| TPS62864 Voltage regulators |
| |
| Required properties: |
| - compatible: Must be one of the following. |
| "ti,tps62864" |
| "ti,tps62866", |
| - reg: I2C slave address |
| |
| Optional properties: |
| |
| - ti,enable-vout-discharge: Enable output discharge. This is boolean value. |
| |
| - ti,vout-reg-id: 0 ~ 1. VOUT register number. |
| TPS628640AYCG, TPS628660AYCG: |
| VSET/VID: |
| ti,vout-reg-id = <0> if this pin is pulled low |
| ti,vout-reg-id = <1> if this pin is pulled high |
| TPS628640BYCG, TPS628660BYCG, TPS628640DYCG, TPS628660DYCG |
| VSET/PG: ti,vout-reg-id = <0> |
| |
| Any property defined as part of the core regulator binding, defined in |
| regulator.txt, can also be used. |
| |
| Example: |
| |
| tps62864: tps62864@40 { |
| compatible = "ti,tps62864"; |
| reg = <0x40>; |
| regulator-name = "tps62864-regulator"; |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1675000>; |
| regulator-boot-on; |
| ti,vout-reg-id = <0>; |
| ti,enable-vout-discharge; |
| }; |
