| ########################################## | |
| ########## Amlogic Drivers ############### | |
| ########################################## | |
| # GKI extern modules if enabled AMLOGIC_GKI | |
| obj-$(CONFIG_AMLOGIC_MESON_CPUFREQ) += cpufreq/ | |
| obj-$(CONFIG_AMLOGIC_SEC) += secmon/ | |
| obj-$(CONFIG_AMLOGIC_EFUSE_UNIFYKEY) += efuse_unifykey/ | |
| obj-$(CONFIG_AMLOGIC_DDR_TOOL) += ddr_tool/ | |
| obj-$(CONFIG_AMLOGIC_CRYPTO_DMA) += crypto/ | |
| obj-$(CONFIG_AMLOGIC_MHU_MBOX) += mailbox/ | |
| obj-$(CONFIG_AMLOGIC_REG_ACCESS) += reg_access/ | |
| obj-$(CONFIG_AMLOGIC_MEDIA_ENABLE) += media/ | |
| obj-$(CONFIG_AMLOGIC_PCIE) += pci/ | |
| obj-$(CONFIG_AMLOGIC_THERMAL) += thermal/ | |
| obj-$(CONFIG_AMLOGIC_CLK_DEBUG) += clk_debug/ | |
| obj-$(CONFIG_AMLOGIC_INPUT) += input/ | |
| obj-$(CONFIG_AMLOGIC_TEE) += tee/ | |
| obj-$(CONFIG_AMLOGIC_JTAG_MESON) += jtag/ | |
| obj-$(CONFIG_AMLOGIC_GX_REBOOT) += reboot/ | |
| obj-$(CONFIG_AMLOGIC_GKI_TOOL) += gki_tool/ | |
| obj-$(CONFIG_AMLOGIC_HIFI4DSP) += hifi4dsp/ | |
| obj-$(CONFIG_AMLOGIC_DVB_COMPAT) += dvb/ | |
| obj-$(CONFIG_AMLOGIC_DRM) += drm/ | |
| obj-$(CONFIG_AMLOGIC_IRBLASTER) += irblaster/ | |
| obj-$(CONFIG_MTD_NAND_MESON) += mtd/nand/ | |
| obj-$(CONFIG_MTD_RESV_MESON) += mtd/reserve/ | |
| obj-$(CONFIG_MTD_SPI_NAND_MESON) += mtd/spi_nand/ | |
| obj-$(CONFIG_AMLOGIC_AUDIO_DSP) += audiodsp/ | |
| obj-$(CONFIG_AMLOGIC_AMAUDIO) += amaudio/ | |
| obj-$(CONFIG_AMLOGIC_AUDIO_INFO) += audioinfo/ | |
| obj-$(CONFIG_AMLOGIC_ETH_PRIVE) += ethernet/phy/ | |
| obj-$(CONFIG_AMLOGIC_MEDIA_ALGORITHM) += algorithm/ | |
| obj-$(CONFIG_AMLOGIC_GLOBAL_TIMER) += global_timer/ | |
| #Always build in code/modules | |
| obj-$(CONFIG_AMLOGIC_CPUIDLE) += cpuidle/ | |
| obj-$(CONFIG_AMLOGIC_DEFENDKEY) += defendkey/ | |
| obj-$(CONFIG_AMLOGIC_AUTO_CAPTURE) += free_reserved/ | |
| obj-$(CONFIG_AMLOGIC_GX_SUSPEND) += pm/ | |
| obj-$(CONFIG_AMLOGIC_POWER) += power/ | |
| obj-$(CONFIG_AMLOGIC_DEBUG) += debug/ | |
| obj-$(CONFIG_PWM_MESON) += pwm/ | |
| obj-$(CONFIG_AMLOGIC_LED) += led/ | |
| obj-$(CONFIG_AMLOGIC_MEMORY_EXTEND) += memory_ext/ | |
| obj-$(CONFIG_AMLOGIC_WIFI) += wifi/ | |
| obj-$(CONFIG_AMLOGIC_UART) += uart/ | |
| obj-$(CONFIG_AMLOGIC_BT_DEVICE) += bluetooth/ | |
| obj-$(CONFIG_AMLOGIC_SMARTCARD) += smartcard/ | |
| obj-$(CONFIG_AMLOGIC_SMARTCARD) += smartcard_sc2/ | |
| obj-$(CONFIG_MMC_MESON_GX) += mmc/ | |
| obj-$(CONFIG_AMLOGIC_USB) += usb/ | |
| obj-$(CONFIG_AMLOGIC_DVB_DMX) += dvb/ | |
| obj-$(CONFIG_DOLBY_FW) += dolby_fw/ | |
| obj-$(CONFIG_AMLOGIC_CPU_INFO) += cpu_info/ | |
| obj-$(CONFIG_AMLOGIC_SOC_INFO) += soc_info/ | |
| obj-$(CONFIG_GATOR) += gator-driver/ | |
| obj-$(CONFIG_AMLOGIC_MFD) += mfd/ | |
| obj-$(CONFIG_AMLOGIC_REGULATOR) += regulator/ | |
| obj-$(CONFIG_AMLOGIC_MFH_MODULE) += mfh/ | |
| obj-$(CONFIG_MESON_I2C_SLAVE) += i2c_slave/ | |
| obj-$(CONFIG_AMLOGIC_HWSPINLOCK) += aml_hwspinlock/ | |
| KBUILD_CFLAGS_MODULE += $(GKI_EXT_MODULE_PREDEFINE) | |
| all: | |
| @$(MAKE) -C $(KERNEL_SRC) M=$(M) modules $(GKI_EXT_MODULE_CONFIG) | |
| modules_install: | |
| @echo "$(MAKE) INSTALL_MOD_STRIP=1 M=$(M) -C $(KERNEL_SRC) modules_install" | |
| # @$(MAKE) INSTALL_MOD_STRIP=1 M=$(M) -C $(KERNEL_SRC) modules_install | |
| # mkdir -p ${OUT_DIR}/../vendor_lib/modules | |
| # cd ${OUT_DIR}/$(M)/; find -name "*.ko" -exec cp {} ${OUT_DIR}/../vendor_lib/modules/ \; | |
| mkdir -p ${OUT_DIR}/../vendor_lib/modules | |
| (cd ${OUT_DIR}/$(M)/; find -name "dvb_demux.ko" -exec cp {} ${OUT_DIR}/../vendor_lib/modules/ \;) | |
| (cd ${OUT_DIR}/$(M)/; find -name "aml_aucpu.ko" -exec cp {} ${OUT_DIR}/../vendor_lib/modules/ \;) | |
| clean: | |
| $(MAKE) -C $(KERNEL_SRC) M=$(M) clean | |