; |
| clock-names = "core", "comp"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spicc1: spi@15000 { |
| compatible = "amlogic,meson-axg-spicc"; |
| reg = <0x0 0x15000 0x0 0x40>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clkc CLKID_SPICC1>, |
| <&clkc CLKID_SPICC_COMP>; |
| clock-names = "core", "comp"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; /* end of cbus */ |
| |
| aobus: aobus@ff800000 { |
| compatible = "simple-bus"; |
| reg = <0x0 0xff800000 0x0 0xa000>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0x0 0x0 0x0 0xff800000 0x0 0xa000>; |
| |
| cpu_version { |
| reg=<0x0 0x220 0x0 0x4>; |
| }; |
| |
| aoclkc: clock-controller@0 { |
| compatible = "amlogic,axg-aoclkc"; |
| #clock-cells = <1>; |
| reg = <0x0 0x0 0x0 0x320>; |
| }; |
| |
| i2c_AO: i2c@5000 { |
| compatible = "amlogic,meson-axg-i2c"; |
| status = "disabled"; |
| reg = <0x0 0x05000 0x0 0x20>; |
| interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clkc CLKID_I2C>; |
| clock-names = "clk_i2c"; |
| clock-frequency = <100000>; |
| }; |
| |
| irblaster: meson-irblaster@c0 { |
| compatible = "amlogic, aml_irblaster"; |
| reg = <0x0 0xc0 0x0 0xc>, |
| <0x0 0x40 0x0 0x4>; |
| #irblaster-cells = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&irblaster_pins>; |
| status = "disabled"; |
| }; |
| };/* end of aobus */ |
| |
| periphs: periphs@ff634400 { |
| compatible = "simple-bus"; |
| reg = <0x0 0xff634400 0x0 0x1c00>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0x0 0x0 0x0 0xff634400 0x0 0x1c00>; |
| |
| };/* end of periphs */ |
| |
| hiubus: hiubus@ff63c000 { |
| compatible = "simple-bus"; |
| reg = <0x0 0xff63c000 0x0 0x10000>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x10000>; |
| |
| clkc: clock-controller@0 { |
| compatible = "amlogic,axg-clkc"; |
| #clock-cells = <1>; |
| reg = <0x0 0x0 0x0 0x320>; |
| }; |
| };/* end of hiubus*/ |
| |
| audiobus: audiobus@0xff642000 { |
| compatible = "amlogic, audio-controller", "simple-bus"; |
| reg = <0x0 0xff642000 0x0 0x2000>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>; |
| clkaudio: audio_clocks { |
| compatible = "amlogic, axg-audio-clocks"; |
| #clock-cells = <1>; |
| reg = <0x0 0x0 0x0 0xb0>; |
| }; |
| ddr_manager { |
| compatible = "amlogic, axg-audio-ddr-manager"; |
| interrupts = < |
| GIC_SPI 84 IRQ_TYPE_EDGE_RISING |
| GIC_SPI 85 IRQ_TYPE_EDGE_RISING |
| GIC_SPI 86 IRQ_TYPE_EDGE_RISING |
| GIC_SPI 88 IRQ_TYPE_EDGE_RISING |
| GIC_SPI 89 IRQ_TYPE_EDGE_RISING |
| GIC_SPI 90 IRQ_TYPE_EDGE_RISING |
| >; |
| interrupt-names = |
| "toddr_a", "toddr_b", "toddr_c", |
| "frddr_a", "frddr_b", "frddr_c"; |
| }; |
| };/* end of audiobus*/ |
| }; /* end of soc*/ |
| |
| pwm_ab: pwm@ffd1b000 { |
| compatible = "amlogic,axg-ee-pwm"; |
| reg = <0x0 0xffd1b000 0x0 0x20>; |
| #pwm-cells = <3>; |
| clocks = <&xtal>,<&xtal>,<&xtal>,<&xtal>; |
| clock-names = "clkin0","clkin1","clkin2","clkin3"; |
| /*default xtal 24M clkin0-clkin2 and clkin1-clkin3 |
| *should be set the same |
| */ |
| status = "disabled"; |
| }; |
| pwm_cd: pwm@ffd1a000 { |
| compatible = "amlogic,axg-ee-pwm"; |
| reg = <0x0 0xffd1a000 0x0 0x20>; |
| #pwm-cells = <3>; |
| clocks = <&xtal>,<&xtal>,<&xtal>,<&xtal>; |
| clock-names = "clkin0","clkin1","clkin2","clkin3"; |
| status = "disabled"; |
| }; |
| pwm_aoab: pwm@ff807000 { |
| compatible = "amlogic,axg-ao-pwm"; |
| reg = <0x0 0xff807000 0x0 0x20>; |
| #pwm-cells = <3>; |
| clocks = <&xtal>,<&xtal>,<&xtal>,<&xtal>; |
| clock-names = "clkin0","clkin1","clkin2","clkin3"; |
| status = "disabled"; |
| }; |
| |
| pwm_aocd: pwm@ff802000 { |
| compatible = "amlogic,axg-ao-pwm"; |
| reg = <0x0 0xff802000 0x0 0x20>; |
| #pwm-cells = <3>; |
| clocks = <&xtal>,<&xtal>,<&xtal>,<&xtal>; |
| clock-names = "clkin0","clkin1","clkin2","clkin3"; |
| status = "disabled"; |
| }; |
| |
| remote:rc@0xff808040 { |
| compatible = "amlogic, aml_remote"; |
| dev_name = "meson-remote"; |
| reg = <0x0 0xff808040 0x00 0x44>, /*Multi-format IR controller*/ |
| <0x0 0xff808000 0x00 0x20>; /*Legacy IR controller*/ |
| status = "okay"; |
| protocol = <REMOTE_TYPE_NEC>; |
| interrupts = <0 196 1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&remote_pins>; |
| map = <&custom_maps>; |
| max_frame_time = <200>; /*set software decoder max frame time*/ |
| }; |
| |
| custom_maps:custom_maps { |
| mapnum = <3>; |
| map0 = <&map_0>; |
| map1 = <&map_1>; |
| map2 = <&map_2>; |
| map_0: map_0{ |
| mapname = "amlogic-remote-1"; |
| customcode = <0xfb04>; |
| release_delay = <80>; |
| size = <50>; /*keymap size*/ |
| keymap = <REMOTE_KEY(0x47, KEY_0) |
| REMOTE_KEY(0x13, KEY_1) |
| REMOTE_KEY(0x10, KEY_2) |
| REMOTE_KEY(0x11, KEY_3) |
| REMOTE_KEY(0x0F, KEY_4) |
| REMOTE_KEY(0x0C, KEY_5) |
| REMOTE_KEY(0x0D, KEY_6) |
| REMOTE_KEY(0x0B, KEY_7) |
| REMOTE_KEY(0x08, KEY_8) |
| REMOTE_KEY(0x09, KEY_9) |
| REMOTE_KEY(0x5C, KEY_RIGHTCTRL) |
| REMOTE_KEY(0x51, KEY_F3) |
| REMOTE_KEY(0x50, KEY_F4) |
| REMOTE_KEY(0x40, KEY_F5) |
| REMOTE_KEY(0x4d, KEY_F6) |
| REMOTE_KEY(0x43, KEY_F7) |
| REMOTE_KEY(0x17, KEY_F8) |
| REMOTE_KEY(0x00, KEY_F9) |
| REMOTE_KEY(0x01, KEY_F10) |
| REMOTE_KEY(0x16, KEY_F11) |
| REMOTE_KEY(0x49, KEY_BACKSPACE) |
| REMOTE_KEY(0x06, KEY_PROPS) |
| REMOTE_KEY(0x14, KEY_UNDO) |
| REMOTE_KEY(0x44, KEY_UP) |
| REMOTE_KEY(0x1D, KEY_DOWN) |
| REMOTE_KEY(0x1C, KEY_LEFT) |
| REMOTE_KEY(0x48, KEY_RIGHT) |
| REMOTE_KEY(0x53, KEY_LEFTMETA) |
| REMOTE_KEY(0x45, KEY_PAGEUP) |
| REMOTE_KEY(0x19, KEY_PAGEDOWN) |
| REMOTE_KEY(0x52, KEY_PAUSE) |
| REMOTE_KEY(0x05, KEY_HANGEUL) |
| REMOTE_KEY(0x59, KEY_HANJA) |
| REMOTE_KEY(0x1b, KEY_SCALE) |
| REMOTE_KEY(0x04, KEY_KPCOMMA) |
| REMOTE_KEY(0x1A, KEY_POWER) |
| REMOTE_KEY(0x0A, KEY_TAB) |
| REMOTE_KEY(0x0e, KEY_MUTE) |
| REMOTE_KEY(0x1F, KEY_HOME) |
| REMOTE_KEY(0x1e, KEY_FRONT) |
| REMOTE_KEY(0x07, KEY_COPY) |
| REMOTE_KEY(0x12, KEY_OPEN) |
| REMOTE_KEY(0x54, KEY_PASTE) |
| REMOTE_KEY(0x02, KEY_FIND) |
| REMOTE_KEY(0x4f, KEY_A) |
| REMOTE_KEY(0x42, KEY_B) |
| REMOTE_KEY(0x5d, KEY_C) |
| REMOTE_KEY(0x4c, KEY_D) |
| REMOTE_KEY(0x58, KEY_CUT) |
| REMOTE_KEY(0x55, KEY_CALC)>; |
| }; |
| map_1: map_1{ |
| mapname = "amlogic-remote-2"; |
| customcode = <0xfe01>; |
| release_delay = <80>; |
| size = <53>; |
| keymap = <REMOTE_KEY(0x01, KEY_1) |
| REMOTE_KEY(0x02, KEY_2) |
| REMOTE_KEY(0x03, KEY_3) |
| REMOTE_KEY(0x04, KEY_4) |
| REMOTE_KEY(0x05, KEY_5) |
| REMOTE_KEY(0x06, KEY_6) |
| REMOTE_KEY(0x07, KEY_7) |
| REMOTE_KEY(0x08, KEY_8) |
| REMOTE_KEY(0x09, KEY_9) |
| REMOTE_KEY(0x0a, KEY_0) |
| REMOTE_KEY(0x1F, KEY_FN_F1) |
| REMOTE_KEY(0x15, KEY_MENU) |
| REMOTE_KEY(0x16, KEY_TAB) |
| REMOTE_KEY(0x0c, KEY_CHANNELUP) |
| REMOTE_KEY(0x0d, KEY_CHANNELDOWN) |
| REMOTE_KEY(0x0e, KEY_VOLUMEUP) |
| REMOTE_KEY(0x0f, KEY_VOLUMEDOWN) |
| REMOTE_KEY(0x11, KEY_HOME) |
| REMOTE_KEY(0x1c, KEY_RIGHT) |
| REMOTE_KEY(0x1b, KEY_LEFT) |
| REMOTE_KEY(0x19, KEY_UP) |
| REMOTE_KEY(0x1a, KEY_DOWN) |
| REMOTE_KEY(0x1d, KEY_ENTER) |
| REMOTE_KEY(0x17, KEY_MUTE) |
| REMOTE_KEY(0x49, KEY_FINANCE) |
| REMOTE_KEY(0x43, KEY_BACK) |
| REMOTE_KEY(0x12, KEY_FN_F4) |
| REMOTE_KEY(0x14, KEY_FN_F5) |
| REMOTE_KEY(0x18, KEY_FN_F6) |
| REMOTE_KEY(0x59, KEY_INFO) |
| REMOTE_KEY(0x5a, KEY_STOPCD) |
| REMOTE_KEY(0x10, KEY_POWER) |
| REMOTE_KEY(0x42, KEY_PREVIOUSSONG) |
| REMOTE_KEY(0x44, KEY_NEXTSONG) |
| REMOTE_KEY(0x1e, KEY_REWIND) |
| REMOTE_KEY(0x4b, KEY_FASTFORWARD) |
| REMOTE_KEY(0x58, KEY_PLAYPAUSE) |
| REMOTE_KEY(0x46, KEY_PROPS) |
| REMOTE_KEY(0x40, KEY_UNDO) |
| REMOTE_KEY(0x38, KEY_SCROLLLOCK) |
| REMOTE_KEY(0x57, KEY_FN) |
| REMOTE_KEY(0x5b, KEY_FN_ESC) |
| REMOTE_KEY(0x54, KEY_RED) |
| REMOTE_KEY(0x4c, KEY_GREEN) |
| REMOTE_KEY(0x4e, KEY_YELLOW) |
| REMOTE_KEY(0x55, KEY_BLUE) |
| REMOTE_KEY(0x53, KEY_BLUETOOTH) |
| REMOTE_KEY(0x52, KEY_WLAN) |
| REMOTE_KEY(0x39, KEY_CAMERA) |
| REMOTE_KEY(0x41, KEY_SOUND) |
| REMOTE_KEY(0x0b, KEY_QUESTION) |
| REMOTE_KEY(0x00, KEY_CHAT) |
| REMOTE_KEY(0x13, KEY_SEARCH)>; |
| }; |
| map_2: map_2{ |
| mapname = "amlogic-remote-3"; |
| customcode = <0xbd02>; |
| release_delay = <80>; |
| size = <17>; |
| keymap = <REMOTE_KEY(0xca,103) |
| REMOTE_KEY(0xd2,108) |
| REMOTE_KEY(0x99,105) |
| REMOTE_KEY(0xc1,106) |
| REMOTE_KEY(0xce,97) |
| REMOTE_KEY(0x45,116) |
| REMOTE_KEY(0xc5,133) |
| REMOTE_KEY(0x80,113) |
| REMOTE_KEY(0xd0,15) |
| REMOTE_KEY(0xd6,125) |
| REMOTE_KEY(0x95,102) |
| REMOTE_KEY(0xdd,104) |
| REMOTE_KEY(0x8c,109) |
| REMOTE_KEY(0x89,131) |
| REMOTE_KEY(0x9c,130) |
| REMOTE_KEY(0x9a,120) |
| REMOTE_KEY(0xcd,121)>; |
| }; |
| }; |
| i2c_slave:i2c_slave@ff806000{ |
| compatible = "amlogic, meson-i2c-slave"; |
| status = "disabled"; |
| reg = <0x0 0xff806000 0x0 0x20>; |
| interrupts = <0 194 1>; |
| pinctrl-names="default"; |
| pinctrl-0=<&i2c_slave_pin>; |
| }; |
| |
| aml_dma { |
| compatible = "amlogic,aml_txlx_dma"; |
| reg = <0x0 0xff63e000 0x0 0x48>; |
| interrupts = <0 180 1>; |
| |
| aml_aes { |
| compatible = "amlogic,aes_dma"; |
| dev_name = "aml_aes_dma"; |
| status = "okay"; |
| }; |
| |
| aml_sha { |
| compatible = "amlogic,sha_dma"; |
| dev_name = "aml_sha_dma"; |
| status = "okay"; |
| }; |
| }; |
| |
| saradc:saradc { |
| compatible = "amlogic,meson-axg-saradc"; |
| status = "okay"; |
| #io-channel-cells = <1>; |
| clocks = <&xtal>, <&clkc CLKID_SARADC_GATE>; |
| clock-names = "xtal", "saradc_clk"; |
| interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; |
| reg = <0x0 0xff809000 0x0 0x38>; |
| }; |
| efuse: efuse{ |
| compatible = "amlogic, efuse"; |
| read_cmd = <0x82000030>; |
| write_cmd = <0x82000031>; |
| get_max_cmd = <0x82000033>; |
| key = <&efusekey>; |
| clocks = <&clkc CLKID_EFUSE>; |
| clock-names = "efuse_clk"; |
| status = "disabled"; |
| }; |
| |
| efusekey:efusekey{ |
| keynum = <4>; |
| key0 = <&key_0>; |
| key1 = <&key_1>; |
| key2 = <&key_2>; |
| key3 = <&key_3>; |
| key_0:key_0{ |
| keyname = "mac"; |
| offset = <0>; |
| size = <6>; |
| }; |
| key_1:key_1{ |
| keyname = "mac_bt"; |
| offset = <6>; |
| size = <6>; |
| }; |
| key_2:key_2{ |
| keyname = "mac_wifi"; |
| offset = <12>; |
| size = <6>; |
| }; |
| key_3:key_3{ |
| keyname = "usid"; |
| offset = <18>; |
| size = <16>; |
| }; |
| }; |
| |
| audio_data: audio_data { |
| compatible = "amlogic, audio_data"; |
| query_licence_cmd = <0x82000050>; |
| status = "disabled"; |
| }; |
| |
| ddr_bandwidth { |
| compatible = "amlogic, ddr-bandwidth"; |
| status = "okay"; |
| reg = <0x0 0xff638000 0x0 0x100 |
| 0x0 0xff637000 0x0 0x100>; |
| sec_base = <0xda838400>; |
| interrupts = <0 52 1>; |
| interrupt-names = "ddr_bandwidth"; |
| }; |
| dmc_monitor { |
| compatible = "amlogic, dmc_monitor"; |
| status = "okay"; |
| reg_base = <0xff638800>; |
| interrupts = <0 51 1>; |
| }; |
| |
| cpu_ver_name{ |
| compatible = "amlogic, cpu-major-id-axg"; |
| }; |
| |
| defendkey: defendkey { |
| compatible = "amlogic, defendkey"; |
| mem_size = <0x0 0x100000>; |
| status = "okay"; |
| }; |
| };/* end of / */ |
| |
| &pinctrl_aobus { |
| remote_pins:remote_pin { |
| mux { |
| groups = "remote_input_ao"; |
| function = "remote_input_ao"; |
| }; |
| }; |
| |
| irblaster_pins:irblaster_pin { |
| mux { |
| groups = "remote_out_ao"; |
| function = "remote_out_ao"; |
| }; |
| }; |
| |
| ao_uart_pins:ao_uart { |
| mux { |
| groups = "uart_ao_tx_a", |
| "uart_ao_rx_a"; |
| function = "uart_ao_a"; |
| }; |
| }; |
| |
| ao_b_1_uart_pins:ao_b_1_uart { |
| mux { |
| groups = "uart_ao_tx_b", |
| "uart_ao_rx_b"; |
| function = "uart_ao_b"; |
| }; |
| }; |
| |
| ao_i2c_master:ao_i2c{ |
| mux { |
| groups = "i2c_ao_sck_4", |
| "i2c_ao_sda_5"; |
| function = "i2c_ao"; |
| }; |
| }; |
| |
| ao_i2c_master_pin1:ao_i2c_pin1{ |
| mux { |
| groups = "i2c_ao_sck_8", |
| "i2c_ao_sda_9"; |
| function = "i2c_ao"; |
| }; |
| }; |
| |
| ao_i2c_master_pin2:ao_i2c_pin2{ |
| mux { |
| groups = "i2c_ao_sck_10", |
| "i2c_ao_sda_11"; |
| function = "i2c_ao"; |
| }; |
| }; |
| |
| i2c_slave_pin:s_i2c{ |
| mux { |
| groups = "i2c_ao_slave_sck", |
| "i2c_ao_slave_sda"; |
| function = "i2c_ao_slave"; |
| }; |
| }; |
| |
| jtag_apao_pins:jtag_apao_pin { |
| mux { |
| groups = "jtag_ao_tdi", |
| "jtag_ao_tdo", |
| "jtag_ao_clk", |
| "jtag_ao_tms"; |
| function = "jtag_ao"; |
| }; |
| }; |
| }; /* end of pinctrl_aobus */ |
| |
| &pinctrl_periphs { |
| external_eth_pins:external_eth_pins { |
| mux { |
| groups = "eth_mdio_y", |
| "eth_mdc_y", |
| "eth_rgmii_rx_clk_y", |
| "eth_rx_dv_y", |
| "eth_rxd0_y", |
| "eth_rxd1_y", |
| "eth_rxd2_rgmii", |
| "eth_rxd3_rgmii", |
| "eth_rgmii_tx_clk", |
| "eth_txen_y", |
| "eth_txd0_y", |
| "eth_txd1_y", |
| "eth_txd2_rgmii", |
| "eth_txd3_rgmii"; |
| function = "eth"; |
| }; |
| }; |
| |
| ao_b_uart_pins:ao_b_uart { |
| mux { |
| groups = "uart_ao_tx_b_z", |
| "uart_ao_rx_b_z"; |
| function = "uart_ao_b"; |
| }; |
| }; |
| |
| a_uart_pins:a_uart { |
| mux { |
| groups = "uart_tx_a", |
| "uart_rx_a", |
| "uart_cts_a", |
| "uart_rts_a"; |
| function = "uart_a"; |
| }; |
| }; |
| |
| b_uart_pins:b_uart { |
| mux { |
| groups = "uart_tx_b_z", |
| "uart_rx_b_z"; |
| function = "uart_b"; |
| }; |
| }; |
| |
| a_i2c_master:a_i2c { |
| mux { |
| groups = "i2c0_sck", |
| "i2c0_sda"; |
| function = "i2c0"; |
| }; |
| }; |
| |
| b_i2c_master:b_i2c { |
| mux { |
| groups = "i2c1_sck_z", |
| "i2c1_sda_z"; |
| function = "i2c1"; |
| }; |
| }; |
| |
| b_i2c_master_pin1:b_i2c_pin1 { |
| mux { |
| groups = "i2c1_sck_x", |
| "i2c1_sda_x"; |
| function = "i2c1"; |
| }; |
| }; |
| |
| c_i2c_master:c_i2c { |
| mux { |
| groups = "i2c2_sck_x", |
| "i2c2_sda_x"; |
| function = "i2c2"; |
| }; |
| }; |
| |
| c_i2c_master_pin1:c_i2c_pin1 { |
| mux { |
| groups = "i2c2_sck_a", |
| "i2c2_sda_a"; |
| function = "i2c2"; |
| }; |
| }; |
| |
| d_i2c_master:d_i2c { |
| mux { |
| groups = "i2c3_sda_a6", |
| "i2c3_sck_a7"; |
| function = "i2c3"; |
| }; |
| }; |
| |
| d_i2c_master_pin1:d_i2c_pin1 { |
| mux { |
| groups = "i2c3_sda_a12", |
| "i2c3_sck_a13"; |
| function = "i2c3"; |
| }; |
| }; |
| |
| d_i2c_master_pin2:d_i2c_pin2 { |
| mux { |
| groups = "i2c3_sda_a19", |
| "i2c3_sck_a20"; |
| function = "i2c3"; |
| }; |
| }; |
| |
| spi0_pins: spi0 { |
| mux { |
| groups = "spi0_clk", |
| "spi0_mosi", |
| "spi0_miso"; |
| function = "spi0"; |
| }; |
| }; |
| |
| spi1_a_pins: spi1_a { |
| mux { |
| groups = "spi1_clk_a", |
| "spi1_mosi_a", |
| "spi1_miso_a"; |
| function = "spi1"; |
| }; |
| }; |
| |
| spi1_x_pins: spi1_x { |
| mux { |
| groups = "spi1_clk_x", |
| "spi1_mosi_x", |
| "spi1_miso_x"; |
| function = "spi1"; |
| }; |
| }; |
| |
| nand_pulldown: nand_pulldown { |
| mux { |
| groups = "emmc_nand_d0", |
| "emmc_nand_d1", |
| "emmc_nand_d2", |
| "emmc_nand_d3", |
| "emmc_nand_d4", |
| "emmc_nand_d5", |
| "emmc_nand_d6", |
| "emmc_nand_d7"; |
| function = "nand"; |
| bias-pull-down; |
| }; |
| }; |
| |
| nand_pullup: nand_pullup { |
| mux { |
| groups = "nand_ce0"; |
| function = "nand"; |
| bias-pull-up; |
| }; |
| }; |
| |
| all_nand_pins: all_nand_pins { |
| mux { |
| groups = "emmc_nand_d0", |
| "emmc_nand_d1", |
| "emmc_nand_d2", |
| "emmc_nand_d3", |
| "emmc_nand_d4", |
| "emmc_nand_d5", |
| "emmc_nand_d6", |
| "emmc_nand_d7", |
| "nand_ce0", |
| "nand_ale", |
| "nand_cle", |
| "nand_wen_clk", |
| "nand_ren_wr"; |
| function = "nand"; |
| input-enable; |
| }; |
| }; |
| |
| nand_cs_pins: nand_cs { |
| mux { |
| groups = "nand_ce0"; |
| function = "nand"; |
| }; |
| }; |
| |
| emmc_clk_cmd_pins:emmc_clk_cmd_pins { |
| mux { |
| groups = "emmc_clk", |
| "emmc_cmd"; |
| function = "emmc"; |
| input-enable; |
| bias-pull-up; |
| }; |
| }; |
| |
| |
| emmc_conf_pull_up:emmc_conf_pull_up { |
| mux { |
| groups = "emmc_nand_d0", |
| "emmc_nand_d1", |
| "emmc_nand_d2", |
| "emmc_nand_d3", |
| "emmc_nand_d4", |
| "emmc_nand_d5", |
| "emmc_nand_d6", |
| "emmc_nand_d7", |
| "emmc_clk", |
| "emmc_cmd"; |
| function = "emmc"; |
| input-enable; |
| bias-pull-up; |
| }; |
| }; |
| |
| emmc_conf_pull_done:emmc_conf_pull_done { |
| mux { |
| groups = "emmc_ds"; |
| function = "emmc"; |
| input-enable; |
| bias-pull-down; |
| }; |
| }; |
| |
| sdio_clk_cmd_pins:sdio_clk_cmd_pins { |
| mux { |
| groups = "sdio_clk", |
| "sdio_cmd"; |
| function = "sdio"; |
| input-enable; |
| bias-pull-up; |
| }; |
| }; |
| |
| sdio_all_pins:sdio_all_pins { |
| mux { |
| groups = "sdio_d0", |
| "sdio_d1", |
| "sdio_d2", |
| "sdio_d3", |
| "sdio_clk", |
| "sdio_cmd"; |
| function = "sdio"; |
| input-enable; |
| bias-pull-up; |
| }; |
| }; |
| |
| wifi_32k_pins:wifi_32k_pins { |
| mux { |
| groups ="pwm_a_x20"; |
| function = "pwm_a"; |
| }; |
| }; |
| |
| jtag_apee_pins:jtag_apee_pin { |
| mux { |
| groups = "jtag_tdo_x", |
| "jtag_tdi_x", |
| "jtag_clk_x", |
| "jtag_tms_x"; |
| function = "jtag_ee"; |
| }; |
| }; |
| }; /* end of pinctrl_periphs */ |
| |