drivers/amlogic/media/vin/tvin/hdmirx/hdcp_rx_main.h

/*
 * drivers/amlogic/media/vin/tvin/hdmirx/hdcp_main.h
 *
 *              (C) COPYRIGHT 2014 - 2015 SYNOPSYS, INC.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2
 * as published by the Free Software Foundation.
 *
 * is program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 */

#ifndef _HDCP_MAIN_H_
#define _HDCP_MAIN_H_

#ifdef __KERNEL__
#include <linux/ioctl.h>
#else
#include <sys/ioctl.h>
#endif
#include <linux/types.h>

/* need update the version when update firmware */
#define ESM_VERSION	"2.4.84.11.D3"
#define HDCP_RX22_VER "HDCP2.2 RX190104"

#define ESM_HL_DRIVER_SUCCESS                0
#define ESM_HL_DRIVER_FAILED               (-1)
#define ESM_HL_DRIVER_NO_MEMORY            (-2)
#define ESM_HL_DRIVER_NO_ACCESS            (-3)
#define ESM_HL_DRIVER_INVALID_PARAM        (-4)
#define ESM_HL_DRIVER_TOO_MANY_ESM_DEVICES (-5)
#define ESM_HL_DRIVER_USER_DEFINED_ERROR   (-6)

/* ioctl numbers */
enum {
	ESM_NR_MIN = 0x10,
	ESM_NR_INIT,
	ESM_NR_MEMINFO,
	ESM_NR_LOAD_CODE,
	ESM_NR_READ_DATA,
	ESM_NR_WRITE_DATA,
	ESM_NR_MEMSET_DATA,
	ESM_NR_READ_HPI,
	ESM_NR_WRITE_HPI,
	ESM_NR_MAX
};

/*
 * ESM_IOC_INIT: associate file descriptor with the indicated memory.  This
 * must be called before any other ioctl on the file descriptor.
 *
 *   - hpi_base = base address of ESM HPI registers.
 *   - code_base = base address of firmware mem (0 to allocate internally)
 *   - data_base = base address of data memory (0 to allocate internally)
 *   - code_len, data_len = length of firmware and data mem, respectively.
 */
#define ESM_IOC_INIT    _IOW('E', ESM_NR_INIT, struct esm_ioc_meminfo)

/*
 * ESM_IOC_MEMINFO: retrieve memory information from file descriptor.
 *
 * Fills out the meminfo struct, returning the values passed to ESM_IOC_INIT
 * except that the actual base addresses of internal allocations (if any) are
 * reported.
 */
#define ESM_IOC_MEMINFO _IOR('E', ESM_NR_MEMINFO, struct esm_ioc_meminfo)

struct esm_ioc_meminfo {
	__u32 hpi_base;
	__u32 code_base;
	__u32 code_size;
	__u32 data_base;
	__u32 data_size;
};

/*
 * ESM_IOC_LOAD_CODE: write the provided buffer to the firmware memory.
 *
 *   - len = number of bytes in data buffer
 *   - data = data to write to firmware memory.
 *
 * This can only be done once (successfully).  Subsequent attempts will
 * return -EBUSY.
 */
#define ESM_IOC_LOAD_CODE _IOW('E', ESM_NR_LOAD_CODE, struct esm_ioc_code)

struct esm_ioc_code {
	__u32 len;
	__u8 data[];
};

/*
 * ESM_IOC_READ_DATA: copy from data memory.
 * ESM_IOC_WRITE_DATA: copy to data memory.
 *
 *   - offset = start copying at this byte offset into the data memory.
 *   - len    = number of bytes to copy.
 *   - data   = for write, buffer containing data to copy.
 *              for read, buffer to which read data will be written.
 *
 */
#define ESM_IOC_READ_DATA  _IOWR('E', ESM_NR_READ_DATA, struct esm_ioc_data)
#define ESM_IOC_WRITE_DATA  _IOW('E', ESM_NR_WRITE_DATA, struct esm_ioc_data)

/*
 * ESM_IOC_MEMSET_DATA: initialize data memory.
 *
 *   - offset  = start initializatoin at this byte offset into the data memory.
 *   - len     = number of bytes to set.
 *   - data[0] = byte value to write to all indicated memory locations.
 */
#define ESM_IOC_MEMSET_DATA _IOW('E', ESM_NR_MEMSET_DATA, struct esm_ioc_data)

struct esm_ioc_data {
	__u32 offset;
	__u32 len;
	__u8 data[];
};

/*
 * ESM_IOC_READ_HPI: read HPI register.
 * ESM_IOC_WRITE_HPI: write HPI register.
 *
 *   - offset = byte offset of HPI register to access.
 *   - value  = for write, value to write.
 *              for read, location to which result is stored.
 */
#define ESM_IOC_READ_HPI _IOWR('E', ESM_NR_READ_HPI, struct esm_ioc_hpi_reg)
#define ESM_IOC_WRITE_HPI _IOW('E', ESM_NR_WRITE_HPI, struct esm_ioc_hpi_reg)

struct esm_ioc_hpi_reg {
	__u32 offset;
	__u32 value;
};
#endif