| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2019 Amlogic, Inc. All rights reserved. |
| */ |
| |
| /dts-v1/; |
| |
| #include "meson-s4.dtsi" |
| #include "mesons4_drm.dtsi" |
| #include "partition_mbox_ab.dtsi" |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| model = "Amlogic"; |
| amlogic-dt-id = "s4_s905y4_ap229"; |
| compatible = "amlogic, s4"; |
| interrupt-parent = <&gic>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| serial0 = &uart_B; |
| serial1 = &uart_A; |
| serial2 = &uart_C; |
| serial3 = &uart_D; |
| serial4 = &uart_E; |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| i2c2 = &i2c2; |
| i2c3 = &i2c3; |
| i2c4 = &i2c4; |
| spi0 = &spifc; |
| spi1 = &spicc0; |
| tsensor0 = &p_tsensor; |
| }; |
| |
| memory@00000000 { |
| device_type = "memory"; |
| linux,usable-memory = <0x0 0x80000000>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| /* global autoconfigured region for contiguous allocations */ |
| ramoops@0x07400000 { |
| compatible = "ramoops"; |
| reg = <0x07400000 0x00100000>; |
| record-size = <0x20000>; |
| console-size = <0x40000>; |
| ftrace-size = <0x80000>; |
| pmsg-size = <0x10000>; |
| bconsole-size = <0x10000>; |
| }; |
| |
| secmon_reserved:linux,secmon { |
| compatible = "shared-dma-pool"; |
| reusable; |
| size = <0x3400000>; |
| alignment = <0x400000>; |
| alloc-ranges = <0x05000000 0x3400000>; |
| }; |
| |
| logo_reserved:linux,meson-fb { |
| compatible = "shared-dma-pool"; |
| reusable; |
| size = <0x800000>; |
| alignment = <0x400000>; |
| alloc-ranges = <0x7f800000 0x800000>; |
| }; |
| |
| ion_cma_reserved:linux,ion-dev { |
| compatible = "shared-dma-pool"; |
| reusable; |
| size = <0x5c00000>; |
| alignment = <0x400000>; |
| }; |
| ion_fb_reserved:linux,ion-fb { |
| compatible = "shared-dma-pool"; |
| reusable; |
| /* 1920x1080x4x4 round up 4M align */ |
| size = <0x2400000>; |
| alignment = <0x400000>; |
| }; |
| /*di CMA pool */ |
| di_cma_reserved:linux,di_cma { |
| compatible = "shared-dma-pool"; |
| reusable; |
| /* buffer_size = 3621952(yuv422 8bit) |
| * | 4736064(yuv422 10bit) |
| * | 4074560(yuv422 10bit full pack mode) |
| * 10x3621952=34.6M(0x23) support 8bit |
| * 10x4736064=45.2M(0x2e) support 12bit |
| * 10x4074560=40M(0x28) support 10bit |
| */ |
| //size = <0x0 0x0B000000>; |
| //size = <0x0 0x0>; |
| alignment = <0x400000>; |
| }; |
| |
| /* POST PROCESS MANAGER */ |
| ppmgr_reserved:linux,ppmgr { |
| compatible = "shared-dma-pool"; |
| size = <0x0>; |
| }; |
| |
| codec_mm_cma:linux,codec_mm_cma { |
| compatible = "shared-dma-pool"; |
| reusable; |
| /* ion_codec_mm max can alloc size 80M*/ |
| size = <0x1b000000>; |
| alignment = <0x400000>; |
| linux,contiguous-region; |
| }; |
| |
| /* codec shared reserved */ |
| codec_mm_reserved:linux,codec_mm_reserved { |
| compatible = "amlogic, codec-mm-reserved"; |
| size = <0x0>; |
| alignment = <0x100000>; |
| //no-map; |
| }; |
| |
| /* vdin0 CMA pool */ |
| //vdin0_cma_reserved:linux,vdin0_cma { |
| // compatible = "shared-dma-pool"; |
| // reusable; |
| /* up to 1920x1080 yuv422 8bit and 5 buffers |
| * 1920x1080x2x5 = 20 M |
| */ |
| // size = <0x01400000>; |
| // alignment = <0x400000>; |
| //}; |
| /* vdin1 CMA pool */ |
| vdin1_cma_reserved:linux,vdin1_cma { |
| compatible = "shared-dma-pool"; |
| reusable; |
| /* up to 1920x1080 yuv422 8bit and 5 buffers |
| * 1920x1080x2x5 = 20 M |
| */ |
| size = <0x01400000>; |
| alignment = <0x400000>; |
| }; |
| |
| /* demod_reserved:linux,demod { |
| * compatible = "amlogic, demod-mem"; |
| * size = <0x6400000>; //8M //100m 0x6400000 |
| * alloc-ranges = <0x0 0x30000000>; |
| * //multi-use; |
| * //no-map; |
| * }; |
| */ |
| |
| demod_cma_reserved:linux,demod_cma { |
| compatible = "shared-dma-pool"; |
| reusable; |
| /* 20M */ |
| size = <0x0>; |
| alignment = <0x400000>; |
| }; |
| }; |
| codec_mm { |
| compatible = "amlogic, codec, mm"; |
| memory-region = <&codec_mm_cma &codec_mm_reserved>; |
| dev_name = "codec_mm"; |
| status = "okay"; |
| }; |
| amdolby_vision { |
| compatible = "amlogic, dolby_vision_sc2"; |
| dev_name = "aml_amdolby_vision_driver"; |
| status = "disabled"; |
| tv_mode = <0>;/*1:enabel ;0:disable*/ |
| }; |
| cvbsout { |
| compatible = "amlogic, cvbsout-s4"; |
| status = "okay"; |
| |
| /* clk path */ |
| /* 0:vid_pll vid2_clk */ |
| /* 1:gp0_pll vid2_clk */ |
| /* 2:vid_pll vid1_clk */ |
| /* 3:gp0_pll vid1_clk */ |
| clk_path = <0>; |
| |
| /* performance: reg_address, reg_value */ |
| /* s4 */ |
| performance_pal = <0x1bf0 0x9 /* default Matrx625 CTCC value*/ |
| 0x1b12 0x80c0 |
| 0x1b05 0xf7 |
| 0x1b56 0x333 |
| 0x1c59 0xf25c |
| 0xffff 0x0>; /* ending flag */ |
| performance = <0x1bf0 0x9 /* ccitt033 SVA value */ |
| 0x1b12 0x8040 |
| 0x1b05 0xfd |
| 0x1b56 0x333 |
| 0x1c59 0xf654 |
| 0xffff 0x0>; /* ending flag */ |
| performance_ntsc = <0x1bf0 0x9 |
| 0x1b12 0x8020 |
| 0x1b03 0x0 |
| 0x1b04 0x0 |
| 0x1b05 0x0 |
| 0x1b06 0x0 |
| 0x1b56 0x333 |
| 0x1c59 0xf850 |
| 0xffff 0x0>; /* ending flag */ |
| }; |
| |
| dvb-extern { |
| compatible = "amlogic, dvb-extern"; |
| dev_name = "dvb-extern"; |
| status = "okay"; |
| |
| /* dvb hardware main power. */ |
| dvb_power_gpio = <&gpio GPIOZ_5 GPIO_ACTIVE_HIGH>; |
| dvb_power_value = <1>; |
| dvb_power_dir = <0>; /* 0: out, 1: in. */ |
| |
| fe_num = <3>; /* interal 2 * dvb-c, extern 1 * dvb-s */ |
| fe0_demod = "internal"; |
| fe0_tuner0 = <0>; /* use tuner0 */ |
| |
| fe1_demod = "internal"; |
| fe1_tuner0 = <1>; /* use tuner1 */ |
| |
| fe2_demod = "cxd2856"; |
| fe2_i2c_adap_id = <&i2c4>; |
| fe2_demod_i2c_addr = <0xD8>; |
| fe2_reset_value = <0>; |
| fe2_reset_gpio = <&gpio GPIOZ_4 GPIO_ACTIVE_HIGH>; |
| fe2_reset_dir = <0>; /* 0: out, 1: in. */ |
| fe2_ant_poweron_value = <0>; |
| fe2_ant_power_gpio = <&gpio GPIOH_9 GPIO_ACTIVE_HIGH>; |
| fe2_ts = <0>; |
| fe2_tuner1 = <3>; /* use tuner3, only S. */ |
| |
| tuner_num = <4>; /* tuner number, multi tuner support */ |
| tuner0_name = "r836_tuner"; |
| tuner0_i2c_adap = <&i2c3>; |
| tuner0_i2c_addr = <0x1a>; /* 7bit */ |
| tuner0_xtal = <0>; /* 0: 16MHz, 1: 24MHz */ |
| tuner0_xtal_mode = <0>; |
| /* NO_SHARE_XTAL(0) |
| * SLAVE_XTAL_SHARE(3) |
| */ |
| tuner0_xtal_cap = <16>; |
| tuner0_lt_out = <1>; |
| |
| tuner1_name = "r836_tuner"; |
| tuner1_i2c_adap = <&i2c3>; |
| tuner1_i2c_addr = <0x3a>; /* 7bit */ |
| tuner1_xtal = <0>; /* 0: 16MHz, 1: 24MHz */ |
| tuner1_xtal_mode = <0>; |
| /* NO_SHARE_XTAL(0) |
| * SLAVE_XTAL_SHARE(3) |
| */ |
| tuner1_xtal_cap = <16>; |
| tuner1_lt_out = <1>; |
| |
| tuner2_name = "av2018_tuner"; |
| tuner2_i2c_adap = <&i2c3>; |
| tuner2_i2c_addr = <0xC4>; /* 8bit */ |
| tuner2_lt_out = <1>; |
| |
| tuner3_name = "av2018_tuner"; |
| tuner3_lt_out = <1>; |
| }; |
| |
| dvb-demux { |
| compatible = "amlogic sc2, dvb-demux"; |
| dev_name = "dvb-demux"; |
| status = "okay"; |
| |
| reg = <0xfe000000 0x480000>; |
| |
| dmxdev_num = <6>; |
| |
| tsn_from = "demod"; |
| |
| /*single demod setting */ |
| ts0_sid = <0x20>; |
| ts0 = "serial-4wire"; /* tsinA: serial-4wire, serial-3wire */ |
| ts0_control = <0x0>; |
| ts0_invert = <0>; |
| |
| ts1_sid = <0x21>; |
| ts1 = "parallel"; |
| ts1_control = <0x0>; |
| ts1_invert = <0>; |
| |
| ts2_sid = <0x22>; |
| ts2 = "parallel"; |
| ts2_control = <0x0>; |
| ts2_invert = <0>; |
| |
| pinctrl-names = "s_ts0"; |
| pinctrl-0 = <&dvb_s_ts0_pins>; |
| }; |
| |
| /* SMC */ |
| smartcard { |
| compatible = "amlogic,smartcard-sc2"; |
| dev_name = "smartcard"; |
| status = "okay"; |
| |
| reg = <0xfe000000 0x480000>; |
| irq_trigger_type = "GPIO_IRQ_LOW"; |
| |
| reset_pin-gpios = <&gpio GPIOH_10 GPIO_ACTIVE_HIGH>; |
| detect_pin-gpios = <&gpio GPIOH_11 GPIO_ACTIVE_HIGH>; |
| enable_5v3v_pin-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; |
| enable_pin-gpios = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; |
| |
| interrupts = <0 174 1>; |
| interrupt-names = "smc0_irq"; |
| /* |
| *Smc clock source, if change this, |
| *you must adjust clk and divider in smartcard.c |
| */ |
| smc0_clock_source = <0>; |
| /*0: high voltage on detect pin indicates card in.*/ |
| smc0_det_invert = <0>; |
| smc0_5v3v_level = <0>; |
| /*Ordinarily,smartcard controller needs a enable pin.*/ |
| smc_need_enable_pin = "yes"; |
| reset_level = <0>; |
| smc0_enable_level = <0>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sd_iso7816_pins>; |
| clocks = <&clkc CLKID_SC_CLK_GATE>; |
| clock-names = "smartcard"; |
| }; |
| |
| ionvideo { |
| compatible = "amlogic, ionvideo"; |
| dev_name = "ionvideo"; |
| status = "okay"; |
| }; |
| |
| amlvideo2_0 { |
| compatible = "amlogic, amlvideo2"; |
| dev_name = "amlvideo2"; |
| status = "okay"; |
| amlvideo2_id = <0>; |
| cma_mode = <1>; |
| }; |
| |
| amlvideo2_1 { |
| compatible = "amlogic, amlvideo2"; |
| dev_name = "amlvideo2"; |
| status = "okay"; |
| amlvideo2_id = <1>; |
| cma_mode = <1>; |
| }; |
| |
| ppmgr { |
| compatible = "amlogic, ppmgr"; |
| memory-region = <&ppmgr_reserved>; |
| dev_name = "ppmgr"; |
| status = "okay"; |
| }; |
| |
| amlvecm { |
| compatible = "amlogic, vecm"; |
| dev_name = "aml_vecm"; |
| status = "okay"; |
| gamma_en = <0>;/*1:enabel ;0:disable*/ |
| wb_en = <0>;/*1:enabel ;0:disable*/ |
| cm_en = <0>;/*1:enabel ;0:disable*/ |
| /*0: 709/601 1: bt2020*/ |
| tx_op_color_primary = <0>; |
| }; |
| |
| multi-di { |
| compatible = "amlogic, dim-s4"; |
| status = "okay"; |
| /* 0:use reserved; 1:use cma; 2:use cma as reserved */ |
| flag_cma = <4>; //<1>; |
| //memory-region = <&di_reserved>; |
| //memory-region = <&di_cma_reserved>; |
| interrupts = <0 203 1 |
| 0 202 1>; |
| interrupt-names = "pre_irq", "post_irq"; |
| clocks = <&clkc CLKID_VPU_CLKB>, |
| <&clkc CLKID_VPU>; |
| clock-names = "vpu_clkb", |
| "vpu_mux"; |
| clock-range = <334 667>; |
| /* buffer-size = <3621952>;(yuv422 8bit) */ |
| buffer-size = <4074560>;/*yuv422 fullpack*/ |
| /* reserve-iomap = "true"; */ |
| /* if enable nr10bit, set nr10bit-support to 1 */ |
| post-wr-support = <1>; |
| nr10bit-support = <1>; |
| nrds-enable = <1>; |
| pps-enable = <1>; |
| }; |
| |
| aml_dtv_demod { |
| compatible = "amlogic, ddemod-s4"; |
| dev_name = "aml_dtv_demod"; |
| status = "okay"; |
| /* diseqc_name = "sgm_41286"; */ |
| pinctrl-names="if_agc_pins"; |
| pinctrl-0=<&dtvdemod_if_agc_pins>; |
| /* pinctrl-1=<&diseqc_out>; */ |
| /* lnb_en-gpios = <&gpio GPIOZ_2 GPIO_ACTIVE_HIGH>; */ |
| /* lnb_sel-gpios = <&gpio GPIOZ_3 GPIO_ACTIVE_HIGH>; */ |
| /* interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; */ |
| /* interrupt-names = "demod_isr"; */ |
| |
| power-domains = <&pwrdm PDID_S4_DEMOD>; |
| /* clocks = <&clkc CLKID_DAC_CLK>; */ |
| /* clock-names = "vdac_clk_gate"; */ |
| |
| reg = <0xfe350000 0x10000 /* dtv demod base */ |
| 0xfe000000 0x2000 /* div base */ |
| 0xff800000 0x1000 /* io_aobus_base */ |
| 0xffd01000 0x1000 /* reset */ |
| >; |
| |
| dtv_demod0_mem = <0>; // need move to aml_dtv_demod ? |
| spectrum = <1>; |
| cma_flag = <1>; |
| cma_mem_size = <0>; |
| memory-region = <&demod_cma_reserved>;//<&demod_reserved>; |
| }; |
| |
| provisionkey { |
| compatible = "amlogic, provisionkey"; |
| status = "disabled"; |
| key-permit-default = "write"; |
| //new key not need add dts if started with KEY_PROVISION_ |
| KEY_PROVISION_XXX { }; |
| //test_my_added_keyname { }; |
| };//End provisionkey |
| |
| unifykey{ |
| compatible = "amlogic,unifykey"; |
| status = "ok"; |
| unifykey-num = <19>; |
| unifykey-index-0 = <&keysn_0>; |
| unifykey-index-1 = <&keysn_1>; |
| unifykey-index-2 = <&keysn_2>; |
| unifykey-index-3 = <&keysn_3>; |
| unifykey-index-4 = <&keysn_4>; |
| unifykey-index-5 = <&keysn_5>; |
| unifykey-index-6 = <&keysn_6>; |
| unifykey-index-7 = <&keysn_7>; |
| unifykey-index-8 = <&keysn_8>; |
| unifykey-index-9 = <&keysn_9>; |
| unifykey-index-10= <&keysn_10>; |
| unifykey-index-11= <&keysn_11>; |
| unifykey-index-12= <&keysn_12>; |
| unifykey-index-13= <&keysn_13>; |
| unifykey-index-14= <&keysn_14>; |
| unifykey-index-15= <&keysn_15>; |
| unifykey-index-16= <&keysn_16>; |
| unifykey-index-17= <&keysn_17>; |
| unifykey-index-18= <&keysn_18>; |
| |
| keysn_0: key_0{ |
| key-name = "usid"; |
| key-device = "normal"; |
| key-permit = "read","write","del"; |
| }; |
| keysn_1:key_1{ |
| key-name = "mac"; |
| key-device = "normal"; |
| key-permit = "read","write","del"; |
| }; |
| keysn_2:key_2{ |
| key-name = "hdcp"; |
| key-device = "secure"; |
| key-type = "sha1"; |
| key-permit = "read","write","del"; |
| }; |
| keysn_3:key_3{ |
| key-name = "secure_boot_set"; |
| key-device = "efuse"; |
| key-permit = "write"; |
| }; |
| keysn_4:key_4{ |
| key-name = "mac_bt"; |
| key-device = "normal"; |
| key-permit = "read","write","del"; |
| key-type = "mac"; |
| }; |
| keysn_5:key_5{ |
| key-name = "mac_wifi"; |
| key-device = "normal"; |
| key-permit = "read","write","del"; |
| key-type = "mac"; |
| }; |
| keysn_6:key_6{ |
| key-name = "hdcp2_tx"; |
| key-device = "normal"; |
| key-permit = "read","write","del"; |
| }; |
| keysn_7:key_7{ |
| key-name = "hdcp2_rx"; |
| key-device = "normal"; |
| key-permit = "read","write","del"; |
| }; |
| keysn_8:key_8{ |
| key-name = "widevinekeybox"; |
| key-device = "secure"; |
| key-permit = "read","write","del"; |
| }; |
| keysn_9:key_9{ |
| key-name = "deviceid"; |
| key-device = "normal"; |
| key-permit = "read","write","del"; |
| }; |
| keysn_10:key_10{ |
| key-name = "hdcp22_fw_private"; |
| key-device = "secure"; |
| key-permit = "read","write","del"; |
| }; |
| keysn_11:key_11{ |
| key-name = "PlayReadykeybox25"; |
| key-device = "secure"; |
| key-permit = "read","write","del"; |
| }; |
| keysn_12:key_12{ |
| key-name = "prpubkeybox";// PlayReady |
| key-device = "secure"; |
| key-permit = "read","write","del"; |
| }; |
| keysn_13:key_13{ |
| key-name = "prprivkeybox";// PlayReady |
| key-device = "secure"; |
| key-permit = "read","write","del"; |
| }; |
| keysn_14:key_14{ |
| key-name = "attestationkeybox";// attestation key |
| key-device = "secure"; |
| key-permit = "read","write","del"; |
| }; |
| keysn_15:key_15{ |
| key-name = "region_code"; |
| key-device = "normal"; |
| key-permit = "read","write","del"; |
| }; |
| keysn_16:key_16{ |
| key-name = "netflix_mgkid"; |
| key-device = "secure"; |
| key-permit = "read","write","del"; |
| }; |
| keysn_17:key_17{ |
| key-name = "attestationdevidbox";// attest dev id box |
| key-device = "secure"; |
| key-permit = "read","write","del"; |
| }; |
| keysn_18:key_18{ |
| key-name = "oemkey"; |
| key-device = "normal"; |
| key-permit = "read","write","del"; |
| }; |
| };//End unifykey |
| |
| efusekey:efusekey{ |
| keynum = <4>; |
| key0 = <&key_0>; |
| key1 = <&key_1>; |
| key2 = <&key_2>; |
| key3 = <&key_3>; |
| key_0:key_0{ |
| keyname = "mac"; |
| offset = <0>; |
| size = <6>; |
| }; |
| key_1:key_1{ |
| keyname = "mac_bt"; |
| offset = <6>; |
| size = <6>; |
| }; |
| key_2:key_2{ |
| keyname = "mac_wifi"; |
| offset = <12>; |
| size = <6>; |
| }; |
| key_3:key_3{ |
| keyname = "usid"; |
| offset = <18>; |
| size = <16>; |
| }; |
| };//End efusekey |
| /* Audio Related start */ |
| auge_sound { |
| compatible = "amlogic, auge-sound-card"; |
| aml-audio-card,name = "AML-AUGESOUND"; |
| |
| /*avout mute gpio*/ |
| //avout_mute-gpios = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>; |
| //spk_mute-gpios = <&gpio GPIOD_2 GPIO_ACTIVE_LOW>; |
| |
| aml-audio-card,dai-link@0 { |
| format = "dsp_a"; |
| mclk-fs = <512>; |
| //continuous-clock; |
| //bitclock-inversion; |
| //frame-inversion; |
| /* master mode */ |
| bitclock-master = <&tdma>; |
| frame-master = <&tdma>; |
| /* slave mode */ |
| /* |
| * bitclock-master = <&tdmacodec>; |
| * frame-master = <&tdmacodec>; |
| */ |
| suffix-name = "alsaPORT-pcm"; |
| tdmacpu: cpu { |
| sound-dai = <&tdma>; |
| dai-tdm-slot-tx-mask = |
| <1>; |
| dai-tdm-slot-rx-mask = |
| <1>; |
| dai-tdm-slot-num = <2>; |
| dai-tdm-slot-width = <16>; |
| system-clock-frequency = <256000>; |
| }; |
| tdmacodec: codec { |
| sound-dai = <&dummy_codec>; |
| }; |
| }; |
| |
| aml-audio-card,dai-link@1 { |
| format = "i2s";// "dsp_a"; |
| mclk-fs = <256>; |
| continuous-clock; |
| //bitclock-inversion; |
| //frame-inversion; |
| /* master mode */ |
| bitclock-master = <&tdmb>; |
| frame-master = <&tdmb>; |
| /* slave mode */ |
| //bitclock-master = <&tdmbcodec>; |
| //frame-master = <&tdmbcodec>; |
| /* suffix-name, sync with android audio hal |
| * what's the dai link used for |
| */ |
| suffix-name = "alsaPORT-i2s"; |
| cpu { |
| sound-dai = <&tdmb>; |
| dai-tdm-slot-tx-mask = <1 1>; |
| dai-tdm-slot-rx-mask = <1 1>; |
| dai-tdm-slot-num = <2>; |
| /* |
| * dai-tdm-slot-tx-mask = |
| * <1 1 1 1 1 1 1 1>; |
| * dai-tdm-slot-rx-mask = |
| * <1 1 1 1 1 1 1 1>; |
| * dai-tdm-slot-num = <8>; |
| */ |
| dai-tdm-slot-width = <32>; |
| system-clock-frequency = <12288000>; |
| }; |
| tdmbcodec: codec { |
| sound-dai = <&amlogic_codec>; |
| }; |
| }; |
| |
| aml-audio-card,dai-link@2 { |
| format = "i2s"; |
| mclk-fs = <256>; |
| //continuous-clock; |
| //bitclock-inversion; |
| //frame-inversion; |
| /* master mode */ |
| bitclock-master = <&tdmc>; |
| frame-master = <&tdmc>; |
| /* slave mode */ |
| //bitclock-master = <&tdmccodec>; |
| //frame-master = <&tdmccodec>; |
| /* suffix-name, sync with android audio hal used for */ |
| cpu { |
| sound-dai = <&tdmc>; |
| dai-tdm-slot-tx-mask = <1 1>; |
| dai-tdm-slot-rx-mask = <1 1>; |
| dai-tdm-slot-num = <2>; |
| dai-tdm-slot-width = <32>; |
| system-clock-frequency = <12288000>; |
| }; |
| tdmccodec: codec { |
| sound-dai = <&dummy_codec>; |
| }; |
| }; |
| |
| aml-audio-card,dai-link@3 { |
| mclk-fs = <64>; |
| /* suffix-name, sync with android audio hal |
| * what's the dai link used for |
| */ |
| suffix-name = "alsaPORT-pdm-builtinmic"; |
| cpu { |
| sound-dai = <&apdm>; |
| }; |
| codec { |
| sound-dai = <&dummy_codec>; |
| }; |
| }; |
| |
| aml-audio-card,dai-link@4 { |
| mclk-fs = <128>; |
| /* suffix-name, sync with android audio hal used for */ |
| suffix-name = "alsaPORT-spdif"; |
| cpu { |
| sound-dai = <&spdifa>; |
| system-clock-frequency = <6144000>; |
| }; |
| codec { |
| sound-dai = <&dummy_codec>; |
| }; |
| }; |
| /* spdif_b to hdmi, only playback */ |
| aml-audio-card,dai-link@5 { |
| mclk-fs = <128>; |
| continuous-clock; |
| /* suffix-name, sync with android audio hal |
| * what's the dai link used for |
| */ |
| suffix-name = "alsaPORT-spdifb"; |
| cpu { |
| sound-dai = <&spdifb>; |
| system-clock-frequency = <6144000>; |
| }; |
| codec { |
| sound-dai = <&dummy_codec>; |
| }; |
| }; |
| |
| aml-audio-card,dai-link@6 { |
| mclk-fs = <256>; |
| continuous-clock; |
| suffix-name = "alsaPORT-loopback"; |
| cpu { |
| sound-dai = <&loopbacka>; |
| system-clock-frequency = <12288000>; |
| }; |
| codec { |
| sound-dai = <&dummy_codec>; |
| }; |
| }; |
| }; |
| |
| picdec { |
| compatible = "amlogic, picdec"; |
| status = "okay"; |
| }; |
| |
| audiolocker: locker { |
| compatible = "amlogic, audiolocker"; |
| clock-names = "lock_out", "lock_in", "out_src", |
| "in_src", "out_calc", "in_ref"; |
| interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "irq"; |
| frequency = <49000000>; /* pll */ |
| dividor = <49>; /* locker's parent */ |
| status = "disabled"; |
| };/* Audio Related end */ |
| |
| adc_keypad { |
| compatible = "amlogic, adc_keypad"; |
| status = "okay"; |
| key_name = "menu", "vol-", "vol+", "esc" ,"home"; |
| key_num = <5>; |
| io-channels = <&saradc 0>; |
| io-channel-names = "key-chan-0"; |
| key_chan = <0 0 0 0 0>; |
| key_code = <139 114 115 174 28>; |
| key_val = <0 143 266 389 512>; //val=voltage/1800mV*1023 |
| key_tolerance = <40 40 40 40 40>; |
| }; |
| }; |
| |
| &pwm_ij { |
| status = "okay"; |
| }; |
| |
| &i2c3 { |
| status = "okay"; |
| pinctrl-names="default"; |
| pinctrl-0=<&i2c3_pins2>; |
| clock-frequency = <300000>; |
| }; |
| |
| &i2c4 { |
| status = "okay"; |
| pinctrl-names="default"; |
| pinctrl-0=<&i2c4_pins3>; |
| clock-frequency = <300000>; |
| }; |
| |
| &vddcpu0 { |
| status = "okay"; |
| }; |
| |
| &CPU0 { |
| multi_tables_available; |
| operating-points-v2 = <&s905y4_opp_table0>, |
| <&s905y4_opp_table1>, |
| <&s905y4_opp_table2>, |
| <&s905y4_opp_table3>; |
| }; |
| |
| &CPU1 { |
| multi_tables_available; |
| operating-points-v2 = <&s905y4_opp_table0>, |
| <&s905y4_opp_table1>, |
| <&s905y4_opp_table2>, |
| <&s905y4_opp_table3>; |
| }; |
| |
| &CPU2 { |
| multi_tables_available; |
| operating-points-v2 = <&s905y4_opp_table0>, |
| <&s905y4_opp_table1>, |
| <&s905y4_opp_table2>, |
| <&s905y4_opp_table3>; |
| }; |
| |
| &CPU3 { |
| multi_tables_available; |
| operating-points-v2 = <&s905y4_opp_table0>, |
| <&s905y4_opp_table1>, |
| <&s905y4_opp_table2>, |
| <&s905y4_opp_table3>; |
| }; |
| |
| &audiobus { |
| tdma: tdm@0 { |
| compatible = "amlogic, t5-snd-tdma"; |
| #sound-dai-cells = <0>; |
| dai-tdm-lane-slot-mask-in = <1>; |
| dai-tdm-lane-slot-mask-out = <1 0>; |
| dai-tdm-clk-sel = <0>; |
| clocks = <&clkaudio CLKID_AUDIO_MCLK_A |
| &clkc CLKID_MPLL0>; |
| clock-names = "mclk", "clk_srcpll"; |
| pinctrl-names = "tdm_pins"; |
| pinctrl-0 = <&tdm_a |
| &tdm_d0_pins |
| &tdm_d1_pins |
| &tdma_clk_pins>; |
| |
| status = "okay"; |
| }; |
| |
| tdmb: tdm@1 { |
| compatible = "amlogic, t5-snd-tdmb"; |
| #sound-dai-cells = <0>; |
| dai-tdm-lane-slot-mask-out = <1 1 1 1>; |
| dai-tdm-clk-sel = <1>; |
| clocks = <&clkaudio CLKID_AUDIO_MCLK_B |
| &clkaudio CLKID_AUDIO_MCLK_PAD0 |
| &clkc CLKID_MPLL1>; |
| clock-names = "mclk", "mclk_pad", "clk_srcpll"; |
| /* |
| * 0: tdmout_a; |
| * 1: tdmout_b; |
| * 2: tdmout_c; |
| * 3: spdifout; |
| * 4: spdifout_b; |
| */ |
| samesource_sel = <3>; |
| |
| /*enable default mclk(12.288M), before extern codec start*/ |
| start_clk_enable = <1>; |
| |
| /*tdm clk tuning enable*/ |
| clk_tuning_enable = <1>; |
| |
| status = "okay"; |
| }; |
| |
| tdmc: tdm@2 { |
| compatible = "amlogic, t5-snd-tdmc"; |
| #sound-dai-cells = <0>; |
| dai-tdm-lane-slot-mask-out = <1>; |
| dai-tdm-clk-sel = <2>; |
| clocks = <&clkaudio CLKID_AUDIO_MCLK_C |
| &clkc CLKID_MPLL2>; |
| clock-names = "mclk", "clk_srcpll"; |
| |
| status = "okay"; |
| }; |
| |
| spdifa: spdif@0 { |
| compatible = "amlogic, tm2-revb-snd-spdif-a"; |
| #sound-dai-cells = <0>; |
| clocks = <&clkc CLKID_MPLL0 |
| &clkc CLKID_FCLK_DIV4 |
| &clkaudio CLKID_AUDIO_GATE_SPDIFIN |
| &clkaudio CLKID_AUDIO_GATE_SPDIFOUT_A |
| &clkaudio CLKID_AUDIO_SPDIFIN |
| &clkaudio CLKID_AUDIO_SPDIFOUT_A>; |
| clock-names = "sysclk", "fixed_clk", "gate_spdifin", |
| "gate_spdifout", "clk_spdifin", "clk_spdifout"; |
| interrupts = |
| <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>; |
| |
| interrupt-names = "irq_spdifin"; |
| pinctrl-names = "spdif_pins", "spdif_pins_mute"; |
| pinctrl-0 = <&spdifout &spdifin>; |
| pinctrl-1 = <&spdifout_a_mute>; |
| |
| /*spdif clk tuning enable*/ |
| clk_tuning_enable = <1>; |
| |
| status = "okay"; |
| }; |
| spdifb: spdif@1 { |
| compatible = "amlogic, tm2-revb-snd-spdif-b"; |
| #sound-dai-cells = <0>; |
| clocks = <&clkc CLKID_MPLL1 /*CLKID_HIFI_PLL*/ |
| &clkaudio CLKID_AUDIO_GATE_SPDIFOUT_B |
| &clkaudio CLKID_AUDIO_SPDIFOUT_B>; |
| clock-names = "sysclk", |
| "gate_spdifout", "clk_spdifout"; |
| |
| status = "okay"; |
| }; |
| apdm: pdm { |
| compatible = "amlogic, sm1-snd-pdm"; |
| #sound-dai-cells = <0>; |
| |
| clocks = <&clkaudio CLKID_AUDIO_GATE_PDM |
| &clkc CLKID_FCLK_DIV3 |
| &clkc CLKID_MPLL3 |
| &clkaudio CLKID_AUDIO_PDMIN0 |
| &clkaudio CLKID_AUDIO_PDMIN1>; |
| clock-names = "gate", |
| "sysclk_srcpll", |
| "dclk_srcpll", |
| "pdm_dclk", |
| "pdm_sysclk"; |
| |
| pinctrl-names = "pdm_pins"; |
| pinctrl-0 = </*&pdmin*/>; |
| |
| /* mode 0~4, defalut:1 */ |
| filter_mode = <1>; |
| |
| status = "okay"; |
| }; |
| |
| asrca: resample@0 { |
| compatible = "amlogic, t5-resample-a"; |
| clocks = <&clkc CLKID_MPLL3 |
| &clkaudio CLKID_AUDIO_MCLK_F |
| &clkaudio CLKID_AUDIO_RESAMPLE_A>; |
| clock-names = "resample_pll", "resample_src", "resample_clk"; |
| /*same with toddr_src |
| * TDMIN_A, 0 |
| * TDMIN_B, 1 |
| * TDMIN_C, 2 |
| * SPDIFIN, 3 |
| * PDMIN, 4 |
| * NONE, |
| * TDMIN_LB, 6 |
| * LOOPBACK, 7 |
| */ |
| resample_module = <4>; |
| status = "disabled"; |
| }; |
| |
| asrcb:resample@1 { |
| compatible = "amlogic, t5-resample-b"; |
| clocks = <&clkc CLKID_MPLL3 |
| &clkaudio CLKID_AUDIO_MCLK_F |
| &clkaudio CLKID_AUDIO_RESAMPLE_B>; |
| clock-names = "resample_pll", "resample_src", "resample_clk"; |
| |
| /*this resample is only used for loopback_A.*/ |
| capture_sample_rate = <16000>; |
| |
| status = "disabled"; |
| }; |
| |
| vad:vad { |
| compatible = "amlogic, snd-vad"; |
| #sound-dai-cells = <0>; |
| |
| clocks = <&clkaudio CLKID_AUDIO_GATE_TOVAD |
| &clkc CLKID_FCLK_DIV5 |
| &clkaudio CLKID_AUDIO_VAD>; |
| clock-names = "gate", "pll", "clk"; |
| |
| interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING |
| GIC_SPI 44 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "irq_wakeup", "irq_frame_sync"; |
| |
| /* |
| * Data src sel: |
| * 0: tdmin_a; |
| * 1: tdmin_b; |
| * 2: tdmin_c; |
| * 3: spdifin; |
| * 4: pdmin; |
| * 5: loopback_b; |
| * 6: tdmin_lb; |
| * 7: loopback_a; |
| */ |
| src = <4>; |
| |
| /* |
| * deal with hot word in user space or kernel space |
| * 0: in user space |
| * 1: in kernel space |
| */ |
| level = <1>; |
| |
| status = "okay"; |
| }; |
| |
| loopbacka:loopback@0 { |
| compatible = "amlogic, t5-loopbacka"; |
| #sound-dai-cells = <0>; |
| |
| clocks = <&clkaudio CLKID_AUDIO_GATE_PDM |
| &clkc CLKID_FCLK_DIV3 |
| &clkc CLKID_MPLL3 |
| &clkaudio CLKID_AUDIO_PDMIN0 |
| &clkaudio CLKID_AUDIO_PDMIN1 |
| &clkc CLKID_MPLL0 |
| &clkaudio CLKID_AUDIO_MCLK_A>; |
| clock-names = "pdm_gate", |
| "pdm_sysclk_srcpll", |
| "pdm_dclk_srcpll", |
| "pdm_dclk", |
| "pdm_sysclk", |
| "tdminlb_mpll", |
| "tdminlb_mclk"; |
| |
| /* datain src |
| * 0: tdmin_a; |
| * 1: tdmin_b; |
| * 2: tdmin_c; |
| * 3: spdifin; |
| * 4: pdmin; |
| */ |
| datain_src = <4>; |
| datain_chnum = <0>; |
| datain_chmask = <0x0>; |
| /* config which data pin for loopback */ |
| datain-lane-mask-in = <0 0 0 0>; |
| |
| /* calc mclk for datalb */ |
| mclk-fs = <256>; |
| |
| /* tdmin_lb src |
| * 0: tdmoutA |
| * 1: tdmoutB |
| * 2: tdmoutC |
| * 3: PAD_TDMINA_DIN*, refer to core pinmux |
| * 4: PAD_TDMINB_DIN*, refer to core pinmux |
| * 5: PAD_TDMINC_DIN*, refer to core pinmux |
| * 6: PAD_TDMINA_D*, oe, refer to core pinmux |
| * 7: PAD_TDMINB_D*, oe, refer to core pinmux |
| */ |
| /* if tdmin_lb >= 3, use external loopback */ |
| datalb_src = <1>; |
| datalb_chnum = <2>; |
| datalb_chmask = <0x3>; |
| /* config which data pin as loopback */ |
| datalb-lane-mask-in = <1 0 0 0>; |
| |
| status = "okay"; |
| }; |
| |
| loopbackb:loopback@1 { |
| compatible = "amlogic, t5-loopbackb"; |
| #sound-dai-cells = <0>; |
| |
| clocks = <&clkaudio CLKID_AUDIO_GATE_PDM |
| &clkc CLKID_FCLK_DIV3 |
| &clkc CLKID_MPLL3 |
| &clkaudio CLKID_AUDIO_PDMIN0 |
| &clkaudio CLKID_AUDIO_PDMIN1 |
| &clkc CLKID_MPLL0 |
| &clkaudio CLKID_AUDIO_MCLK_A>; |
| clock-names = "pdm_gate", |
| "pdm_sysclk_srcpll", |
| "pdm_dclk_srcpll", |
| "pdm_dclk", |
| "pdm_sysclk", |
| "tdminlb_mpll", |
| "tdminlb_mclk"; |
| |
| /* calc mclk for datain_lb */ |
| mclk-fs = <256>; |
| |
| /* datain src |
| * 0: tdmin_a; |
| * 1: tdmin_b; |
| * 2: tdmin_c; |
| * 3: spdifin; |
| * 4: pdmin; |
| */ |
| datain_src = <4>; |
| datain_chnum = <4>; |
| datain_chmask = <0xf>; |
| /* config which data pin for loopback */ |
| datain-lane-mask-in = <1 0 1 0>; |
| |
| /* tdmin_lb src |
| * 0: tdmoutA |
| * 1: tdmoutB |
| * 2: tdmoutC |
| * 3: PAD_TDMINA_DIN*, refer to core pinmux |
| * 4: PAD_TDMINB_DIN*, refer to core pinmux |
| * 5: PAD_TDMINC_DIN*, refer to core pinmux |
| * 6: PAD_TDMINA_D*, oe, refer to core pinmux |
| * 7: PAD_TDMINB_D*, oe, refer to core pinmux |
| */ |
| /* if tdmin_lb >= 3, use external loopback */ |
| datalb_src = <1>; |
| datalb_chnum = <2>; |
| datalb_chmask = <0x3>; |
| /* config which data pin as loopback */ |
| datalb-lane-mask-in = <1 0 0 0>; |
| |
| status = "disabled"; |
| }; |
| aed:effect { |
| compatible = "amlogic, snd-effect-v3"; |
| #sound-dai-cells = <0>; |
| clocks = <&clkaudio CLKID_AUDIO_GATE_EQDRC |
| &clkc CLKID_FCLK_DIV5 |
| &clkaudio CLKID_AUDIO_EQDRC>; |
| clock-names = "gate", "srcpll", "eqdrc"; |
| /* |
| * 0:tdmout_a |
| * 1:tdmout_b |
| * 2:tdmout_c |
| * 3:spdifout |
| * 4:spdifout_b |
| */ |
| eqdrc_module = <1>; |
| /* max 0xf, each bit for one lane, usually one lane */ |
| lane_mask = <0x1>; |
| /* max 0xff, each bit for one channel */ |
| channel_mask = <0x3>; |
| status = "okay"; |
| }; |
| }; /* end of audiobus */ |
| |
| &pinctrl_audio { |
| tdm_d0_pins: tdm_d0_pin { |
| mux { |
| groups = "tdm_d0"; |
| function = "tdmouta_lane0"; |
| }; |
| }; |
| |
| tdm_d1_pins: tdm_d1_pin { |
| mux { |
| groups = "tdm_d1"; |
| function = "tdmina_lane0"; |
| }; |
| }; |
| |
| tdma_clk_pins: tdm_clk_pin { |
| mux { |
| groups = "tdm_sclk0", "tdm_lrclk0"; |
| function = "tdm_clk_outa"; |
| }; |
| }; |
| |
| tdm_d2_pins: tdm_d2_pin { |
| mux { |
| groups = "tdm_d2"; |
| function = "tdmoutb_lane0"; |
| }; |
| }; |
| |
| tdm_d3_pins: tdm_d3_pin { |
| mux { |
| groups = "tdm_d3"; |
| function = "tdmoutb_lane1"; |
| }; |
| }; |
| |
| tdmb_clk_pins: tdm_clk_pin { |
| mux { |
| groups = "tdm_sclk1", "tdm_lrclk1"; |
| function = "tdm_clk_outb"; |
| }; |
| }; |
| }; |
| |
| &periphs_pinctrl { |
| mclk_1_pins: mclk_1_pin { |
| mux { /* GPIOT_0 */ |
| groups = "mclk_1_d"; |
| function = "mclk"; |
| }; |
| }; |
| |
| tdm_a: tdm_a { |
| mux { /* GPIOX_11, GPIOX_10, GPIOX_9, GPIOX_8 */ |
| groups = "tdm_sclk0", |
| "tdm_fs0", |
| "tdm_d0", |
| "tdm_d1"; |
| function = "tdm"; |
| }; |
| }; |
| |
| tdm_b: tdm_b { |
| mux { /* GPIOD_6, GPIOD_7, GPIOX_10, GPIOX_9 */ |
| groups = "tdm_sclk1_d", |
| "tdm_fs1_d", |
| "tdm_d2", |
| "tdm_d3"; |
| function = "tdm"; |
| }; |
| }; |
| |
| pdmin: pdmin { |
| mux { /* GPIOD_8, GPIOD_9,GPIOD_10 */ |
| groups = "pdm_dclk_d", |
| "pdm_din0_d", |
| "pdm_din1_d"; |
| function = "pdm"; |
| }; |
| }; |
| |
| spdifout: spdifout { |
| mux { /* GPIOH_4 */ |
| groups = "spdif_out_h"; |
| function = "spdif_out"; |
| }; |
| }; |
| |
| spdifout_a_mute: spdifout_a_mute { |
| mux { /* GPIOH_4 */ |
| groups = "GPIOH_4"; |
| function = "gpio_periphs"; |
| output-low; |
| }; |
| }; |
| |
| dvb_s_ts0_pins: dvb_s_ts0_pins { |
| tsin_a { |
| groups = "tsin_a_sop", |
| "tsin_a_valid", |
| "tsin_a_clk", |
| "tsin_a_din0"; |
| function = "tsin_a"; |
| }; |
| }; |
| }; /* end of periphs_pinctrl */ |
| |
| &audio_data { |
| status = "okay"; |
| }; |
| |
| &dwc2_a { |
| status = "okay"; |
| /** 0: normal, 1: otg+dwc3 host only, 2: otg+dwc3 device only*/ |
| controller-type = <3>; |
| }; |
| |
| &crg { |
| status = "okay"; |
| }; |
| |
| &usb2_phy_v2 { |
| status = "okay"; |
| portnum = <2>; |
| }; |
| |
| &usb3_phy_v2 { |
| status = "okay"; |
| portnum = <0>; |
| otg = <1>; |
| /*gpio-vbus-power = "GPIOH_6";*/ |
| /*gpios = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;*/ |
| }; |
| |
| &pcie { |
| reset-gpio = <&gpio GPIOX_7 GPIO_ACTIVE_HIGH>; |
| status = "disable"; |
| }; |
| |
| /* SDIO */ |
| &sd_emmc_a { |
| status = "okay"; |
| pinctrl-0 = <&sdio_pins>; |
| pinctrl-1 = <&sdio_clk_gate_pins>; |
| pinctrl-names = "default", "clk-gate"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| bus-width = <4>; |
| cap-sd-highspeed; |
| sd-uhs-sdr50; |
| sd-uhs-sdr104; |
| max-frequency = <200000000>; |
| |
| non-removable; |
| disable-wp; |
| |
| //vmmc-supply = <&vddao_3v3>; |
| //vqmmc-supply = <&vddio_ao1v8>; |
| |
| brcmf: wifi@1 { |
| reg = <1>; |
| compatible = "brcm,bcm4329-fmac"; |
| }; |
| }; |
| |
| /* SD card */ |
| &sd_emmc_b { |
| status = "okay"; |
| pinctrl-0 = <&sdcard_pins>; |
| pinctrl-1 = <&sdcard_clk_gate_pins>; |
| pinctrl-2 = <&sd_1bit_pins>; |
| pinctrl-3 = <&sd_to_ao_uart_clr_pins |
| &sdcard_pins &ao_to_sd_uart_pins>; |
| pinctrl-4 = <&sd_to_ao_uart_clr_pins |
| &sd_1bit_pins &ao_to_sd_uart_pins>; |
| pinctrl-5 = <&sdcard_pins &ao_uart_pins>; |
| pinctrl-6 = <&sd_to_ao_uart_clr_pins |
| &ao_to_sd_uart_pins>; |
| pinctrl-7 = <&sdcard_pins &ao_uart_pins>; |
| pinctrl-8 = <&sd_to_ao_uart_clr_pins |
| &ao_to_sd_uart_pins>; |
| pinctrl-names = "sd_default", |
| "clk-gate", |
| "sd_1bit_pins", |
| "sd_clk_cmd_uart_pins", |
| "sd_1bit_uart_pins", |
| "sd_to_ao_uart_pins", |
| "ao_to_sd_uart_pins", |
| "sd_to_ao_jtag_pins", |
| "ao_to_sd_jtag_pins"; |
| bus-width = <4>; |
| cap-sd-highspeed; |
| // sd-uhs-sdr12; |
| // sd-uhs-sdr25; |
| // sd-uhs-sdr50; |
| // sd-uhs-sdr104; |
| max-frequency = <200000000>; |
| disable-wp; |
| |
| cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_HIGH>; |
| dat1-gpios = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; |
| //vmmc-supply = <&vddao_3v3>; |
| //vqmmc-supply = <&emmc_1v8>; |
| }; |
| |
| &sd_emmc_c { |
| status = "okay"; |
| pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; |
| pinctrl-1 = <&emmc_clk_gate_pins>; |
| pinctrl-names = "default", "clk-gate"; |
| |
| bus-width = <8>; |
| cap-mmc-highspeed; |
| mmc-ddr-1_8v; |
| mmc-hs200-1_8v; |
| // mmc-hs400-1_8v; |
| max-frequency = <200000000>; |
| non-removable; |
| disable-wp; |
| |
| // mmc-pwrseq = <&emmc_pwrseq>; |
| // vmmc-supply = <&vddao_3v3>; |
| // vqmmc-supply = <&vddao_1v8>; |
| }; |
| |
| &mtd_nand { |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pinctrl-names = "nand_norb_mod","nand_cs_only"; |
| pinctrl-0 = <&all_nand_pins>; |
| pinctrl-1 = <&nand_cs_pins>; |
| bl_mode = <1>; |
| fip_copies = <4>; |
| fip_size = <0x200000>; |
| ship_bad_block = <1>; |
| disa_irq_flag = <1>; |
| nand@bootloader { |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| nand-ecc-maximize; |
| partition@0 { |
| label = "bootloader"; |
| reg = <0x0 0x00000000>; |
| }; |
| }; |
| nand@normal { |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| nand-ecc-maximize; |
| |
| partition@0 { |
| label = "bl2e"; |
| reg = <0x0 0x00000000>; |
| }; |
| partition@1 { |
| label = "bl2x"; |
| reg = <0x0 0x00000000>; |
| }; |
| partition@2 { |
| label = "ddrfip"; |
| reg = <0x0 0x00000000>; |
| }; |
| partition@3 { |
| label = "tpl"; |
| reg = <0x0 0x00000000>; |
| }; |
| partition@4 { |
| label = "logo"; |
| reg = <0x0 0x00200000>; |
| }; |
| partition@5 { |
| label = "recovery"; |
| reg = <0x0 0x1000000>; |
| }; |
| partition@6 { |
| label = "boot"; |
| reg = <0x0 0x0F00000>; |
| }; |
| partition@7 { |
| label = "system"; |
| reg = <0x0 0x11800000>; |
| }; |
| partition@8 { |
| label = "data"; |
| reg = <0x0 0xffffffff>; |
| }; |
| }; |
| }; |
| |
| &saradc { |
| status = "okay"; |
| }; |
| |
| ðmac { |
| status = "okay"; |
| phy-handle = <&internal_ephy>; |
| phy-mode = "rmii"; |
| }; |
| |
| &ir { |
| status = "okay"; |
| pinctrl-0 = <&remote_pins>; |
| pinctrl-names = "default"; |
| }; |
| |
| &spicc0 { |
| status = "disabled"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spicc0_pins_x>; |
| cs-gpios = <&gpio GPIOX_10 0>; |
| }; |
| |
| &spifc { |
| status = "disabled"; |
| spi-nor@0 { |
| status = "disabled"; |
| }; |
| }; |
| |
| &fb { |
| status = "disabled"; |
| display_size_default = <1920 1080 1920 2160 32>; |
| mem_size = <0x00800000 0x1980000 0x100000>; |
| logo_addr = "0x7f800000"; |
| mem_alloc = <0>; |
| pxp_mode = <0>; /** 0:normal mode 1:pxp mode */ |
| }; |
| |
| &drm_vpu { |
| status = "okay"; |
| logo_addr = "0x7f800000"; |
| |
| }; |
| |
| &amhdmitx { |
| status = "okay"; |
| }; |
| |
| &drm_amhdmitx { |
| status = "okay"; |
| hdcp = "disabled"; |
| }; |
| |
| &drm_amcvbsout { |
| status = "okay"; |
| }; |
| |
| &drm_lcd { |
| status = "disabled"; |
| }; |
| |
| &vpu { |
| clk_level = <7>; |
| }; |
| |
| /*if you want to use vdin just modify status to "ok"*/ |
| &vdin0 { |
| /*compatible = "amlogic, vdin-sc2";*/ |
| /*memory-region = <&vdin0_cma_reserved>;*/ |
| /*status = "disabled";*/ |
| /* up to 1920x1080 yuv422 8bit and 5 buffers |
| * 1920x1080x2x5 = 20 M |
| */ |
| cma_size = <20>; |
| /*vdin write mem color depth support: |
| *bit0:support 8bit |
| *bit1:support 9bit |
| *bit2:support 10bit |
| *bit3:support 12bit |
| *bit4:support yuv422 10bit full pack mode (from txl new add) |
| */ |
| tv_bit_mode = <0x1>; |
| }; |
| |
| &vdin1 { |
| /*compatible = "amlogic, vdin-sc2";*/ |
| memory-region = <&vdin1_cma_reserved>; |
| /*status = "disabled";*/ |
| /*vdin write mem color depth support: |
| *bit0:support 8bit |
| *bit1:support 9bit |
| *bit2:support 10bit |
| *bit3:support 12bit |
| */ |
| tv_bit_mode = <1>; |
| }; |
| |
| &aml_wifi{ |
| status = "disabled"; |
| interrupt-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_HIGH>; |
| power_on-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &aml_bt { |
| status = "disabled"; |
| reset-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; |
| btwakeup-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; |
| hostwake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &pwm_ef { |
| pinctrl-0 = <&pwm_e_pins1>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &uart_A { |
| status = "okay"; |
| uart-has-rtscts; |
| }; |
| |
| &i2c1 { |
| status = "disabled"; |
| pinctrl-names="default"; |
| pinctrl-0=<&i2c1_pins2>; |
| |
| tas5707_36: tas5707_36@1b { |
| compatible = "ti,tas5707"; |
| #sound-dai-cells = <0>; |
| reg = <0x1b>; |
| status = "okay"; |
| reset_pin = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| tas5707_3a: tas5707_3a@1d { |
| compatible = "ti,tas5707"; |
| #sound-dai-cells = <0>; |
| reg = <0x1d>; |
| status = "okay"; |
| }; |
| }; |
| |
| &gpu { |
| tbl = <&dvfs285_cfg |
| &dvfs400_cfg |
| &dvfs500_cfg |
| &dvfs666_cfg |
| &dvfs850_cfg |
| &dvfs850_cfg>; |
| }; |
| |
| &amlogic_codec { |
| tocodec_inout = <1>; |
| tdmout_index = <1>; |
| }; |
