blob: f491d8b4e24c7b39087bfc0a71db3b18d7cc596c [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* PCI glue for ISHTP provider device (ISH) driver
*
* Copyright (c) 2014-2016, Intel Corporation.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/suspend.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#define CREATE_TRACE_POINTS
#include <trace/events/intel_ish.h>
#include "ishtp-dev.h"
#include "hw-ish.h"
static const struct pci_device_id ish_pci_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CHV_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, BXT_Ax_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, BXT_Bx_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, APL_Ax_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, SPT_Ax_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CNL_Ax_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, GLK_Ax_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CNL_H_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, ICL_MOBILE_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, SPT_H_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CML_LP_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CMP_H_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, EHL_Ax_DEVICE_ID)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, TGL_LP_DEVICE_ID)},
{0, }
};
MODULE_DEVICE_TABLE(pci, ish_pci_tbl);
/**
* ish_event_tracer() - Callback function to dump trace messages
* @dev: ishtp device
* @format: printf style format
*
* Callback to direct log messages to Linux trace buffers
*/
static __printf(2, 3)
void ish_event_tracer(struct ishtp_device *dev, const char *format, ...)
{
if (trace_ishtp_dump_enabled()) {
va_list args;
char tmp_buf[100];
va_start(args, format);
vsnprintf(tmp_buf, sizeof(tmp_buf), format, args);
va_end(args);
trace_ishtp_dump(tmp_buf);
}
}
/**
* ish_init() - Init function
* @dev: ishtp device
*
* This function initialize wait queues for suspend/resume and call
* calls hadware initialization function. This will initiate
* startup sequence
*
* Return: 0 for success or error code for failure
*/
static int ish_init(struct ishtp_device *dev)
{
int ret;
/* Set the state of ISH HW to start */
ret = ish_hw_start(dev);
if (ret) {
dev_err(dev->devc, "ISH: hw start failed.\n");
return ret;
}
/* Start the inter process communication to ISH processor */
ret = ishtp_start(dev);
if (ret) {
dev_err(dev->devc, "ISHTP: Protocol init failed.\n");
return ret;
}
return 0;
}
static const struct pci_device_id ish_invalid_pci_ids[] = {
/* Mehlow platform special pci ids */
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xA309)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xA30A)},
{}
};
static inline bool ish_should_enter_d0i3(struct pci_dev *pdev)
{
return !pm_suspend_via_firmware() || pdev->device == CHV_DEVICE_ID;
}
/**
* ish_probe() - PCI driver probe callback
* @pdev: pci device
* @ent: pci device id
*
* Initialize PCI function, setup interrupt and call for ISH initialization
*
* Return: 0 for success or error code for failure
*/
static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int ret;
struct ish_hw *hw;
unsigned long irq_flag = 0;
struct ishtp_device *ishtp;
struct device *dev = &pdev->dev;
/* Check for invalid platforms for ISH support */
if (pci_dev_present(ish_invalid_pci_ids))
return -ENODEV;
/* enable pci dev */
ret = pcim_enable_device(pdev);
if (ret) {
dev_err(dev, "ISH: Failed to enable PCI device\n");
return ret;
}
/* set PCI host mastering */
pci_set_master(pdev);
/* pci request regions for ISH driver */
ret = pcim_iomap_regions(pdev, 1 << 0, KBUILD_MODNAME);
if (ret) {
dev_err(dev, "ISH: Failed to get PCI regions\n");
return ret;
}
/* allocates and initializes the ISH dev structure */
ishtp = ish_dev_init(pdev);
if (!ishtp) {
ret = -ENOMEM;
return ret;
}
hw = to_ish_hw(ishtp);
ishtp->print_log = ish_event_tracer;
/* mapping IO device memory */
hw->mem_addr = pcim_iomap_table(pdev)[0];
ishtp->pdev = pdev;
/* request and enable interrupt */
ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
if (!pdev->msi_enabled && !pdev->msix_enabled)
irq_flag = IRQF_SHARED;
ret = devm_request_irq(dev, pdev->irq, ish_irq_handler,
irq_flag, KBUILD_MODNAME, ishtp);
if (ret) {
dev_err(dev, "ISH: request IRQ %d failed\n", pdev->irq);
return ret;
}
dev_set_drvdata(ishtp->devc, ishtp);
init_waitqueue_head(&ishtp->suspend_wait);
init_waitqueue_head(&ishtp->resume_wait);
ret = ish_init(ishtp);
if (ret)
return ret;
return 0;
}
/**
* ish_remove() - PCI driver remove callback
* @pdev: pci device
*
* This function does cleanup of ISH on pci remove callback
*/
static void ish_remove(struct pci_dev *pdev)
{
struct ishtp_device *ishtp_dev = pci_get_drvdata(pdev);
ishtp_bus_remove_all_clients(ishtp_dev, false);
ish_device_disable(ishtp_dev);
}
static struct device __maybe_unused *ish_resume_device;
/* 50ms to get resume response */
#define WAIT_FOR_RESUME_ACK_MS 50
/**
* ish_resume_handler() - Work function to complete resume
* @work: work struct
*
* The resume work function to complete resume function asynchronously.
* There are two resume paths, one where ISH is not powered off,
* in that case a simple resume message is enough, others we need
* a reset sequence.
*/
static void __maybe_unused ish_resume_handler(struct work_struct *work)
{
struct pci_dev *pdev = to_pci_dev(ish_resume_device);
struct ishtp_device *dev = pci_get_drvdata(pdev);
int ret;
/* Check the NO_D3 flag to distinguish the resume paths */
if (pdev->dev_flags & PCI_DEV_FLAGS_NO_D3) {
pdev->dev_flags &= ~PCI_DEV_FLAGS_NO_D3;
disable_irq_wake(pdev->irq);
ishtp_send_resume(dev);
/* Waiting to get resume response */
if (dev->resume_flag)
ret = wait_event_interruptible_timeout(dev->resume_wait,
!dev->resume_flag,
msecs_to_jiffies(WAIT_FOR_RESUME_ACK_MS));
/*
* If the flag is not cleared, something is wrong with ISH FW.
* So on resume, need to go through init sequence again.
*/
if (dev->resume_flag)
ish_init(dev);
} else {
/*
* Resume from the D3, full reboot of ISH processor will happen,
* so need to go through init sequence again.
*/
ish_init(dev);
}
}
/**
* ish_suspend() - ISH suspend callback
* @device: device pointer
*
* ISH suspend callback
*
* Return: 0 to the pm core
*/
static int __maybe_unused ish_suspend(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
struct ishtp_device *dev = pci_get_drvdata(pdev);
if (ish_should_enter_d0i3(pdev)) {
/*
* If previous suspend hasn't been asnwered then ISH is likely
* dead, don't attempt nested notification
*/
if (dev->suspend_flag)
return 0;
dev->resume_flag = 0;
dev->suspend_flag = 1;
ishtp_send_suspend(dev);
/* 25 ms should be enough for live ISH to flush all IPC buf */
if (dev->suspend_flag)
wait_event_interruptible_timeout(dev->suspend_wait,
!dev->suspend_flag,
msecs_to_jiffies(25));
if (dev->suspend_flag) {
/*
* It looks like FW halt, clear the DMA bit, and put
* ISH into D3, and FW would reset on resume.
*/
ish_disable_dma(dev);
} else {
/* Set the NO_D3 flag, the ISH would enter D0i3 */
pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
enable_irq_wake(pdev->irq);
}
} else {
/*
* Clear the DMA bit before putting ISH into D3,
* or ISH FW would reset automatically.
*/
ish_disable_dma(dev);
}
return 0;
}
static __maybe_unused DECLARE_WORK(resume_work, ish_resume_handler);
/**
* ish_resume() - ISH resume callback
* @device: device pointer
*
* ISH resume callback
*
* Return: 0 to the pm core
*/
static int __maybe_unused ish_resume(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
struct ishtp_device *dev = pci_get_drvdata(pdev);
ish_resume_device = device;
dev->resume_flag = 1;
schedule_work(&resume_work);
return 0;
}
static SIMPLE_DEV_PM_OPS(ish_pm_ops, ish_suspend, ish_resume);
static struct pci_driver ish_driver = {
.name = KBUILD_MODNAME,
.id_table = ish_pci_tbl,
.probe = ish_probe,
.remove = ish_remove,
.driver.pm = &ish_pm_ops,
};
module_pci_driver(ish_driver);
/* Original author */
MODULE_AUTHOR("Daniel Drubin <daniel.drubin@intel.com>");
/* Adoption to upstream Linux kernel */
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
MODULE_DESCRIPTION("Intel(R) Integrated Sensor Hub PCI Device Driver");
MODULE_LICENSE("GPL");